Intensity Distribution Design for Laser-Induced Thermal Loading Based on Numerical Simulation

To accomplish laser-induced thermal loading simulation tests for pistons,the Gaussian beam was modulated into multi-circular beam with specific intensity distribution.A reverse method was proposed to design the intensity distribution for the laser-induced thermal loading based on finite element(FE) analysis.Firstly,the FE model is improved by alternating parameters of boundary conditions and thermal-physical properties of piston material in a reasonable range,therefore it can simulate the experimental resul...

Pull-in Instability Study of Carbon Nanotube Tweezers Under the Influence of Van der Waals Forces

The pull-in instability of two nanotubes under van der Waals force is studied. The cantilever beam with large deformation model is used. The influence of nanotube parameters such as the interior radius, the gap distance between the two nanotubes, etc, on the pull-in instability is studied. The critical nanotube length is determined for each specific set of nanotube parameters. The Galerkin method is applied to discretize the governing equations, and it shows good convergence.

基于数值模拟的激光热负荷光强分布设计

激光活塞热负荷模拟实验需将高斯光束调制成按特定光强分布的多个同心光环，为此提出了基于有限元（FE）分析的激光热负荷光强分布反求设计思想。应用最初设计的整形器对有限元模型进行校核，在合理的范围内调整边界条件参数和活塞材料热物性参数，使模拟结果与实验结果吻合；对于校核后的有限元模型，通过调整光强分布和加载条件以接近目标温度场，从而获得整形器优化设计方案。基于上述方法可实现由目标温度场反求设计出光场分布。研究表明，采用数值模拟方法进行研究，可大幅度缩短整形器设计周期、降低设计费用，并起到虚拟实验的作用，从而提高了热负荷实验的可控性和可预见性。

COLOR-HOLOGRAPHY USING THE ANGULAR SELECTIVITY OF VOLUME RECORDING MEDIA

A display hologram of an object can be recorded and reconstructed in three primary colors if the angular selectivity of volume recording media is exploited. Three holograms are recorded in the same medium, each at a different primary color. These three holograms are reconstructed by simultaneous illumination of the hologram with the original reference beams. By proper choice of the angles that the reference beams make to the hologram, it is possible to suppress strongly cross talk between the different reconstructions (e.g., the red object reconstruction in green light). The technique exhibits high resolution, high diffraction efficiency, and vivid colors. Through the addition of three holographically recorded volume gratings it is possible to reconstruct the hologram with a beam of white light. The saturation and brightness of each primary color in the reconstruction can be adjusted by selection of an appropriate thickness for the corresponding grating.

Measurement of two-photon excitation cross-section of a new symmetric-type fluorene derivative

A new dye, 2,7-bis(4-methoxystyryl)-9,9-bis(2-ethylhexyl)-9H-fluorene, has been synthesized, which is a D-pi-D symmetrical-type fluorene derivative. The two-photon absorption (TPA) of this new dye has been experimentally studied by comparable two-photon-induced fluorescence method. This new dye has a TPA cross-section of 84 x 10(-50) cm(4) s/photon at 790 nm/13 fs. (c) 2004 Elsevier GmbH. All rights reserved.

Phylogeny of higher taxa of Hexapoda according to 12sRNA sequences

The phylogenetic relationship of Hexapoda has been debated for a long time, which will be resolved mainly depending on the settlement of monophyly, affinities and interrelationships among Protura, Collembola and Diplura. Mitochondrial 12sRNA gene about 35

云南新平哀牢山夜间捕获鸟类的多样性

2007-09-05-2007-11-05和2008-09-03-2008-11-07期间,在云南省新平县哀牢山金山丫口用灯光诱捕对秋季夜间迁徙鸟类组成进行了调查.共捕获鸟类129种,7943只,分属于14日23科.雀形目鸟类为网捕主要鸟类,占总网捕数量的58.9%.其中红尾伯劳(Lanius cristatus)、小杜鹃(Cuculus poliocephalus)和红喉歌鸲(Luscinia calliope)3种是该地夜间网捕优势种鸟类,三者数量皆超过网捕岛类总数的5%.每天夜间20:00-22:00和次日凌晨04:00-4)6:00是捕获鸟类数最的高峰时段.网捕期间,早期Shannon-Wiener指数和Pielou指数最低,优势指数C最高;中期Shannon-Wiener指数和Pielou指数最高,优势度指数C最低.2008与2007年相比,优势指数C和G-F指数较低.但Shannon-Wiener指数和Pielou指数较高.云南省不同"打雀山"仪问捕获鸟类的种类和数量存在差异.地理和气候可能是造成这些差异的主要因素.

斑点叉尾鮰几种疑难疾病的介绍

<正>当前养殖斑点叉尾鮰在我国方兴未艾,然而,和其它养殖动物一样,随着养殖范围的扩大、养殖密度的提高以及养殖时间的延长,斑点叉尾鮰的疾病问题也随之接踵而来,并成为进一步发展的重要制约因素。本文介绍斑点叉尾鮰几种疑难疾病的主要特征,以帮助斑点叉尾鮰养殖业者能够在生产实践中尽早发现和认识它们,并采取正确的控制对策,减少因病造成的损失。

Feasibility of cyanobacterial inoculation for biological soil crusts formation in desert area

Practical testing of the feasibility of cyanobacterial inoculation to speed up the recovery of biological soil crusts in the field was conducted in this experiment. Results showed that cyanobacterial and algal cover climbed up to 48.5% and a total of 14 cyanobacterial and algal species were identified at the termination of inoculation experiment; biological crusts' thickness, compressive and chlorophyll a content increased with inoculation time among 3 years; moss species appeared in the second year; cyanobacterial inoculation increased organic carbon and total nitrogen of the soil; total salt, calcium carbonate and electrical conductivity in the soil also increased after inoculation. Diverse vascular plant communities composed of 10 and 9 species are established by cyanobacterial inoculation on the windward and leeward surface of the dunes, respectively, after 3 years. The Simpson index for the above two communities are 0.842 and 0.852, while the Shannon-Weiner index are 2.097 and 2.053, respectively. In conclusion, we suggest that cyanobacterial inoculation would be a suitable and effective technique to recover biological soil crusts, and may further restore the ecological system. (C) 2008 Published by Elsevier Ltd.

Use of microbial community to evaluate performance of a wetland system in treating Pb/Zn mine drainage

The performance of a wetland system in treating lead (Pb)/zinc (Zn) mine drainage was evaluated by using the polyurethane foam unit (PFU) microbial community (method), which has been adopted by China as a standardized procedure for monitoring water quality. The wetland system consisted of four cells with three dominant plants: Typha latifolia, Phragmites australis and Paspalum distichum. Physicochemical characteristics [pH, EC, content of total suspended solid (TSS) and metals (Pb, Zn, Cd, and Cu)] and PFU microbial community in water samples had been investigated from seven sampling sites. The results indicated that the concentrations of Pb, Zn, Cd, Cu, and TSS in the mine drainage were gradually reduced from the inlet to the outlet of the wetland system and 99%, 98%, 75%, 83%, and 68% of these metals and TSS respectively, had been reduced in concentration after the drainage passed through the wetland system. A total of 105 protozoan species were identified, the number of protozoa species and the diversity index (DI) gradually increased, while the heterotrophic index (HI) gradually decreased from the inlet to the outlet of the wetland system. The results indicated that DI, HI, and total number species of protozoa could be used as biological indicators indicating the improvement of water quality.

Impact of hydrogen dilution on microstructure and optoelectronic properties of silicon films deposited using tirisilane

We explored the deposition of hydrogenated amorphous silicon (a-Si: H) using trisilane (Si3H8) as a gas precursor in a radiofrequency plasma enhanced chemical vapour deposition process and studied the suitability of this material for photovoltaic applications. The impact of hydrogen dilution on the deposition rate and microstructure of the films is systematically examined. Materials deposited using trisilane are compared with that using disilane (Si2H6). It is found that when using Si3H8 as the gas precursor the deposition rate increases by a factor of similar to 1.5 for the same hydrogen dilution (R = [H-2]/[Si3H8] or [H-2]/[Si2H6])- Moreover, the structural transition from amorphous to nanocrystalline occurs at a higher hydrogen dilution level for Si3H8 and the transition is more gradual as compared with Si2H6 deposited films. Single-junction n-i-p a-Si: H solar cells were prepared with intrinsic layers deposited using Si3H8 or Si2H6. The dependence of open circuit voltage (V-oc) on hydrogen dilution was investigated. V-oc greater than 1 V can be obtained when the i-layers are deposited at a hydrogen dilution of 180 and 100 using Si3H8 and Si2H6, respectively.