Aromatic poly(ester imide)s and poly(amide imide)s having 1,1 '-binaphthyl-2,2 '-diyls in the main chain

Full Paper: Two new 1,1'-binaphthyl-2,2'-diyl-based dianhydrides, i.e., 2,2'-bis(3,4-dicarboxybenzamido)-1,1'-binaphthyl dianhydride (BNDADA) and 2,2'-bis(3,4-dicarboxybenzoyloxy)-1,1'-binaphthyl dianhydride (BNDEDA), were synthesized and polymerized with various aromatic diamines to afford polyimides through the traditional two-step method. The polyimides with inherent viscosities ranging from 0.27 to 0.70 dl . g(-1) showed excellent solubilities in polar solvents such as DMAc, DMSO and NMP etc., except of the poly(ester imide) prepared from BNDEDA and benzidine. Poly(ester imide)s based on BNDEDA can also be readily dissolved in weakly polar solvents such as THF, CH2Cl2 and CHCl3. The glass transition temperatures of these polyimides are in the range of 210-310 degrees C; the 5% weight loss temperatures are in the range of 390-465 degrees C in nitrogen and 384-447 degrees c in air. These polymers from light yellow, tough films that were transparent above 365 nm. The effects of different flexible units attached in the 2- and 2'-positions, i.e., amide, ester and ether, on the properties of the polyimides obtained are discussed.

中旬红山矽卡岩铜矿稳定同位素特征及其对成矿过程的指示

红山铜矿床位于三江地区义敦岛弧南端的中甸弧，是在晚三叠世甘孜-理塘洋盆向西俯冲过程中形成的一个中型规模的矽卡岩矿床。通常，矽卡岩体就是铜矿体或铜矿化体，主要呈似层状、层状、脉状及透镜体状产于大理岩与角岩接触带或局部在角岩中，未见其与侵入岩直接接触。通过对不同成矿阶段所形成的石榴石、磁铁矿、磁黄铁矿、黄铁矿、黄铜矿、方解石等典型矿物以及大理岩的稳定同位素特征研究，发现矽卡岩的最主要组成矿物石榴石的δ^18OSMOW范围为6．2—8．3‰，反映了矽卡岩可能直接继承隐伏斑岩体的氧同位素组成。根据磁铁矿的氧同位素组成（5．5—7．1‰）所计算的磁铁矿化阶段成矿流体的δ^18OSMOW为13．1—14．7‰（400℃）或12．5—14．1％。（500℃），暗示有富集δ^18O的CO2溶入到成矿流体中。硫化物的δ^34SCDT范围4．45—6．20‰，说明矿床具有高度均一的硫源，并且在硫化物的结晶沉淀过程中，流体中硫同位素分馏很弱。由此推测主成矿期成矿流体的δ^34S∑S为5．6±0．6‰。矿床中的大理岩的δ^13CPDB为2．0—2．2‰，δ^18OSMOW为24．0—24．8‰，说明大理岩是由海相碳酸盐岩经重结晶作用而成。成矿晚期阶段形成的方解石脉的δ^13CPDB范围是-2．4—1．7‰，δ^18OSMOW范围是16．3—22．4‰，表明其C和O主要来源于大理岩。总之，我们推测红山矽卡岩很可能主要是由中酸性岩浆浅成侵位时局部同化碳酸盐围岩所形成的一种富含钙质成分的次生岩浆就位于碎屑岩与碳酸盐岩之间的构造薄弱带冷凝固结而成，矽卡岩型矿化与深部斑岩型矿化具有共同的成矿物质和成矿流体来源。

Factors that effect antioxidant activity of C-phycocyanins from Spirulina platensis

Currently, antioxidants are added in the human diet to prevent free radical-induced cell damage, and there has been an explosive interest in the use of antioxidant nutritional supplements. The effects of different factors on the antioxidant activity of phycocyanins (PCs) were studied. The results showed that PCs generated hydroxyl radicals in the light, while scavenging them in the dark. When PCs were denatured by sodium dodecyl sulfate, urea and in alkaline condition, their ability to generate hydroxyl radicals disappeared and that of scavenging them greatly increased. This showed that the phycobilin moiety is the main part of PC involved in scavenging hydroxyl radicals. Trypsin hydrolysis of PCs showed that the apoprotein portion of the molecule also made a significant contribution to the antioxidant activity.

Nonequilibrium microstructures and their evolution in a Fe-Cr-W-Ni-C laser clad coating

The laser-solidified microstructural and compositional characterization and phase evolution during tempering at 963 K were investigated using an analytical transmission electron microscope with energy dispersive X-ray analysis. The cladded alloy, a powder mixture of Fe, Cr, W, Ni, and C with a weight ratio of 10:5:1:1:1, was processed with a 3 kW continuous wave CO2 laser. The processing parameters were 16 mm/s beam scanning speed, 3 mm beam diameter. 2 kW laser power, and 0.3 g/s feed rate. The coating was metallurgically bonded to the substrate, with a maximum thickness of 730 mu m, a microhardness of about 860 Hv and a volumetric dilution ratio of about 6%. Microanalyses revealed that the cladded coating possessed the hypoeutectic microstructure comprising the primary dendritic gamma-austenite and interdendritic eutectic consisted of gamma-austenite and M7C3 carbide. The gamma-austenite was a non-equilibrium phase with extended solid solution of alloying elements and a great deal of defect structures, i.e. a high density of dislocations, twins, and stacking faults existed in gamma phase. During high temperature aging, in situ carbide transformation occurred of M7C3 to M23C6 and M6C. The precipitation of M23C6, MC and M2C carbides from austenite was also observed.

铁基抗高温磨损激光熔覆涂层强韧设计和研究II:Fe-Cr-C-W-Ni激光熔覆层的微观组织及性能

本文以对热工模具进行失效分析的基础上，利用激光熔覆技术，在５ＣｒＭｎＭｏ基础上设计并制备强韧兼备的抗高温磨损涂层。