计算固体力学方法

本书介绍当前在计算固体和结构力学中广泛研究和应用的四种计算方法：有限元法、加权余量法、边界元法和无网络法，并系统论述了这四种方法的理论基础和相应的离散方法。

带压电陶瓷片梁的力学分析和二类变量广义变分原理

对于采用贴有压电陶瓷片作为作动元件的智能结构，在进行自适应控制时，往往要分析压电陶瓷片所引起的结构中的应力、应变和位移。对于带有压电陶瓷片梁的力学分析，文献中大多采用Euler-Bernoulli模型，即不考虑梁中的剪力，且假定梁沿厚度方向满足直法线假定。考虑到压电陶瓷片对梁的作用主要是通过粘贴层以剪力的形式传递到梁上，梁截面上的剪应力和剪应变一般很大，其影响不能忽略。本文采用Hellinger-Reissner二类变分广义余能原理，导出考虑梁截面上剪应力和剪应变影响的方程式，其中采用吉尔法求解非齐次常微分方程组。并将求得的解与相同条件的有限元解进行比较。结果证明该方法很有效。本文还对二类广义变分法进行了一般的讨论，发现，在使用二类广义变分法求解时，随着应力和位移所取项数的增加，结果有时反而变坏。并对二类广义变分法的使用提出了一些建议。

Simulations to design an online motion compensation system for scanned particle beams

Respiration-induced target motion is a major problem in intensity-modulated radiation therapy. Beam segments are delivered serially to form the total dose distribution. In the presence of motion, the spatial relation between dose deposition from different segments will be lost. Usually, this results in over-and underdosage. Besides such interplay effects between target motion and dynamic beam delivery as known from photon therapy, changes in internal density have an impact on delivered dose for intensity-modulated charged particle therapy. In this study, we have analysed interplay effects between raster scanned carbon ion beams and target motion. Furthermore, the potential of an online motion strategy was assessed in several simulations. An extended version of the clinical treatment planning software was used to calculate dose distributions to moving targets with and without motion compensation. For motion compensation, each individual ion pencil beam tracked the planned target position in the lateral aswell as longitudinal direction. Target translations and rotations, including changes in internal density, were simulated. Target motion simulating breathing resulted in severe degradation of delivered dose distributions. For example, for motion amplitudes of +/- 15 mm, only 47% of the target volume received 80% of the planned dose. Unpredictability of resulting dose distributions was demonstrated by varying motion parameters. On the other hand, motion compensation allowed for dose distributions for moving targets comparable to those for static targets. Even limited compensation precision (standard deviation similar to 2 mm), introduced to simulate possible limitations of real-time target tracking, resulted in less than 3% loss in dose homogeneity.