1,2,4-三氯苯胁迫对大豆下胚轴膜脂过氧化的影响

以盆栽法研究了不同浓度1,2,4-三氯苯(TCB)胁迫对大豆下胚轴膜脂过氧化作用的影响。结果表明,100—300μg·g-1TCB胁迫初期(1—3d)促使萌发大豆下胚轴内过氧化氢(H2O2)的积累显著增加,同时伴随质膜电解质渗漏率和组织自动氧化速率升高,显示发生膜脂质过氧化作用。TCB胁迫1—6d使活性氧清除酶功能紊乱,其中过氧化物酶(POD)活性升高,过氧化氢酶(CAT)活性开始上升后转为下降。推测大豆下胚轴受TCB胁迫伤害过程中,活性氧代谢失衡造成的膜脂质过氧化起着重要作用。

填充油的种类对Fe系1,2-聚丁二烯性能的影响

研究了芳烃油和环烷烃油对充油铁系1,2-聚丁二烯橡胶性能的影响。结果表明,基础胶充油后门尼粘度值下降,可塑性增加,混炼行为变佳;填充芳烃油比填充环烷烃油的橡胶在拉伸强度、撕裂强度、伸长率和生胶门尼值等方面均有所提高;充油后虽然硫化胶硬度降低,但是生热和耐磨性能提高。填充芳烃油可适当提高硫化胶的抗湿滑性,但滚动阻力也升高。环烷烃油可降低硫化胶的滚动阻力。充油可适当改善胶料的抗老化性能。

二苯基-15-冠-5加速钠离子和钾离子在微米管支撑的微-水/1,2-二氯乙烷界面上的转移反应

玻璃微米管针尖可用于支撑微米级的水/1,2-二氯乙烷（W/DCE）界面,并用来研究二苯基-15-冠-5（DB15C5）加速钠离子和钾离子转移反应的机理和求算其络合物的稳定常数.在两种极限情况下,即水相中金属离子浓度远大于有机相中DB15C5的浓度（DB15C5扩散控制过程）和有机相中DB15C5的浓度远大于水相中金属离子浓度（金属离子扩散控制过程）,循环伏安研究表明,加速钠离子转移反应均发生1∶1（金属离子:载体）的界面络合转移过程,相应的一级络合常数分别为logβ1=8.97±0.05和logβ1=8.63±0.03.而对于加速钾离子转移反应,当 DB15C5扩散控制时发生的是一个1:2的界面络合转移过程,当钾离子扩散控制时,在电位窗内却观察到两个过程:一个较低电位的1∶2的界面络合转移过程和一个较高电位的1∶1界面络合转移过程.两种极限条件下所求算的钾离子和DB15C5的二级络合常数分别为logβ1=13.64±0.03和logβ2=11.34±0.24.

同多酸和杂多酸修饰微电极的电化学研究——Ⅳ.1:2-磷钼杂多酸薄膜修饰碳纤维微电极的制备和电化性质

本文报道了1:12-磷铜杂多酸(PMo_(12)薄膜修饰碳纤维(CF)微电极的制备及其电化学性质。采用简单,快速的浸渍吸附制备的PMo_(12)薄膜修饰CF电极在酸性介质中具有很高的稳定性和氧化还原活性,电解质溶液的pH值和扫描电位范围对PMo_(12)膜的稳定性和电化学性质产生较大的影响。另一方面,PMo_(12)薄膜修饰CF微电极对酸性水溶液中的PMo_(12)和氯酸根离子(ClO)_3~-)的电催化还原作用也进行了描述。

中国材料工程大典—信息功能材料工程

本书是《中国材料工程大典》中的卷目之一。 信息功能材料是信息科学技术和信息产业发展的基础和先导。21世纪将是以信息产业为核心的知识经济时代，对信息技术和信息资源的竞争将更加激烈。我国电子信息行业2004年完成产品销售收入达26500亿元，多年来已居外贸出口首位，并继续以高出工业发展速度10％的速度发展，已成为世界信息产业大国。加快由信息产业大国向信息产业强国迈进的步伐，是我们广大从事信息技术，特别是信息功能材料工作者义不容辞的责任。希望《中国材料工程大典》中《信息功能材料工程》卷的出版，将有力推动我国信息技术和信息产业的健康发展。 《信息功能材料工程》分上、中、下卷，共设20篇，约600万字。它涉及到信息的获取、传输、存储、显示和处理等主要技术用的材料与器件，是目前我国该领域比较完整的专业工具书。参加这部书编写的有中科院、高校和部分企业的专家教授近200名。参加编写的主要单位有中科院半导体研究所、中科院物理研究所、中科院微电子研究所、中科院上海精密光学机械研究所、中科院上海红外技术物理研究所、中科院长春应用化学研究所、中科院合肥固体物理所、南京大学、清华大学、西安理工大学、北京有色金属研究总院、武汉邮电科学研究院等。历时近3年完稿。由王占国、陈立泉、屠海令任主编并统稿。 本卷各篇不仅全面系统地反映了国外信息功能材料研究领域的现状、最新进展和发展趋势，而且也特别注重我国在该领域的研发和产业化方面取得的成果，力图使其具有实用性、先进性和权威性。本书适合于从事信息功能材料的科研工作者和工程技术人员查阅使用，也可供有关师生参考。

硬壳蛤性腺发育和卵母细胞成熟机理初步研究

采用体外药物诱导的方法，研究了5-羟色胺（5-hydroxytryptamine，5-HT）诱导的硬壳蛤卵母细胞成熟过程中cAMP信号通路的作用。结果表明，5-HT （0.01—100µM）均能够显著地诱导硬壳蛤卵母细胞的成熟。磷酸二酯酶抑制剂—咖啡因、茶碱和IBMX（3-异丁基-1-甲基黄嘌呤）可以单独抑制卵母细胞的自发成熟，但效果不显著。10mM的咖啡因和茶碱以及5mM的IBMX能够显著地抑制5-HT的诱导效果。dbcAMP（双丁酰基环腺苷一磷酸）不但能够抑制卵母细胞的自发成熟，而且还可以抑制5-HT诱导的成熟。因此，cAMP信号通路参与了5-HT诱导的硬壳蛤卵母细胞的成熟过程，并且该信号通路起着负调控的作用。 研究了PLC（磷脂酶C）和PKC（蛋白激酶C）的激活剂/抑制剂对5-羟色胺诱导的卵母细胞成熟的影响。高浓度的新霉素（PLC抑制剂）可以抑制5-HT诱导的卵母细胞的成熟，而DMBA（9,10-Dimethy-1,2-benzanthracene，9,10–二甲基胆蒽，PLC激活剂）则能够促进成熟。PMA（phorbol 12-myristate 13-acetate，佛波十四烷酸乙酸酯，PKC激活剂）能够抑制5-HT诱导的成熟，而Spingosine（PKC抑制剂）则可以促进卵母细胞的成熟。从而推测，5-HT诱导的卵母细胞成熟需要磷脂酰肌醇信号通路的激活。PLC浓度的降低能够抑制5-HT诱导的卵母细胞成熟；PKC浓度的降低则会促进卵母细胞的成熟。因此，在硬壳蛤卵母细胞的成熟过程中，PLC起促进的作用，DAG（二酰肌甘油）–PKC通路则起抑制的作用。 细胞外高浓度Ca2+能够促进硬壳蛤卵母细胞的成熟，Ca2+离子载体A23187也可以促进硬壳蛤卵母细胞的成熟。1-100µM异搏定（Verapamil，钙离子通道阻断剂）能够抑制卵母细胞的成熟，而100µM的Verapamil能够完全抑制其成熟。上述结果表明细胞外Ca2+对硬壳蛤卵母细胞的成熟是必需的，而且起到促进卵母细胞成熟的作用。三氟拉嗪（TFP，Ca2+与CaM结合的拮抗剂）能够抑制卵母细胞的成熟，高浓度的三氟拉嗪（1mM）能够完全抑制卵母细胞的成熟。说明CaM起到促进卵母细胞成熟的作用。可见，Ca2+通过与CaM的相互作用，共同起到促进硬壳蛤卵母细胞成熟的作用。 5-HT诱导成熟的卵母细胞可以完成受精过程，其受精过程以及幼虫发育情况与正常受精发育过程类似，没有显著差异。高浓度的新霉素可以抑制受精过程，而茶碱和咖啡因对受精没有影响。从而推测，磷脂酰肌醇信号通路参与了硬壳蛤卵母细胞的受精过程，而cAMP信号通路可能没有参与受精过程。 发现硬壳蛤的性腺发育与我国常见的双壳类如泥蚶相似。硬壳蛤卵母细胞中卵黄粒主要由线粒体、高尔基液泡、内质网和微吞饮泡形成。

(Ce_(0.9)Nd_(0.1))_(1-x)Mo_xO_(2-δ)(0.00≤x≤0.10)的合成、表征与电性能

采用溶胶-凝胶法合成(Ce0.9Nd0.1)1-xMoxO2-δ(x=0.00、0.02、0.05、0.10)氧化物,通过X射线衍射(XRD)、场发射扫描电镜(FESEM)等手段对氧化物进行结构表征,交流阻抗谱测试电性能.结果表明:所有样品均为单一萤石立方结构;少量MoO3的加入提高了材料的致密性,降低了材料的总电阻、晶界电阻和晶界电阻在总电阻中所占比例,提高了材料的电导率.1200℃烧结样品24h,测试温度700℃时,(Ce0.9Nd0.1)1-xMoxO2-δ(x=0.00)总电导率和晶界电导率分别为0.05和0.19S·m-1,掺Mo材料(Ce0.9Nd0.1)1-xMoxO2-δ(x=0.02)的总电导率和晶界电导率分别为2.42和3.96S·m-1.

荧光衍生试剂1-[2-（对甲苯磺酸醋）乙基]2-苯基咪唑[4,5-f]9,10-菲的合成及其在长链脂肪酸分析中的应用

合成了新的荧光衍生试剂1-[2-（对甲苯磺酸酯）乙基]-2-苯基咪唑[4,5-f]9,10-菲（TsEPIP），并将其作为柱前衍生化试剂，在Eclipse XDB-C：色谱柱上采用梯度洗脱实现了11种长链（C_(20)～C_(30)）游离脂肪酸（FFA）衍生物的基线分离。利用柱后在线的串联质谱并以大气压化学电离源（APCI）的正离子模式实现了各组分的质谱定性。对土壤及3种苔醉（东亚毛灰鲜、锦丝鲜、羽平鲜）中FFA组分的定量结果表明，苔鲜植物从土壤中富集了大量的长链游离脂肪酸。荧光检测的激发波长和发射波长分别为260 nm和380 nm。线性回归系数大于0.9996，检测限为26.19～76.67 fmol。所建立的方法具有良好的重现性，对实际样品的测定结果令人满意。

2-(2-Phenyl-1H-phenanthro-[9,10-d]imidazole-1-yl)-acetic acid (PPIA) and its application for determination of amines by high performance liquid chromatography with fluorescence detection and identification with mass spectroscopy/atmospheric pressure chemical ionization

A simple, sensitive, and mild method for the determination of amino compounds based on a condensation reaction with 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide hydrochloride (EDC-HCI) as the dehydrant with fluorescence detection has been developed. Amines were derivatized to their acidamides with labeling reagent 2-(2-phenyl-1H-phenanthro-[9,10-d]imidazole-1-yl)-acetic acid (PPIA). Studies on derivatization conditions indicated that the coupling reaction proceeded rapidly and smoothly in the presence of a base catalyst in acetonitrile to give the corresponding sensitively fluorescent derivatives with an excitation maximum at lambda(ex) 260nm and an emission maximum at lambda(em) 380nm. The labeled derivatives exhibited high stability and were enough to be efficiently analyzed by high-performance liquid chromatography. Identification of derivatives was carried out by online post-column mass spectrometry (LC/APCI-MS/MS) and showed an intense protonated molecular ion corresponding m/z [MH](+) under APCI in positive-ion mode. At the same time, the fluorescence properties of derivatives in various solvents or at different temperature were investigated. The method, in conjunction with a gradient elution, offered a baseline resolution of the common amine derivatives on a reversed-phase Eclipse XDB-C-8 column. LC separation for the derivatized amines showed good reproducibility with acetonitrile-water as mobile phase. Detection limits calculated from 0.78 pmol injection, at a signal-to-noise ratio of 3, were 3.1-18.2 fmol. The mean intra- and inter-assay precision for all amine levels were < 3.85% and 2.11%, respectively. Excellent linear responses were observed with coefficients of > 0.9996. The established method for the determination of aliphatic amines from real wastewater and biological samples was satisfactory. (c) 2006 Elsevier B.V. All rights reserved.

Pre-column derivatization of amines with 1,2-benzo-3,4-dihydrocarbazole-9-isopropyl chloroformate followed by LC-fluorescence and LC-APCI-MS

A pre-column derivatization method for the sensitive determination of amines using the labeling reagent 1,2-benzo-3,4-dihydrocarbazole-9-isopropyl chloroformate (BCIC-Cl) followed by high-performance liquid chromatography with fluorescence detection has been developed. Identification of derivatives is carried out by high performance liquid chromatography/atmospheric pressure chemical ionization (LC-APCl-MS-MS). The chromophore of 2-(9-carbazole)-ethyl chloroformate (CEOC) reagent is replaced by 1,2-benzo-3,4-dihydrocarbazole-9-isopropyl functional group, which results in a sensitive fluorescence derivatizing reagent BCIC-Cl. BCIC-Cl can easily and quickly label amines. Derivatives are stable enough to be efficiently analyzed by high-performance liquid chromatography and show an intense protonated molecular ion corresponding m/z [MH](+) under APCl in positive-ion mode. The collision-induced dissociation of protonated molecular ion formed a product at m/z 260 corresponding to the cleavage of CH2-OCO bond. Studies on derivatization demonstrate excellent derivative yields over the pH 9.0-10.0. Maximal yields close to 100% are observed with a 3 to 4-fold molar reagent excess. In addition, the detection responses for BCIC derivatives are compared with those obtained using CEOC and FMOC as derivatization reagents. The ratios of l(BCIC)/l(CEOC) and l(BCIC)/l(FMOC) are, respectively, 1.23-3.14 and 1.25-3.08 for fluorescent (FL) responses (here, l is relative fluorescence intensity). Separation of the derivatized amines had been optimized on reversed-phase Eclipse XDB-C-8 column. Detection limits are calculated from 1.0 pmol injection, at a signal-to-noise ratio of 3, are 10.6-37.8 fmol. The mean interday accuracy ranges from 94 to 105% for fluorescence detection with the largest mean %CV < 7.5. The mean interday precision for all standards is < 6.0% of the expected concentration. Excellent linear responses are observed with coefficients of > 0.9997.

Development of a sensitive fluorescent derivatization reagent 1,2-benzo-3,4-dihydrocarbazole-9-ethyl chloroformate (BCEOC) and its application for determination of amino acids from seeds and bryophyte plants using high-performance liquid chromatography with fluorescence detection and identification with electrospray ionization mass spectrometry

A pre-column derivatization method for the sensitive determination of amino acids and peptides using the tagging reagent 1,2-benzo-3,4dihydrocarbazole-9-ethyl chloroformate (BCEOC) followed by high-performance liquid chromatography with fluorescence detection has been developed. Identification of derivatives was carried out by liquid chromatography/electrospray ionization mass spectrometry (LC/ESI-MS/MS). The chromophore of 2-(9-carbazole)-ethyl chloroformate (CEOC) reagent was replaced by 1,2-benzo-3,4-dihydrocarbazole functional group, which resulted in a sensitive fluorescence derivatizing reagent BCEOC. BCEOC can easily and quickly label peptides and amino acids. Derivatives are stable enough to be efficiently analyzed by high-performance liquid chromatography. The derivatives showed an intense protonated molecular ion corresponding m/z (M + H)(+) under electrospray ionization (ESI) positive-ion mode with an exception being Tyr detected at negative mode. The collision-induced dissociation of protonated molecular ion formed a product at m/z 246.2 corresponding to the cleavage of C-O bond of BCEOC molecule. Studies on derivatization demonstrate excellent derivative yields over the pH 9.0-10.0. Maximal yields close to 100% are observed with a 3-4-fold molar reagent excess. Derivatives exhibit strong fluorescence and extracted detzvatization solution with n-hexane/ethyl acetate (10:1, v/v) allows for the direct injection with no significant interference from the major fluorescent reagent degradation by-products, such as 1,2-benzo-3,4-dihydrocarbazole-9-ethanol (BDC-OH) (a major by-product), mono- 1,2-benzo-3,4-dihydrocarbazole-9-ethyl carbonate (BCEOC-OH) and bis-(1,2-benzo-3,4-dihydrocarbazole-9-ethyl) carbonate (BCEOC)(2). In addition, the detection responses for BCEOC derivatives are compared to those obtained with previously synthesized 2-(9-carbazole)-ethyl chloroformate (CEOC) in our laboratory. The ratios AC(BCEOC)/AC(CEOC) = 2.05-6.51 for fluorescence responses are observed (here, AC is relative fluorescence response). Separation of the derivatized peptides and amino acids had been optimized on Hypersil BDS C-18 column. Detection limits were calculated from 1.0 pmol injection at a signal-to-noise ratio of 3, and were 6.3 (Lys)-177.6 (His) fmol. The mean interday accuracy ranged from 92 to 106% for fluorescence detection with mean %CV < 7.5. The mean interday precision for all standards was < 10% of the expected concentration. Excellent linear responses were observed with coefficients of > 0.9999. Good compositional data could be obtained from the analysis of derivatized protein hydrolysates containing as little as 50.5 ng of sample. Therefore, the facile BCEOC derivatization coupled with mass spectrometry allowed the development of a highly sensitive and specific method for the quantitative analysis of trace levels of amino acids and peptides from biological and natural environmental samples. (c) 2005 Elsevier B.V. All rights reserved.

Highly efficient and stable organic light-emitting diodes employing MoO3-doped perylene-3, 4, 9, 10-tetracarboxylic dianhydride as hole injection layer

We report highly efficient and stable organic light-emitting diodes (OLEDs) with MoO3-doped perylene-3, 4, 9, 10-tetracarboxylic dianhydride (PTCDA) as hole injection layer (HIL). A green OLED with structure of ITO/20 wt% MoO3: PTCDA/NPB/Alq(3)/LiF/Al shows a long lifetime of 1012 h at the initial luminance of 2000 cd/m(2), which is 1.3 times more stable than that of the device with MoO3 as HIL. The current efficiency of 4.7 cd/A and power efficiency of 3.7 lm/W at about 100 cd/m(2) have been obtained. The charge transfer complex between PTCDA and MoO3 plays a decisive role in improving the performance of OLEDs.

Generation of 10 GHz, 1.9 ps optical pulse train using semiconductor optical amplifier and silica-based highly nonlinear fiber

We propose a simple approach to generate a high quality 10 GHz 1.9 ps optical pulse train using a semiconductor optical amplifier and silica-based highly nonlinear fiber. An optical pulse generator based on our proposed scheme is easy to set up with commercially available optical components. A 10 GHz, 1.9 ps optical pulse train is obtained with timing jitter as low as 60 fs over the frequency range 10 Hz-1 MHz. With a wavelength tunable CW laser, a wide wavelength tunable span can be achieved over the entire C band. The proposed optical pulse generator also can operate at different repetition rates from 3 to 10 GHz.