圆域内双柱整流现象的数值模拟

基于Reyleigh整流定律，利用ψ－ε形式的定常不可压N-S方程，数值模拟了双柱在圆域内 作高频小振幅振动时所产生的定常整流流动。揭示了流动随整流雷诺数的演化特性。此外就求解ψ－ε形式的N-S方程所涉及的定解边界条件问题，亦进行了必要的讨论。

Microstructure and mechanical properties of slowly cooled Cu47.5Zr47.5Al5

Cu47.5Zr47.5Al5 was prepared by arc melting and solidified in situ by suction casting into 2-5-mm-diameter rods under various cooling rates (200-2000 K/s). The microstructure was investigated along the length of the rods by electron microscopy, differential scanning calorimetry and mechanical properties were investigated under compression. The microstructure of differently prepared specimens consists of macroscopic spherical shape chemically inhomogeneous regions together with a low volume fraction of randomly distributed CuZr B2 phase embedded in a 2-7 nm size clustered "glassy-martensite" matrix. The as-cast specimens show high yield strength (1721 MPa), pronounced work-hardening behavior up to 2116 MPa and large fracture strain up to 12.1-15.1%. The fracture strain decreases with increasing casting diameter. The presence of chemical inhomogenities and nanoscale "glassy-martensite" features are beneficial for improving the inherent ductility of the metallic glass.

Space Experimental Investigation On Thermocapillary Migration Of Bubbles

Results from a space experiment on bubble thermocapillary migration conducted on board the Chinese 22nd recoverable satellite were presented. Considering the temperature field in the cell was disturbed by the accumulated bubbles, the temperature gradient was corrected firstly with the help of the temperature measurement data at six points and numerical simulation. Marangoni number (Ma) of single bubble migrating in the space experiment ranged from 98.04 to 9288, exceeding that in the previous experiment data. The experiment data including the track and the velocity of two bubble thermocapillary migration showed that a smaller bubble would move slower as it was passed by a larger one, and the smaller one would even rest in a short time when the size ratio was large enough.

Anisotropic Deformation Of Polystyrene Particles By Mev Au Ion Irradiation

MeV An irradiation leads to a shape change of polystyrene (PS) and SiO2 particles from spherical to ellipsoidal, with an aspect ratio that can be precisely controlled by the ion fluence. Sub-micrometer PS and SiO2 particles were deposited on copper substrates and irradiated with Au ions at 230 K, using an ion energy and fluence ranging from 2 to 10 MeV and 1 x 10(14) ions/cm(2) to 1 x 10(15) ions/cm(2). The mechanisms of anisotropic deformation of PS and SiO2 particles are different because of their distinct physical and chemical properties. At the start of irradiation, the volume of PS particles decrease, then the aspect ratio increases with fluence, whereas for SiO2 particles the volume remains constant. (C) 2008 Elsevier B.V. All rights reserved.

黏弹性材料界面裂纹应力场奇性分析

研究两半无限大黏弹性体间Griffith界面裂纹在简谐载荷作用下裂纹尖端动应力场的奇异特性。通过引入裂纹张开位移和裂纹位错密度函数，相应的混合边值问题归结为一组耦合的奇异积分方程。渐近分析表明裂尖动应力场的奇异特征完全包含在奇异积分方程的基本解中。通过对基本解的深入分析发现黏弹性材料界面裂纹尖动应力场具有与材料参数和外载荷频率相关的振荡奇异特性。以标准线性固体黏弹材料为例讨论了材料参数和载荷频率对奇性指数和振荡指数的影响。

三维链网模型及其参数标定

提出一种材料模型，由三维空间取向的平行弹簧束作为构架，讨论了按空间取向进行离散的方式。实现立体角划分的最优化。构造了由一维构元组成的三维链网体胞，给出了体胞几何，物理参数的标定方法。证明该体胞能精确模拟Pisson比从0-1／2的材料行为，突破了已往模型0-1/3限制。探讨了模型简化问题，实现了模拟精度高而计算费用低的统一，举例论述了该模型模拟短纤维增强复合材料的独特优点。

流量配比对Coil增益分布影响的数值研究

利用三维CFD技术,通过求解层流Navier-stokes方程与组分输运方程,对简化后的化学氧碘激光RADICL模型进行数值模拟与分析,结合10种组分和21个基元反应的化学反应模型,对COIL亚声速段横向射流情况下,不同的主副流流量配比对化学氧碘激光器性能的影响进行分析与比较.结果证明,过高或过低的碘分子浓度状态均不利于合理、可观的小信号增益系数产生.存在一个最佳流量配比范围,与之对应的工作状态下,COIL的小信号增益系数会得到显著提高.

Nuclear fusion from Coulomb explosions of deuterated methane clusters subjected to ultraintense femtosecond laser pulses

This paper reports that Coulomb explosions taken place in the experiment of heteronuclear deuterated methane clusters ((CD4)(n)) in a gas jet subjected to intense femtosecond laser pulses (170 mJ, 70 fs) have led to table-top laser driven DD nuclear fusion. The clusters produced in supersonic expansion had an average energies of deuterons produced in the laser-cluster interaction were 60 and 1.5 KeV, respectively. From DD collisons of energetic deuterons, a yield of 2.5(+/-0.4)x10(4) fusion neutrons of 2.45 MeV per shot was realized, giving rise to a neutron production efficiency of about 1.5 x 10(5) per joule of incident laser pulse energy. Theoretical calculations were performed and a fairly good agreement of the calculated neutron yield with that obtained from the present experiment was found.

Conical emission of Ti : sapphire femtosecond laser pulses propagating in water

Conical emission is investigated for Ti:sapphire femtosecond laser pulses propagating in water. The colored rings can be observed in the forward direction due to the constructive and destructive interference of transverse wavevector, which are induced by the spatio-temporal gradient of the free-electron density. With increasing input laser energy, due to filamentation and pulse splitting induced by the plasma created by multiphoton excitation of electrons from the valence band to the conduction band, the on-axis spectrum of the conical emission is widely broadened and strongly modulated with respect to input laser spectrum, and finally remains fairly constant at higher laser energy due to intensity clamping in the filaments.

透镜自重变形引起波像差的有限元分析

在用大口径、长焦距平行光管模拟激光远场特性时，其光组透镜在重力作用下的变形不能忽略，为了分析对出射光束质量的影响，采用有限元分析软件“ANSYS”建立了平行光管光组中声400mm平凸透镜的有限元模型，给出一种分析透镜轴向变形引起的波像差的方法，在不同工况下，计算了平凸透镜在重力作用下轴向变形的峰谷值和均方根值，对轴向变形量均方根值最小工况画出了透镜表面变形的等值线图，计算了声350mm通光口径内的波像差峰谷值和均方根值，对平行光管光组的波像差做出估计，验证了设计的合理性。

相位延迟器复合旋光器技术及其应用

提出了一种将相位延迟器复合为旋光器的技术，利用米勒矩阵对其原理与应用进行了分析。相位延迟器复合为旋光器时，将相位延迟器置于两块1／4波片之间，使两块1／4波片的快轴相互垂直且与相位延迟器的快轴分别成±45°角。利用相位延迟器复合为旋光器技术，可以将相位调制器转换为偏振方向调制器。实验验证了相位延迟器复合为旋光器和相位调制器转换为偏振方向调制器的可行性。

基于傅里叶变换的光纤探头光谱特性校正方法的研究

针对光纤自身对光谱的非线性衰减的影响，提出了一种基于傅里叶变换的光谱校正方法。首先对是否经过光纤的两种情况下光电倍增管的输出电流进行傅里叶变换，得到光谱频域中的校正函数，然后通过傅里叶逆变换得到光谱域中的校正函数。为实现测试，建立一个光电检测系统，在可见光范围内进行测试。分别对是否带有光纤的两种情况下数据进行采集，使用该校正方法可以使光线的衰减得到较好的修正，误差小于1．54％。实验结果表明，该方法对特定的光纤传导系统的光谱非线性衰减有较好的校正效果。