A New Deformation Theory with Strain Gradient Effects

A new phenomenological deformation theory with strain gradient effects is proposed. This theory, which belongs to nonlinear elasticity, fits within the framework of general couple stress theory and involves a single material length scale l. In the present theory three rotational degrees of freedom omega(i) are introduced in addition to the conventional three translational degrees of freedom u(i). omega(i) has no direct dependence upon ui and is called the micro-rotation, i.e. the material rotation theta(i) plus the particle relative rotation. The strain energy density is assumed to only be a function of the strain tensor and the overall curvature tensor, which results in symmetric Cauchy stresses. Minimum potential principle is developed for the strain gradient deformation theory version. In the limit of vanishing 1, it reduces to the conventional counterparts: J(2) deformation theory. Equilibrium equations, constitutive relations and boundary conditions are given in details. Comparisons between the present theory and the theory proposed by Shizawa and Zbib (Shizawa, K., Zbib, H.M., 1999. A thermodynamical theory gradient elastoplasticity with dislocation density Censor: fundamentals. Int. J. Plast. 15, 899) are given. With the same hardening law as Fleck et al. (Fleck, N.A., Muller, G.H., Ashby, M.F., Hutchinson, JW., 1994 Strain gradient plasticity: theory and experiment. Acta Metall. Mater 42, 475), the new strain gradient deformation theory is used to investigate two typical examples, i.e. thin metallic wire torsion and ultra-thin metallic beam bend. The results are compared with those given by Fleck et al, 1994 and Stolken and Evans (Stolken, J.S., Evans, A.G., 1998. A microbend test method for measuring the plasticity length scale. Acta Mater. 46, 5109). In addition, it is explained for a unit cell that the overall curvature tensor produced by the overall rotation vector is the work conjugate of the overall couple stress tensor. (C) 2002 Elsevier Science Ltd. All rights reserved.

微薄梁三点弯曲的尺度效应研究

应用高灵敏度的力传感器以及时间序列电子散斑干涉法,同时测出了不同厚度纯镍薄片三点弯曲试件的抗力与变形,得到薄梁中心点处的载荷与挠度曲线.应用Fleck和Hutchinson的偶应力理论,结合平面应变弯曲模型,建立了薄梁处于弹性状态和弹塑性状态的控制方程,应用Runge-Kutta法进行数值求解,并将计算得到的载荷-挠度曲线以及无量纲化弯矩-表面应变曲线和实验结果进行了比较.在理论计算过程中,没有拟合任何材料参数,所有的材料参数均来自实验测量的结果,材料特征尺度也是根据Stolken和Evans的工作给出的.结果表明:应用偶应力理论预测的结果和实验结果符合良好,而经典理论的预测结果与实验不相符合.

工程控制论，新世纪版

 本书的目的是把一般性概括性的理论和实际工程经验很好地结合起来，对工程技术各个系统的自动控制和自动调节理论作一个全面的探讨。它一方面奠定了工程控制论这门技术科学的理论基础，另一方面指出这门新学科今后的几个研究方向。
本书最初是用英文写的。现在的汉文版是在钱学森先生的指导下，翻译英文版并且参照俄文译本略加修改和补充而成。
本书曾荣获中国科学院1956年度一等科学奖金。

秦岭苔类植物的研究和中国剪叶苔属（Herbertus S. Gray）的分类学修订

本论文包括两部分的内容，第一部分是秦岭苔类植物的区系研究，第二部分是中国剪叶苔属Herbertus的分类学修订。 秦岭位于我国的中部，东经104º30´～112º52´，北纬32º50´～34º45´N，约76 500 km2。它主要位于陕西省的南部地区，并包括了河南、甘肃和湖北的部分县、市。秦岭的最高峰是太白山，海拔3 767米。秦岭是长江和黄河的分水岭，也是我国温带和亚热带气候的过渡地带。 本研究包含了对自19世纪开始对秦岭苔藓植物的主要采集活动的回顾，和截止2008年以来对秦岭苔类和角苔类植物报道的总结和分析，且首次给出了一份秦岭地区详细的苔类植物的名录，并包括了各个种在秦岭地区的详细分布。根据目前的研究，现已知秦岭的苔类植物有226种（包括种下单位，以下同），其中角苔纲1科3属6种，苔纲30科59属220种；提出了1个新异名：Radula constricta Steph.被处理为Radula lindenbergiana Gottsche var. atypa Massalongo的异名；并提出了1个新组合Metzgeria pubescens var. kinabaluensis (Kuwah) F.X. Li & Y. Jia；发现秦岭新分布的苔类有78种。根据种数，秦岭地区苔类的优势科为光萼苔科（34种），其次为耳叶苔科（23种），裂叶苔科（23种）和羽苔科（19种）。 通过对这些种地理成分的统计，发现秦岭苔类的地理成分以北温带成分为主，占35.05%；其次是东亚成分占到31.78%，这两种地理成分在秦岭占了很大比例，高达66.83%。热带成分相对较少，有22种，占到10.29%。对于苔类来说，中国特有成分在秦岭地区较多，已知有34种，占到15.89%。说明秦岭地区苔类地理成分以温带为主，热带成分占少量比例，且秦岭地区的特有性也比较高。 文章第二部分是对中国剪叶苔属Herbertus S. Gray的分类学修订。剪叶苔属隶属于剪叶苔科，是一个古老而自然的类群，广泛分布于热带和南北温带地区。剪叶苔属植物由于其叶横生或近于横生，侧叶2裂，腹叶2裂或部分不对称3裂，并具假肋，叶细胞具大的三角体而明显区别于苔类的其它属。虽然这个属的概念比较清楚，但在属内种间的划分上存在较大的问题，是苔类中分类较混乱的一个类群。剪叶苔属种的概念多基于叶片形态，包括裂瓣的顶端细胞和假肋的形态及叶基盘边缘附属物的形态。但这些形态特征具很大的可塑性，性状不稳定，造成该属种的概念很模糊。目前全世界剪叶苔属约100余种。中国剪叶苔属的种类尚不确定，《中国苔藓志》中报道了中国有25种l亚种，但Juslen在2006年对亚洲剪叶苔属的修订中，提到中国分布的仅有6种。二者的研究中都存在有一些疏漏和不足之处，对有些种还有争议；且他们的研究中引证的标本都很少，不能全面反映中国剪叶苔属的种类和分布情况。 本研究着手于中国的剪叶苔属，从模式标本入手，从模式标本入手，结合对前人文献中引证标本的查阅，并检视了全国各大标本馆收藏的大量该属的普通标本，对于分类归并上有争议的种，采用扫描电镜和分子生物学的手段进行实验性的研究，对中国的剪叶苔属进行一个全面系统的分类学修订。期望通过本研究，明确中国剪叶苔属的种类和分布情况，为东亚乃至世界剪叶苔属的分类修订提供一份翔实的资料。共查阅了剪叶苔属26个种的模式标本，并检视了中科院北京植物研究所、华南植物园和深圳仙湖植物园馆藏的大量该属植物标本，约600余份。 通过本研究，提出2个新异名：将H. buchii Juslén和H. longispinus var calvs Massalongo处理为H. dicranus (Taylor) Trevis.；将樱井剪叶苔H. sakuraii (Warnst.) S. Hatt.（原并入H. dicranus）和H. minimus Horik.（原并入H. dicranus）重新提出；发现1个中国新分布：H. setigerus (Steph.) H. A. Mill.；确认中国的剪叶苔属17种1亚种：剪叶苔H. aduncus (Dicks.) Gray，剪叶苔纤细亚种H. aduncus subsp. tenuis (A. Evans) H. A. Mill.et E. B. Bohrer，H. armitanus (Steph.) H. A. Mill.，南亚剪叶苔H. ceylanicus (Steph.) Abeyw.，长角剪叶苔H. dicranus (Taylor) Trevis.，高氏剪叶苔H. gaochienii Fu，广东剪叶苔H. guangdongii P.J. Lin & Piippo，卵叶剪叶苔H. herpocladioides Scott. et. Miller，红枝剪叶苔H. huerlimannii Miller，细指剪叶苔H. kurzii (Steph.) H. A. Mill.，长肋剪叶苔H. longifissus Steph.，长刺剪叶苔H. longispinus Jack et Steph.，H. minimus Horik.，长茎剪叶苔H. parisii (Steph.) H. A. Mill.，多枝剪叶苔H. ramosus (Steph.) H. A. Mill.，樱井剪叶苔H. sakuraii (Warnst.) S. Hatt.，短叶剪叶苔H. sendtneri (Nees) Lindb.和H. setigerus (Steph.) H. A. Mill.。本研究还在扫描电镜下观察了H. armitanus、长角剪叶苔H. dicranus和多枝剪叶苔H. ramosus的孢子形态。对于剪叶苔属的修订，还需要更多模式标本的借阅，随着研究深入，剪叶苔属的种类可能会有大量的减少，中国剪叶苔属的种类也将会有一定的减少。

A Molecular Phylogeny of Macaca Based on Mitochondrial Control Region Sequences

通过线粒体部分控制区DNA 序列数据探讨7 种猕猴属物种的分子系统发育关系。结果表明熊猴的 核苷酸多样度最高, 而藏酋猴核苷酸多样度较低。基于控制区序列数据所构建的最大似然树, 不考虑食蟹猴的 位置, 7 种猕猴物种可粗略地分为3 个种组, 即狮尾猴组(包括北平顶猴) 、头巾猴组(包括红面猴、熊猴和藏 酋猴) 和食蟹猴组(包括恒河猴和台湾猴) 。与前人( Fooden & Lanyon , 1989 ; Tosi et al , 2003a ; Deinard & Smith , 2001 ; Evans et al , 1999 ; Hayasaka et al , 1996 ; Morales &Melnick , 1998) 的结果不同, 我们的结果支 持食蟹猴比北平顶猴分化早的假设; 东部恒河猴(相对于台湾猴) 和东部熊猴(相对于藏酋猴) 出现并系。与 Y染色体、等位酶、核基因以及部分形态学数据推测的结果(Delson , 1980 ; Fooden &Lanyon , 1989 ; Fooden , 1990 ; Tosi et al , 2000 , 2003a , b ; Deinard & Smith , 2001) 一致, 红面猴应归于头巾猴组, 但此结论与前人 (Hayasaka et al , 1996 ; Morales &Melnick , 1998 ; Tosi et al , 2003a) 依据线粒体得到的结果有较大分歧。

四川美姑、汉源黑颈鹤迁徙停歇地环境调查

Eight Black-necked Cranes(Grus nigricollis)were banded with satellite transmitters in the spring of 2005 and 2006 at Dashanbao in Yunnan and Caohai in Guizhou.Six of the banded cranes completed at least one migration between their wintering and breeding grounds.Townships where these birds stopped over include:Wusihe,Henan,Nimei,Liyuan,Yidong,Sanjiaoping,and Huangmu in Hanyuan County,and Liuhong,Yiguojie,Nongzuo,Lamuajue,Bingtu,Wagu,Equgulongmen,and Niha in Meigu County.We surveyed stop-over sites in Hanyuan...

Nest site selection by Black-necked Crane Grus nigricollis in the Ruoergai Wetland, China

From 5 May 2003 to early June 2005, nest site selection of Black-necked Cranes Grits nigricollis was studied at the Ruoergai Wetland Nature Reserve (RWNR), an important breeding area for the species in China. Results showed that the crane nests only in we

大鲵的水下发声与相关行为(英文)

无尾类两栖动物的复杂的声行为对其繁殖与物种的识别具有重要的作用,而有尾类除了少数种类可以发出 微弱的“吱吱”声或吠声外,在过去一直被认为是基本不发声的。但是,最近的基于解剖学的证据的研究显示隐腮 鲵科(Cryptobranchidae)可能是一个例外。为了检验这一假说,作者对实验室严格控制的条件下的4只中国大鲵(An- drias davidianus)进行了观察。观察结果不仅表明动物在水下发声,同时也观察到了与之相关联的行为。作者对进 一步在野生条件下开展研究提出了建议。

Manipulation of host density affects infestation of a peritrich ciliate (Epistylis lacustris) on a calanoid copepod (Leptodiaptomus minutus) in Crystal Lake, Wisconsin, USA

Specimens of the calanoid copepod, Leptodiaptomus minutus, collected in June 1994 in oligotrophic: north temperate Crystal Lake, were infested with the stalked ciliate Epistylis lacustris. E. lacustris was highly specific to L. minutus and no other coexisting zooplankters were infested. Excluding nauplii, nearly 70% of copepods carried 1-20 ciliates, although the maximum load was as high as 250 ciliates. A lower percentage of nauplii were infested by the ciliate; those that were infested had a lower ciliate load than other copepod stages. Infestation by ciliates had no significant influence on the average egg number of female copepods. In a field experiment, higher copepod densities in enclosures resulted in a significantly higher infestation rate, but the ciliate load per individual copepod did not differ significantly among treatments.

Wear resistance of reaction sintered alumina/mullite composites

Alumina and alumina/mullite composites with mullite content of 0.96-8.72 vol.% were subjected to an abrasive wear test under loads of 0.1-2.0 N with a ball-on-disc apparatus. The wear rate and area fraction of pullout f(po) on the worn surfaces were measured. The wear resistances of the alumina/mullite composites were better by a factor of 1-2 than that of pure alumina. The main wear mechanism of alumina is fracture wear, and for alumina/mullite composites, fracture wear and plastic wear mechanisms work together. The influence of mechanical properties on wear resistance was estimated by Evans' method. It was found that the wear rate depends on f(po), and the primary reason for the better wear resistance of alumina/mullite composites is the reduction off, induced by fracture mode transition. (c) 2007 Elsevier B.V. All rights reserved.

大豆超氧岐化酶和品质因素相关性研究

本文进行了大豆种子超氧岐化酶和大豆品质因素（脂肪酸）之间的相关性研究。在这一研究中，我们使用了三种方法：1、HPLC分离测定脂肪酸的组成。2、用聚丙烯酰胺凝胶电泳研究同功酶。3、建立了自旋捕捉方法分析超氧岐化酶的活性。我们对二十四种大豆进行了研究：虎林野生大豆、公主岭野生大豆、秣食豆、黑豆、金元1号、满仓金、小金黄、东农4号、大白眉、早丰1号、十胜长叶、阿姆索、九农9号、黑河3号、绥农4号、黑农26号、吉林3号、合丰23号、哈76-6296、辽宁3号、吉林20、铁丰18、长农4号和EVANS、结果表明大豆种子SOD的比活力和其油脂含量呈极显著负相关；和亚麻酸含量呈极显著正相关；和油酸含量呈极显著负相关；和棕榈酸含量呈显著正相关；和亚油酸含量基本无关；和不饱和脂肪酸和为负相关。其直线回归方程分别为：Yoil = 27.72270-193.04800X比活力 Y18:3 = 3.64289 + 86.69367X比活力 Y18:1 = 31.42366 - 206.61395X比活力 Y16:0 = 9.03986 + 73.46336X比活力 只考虑栽培大豆，它们均未达到5％的显著水平。同功酶的研究结果表明，同功酶可分三个谱带区：A、B和C区，A区为MN-SOO、B、C区均为Cu、Zn-SOD。其中：虎林野生大豆、公主岭野生大豆，秣食豆、黑豆均有两条Mn-SOD同功酶谱带，其余二十个品种栽培大豆均有一条。吉林3号、吉林20的B区只有一条Cu、Zn-SOD同功酶谱带，其余二十二种大豆均有三条。C区都为三条Cu、Zn-SOD同功酶谱带。A、B和C区的百分量和大豆含油量、脂肪酸进行相关分析。结果表明，只有栽培大豆的A区和亚麻含量为显著负相关，其它均没达到5％的显著水平。其直线回归方程为：YA = 43.3277 - 2.5481 X18:3对用HPLC分离脂肪酸的文献方法进行了改进，由文献的1小时改进到每个样品十八分钟。并对二十四种大豆的脂肪酸组成进行了分离测定，结果发现，野生大豆、半栽培大豆和黑豆的亚麻酸含量高于栽培大豆。对光照核黄素体系，DMPO捕捉O_2:的机理进行了探讨。通过SOD抑制O_2~-的DMPO捕捉加合物DMPO－OOH的生成，建立了用自旋捕捉方法分析SOD的活性，并对二十四种大豆种子SOD的活性进行了分析，结果发现，野生大豆，半栽培大豆和黑豆的SOD比活力偏高。

STRUCTURAL DEFECTS AND THEIR ELECTRICAL-ACTIVITY IN GERMANIUM IMPLANTED SILICON

The electrical and structural characteristics of secondary defects in regrown amorphous layers formed in n-type Si(100) with a resistivity of 2 OMEGA cm and 6 OMEGA cm using Ge+ ions, has been studied. The amorphous layers with a thickness of 460 nm are formed by implantation of 1 x 10(15) Ge+ cm-2 at an energy of 400 keV. Both conventional furnace and rapid thermal annealing were used to regrow the amorphous layer and the residual defects have been characterised in terms of their concentration depth distribution and activation energies using C-V and DLTS. Structural information has been obtained from RBS and XTEM. By choosing suitable anneal conditions it is possible to eliminate extended defects, apart from a low concentration of end of range dislocation loops. However, a substantial population of electrically active point defects remain after simple low thermal budget anneals. In a sample implanted with 1 x 10(15) Ge+ cm-2 at 400 keV a region of deep donors approximately 460 nm from the surface is always present When the samples are annealed at higher temperatures (> 850-degrees the total deep donor concentration is reduced by one order of magnitude. Other electrically active defects not observable in the low (750-degrees-C) temperature annealed layers become apparent during anneals at intermediate temperatures.

中国管口苔属（Solenostoma Mitt.）植物研究

本文是对中国管口苔属（Solenostoma Mitt.）植物种类的初步整理和研究。共记载3亚属、44种及1变种，其中有24个新组合，如下：Solenostoma (L.) subulatum (Evans) Wang, S. (L.) atrovirens (Schleich) Wang, S. (L.) grossitextum (Steph.) Wang, S. (S.) fusiformis (Steph.) Wang, S. (S.) lanigerum (Mitt.) Wang, S. (S.) pseudocyclops (Inoue) Wang, S. (S.) subrubrum (Steph.) Wang, S. (S.) pyriflorum var.minutissimum (Amak.) Wang, S. (S.) sinensis (Nich.) Wang, S. (S.) faurianum (Beauvd) Wang, S. (S.) cyclops (HAtt.) Wang, S. (S.) apressifolium (Mitt.) Wang, S. (S.) schaulianum (Steph.) Wang, S. (P.) Japonicum (Amak.) Wang, S. (P.) tetragonum (Lindb.) Wang, S. (P.) rosulans (Steph.) Wang, S. (P.) thermarum (Steph.) Wang, S. (P.) hattorianum (Amak.) Wang, S. (P.) rupicolum (Amak.) Wang, S. (P.) rubripunctatum (Hatt.) Wang, S. (P.) hasskarlianum (Nees) Wang, S. (P.) setulosum (Herzog) Wang, S. (P.) truncatum (Nees) Wang, S. (P.) tsukushiensis (Amak.) Wang, 其中有14种及1变种为中国分布新纪录，如下：Solenostoma (L.) grossitextum (Steph.) Wang, S. (S.) fusiformis (Steph.) Wang, S. (S.) faurianum (Beauvd.) Wang, S. (S.) cyclops (Hatt.) Wang, S. (S.) pusillum (Jens) Steph., S. (S.) pyriflorum var. minutissimum (Amak.) Wang, S. (P.) rubripunctatum (Hatt.) Wang, S. (P.) thermarum (Steph.) Wang, S. (P.) rosulans (Steph.) Wang, S. (P.) hyalinum (Lyell) Mitt., S. (P.) radicellosum Mitt, S. (P.) Japonicum (Amak.) Wang, S. (P.) tsukushiensis (Amak.) Wang, S. (P.) hatterianum (Amak.) Wang, S. (P.) rupicolum (Amak.) Wang, 其中还有6种中国特有种，如下：Solenostoma (L.) subulatum (Evans) Wang, S. (P.) flagellalioides Gao, S. (P.) microphyllum Gao, S. (P.) orbicularifolium Gao, S. (P.) setulosum (Herzog) Wang, S. (S.) sinensis (Nich.) Wang。本文还对管口苔属（Solenostoma Mitt.）的研究历史作了回顾。对中国管口苔属各分类群的鉴别特征、产地和地理分布作了叙述，对区系成份做了分析。并对前人工作中的某些问题进行了讨论，提出了自己的看法。

First principles based predictions of the toughness of a metal/oxide interface

We describe a first-principles-based strategy to predict the macroscopic toughness of a gamma-Ni(Al)/alpha-Al2O3 interface. Density functional theory calculations are used to ascertain energy changes upon displacing the two materials adjacent to the interface, with relaxation conducted over all atoms located within adjoining rows. Traction/displacernent curves are obtained from derivatives of the energy. Calculations are performed in mode I (opening), mode II (shear) and at a phase angle of 45 degrees. The shear calculations are conducted for displacements along < 110 > and < 112 > of the Ni lattice. A generalized interface potential function is used to characterize the results. Initial fitting to both the shear and normal stress results is required to calibrate the unknowns. Thereafter, consistency is established by using the potential to predict other traction quantities. The potential is incorporated as a traction/displacement function within a cohesive zone model and used to predict the steady-state toughness of the interface. For this purpose, the plasticity of the Ni alloy must be known, including the plasticity length scale. Measurements obtained for a gamma-Ni superalloy are used and the toughness predicted over the full range of mode mixity. Additional results for a range of alloys are used to demonstrate the influences of yield strength and length scale.