德国鸢尾快速分株繁殖的研究

本实验用喷施6-BA和茎切生根的方法建立了一套德国鸢尾快速分株繁殖的体系。用3 000 mg/L 或5 000 mg/L 的6-BA 对德国鸢尾（Iris germanica）‘lovely again’进行单次喷施可以促进根茎芽的萌发和根状茎的形成。在喷施后的30 天到90 天内，BA的促进作用在具有2个或4个起始根状茎的植株上表现得很显著，但对于只有一个起始根状茎的植株不显著。在喷施后的150 天以及第二年，具有2个或4个起始根状茎的母株总体上比只具有1个起始根状茎的母株产生了更多的根状茎。而6-BA的喷施对母株的叶面积和叶片数变化没有显著影响。在早春时，把处于不同发育阶段的侧芽或小根茎从母株上取下，并且用不同浓度的IBA处理。总体上，处于较高发育阶段的茎切（芽切）在生根率、初级根和次级根的数目，总根长、根干重以及植株高度等测量指标方面的表现较好。IBA对德国鸢尾的茎切（芽切）的生根作用不显著。多次喷施6-BA 对德国鸢尾根茎芽的生出的促进作用显著，并且使生物量重新分配。连续喷施6-BA后，对内源生长素和细胞分裂素的连续测定结果表明，6-BA的作用主要是解除了顶端优势对侧芽的萌发和生长的抑制，从而形成新的根茎。

中国西部亚热带常绿阔叶林木本植物小枝功能生态学初步研究

常绿阔叶林以其富饶的生物资源、丰富的生物多样性和巨大的生态与环境效益引起了人们越来越大的重视，它的研究已成为国际植被科学界关注的主题之一。我国分布着世界上面积最大的亚热带常绿阔叶林，在世界植被中具有重要地位，它的分布表现出明显的地带性差异，存在着多样的植物群系及其对应的气候特征。但是在植物功能性状领域，与全球范围其它生物群系相比，常绿阔叶林物种的研究较少，其功能性状间、功能性状与环境间的关系尚不清晰。 本研究以常绿阔叶林木本植物的当年生小枝为对象，试图从小枝水平上的生物量分配格局、叶片大小与数量的权衡关系、小枝茎的构型效应、叶片元素化学计量学，以及小枝大小的成本与效益分析等方面，较为系统地揭示小枝水平上的植物功能性状间及其与气候间的关系。因此，在华西雨屏带内部的不同纬度设置峨眉－青城－雷波－平武的温度梯度进行比较，并对有降水差异的川西南偏湿性（雷波）与偏干性常绿阔叶林（西昌）进行对比研究，同时在不同山体进行不同海拔梯度的比较研究。 本文主要研究结果如下： （1）小枝生物量分配格局叶水平上，叶片重－叶柄重（Y轴vs.X轴,下同）呈斜率小于1的异速生长关系，表明叶柄对叶内部的生物量分配影响显著。小枝水平上，叶和茎的生物量以及它们与小枝总生物量间基本呈等速生长关系，表明大的小枝或大叶物种不一定在叶生物量的分配上占优势。不同生活型间，在小枝或者茎的生物量一定时，常绿物种叶片的生物量比例较落叶物种稍高。与温度和水分较优越（峨眉及其低海拔）的生境相比，在相对低湿（螺髻）与低温（平武）的生境中的植物会减少对叶的投入而增加对支撑部分的投资比例。 （2）小枝叶片大小与数量的权衡无论是不同气候带还是不同生活型以及不同海拔梯度，叶片大小与出叶强度基本都是呈负的等速生长关系，表明了叶片大小－数量在小枝水平上的权衡。在不同气候梯度的对比中，叶片数量（出叶强度）一定时，高温和高水分生境（峨眉）比低温（平武）和低湿（螺髻山）生境中的物种的叶片大小（质量和面积）更大，表明不同生境的比较中，小的叶片可能具有较高的出叶强度和更高的适合度收益。“出叶强度优势”（Leafingintensitypremium）假说可能不适宜解释不同生境物种叶片大小差异。 （3）小枝茎的构型效应虽然茎长和茎径与叶片大小都呈正相关关系，与出叶强度都呈负相关关系，但茎长/茎径比与叶/茎生物量之比呈负相关关系；与叶片的大小呈负相关关系，与出叶强度呈正相关关系。这说明小枝构型能影响小枝叶/茎生物量分配和叶大小－数量的权衡关系。其影响机制可能是小枝内部的顶端优势。另外，茎长/茎径比在低湿和低温等不利生境中的植物中较高，而在降水和温度较适宜环境中较低。 （4）叶片C、N、P化学计量学N含量和P含量，C/N比和比叶重（LMA,leafmassperarea）呈正的等速生长关系，而N和LMA，P和LMA呈负的等速生长关系。在LMA一定时，C/N比随着生境胁迫压力的增加而降低，N、P含量随着生境压力的增加而增加。在P含量一定时，N含量随着生境压力的增加而降低，即N/P比在生境条件较优（峨眉及其低海拔）时较高。常绿和落叶植物叶片的N/P比没有差异，在LMA一定时，常绿植物的N、P含量较高、C/N比较低。总之，植物的C、N、P化学计量学特征受叶片属性如LMA与气候，及其相互作用的影响。 （5）小枝大小的代价与效益分析、TLA与小枝总重总叶面积（TLA,totalleafarea，Y轴，下同）与总叶重（X轴）均呈斜率小于1的异速生长关系，TLA与小枝横切面积呈斜率为1的等速生长关系。表明叶片面积的增加总是小于叶重和小枝总重的增加，随着小枝的增大，它的叶面积支撑效率下降。在热量和降水优越的生境（峨眉及其低海拔）中，相同小枝重或者相同茎横切面积的小枝，其叶面积支撑效率较低湿与低温环境下（螺髻山、平武及高海拔）的高。 总体上，本文初步研究了小枝水平上可能存在的以下三种权衡关系：叶－茎生物量分配权衡；叶片大小－数量的权衡；小枝茎长－茎径的权衡关系，以及气候要素等对这三种权衡关系的影响。在此基础上，我们还讨论了这些权衡关系的可能形成机制，及其与物种生态适应的联系。本研究丰富了生活史对策中关于权衡关系的研究内容，为我国常绿阔叶林功能生态学研究积累了材料。 Evergreen broad-leaved forests are attracting much more attention from vegetation ecologists than ever before because of their abundant nature resource and biological diversity, and also great ecological benefits. China has the largest distribution of subtropical evergreen broad-leaved forests (temperate rainforests) that are typical and representative in the world. The forests span over more than ten degrees in latitude and more than 30 degrees in longitude, providing an ideal place to study plant functional ecology, i.e., the climatic effect on plant functional traits and the relationship between the traits. However, relative to the other biomes, there are few studies addressing functional ecology of the plant species from subtropical evergreen broad-leaved forests. In this study, I focused on the leaf size-twig size spectrum of the woody species of subtropical evergreen broad-leaved forests in southwestern china. I collected data on leaf size and number, twig size in terms of both mass and volume, and stem architecture from five temperate mountains, and then I analyzed the relationships between leaf and stem biomass and between leaf size and number, the effect of stem length/diameter ratio on biomass allocation and on the relationship between leaf size and number, leaf C:N:P stoichiometry, and the twig efficiency of supporting leaf area in relation to twig size. I also addressed the climate effect on the spectrum. The temperature gradient from warm to cool sites was represented by Emei Mountain, Qingchengshan, Leibo, and Pingwu, and the rainfall gradient was assumed to emerge from the comparison between Leibo (High) and Luojishan (Low). In addition, altitudinal effects were analyzed with comparisons between low and high altitudes for each mountains. My main results are as follows. Isometric relationships were found between leaf mass and twig mass and between lamina mass and twig mass, suggesting that the biomass allocation to leaves or laminas was independent of twig mass. Petiole mass disproportionably increase with respect to lamina mass and twig mass, indicating the importance of leaf petioles to the within-twig biomass allocation. In addition, the investigated species tended to have a larger leaf and lamina mass, but a smaller stem mass at a given twig mass at favorable environments including warm and humid sites or at low altitude than unfavorable habitats, which might be due to the large requirements in physical support and transporting safety for the species living at unfavorable conditions. Moreover, the evergreen species invested more in leaves and laminas than the deciduous at given stem or twig biomass within any specified habitats. Negative, isometric scaling relationships between leaf number and size broadly existed in the species regardless of climate, altitude, and life forms, suggesting a leaf size/number trade-off within twigs. Along the climatic gradients, at given leaf number or leafing intensity, the leaves were larger in the favorable environments than the poor habitats. This suggested that the fitness benefit gained by small leaves could be larger than that with high leafing intensity in the stressful sites. I concluded that the “leafing intensity premium” hypothesis was not appropriate to interpreting between-habitat variation in leaf size. Both stem length and diameter were positively correlated to leaf size but negatively correlated to leafing intensity. The ratio of stem length to diameter was negatively correlated to leaf mass fraction, and it was negatively correlated to leaf size but positively correlated to leafing intensity. This suggested that the stem architecture influenced twig biomass allocation and the relationship between leaf size and number. The mechanism underlying the architectural effect might lie in the apical dominance within twig. Moreover, the ratio was greater in unfavorable habitats but smaller in favorable environments. Positive, isometric relationships were found between N and P contents per leaf mass, and between C/N ratio and leaf mass per area (LMA), but N and P contents scaled negatively to LMA. C/N ratio decreased but N and P increased with increasing habitat stress at a given LMA. N content declined with increasing habitat stress at given P content. These indicated that N/P and C/N were higher but LMA was lower in favorable habitats than in the other circumstances. The evergreen and deciduous species were non-heterogeneous in N/P, but the evergreen species have higher N and P contents and lower C/N than the deciduous ones. In general, C:N:P stoichiometry were related to both climatic conditions and other important functional traits like LMA. Total leaf area (TLA) allometricly scaled to leaf mass with a slope shallower than 1, similar to the relationship between TLA and total twig mass (leaf mass plus stem mass), suggesting that TLA failed to keep pace with the increase of leaf mass and twig size. However, TLA scaled isometricly to twig cross-sectional area. Thus, it could be inferred that the twig efficiency of displaying leaf area decreased with increasing twig size. In addition, the efficiency at a given twig size was large in favorable than unfavorable habitats. In general, in this preliminary study, I studied three tradeoff relationships within twigs, i.e., between leaf and stem biomass, between leaf number and size, and between stem length and diameter, as well as the climatic effect on the relationships. I discussed the mechanisms underlying the tradeoff relationships in view of biophysics and eco-physiology of plants. I believe that this study can serve as important materials advancing plant functional ecology of subtropical forest and that it will improve the understanding of life history strategies of plants from this particular biome.

Predominant occurrence of apical cell divisions in Oedogoniam pakistanense and its phylogenetic significance

A rare terrestrial species, Oedogonium pakistanense, was first recorded from Hubei Province, south-central China. Morphological characters. including the predominant occurrence of apical cell division and unique lateral apical caps, are described. The growth of the filaments in O. pakistanense from China is usually the result of the repeated divisions of the apical cells and intercalary divisions are rare. It is suggested that this species may represent an evolutionary transition between Oedogonium and Oedocladium, the latter being a terrestrial genus with branched filaments and cell division more often terminal than intercalary.

Microscopic examination of NpNn dominance in the evolution of nuclear structure

The proton-neutron interaction in determining the evolution of nuclear structure has been studied by using the Brillouin-Wigner perturbation expansion. The particle-hole and particle-particle p-n interactions are unifiedly described in the theory. The obtained formulas of level energies and excitation energies scaled in the small- and large-NpNn limits can well explain the linearity of the extracted proton-neutron interaction energies and the attenuation of the 2(1)(+) excitation energies against the valence nucleon product NpNn for five mass regions from A = 100-200.

Stable carbon isotope analyses show dominance of C3 grasses in the feed selected by small herbivores at the alpine meadow at the Tibetan Plateau

Muscle samples were collected from small herbivorous mammals (Ochotona curzoniae, Microtus oecnomus, Myospalax fontanierii and Lepus oiostolus) at the alpine meadow ecosystem at the Tibetan Plateau in order to address variability in stable carbon isotope composition. Stable carbon isotope values of muscles remain steady and show no significant variations (-25.72 to -27.04 parts per thousand) among the four small mammal species. Based on the mass balance theory of stable isotopes, it is proposed that small herbivorous mammals mainly (or totally) rely on C3 grasses as food supply, and there is few or no distribution of C4 grasses at the ecosystem. The results reflect our previous study on the isotope patterns of plant species. Thus, stable carbon isotope analysis of muscles provides a method to address dietary selection and dietary variability in herbivores. In addition, stable carbon isotopic analyses can be used to address changes in vegetation distributions in ecosystem and paleovegetaion and paleoclimate.

Finite Element Solutions for Plane Strain Mode I Crack with Strain Grading Effect

In this paper, a new phenomenological theory with strain gradient effects is proposed to account for the size dependence of plastic deformation at micro- and submicro-length scales. The theory fits within the framework of general couple stress theory and three rotational degrees of freedom omega(i) are introduced in addition to the conventional three translational degrees of freedom mu(i). omega(i) is called micro-rotation and is the sum of material rotation plus the particles' relative rotation. While the new theory is used to analyze the crack tip field or the indentation problems, the stretch gradient is considered through a new hardening law. The key features of the theory are that the rotation gradient influences the material character through the interaction between the Cauchy stresses and the couple stresses; the term of stretch gradient is represented as an internal variable to increase the tangent modulus. In fact the present new strain gradient theory is the combination of the strain gradient theory proposed by Chen and Wang (Int. J. Plast., in press) and the hardening law given by Chen and Wang (Acta Mater. 48 (2000a) 3997). In this paper we focus on the finite element method to investigate material fracture for an elastic-power law hardening solid. With remotely imposed classical K fields, the full field solutions are obtained numerically. It is found that the size of the strain gradient dominance zone is characterized by the intrinsic material length l(1). Outside the strain gradient dominance zone, the computed stress field tends to be a classical plasticity field and then K field. The singularity of stresses ahead of the crack tip is higher than that of the classical field and tends to the square root singularity, which has important consequences for crack growth in materials by decohesion at the atomic scale. (C) 2002 Elsevier Science Ltd. All rights reserved.

Designing Of Partial Similarity Models And Evaluation Method In Polymer Flooding Experiment

Based on the scaling criteria of polymer flooding reservoir obtained in our previous work in which the gravity and capillary forces, compressibility, non-Newtonian behavior, absorption, dispersion, and diffusion are considered, eight partial similarity models are designed. A new numerical approach of sensitivity analysis is suggested to quantify the dominance degree of relaxed dimensionless parameters for partial similarity model. The sensitivity factor quantifying the dominance degree of relaxed dimensionless parameter is defined. By solving the dimensionless governing equations including all dimensionless parameters, the sensitivity factor of each relaxed dimensionless parameter is calculated for each partial similarity model; thus, the dominance degree of the relaxed one is quantitatively determined. Based on the sensitivity analysis, the effect coefficient of partial similarity model is defined as the summation of product of sensitivity factor of relaxed dimensionless parameter and its relative relaxation quantity. The effect coefficient is used as a criterion to evaluate each partial similarity model. Then the partial similarity model with the smallest effect coefficient can be singled out to approximate to the prototype. Results show that the precision of partial similarity model is not only determined by the number of satisfied dimensionless parameters but also the relative relaxation quantity of the relaxed ones.

Sensitivity Analysis Of The Dimensionless Parameters In Scaling A Polymer Flooding Reservoir

A set of scaling criteria of a polymer flooding reservoir is derived from the governing equations, which involve gravity and capillary force, compressibility of water, oil, and rock, non-Newtonian behavior of the polymer solution, absorption, dispersion, and diffusion, etc. A numerical approach to quantify the dominance degree of each dimensionless parameter is proposed. With this approach, the sensitivity factor of each dimensionless parameter is evaluated. The results show that in polymer flooding, the order of the sensitivity factor ranges from 10(-5) to 10(0) and the dominant dimensionless parameters are generally the ratio of the oil permeability under the condition of the irreducible water saturation to water permeability under the condition of residual oil saturation, density, and viscosity ratios between water and oil, the reduced initial oleic phase saturation and the shear rate exponent of the polymer solution. It is also revealed that the dominant dimensionless parameters may be different from case to case. The effect of some physical variables, such as oil viscosity, injection rate, and permeability, on the dominance degree of the dimensionless parameters is analyzed and the dominant ones are determined for different cases.

Electromechanical influence of crack velocity at bifurcation for poled ferroelectric materials

The piezoelastodynamic field equations are solved to determine the crack velocity at bifurcation for poled ferroelectric materials where the applied electrical field and mechanical stress can be varied. The underlying physical mechanism, however, may not correspond to that assumed in the analytical model. Bifurcation has been related to the occurrence of a pair of maximum circumferential stress oriented symmetrically about the moving crack path. The velocity at which this behavior prevails has been referred to as the limiting crack speed. Unlike the classical approach, bifurcation will be identified with finite distances ahead of a moving crack. Nucleation of microcracks can thus be modelled in a single formulation. This can be accomplished by using the energy density function where fracture initiation is identified with dominance of dilatation in relation to distortion. Poled ferroelectric materials are selected for this study because the microstructure effects for this class of materials can be readily reflected by the elastic, piezoelectic and dielectric permittivity constants at the macroscopic scale. Existing test data could also shed light on the trend of the analytical predictions. Numerical results are thus computed for PZT-4 and compared with those for PZT-6B in an effort to show whether the branching behavior would be affected by the difference in the material microstructures. A range of crack bifurcation speed upsilon(b) is found for different r/a and E/sigma ratios. Here, r and a stand for the radial distance and half crack length, respectively, while E and a for the electric field and mechanical stress. For PZT-6B with upsilon(b) in the range 100-1700 m/s, the bifurcation angles varied from +/-6degrees to +/-39degrees. This corresponds to E/sigma of -0.072 to 0.024 V m/N. At the same distance r/a = 0.1, PZT-4 gives upsilon(b) values of 1100-2100 m/s; bifurcation angles of +/-15degrees to +/-49degrees; and E/sigma of -0.056 to 0.059 V m/N. In general, the bifurcation angles +/-theta(0) are found to decrease with decreasing crack velocity as the distance r/a is increased. Relatively speaking, the speed upsilon(b) and angles +/-theta(0) for PZT-4 are much greater than those for PZT-6B. This may be attributed to the high electromechanical coupling effect of PZT-4. Using upsilon(b)(0) as a base reference, an equality relation upsilon(b)(-) < upsilon(b)(0) < upsilon(b)(+) can be established. The superscripts -, 0 and + refer, respectively, to negative, zero and positive electric field. This is reminiscent of the enhancement and retardation of crack growth behavior due to change in poling direction. Bifurcation characteristics are found to be somewhat erratic when r/a approaches the range 10(-2)-10(-1) where the kinetic energy densities would fluctuate and then rise as the distance from the moving crack is increased. This is an artifact introduced by the far away condition of non-vanishing particle velocity. A finite kinetic energy density prevails at infinity unless it is made to vanish in the boundary value problem. Future works are recommended to further clarify the physical mechanism(s) associated with bifurcation by means of analysis and experiment. Damage at the microscopic level needs to be addressed since it has been known to affect the macrocrack speeds and bifurcation characteristics. (C) 2002 Published by Elsevier Science Ltd.

Effects of physical parameter range on dimensionless variable sensitivity in water flooding reservoirs

The similarity criterion for water flooding reservoir flows is concerned with in the present paper. When finding out all the dimensionless variables governing this kind of flow, their physical meanings are subsequently elucidated. Then, a numerical approach of sensitivity analysis is adopted to quantify their corresponding dominance degree among the similarity parameters. In this way, we may finally identify major scaling law in different parameter range and demonstrate the respective effects of viscosity, permeability and injection rate.

Effects of physical parameter range on dimensionless variable sensitivity in water flooding reservoirs

The similarity criterion for water flooding reservoir flows is concerned with in the present paper. When finding out all the dimensionless variables governing this kind of flow, their physical meanings are subsequently elucidated. Then, a numerical approach of sensitivity analysis is adopted to quantify their corresponding dominance degree among the similarity parameters. In this way, we may finally identify major scaling law in different parameter range and demonstrate the respective effects of viscosity, permeability and injection rate.

Higher-order analysis of crack tip fields in elastic power-law hardening materials

A HIGHER-ORDER asymptotic analysis of a stationary crack in an elastic power-law hardening material has been carried out for plane strain, Mode 1. The extent to which elasticity affects the near-tip fields is determined by the strain hardening exponent n. Five terms in the asymptotic series for the stresses have been derived for n = 3. However, only three amplitudes can be independently prescribed. These are K1, K2 and K5 corresponding to amplitudes of the first-, second- and fifth-order terms. Four terms in the asymptotic series have been obtained for n = 5, 7 and 10; in these cases, the independent amplitudes are K1, K2 and K4. It is found that appropriate choices of K2 and K4 can reproduce near-tip fields representative of a broad range of crack tip constraints in moderate and low hardening materials. Indeed, fields characterized by distinctly different stress triaxiality levels (established by finite element analysis) have been matched by the asymptotic series. The zone of dominance of the asymptotic series extends over distances of about 10 crack openings ahead of the crack tip encompassing length scales that are microstructurally significant. Furthermore, the higher-order terms collectively describe a spatially uniform hydrostatic stress field (of adjustable magnitude) ahead of the crack. Our results lend support to a suggestion that J and a measure of near-tip stress triaxiality can describe the full range of near-tip states.