Forebody Compressibility Research of Hypersonic Vehicle

Three kinds of forebody model of hypersonic vehicles were studied with numerical simulation method. It shows that the two- order compressive ramp model is the best selection among the three for its good evaluative parameters value at the cowl of the inlet . This model can provide higher value of flux coefficient and total pressure recovery coefficient and lower average Mach number compared with those of the other two models . Simultaneously different compressive angles may have different effects . The configuration which the firstorder of compressive angle is 4°and the second 5°is the optimum combination. Furthermore factors such as attack angle were concerned. Better result may be obtained with a range of attack angles . Based on the work above the integrated design for forebodyPinlet of a hypersonic vehicle was performed. The numerical result shows that this integrated model provides good flow field quality for inlet and engine work.

Characteristics of Micronozzle Gas Flows

The fluid characteristics of gas flows in the micronozzle whose throat height is 20 μm were investigated by the direct simulation Monte Carlo (DSMC) method. In a series of cases, the dependence of mass flux on the pressure difference was gained, and the DSMC's results show good agreement with the experimental data. The comparison of mass flux and the Mach number contours between the DSMC and Navier-Stokes equations adding slip boundary also reveals quantitatively that the continuum model will be invalid gradually even when the average Knudsen number is smaller than 0.01. As one focus of the present paper, the phenomenon of the multiple expansion-compression waves that comes from the nozzle's divergent part was analyzed in detailed.

Numerical Study Of Heat Transfer Mechanism In Turbulent Supercritical Co2 Channel Flow

Direct numerical simulation (DNS) of supercritical CO2 turbulent channel flow has been performed to investigate the heat transfer mechanism of supercritical fluid. In the present DNS, full compressible Navier-Stokes equations and Peng-Robison state equation are solved. Due to effects of the mean density variation in the wall normal direction, mean velocity in the cooling region becomes high compared with that in the heating region. The mean width between high-and low-speed streaks near the wall decreases in the cooling region, which means that turbulence in the cooling region is enhanced and lots of fine scale eddies are created due to the local high Reynolds number effects. From the turbulent kinetic energy budget, it is found that compressibility effects related with pressure fluctuation and dilatation of velocity fluctuation can be ignored even for supercritical condition. However, the effect of density fluctuation on turbulent kinetic energy cannot be ignored. In the cooling region, low kinematic viscosity and high thermal conductivity in the low speed streaks modify fine scale structure and turbulent transport of temperature, which results in high Nusselt number in the cooling condition of the supercritical CO2.

Information Preservation Modeling of Rayleigh-Benard Transition from Thermal Conduction to Convection

Onset and evolution of the Rayleigh-Benard (R-B) convection are investigated using the Information Preservation (IP) method. The information velocity and temperature are updated using the Octant Flux Splitting (OFS) model developed by Masters & Ye based on the Maxwell transport equation suggested by Sun & Boyd. Statistical noise inherent in particle approaches such as the direct simulation Monte Carlo (DSMC) method is effectively reduced by the IP method, and therefore the evolutions from an initial quiescent fluid to a final steady state are shown clearly. An interesting phenomenon is observed: when the Rayleigh number (Ra) exceeds its critical value, there exists an obvious incubation stage. During the incubation stage, the vortex structure clearly appears and evolves, whereas the Nusselt number (Nu) of the lower plate is close to unity. After the incubation stage, the vortex velocity and Nu rapidly increase, and the flow field quickly reaches a steady, convective state. A relation of Nu to Ra given by IP agrees with those given by DSMC, the classical theory and experimental data.

Numerical Study of Heat Transfer Mechanism in Turbulent Supercritical CO2 Channel Flow

Direct numerical simulation (DNS) of supercritical CO2 turbulent channel flow has been performed to investigate the heat transfer mechanism of supercritical fluid. In the present DNS, full compressible Navier-Stokes equations and Peng-Robison state equation are solved. Due to effects of the mean density variation in the wall normal direction, mean velocity in the cooling region becomes high compared with that in the heating region. The mean width between high-and low-speed streaks near the wall decreases in the cooling region, which means that turbulence in the cooling region is enhanced and lots of fine scale eddies are created due to the local high Reynolds number effects. From the turbulent kinetic energy budget, it is found that compressibility effects related with pressure fluctuation and dilatation of velocity fluctuation can be ignored even for supercritical condition. However, the effect of density fluctuation on turbulent kinetic energy cannot be ignored. In the cooling region, low kinematic viscosity and high thermal conductivity in the low speed streaks modify fine scale structure and turbulent transport of temperature, which results in high Nusselt number in the cooling condition of the supercritical CO2.

Sequencing, annotation and comparative analysis of nine BACs of giant panda (Ailuropoda melanoleuca)

A 10-fold BAC library for giant panda was constructed and nine BACs were selected to generate finish sequences. These BACs could be used as a validation resource for the de novo assembly accuracy of the whole genome shotgun sequencing reads of giant panda newly generated by the Illumina GA sequencing technology. Complete sanger sequencing, assembly, annotation and comparative analysis were carried out on the selected BACs of a joint length 878 kb. Homologue search and de novo prediction methods were used to annotate genes and repeats. Twelve protein coding genes were predicted, seven of which could be functionally annotated. The seven genes have an average gene size of about 41 kb, an average coding size of about 1.2 kb and an average exon number of 6 per gene. Besides, seven tRNA genes were found. About 27 percent of the BAC sequence is composed of repeats. A phylogenetic tree was constructed using neighbor-join algorithm across five species, including giant panda, human, dog, cat and mouse, which reconfirms dog as the most related species to giant panda. Our results provide detailed sequence and structure information for new genes and repeats of giant panda, which will be helpful for further studies on the giant panda.

Microsatellites assessment of Chinese sturgeon (Acipenser sinensis Gray) genetic variability

Four microsatellites were used to examine the genetic variability of the spawning stocks of Chinese sturgeon, Acipenser sinensis, from the Yangtze River sampled over a 3-year period (1999-2001). Within 60 individuals, a total of 28 alleles were detected over four polymorphic microsatellite loci. The number of alleles per locus ranged from 4 to 15, with an average allele number of 7. The number of genotypes per locus ranged from 6 to 41. The genetic diversity of four microsatellite loci varied from 0.34 to 0.67, with an average value of 0.54. For the four microsatellite loci, the deviation from the Hardy-Weinberg equilibrium was mainly due to null alleles. The mean number of alleles per locus and the mean heterozygosity were lower than the average values known for anadromous fishes. Fish were clustered according to their microsatellite characteristics using an unsupervised 'Artificial Neural Networks' method entitled 'Self-organizing Map'. The results revealed no significant genetic differentiation considering genetic distance among samples collected during different years. Lack of heterogeneity among different annual groups of spawning stocks was explained by the complex age structure (from 8 to 27 years for males and 12 to 35 years for females) of Chinese sturgeon, leading to formulate an hypothesis about the maintenance of genetic diversity and stability in long-lived animals.

Manipulation of host density affects infestation of a peritrich ciliate (Epistylis lacustris) on a calanoid copepod (Leptodiaptomus minutus) in Crystal Lake, Wisconsin, USA

Specimens of the calanoid copepod, Leptodiaptomus minutus, collected in June 1994 in oligotrophic: north temperate Crystal Lake, were infested with the stalked ciliate Epistylis lacustris. E. lacustris was highly specific to L. minutus and no other coexisting zooplankters were infested. Excluding nauplii, nearly 70% of copepods carried 1-20 ciliates, although the maximum load was as high as 250 ciliates. A lower percentage of nauplii were infested by the ciliate; those that were infested had a lower ciliate load than other copepod stages. Infestation by ciliates had no significant influence on the average egg number of female copepods. In a field experiment, higher copepod densities in enclosures resulted in a significantly higher infestation rate, but the ciliate load per individual copepod did not differ significantly among treatments.

Spectral properties of a double-quantum-dot structure: A causal Green's function approach

Spectral properties of a double quantum dot (QD) structure are studied by a causal Green's function (GF) approach. The double QD system is modeled by an Anderson-type Hamiltonian in which both the intra- and interdot Coulomb interactions are taken into account. The GF's are derived by an equation-of-motion method and the real-space renormalization-group technique. The numerical results show that the average occupation number of electrons in the QD exhibits staircase features and the local density of states depends appreciably on the electron occupation of the dot.

Experimental investigation on TBAB clathrate hydrate slurry flows in a horizontal tube: Forced convective heat transfer behaviors

Tetra-n-butyl-ammonium bromide (TBAB) clathrate hydrate slurry (CHS) is one kind of secondary refrigerants, which is promising to be applied into air-conditioning or latent-heat transportation systems as a thermal storage or cold carrying medium for energy saving. It is a solid-liquid two phase mixture which is easy to produce and has high latent heat and good fluidity. In this paper, the heat transfer characteristics of TBAB slurry were investigated in a horizontal stainless steel tube under different solid mass fractions and flow velocities with constant heat flux. One velocity region of weakened heat transfer was found. Moreover, TBAB CHS was treated as a kind of Bingham fluids, and the influences of the solid particles, flow velocity and types of flow on the forced convective heat transfer coefficients of TBAB CHS were investigated. At last, criterial correlations of Nusselt number for laminar and turbulent flows in the form of power function were summarized, and the error with experimental results was within 20%.

Effect of valence of copper in La2-xThxCuO4 on NO decomposition reaction

NO decomposition reaction was investigated over La2-xThxCuO4, in which the valence of copper was controlled by Th substitution and was characterized by XPS measurement. A close correlation between the valence of copper and the activity was observed. The activity increased with the decrease of the average oxidation number of copper, and increased with the increase of Cu+ content, suggesting that the transition metal with low valence (Cu+) is active for the reaction in the present cases.

通过对心理学期刊的几项统计分析看我国十年来儿童发展教育心理学研究状况与动向

In this study, bibliometric method was usded in the investigation of 2274 papers concerning child developmental and educational psychology, which were published during the ten years of 1979-1988, in 14 psychological journals and 97 other scientific journals. According to the quantitative and qualitative analyses, the results are as follows: 1979-1988 saw the rapid development and prosperous period in China's child developmental and educational psychology, During which more papers were published and more fields couched than in the psvious thirty years. The number of literature publications increased and went to the peak in 1983 and 1984, and came down since 1985. The trend was found to result from the decrease in popular science introductions of psychology, which reflected that a heat of psychology had appeared in 1983 and started to cool in 1985. At the mean time, the number of research reports had been holding a steady increase by 1987 and decreased obviously in 1988, especially in the fields of cognitive and social development. There could be several possible explanations of this phenonemon: Piagetian studies are becoming fewer and the eakening of Piaget's influence might predict a period of standstill in the field of developmental psychology in China; As researches become more and more difficult, researchers have turned to be more cautious in lay out their reports; the cutdown of fees and staff could also be one of reasons for less publication in 1988. As the factors mentioned above still exist and their influences last, the number of papers are not expected to increase in the near future. The field of thinking and menory is closely connected with that of artificial intelligence. The downhill situations in these two fileds should be taken seriously. 2. The types of research work are divided on the bases of their problem raising. The trends show that the deepening studies, which represent a comaratively higher level of exploration, are waving fewer, while repeated studies and creative studies are becoming more as the years go along. This fact is worth being further analysed. Big progress could be seen from research methods. The methods currently used are mainly experiment, psychological measurement and assessment, and theoretical reasoning. There is a rapid increase of research by using scales. Wechsler Intelligence Scale for Children, Binet Scale and Baley Scale have been revised andstandardized. Chinese researchers have also developed several good scales of their own, some of which are valuable and need to be standardized. In the papers investigated, the amount of citation is significantly lower than the world average level as well as the average citation number of whole China's scientific literature. Among the papers cited, most are of Chinese and English languages, and only a small rate were published in resently five years. The renewal of literature cited seems to stay at a low level in the ten years. Tremendous work could be reflected by the number of subjects used the research work in those ten years: 362665. A lot of studies piled on the period of 4-16 year olds. Compared with the previous thirty years, the age range was much enlarged and there were quite a few studies about preschool, school and adolescent periods. The study of newborn of 0-3 has been a weak point so far and it is a field to which chinese developmental psychologists should pay more attention. The progress in using statistics is one of the most obvious part in the development in the research work of child developmental and educational psychology. The one tendency that should be awared and avoid is to put the cart before the horse: seeking for more sophisticated statistic method while neglecting the meanings of research problems. 3. Citation analysis was used in selecting scholars who had great influence in the field of child developmental and educational psychology. Among the often cited and famous scholars, 31 are Chinese researchers and 12 are Western psychologists. The authoritative journal for child developmental psychology and educational psychology is Acta Psychologica Sinica.

Fully developed laminar flow and heat transfer in smooth trapezoidal microchannel

Numerical analysis of fully developed laminar slip flow and heat transfer in trapezoidal micro-channels has been studied with uniform wall heat flux boundary conditions. Through coordinate transformation, the governing equations are transformed from physical plane to computational domain, and the resulting equations are solved by a finite-difference scheme. The influences of velocity slip and temperature jump on friction coefficient and Nusselt number are investigated in detail. The calculation also shows that the aspect ratio and base angle have significant effect on flow and heat transfer in trapezoidal micro-channel. (c) 2005 Elsevier Ltd. All rights reserved.

What has brought on the effects of number-average molecular weight on the spinodals in polymer mixtures?

On the basis of the thermodynamics of Gibbs, the spinodal for the quasibinary system was derived in the framework of the Sanchez-Lacombe lattice fluid theory. All of the spinodals were calculated based on a model polydisperse polymer mixture, where each polymer contains three different molecular weight subcomponents. According to our calculations, the spinodal depends on both weight-average ((M) over bar (w)) and number-average ((M) over bar (n)) molecular weights, whereas that of the z-average molecular weight is invisible. Moreover, the extreme of the spinodal decreases when the polydispersity index (eta = (M) over bar (w)/(M) over bar (n)) of the polymer increases. The effect of polydispersity on the spinodal decreases when the molecular weight gets larger and can be negligible at a certain large molecular weight. It is well-known that the influence of polydispersity on the phase equilibrium (coexisting curve, cloud point curves) is much more pronounced than on the spinodal. The effect of M, on the spinodal is discussed as it results from the infuluence of composition temperatures, molecular weight, and the latter's distribution on free volume. An approximate expression, which is in the assumptions of v* v(1)* = v(2)* and 1/r --> 0 for both of the polymers, was also derived for simplification. It can be used in high molecular weight, although it failed to make visible the effect of number-average molecular weight on the spinodal.

A general theory on media with randomly distributed inclusions .1. The average field behaviors

In this paper, a theory is developed to calculate the average strain field in the materials with randomly distributed inclusions. Many previous researches investigating the average field behaviors were based upon Mori and Tanaka's idea. Since they were restricted to studying those materials with uniform distributions of inclusions they did not need detailed statistical information of random microstructures, and could use the volume average to replace the ensemble average. To study more general materials with randomly distributed inclusions, the number density function is introduced in formulating the average field equation in this research. Both uniform and nonuniform distributions of inclusions are taken into account in detail.