态度结构一致性对态度-行为关系的影响：个体与群体水平的研究

Social psychologists have long been interested in understanding the conditions under which attitudes influence behaviors, and they have formed two relatively independent theoretical perspectives in the attitude-behavior domain. One perspective, which we adopt in the present paper, focuses on investigating the effect of attitude strength on the attitude-behavior relationship. Specifically, the present research investigates the role of structural consistency, a dimension of attitude strength, on the attitude-behavior relationship. Structural consistency has typically been defined as the extent to which one aspect of individual’s attitude is consistent with either his or her overall attitude toward the object or the other aspect of the attitude, including affective-cognitive consistency (ACC), evaluative-cognitive consistency (ECC) and evaluative-affective consistency (EAC). The ECC and EAC can be integrated into the attitude base. Despite the evidence that structural consistency is associated with attitude-behavior relationship, there are some limitations in previous studies: (1) attitude base and ACC have been rarely studied together ;( 2) researchers often used the term behavior in a broad sense to encompass behavioral intentions as well as actual behaviors ;( 3) the effects were all investigated at individual level. The present research tried to explore the effects of ACC and attitude base on attitude-behavioral intention-actual behavior relationships at individual and group levels in different behavior areas including shopping, supportive behavior towards officials, and offensive behavior towards governors and central and local governments. The roles of affective and cognitive components of attitudes on general attitudes and following behaviors were also examined in this research. The results indicated that: A. At individual and group levels, the effect of structural consistency on attitude –intention relation is as the same as its effect on attitude-behavior relation, but it varies in different areas. On the other hand, the effect of structural consistency on explicit attitude-behavior relation is different from its effect on implicit attitude-behavior relation. B. The cognitive components of the individuals and groups’ implicit attitudes towards officials, the implicit and explicit attitudes towards governors, and the public’s attitudes towards central and local governments exert the stronger influence on general attitudes. Similarly, the cognitive components also exert the stronger influence on groups’ supportive behaviors towards officials and offensive behaviors towards governors and governments. C. Both group attitude and emotion can influence the group offensive behavior towards governors. The group attitude exerts its influence through the mediating effects of behavior intention and group emotion. The group emotion which is the core factor can exert the direct influence on group offensive behavior towards governors. D. At individual and group levels, the implicit and explicit measures should be used together to collect the attitude data, because the implicit and explicit attitudes can both predict behaviors under most conditions. It is the best implicit attitude measure to use the experts’ evaluations of listed words. And the emotion should be measured by the experts’ evaluations of listed words if the emotion data is used to predict the following behavior.

学习不良少年的污名效应研究

Stigma is defined as a sign of disgrace or discredit that sets a person apart from others. Stigmatized individuals had been significantly influenced by their group-based stigma. Through the methods of laboratory experiment and questionnaire surveys, the current study started with examining the attitudes of middle school students to the students with learning disabilities (LD), systemly explored the characteristics of perceived stigma and self-stigma of LD students, the mechanism that the influences of stigma on students with LD, and the mental control required to cope with the stigma. The results of the present studies had significant implications for the understanding of the LD phenomenon and the intervention of LD adolescents. The results indicate that: 1. Generally, middle school students had negative implicit attitude and negative explicit attitudes towards the LD students. The effect size of the phenomenon of this study is large. The LD students showed a more positive attitude than others on the explicit attitude measure; all students consistently had negative attitudes toward LD students on the implicit attitude indices, in addition, no group differences and gender differences were observed in the implicit attitude. 2. Eight hundred and seventy two students were surveyed to test the reliability and validity of the new developed perceived stigma scale and self-stigma scale. Both questionnaires showed sufficient content validity, construct validity, criterion-related validity and adequate internal consistency reliability. Then, both questionnaires were administered to student with high academic achievement (high achiever), students with middle academic achievement (middle achiever), and LD students. Results revealed that the LD students mildly stigmatized by the social culture. The LD students had more stigma perception and self-stigma than the middle achievers and high achievers. The results also indicated that there were more stigma perception and self-stigma for LD students in grade two than that of LD students in grade one and grade three; meanwhile, male LDstudent hade more stigma perception and self-stigma than female LD students in all grades. 3. A latent variable path analysis was conducted to investigate how the stigma affect the academic goals using the data collected from 186 LD students. The results suggested that the LD-related stigma did not have direct influence on academic goals. The LD-related stigma indirectly influenced the academic goals through mediating effects of self-stigma and academic efficacy. 4. Stereotype threat could have some influences on the relationship between the task feedback and self-esteem. The results of study using eighty-four LD students showed that: when the negative stereotype was not primed, the self-esteem of the LD students was significantly influenced by the feedback of the task: an enhance self-esteem following a positive feedback and a lower self-esteem following a negative feedback. When the negative stereotype was primed, there was no significantly difference between the positive feedback group and negative feedback group. All the results showed that priming the negative stereotype could weaken the influence of feedback to the self-esteem of LD students. 5. There was more cognitive and behavioral control when LD students tried to cope with the stigma by concealing negative academic achievement during an individual interview with an unfamilar expert. The LD students whose academic achievements could be concealed had more thought suppression and thought intrusion and reported more self-monitoring behavior than the participants in the other experimental conditions.

A Review of Studies on the Mechanical Behavior of Microcellular Plastics

对微孔泡沫塑料力学行为的研究文献进行了综述,简单介绍了微孔泡沫塑料的制备和表征方法,重点介绍了微孔泡沫塑料力学性能的研究工作,其中也包括作者近期在该领域的一些工作。这些工作主要讨论了微孔泡沫塑料的压缩、拉伸、冲击、疲劳和黏弹性效应。最后：给出了对该领域工作的一些讨论和展望。

Size-dependent inelastic behavior of particle-reinforced metal-matrix composites

The strengthening behavior of particle-reinforced metal-matrix composites (MMCp) is primarily attributed to the dislocation strengthening effect and the load-transfer effect. To account for these two effects in a unified way, a new hybrid approach is developed in this paper by incorporating the geometrically necessary dislocation strengthening effect into the incremental micromechanical scheme. By making use of this hybrid approach, the particle-size-dependent inelastic deformation behavior of MMCp is given. Some comparisons with the available experimental results demonstrate that the present approach is satisfactory.

Effects of Microstructural Heterogeneity on the Spallation Behavior of Materials

It is of utmost importance to understand the spallation behaviour of heterogeneous materials. In this paper, a driven nonlinear threshold model with stress fluctuation is presented to study the effects of microstructural heterogeneity on continuum damage evolution. The spallation behavior of heterogeneity material is analyzed with this model. The heterogeniety of mesoscopic units is characterized in terms of Weibull modulus m of strength distibution and stress fluctuation parameter k. At high stress, the maximum damage increases with m; while at low stress, the maximum damage decreases. In addition, for low stress, severe stress fluctuation causes higher damage; while for high stress, causes lower damage.

Indentation Creep Behavior in Ce-Based Bulk Metallic Glasses at Room Temperature

The room temperature creep behaviors of Ce-based bulk metallic glasses were examined by the use of nanoindentation. The creep rate and creep rate sensitivity of Ce-based BMGs were derived from indentation creep curves. The low creep rate sensitivity of Ce-based BMGs indicates that the room temperature creep is dominated by localized shear flow. The experimental creep curves can be described by a generalized Kelvin model. Furthermore, the creep retardation spectrum is calculated for the Ce-based metallic glasses. The results showed that creep retardation spectrum consists of two relatively separated peaks with the well defined characteristic relaxation times.

Dynamic behavior of a cylindrical crack in a functionally graded interlayer under torsional loading

In this paper the problem of a cylindrical crack located in a functionally graded material (FGM) interlayer between two coaxial elastic dissimilar homogeneous cylinders and subjected to a torsional impact loading is considered. The shear modulus and the mass density of the FGM interlayer are assumed to vary continuously between those of the two coaxial cylinders. This mixed boundary value problem is first reduced to a singular integral equation with a Cauchy type kernel in the Laplace domain by applying Laplace and Fourier integral transforms. The singular integral equation is then solved numerically and the dynamic stress intensity factor (DSIF) is also obtained by a numerical Laplace inversion technique. The DSIF is found to rise rapidly to a peak and then reduce and tend to the static value almost without oscillation. The influences of the crack location, the FGM interlayer thickness and the relative magnitudes of the adjoining material properties are examined. It is found among others that, by increasing the FGM gradient, the DSIF can be greatly reduced.

Formation, Thermal Stability and Deformation Behavior of Graphite-Flakes Reinforced Cu-based Bulk Metallic Glass Matrix Composites

Graphite-flake reinforced Cu47Ti34Zr11 Ni-8 bulk metallic glass matrix composite was fabricated by water-cooled copper mould cast. Most of the graphite flakes still keep unreacted and distribute uniformly in the amorphous matrix except that some reactive wetting occurs by the formation of TiC particles around the flakes. It reveals that the presence of graphite flakes does not affect the onset of the glass transition temperature, crystallization reaction and liquidus of the metallic glass. The resulting material shows obvious serrated flow and higher fracture strength under room temperature compressive load, comparing with the monolithic bulk metallic glass (BMG). Three types of interaction between the shear bands and graphite flakes, namely, shear band termination, shear bands branching and new shear bands formation near the graphite flakes can be observed by quasi-static uniaxial compression test and bonded interface technique through Vickers indentation.

3D Anisotropic Elastoplastic-Damage Model and its Application in Simulating the Behavior of Rock Materials

A 3D anisotropic elastoplastic-damage model was presented based on continuum damage mechanics theory. In this model, the tensor decomposition technique is employed. Combined with the plastic yield rule and damage evolution, the stress tensor in incremental format is obtained. The derivate eigenmodes in the proposed model are assumed to be related with the uniaxial behavior of the rock material. Each eigenmode has a corresponding damage variable due to the fact that damage is a function of the magnitude of the eigenstrain. Within an eigenmodes, different damage evolution can be used for tensile and compressive loadings. This model was also developed into finite element code in explicit format, and the code was integrated into the well-known computational environment ABAQUS using the ABAQUS/Explicit Solver. Numerical simulation of an uniaxial compressive test for a rock sample is used to examine the performance of the proposed model, and the progressive failure process of the rock sample is unveiled.

Strain Gradient Effects on Deformation Strengthening Behavior of Particle Reinforced Metal Matrix Composites

Dislocation models with considering the mismatch of elastic modulus between matrix and reinforcing particles are used to determine the effective strain gradient \ita for particle reinforced metal matrix composites (MMCp) in the present research. Based on Taylor relation and the kinetics of dislocation multiplication, glide and annihilation, a strain gradient dependent constitutive equation is developed. By using this strain gradient-dependent constitutive equation, size-dependent deformation strengthening behavior is characterized. The results demonstrate that the smaller the particle size, the more excellent in the reinforcing effect. Some comparisons with the available experimental results demonstrate that the present approach is satisfactory.

PMMA with Long-Persistent Phosphors and Its Behavior of Luminescence

A new kind of rare earth material with high efficient long-persistent phosphors, such as SrAl2O4: Eu, Dy, has been developed in recent years. The PMMA with long-persistent phosphors is typical one of applications for the phosphors. In this work, we try to probe into the affection of the manufacture process on the PMMA with long-persistent phosphors, to analyze its performance, and its luminescence behavior, especially to study the self-excitation of the PMMA with long-persistent phosphors.

Plastic constitutive behavior of short-fiber/particle reinforced composites

A cylindrical cell model based on continuum theory for plastic constitutive behavior of short-fiber/particle reinforced composites is proposed. The composite is idealized as uniformly distributed periodic arrays of aligned cells, and each cell consists of a cylindrical inclusion surrounded by a plastically deforming matrix. In the analysis, the non-uniform deformation field of the cell is decomposed into the sum of the first order approximate field and the trial additional deformation field. The precise deformation field are determined based on the minimum strain energy principle. Systematic calculation results are presented for the influence of reinforcement volume fraction and shape on the overall mechanical behavior of the composites. The results are in good agreement with the existing finite element analyses and the experimental results. This paper attempts to stimulate the work to get the analytical constitutive relation of short-fiber/particle reinforced composites.

Strain Rate-Dependent Compressive Deformation Behavior of Nd-Based Bulk Metallic Glass

Compressive deformation behavior of the Nd60Fe20Co10Al10 bulk metallic glass was characterized over a wide strain rate range (6.0 x 10(-4) to 1.0x10(3) s(-1)) at room temperature. Fracture stress was found to increase and fracture strain decrease with increasing applied strain rate. Serrated flow and a large number of shear bands were observed at the quasi-static strain rate (6.0 x 10(-4)s(-1)). The results suggest that the appearance of a large number of shear bands is probably associated with flow serration observed during compression; and both shear banding and flow serration are a strain accommodation and stress relaxation process. At dynamic strain rates (1.0 x 10(3) s(-1)), the rate of shear band nucleation is not sufficient to accommodate the applied strain rate and thus causes an early fracture of the test sample. The fracture behavior of the Nd60Fe20Co10Al10 bulk metallic glass is sensitive to strain rate.

Behavior of Multiple Shear Bands in Zr-Based Bulk Metallic Glass

The deformation behavior of Zr41.2Ti13.8Cu12.5Ni10Be22.5 bulk metallic glass was studied by in situ scanning electron microscopy (SEM) quasi-static uniaxial compression tests at room temperature. Multiple shear bands were observed with a large plasticity. Microscopic examination demonstrates that slipping, branching and intersecting of multiple shear bands are the main mechanisms for enhancing the plasticity of this metallic glass. Additionally, nano/micro-scale voids and cracks at the intersecting sites of shear bands and preferential etching of shear bands were observed as well. These observations demonstrated that the formation of shear bands in bulk metallic glasses is resulted mainly from local free volume coalescence.