High Aspect Ratio (L/D) Riser Viv Prediction Using Wake Oscillator Model

A two-dimensional (2-D) vortex-induced vibration (VIV) prediction model for high aspect ratio (LID) riser subjected to uniform and sheared flow is studied in this paper. The nonlinear structure equations are considered. The near wake dynamics describing the fluctuating nature of vortex shedding is modeled using classical van der Pol equation. A new approach was applied to calibrate the empirical parameters in the wake oscillator model. Compared the predicted results with the experimental data and computational fluid dynamic (CFD) results. Good agreements are observed. It can be concluded that the present model can be used as simple computational tool in predicting some aspects of VIV of long flexible structures. (C) 2008 Elsevier Ltd. All rights reserved.

Thermocapillary Flows In Liquid Bridges Of Molten Tin With Small Aspect Ratios

Numerical simulations were conducted to study thermocapillary flows in short half-zone liquid bridges of molten tin with Prandtl number Pr = 0.009, under ramped temperature difference. The spatio-temporal structures in the thermocapillary flows in short half-zone liquid bridges with aspect ratios As = 0.6, 0.8, and 1.0 were investigated. The first critical Marangoni numbers were compared with those predicted by linear stability analyses (LSA). The second critical Marangoni numbers for As = 0.6 and 0.8 were found to be larger than that for As = 1.0. The time evolutions of the thermocapillary flows exhibited unusual features such as a change in the azimuthal wave number during the three-dimensional stationary (non-oscillating) flow regime, a change in the oscillation mode during the three-dimensional oscillatory flow regime, and the decreasing and then increasing of amplitudes in a single oscillation mode. The effects of the ramping rate of the temperature difference on the flow modes and critical conditions were studied as well. In this paper, the experimental observability of the critical conditions was also discussed. (C) 2008 Elsevier Inc. All rights reserved.

Measurement of velocity profiles in a rectangular microchannel with aspect ratio α = 0.35

In this work, we measured 14 horizontal velocity profiles along the vertical direction of a rectangular microchannel with aspect ratio alpha = h/w = 0.35 (h is the height of the channel and w is the width of the channel) using microPIV at Re = 1.8 and 3.6. The experimental velocity profiles are compared with the full 3D theoretical solution, and also with a Poiseuille parabolic profile. It is shown that the experimental velocity profiles in the horizontal and vertical planes are in agreement with the theoretical profiles, except for the planes close to the wall. The discrepancies between the experimental data and 3D theoretical results in the center vertical plane are less than 3.6%. But the deviations between experimental data and Poiseuille's results approaches 5%. It indicates that 2D Poiseuille profile is no longer a perfect theoretical approximation since a = 0.35. The experiments also reveal that, very near the hydrophilic wall (z = 0.5-1 mu m), the measured velocities are significantly larger than the theoretical velocity based on the no-slip assumption. A proper discussion on some physical effects influencing the near wall velocity measurement is given.

Fast and facile preparation of superhigh aspect-ratio Cu-thiourea nanowires in large quantity

Superhigh aspect-ratio Cu-thiourea (Cu(tu)) nanowires have been synthesized in large quantity via a fast and facile method. Nanowires of Cu (tu)Cl center dot 0.5H(2)O and Cu(tu)Br center dot 0.5H(2)O were found to be 60-100 nm and 100-200 nm, in diameter, and could extend to several millimeters in length. It is found to be the most convenient and facile approach to the fabrication of one-dimensional superhigh aspect-ratio nanomaterials in large scale so far.

ADVANCED ELECTROANALYTICAL CHEMISTRY IN CHINA .1. GENERAL ASPECT AND SOME METHODOLOGIES

The Research on Electroanalytical chemistry in China started mainly from the beginning of new China in 1949. It has already good basis and development nowadays. A review with references to the end of seventies has been published in "Reviews in Analytical Chemistry" 1) and in a book titled "Fifty years of Chinese Chemistry" edited by the Chinese Chemical Society in 1985 2). Since then more than thousand papers have been published, and it is impossible and also not necessary to describe all of them. This review only deals with the main progress of electroanalytical chemistry in China in recent years. Some new developed methodologies will be reviewed by S. Dong in the next article.

异文化圈社会规范层次结构模型的比较研究

The relationship between the management and the culture was explored from the view of social norm's theory. In concrete terms, the differences of the hierarchical structure of the social norm among the Chinese, the Japanese and the American were studied systematically by using interview, case study, questionnaire survey and the structure equation model, etc. The results were: (1) The basic two types of the social norms of the Chinese, the American and the Japanese were the same: the external control norm and the internal control norm. The basic dimensions of the two types of norms composed of moral principle, value orientation, the law and the rules, and the social custom were consistent among the three countries. Furthermore, the dimensions of social norms were hierarchical because of the functioning of the different culture, which consisted of the hierarchical structure system. (2) Although there were the same dimensions among the three countries, the contents of these dimensions had both the common norms surpassing the specific culture and the particular norms depending on the specific culture. (3) The basic structures of the social norms in China and in Japan were the same: the internal control norms played a main role and the external control norm was auxiliary. On one hand, within the internal norm of the Chinese, the moral principle was the main force while the value orientation was the supplementary; within the external norm, the law and the rules was the main force while the social culture custom was supplementary. On the other hand, the relationship between the external and the internal dimensions of the Japanese turned out to be contrary to those of the Chinese. (4) The structure of the American social norms were different from the Chinese: for the American, the external control norm played a main role while the internal control norm was assistant. Furthermore, the law and the rule was the major aspect while the social costumes was the second in the external control dimension. In addition, the value orientation led the performance style of the American, while the moral principle played the second role in the internal control structure. (5) The social norms related to the management performance were found including work responsibility, organization commitment, meeting making-decision, communication style, work duty and interpersonal conflict by inventory and case study. The mangers from China, Japan and America had significant different views on paying attention to the management norms. In a word, the culture differences of the social norm were the fundamental reason of the management conflict.