Production of new superheavy Z=108-114 nuclei with U-238, Pu-244, and Cm-248,Cm-250 targets

Within the framework of the dinuclear system (DNS) model, production cross sections of new superheavy nuclei with charged numbers Z=108-114 are analyzed systematically. Possible combinations based on the actinide nuclides U-238, Pu-244, and Cm-248,Cm-250 with the optimal excitation energies and evaporation channels are pointed out to synthesize new isotopes that lie between the nuclides produced in the cold fusion reactions and the Ca-48-induced fusion reactions experimentally, which are feasible to be constructed experimentally. It is found that the production cross sections of superheavy nuclei decrease drastically with the charged numbers of compound nuclei. Larger mass asymmetries of the entrance channels enhance the cross sections in 2n-5n channels.

Validation of component assembly model and extension to plasticity

Material potential energy is well approximated by '' pair-functional '' potentials. During calculating potential energy, the orientational and volumetric components have been derived from pair potentials and embedding energy, respectively. Slip results in plastic deformation, and slip component has been proposed accordingly. Material is treated as a component assembly, and its elastic, plastic and damage properties are reflected by different components respectively. Material constitutive relations are formed by means of assembling these three kinds of components. Anisotropy has been incorporated intrinsically via the concept of component. Theoretical and numerical results indicate that this method has the capacity of reproducing some results satisfactorily, with the advantages of physical explicitness, etc. (c) 2007 Elsevier Ltd. All rights reserved.

关于相对论热力学中的温度变换

本文在评述了半个世纪以来关于温度相对论变换关系式的各种不同结果和争议后;论证了可逆过程中元功的表示式,给出了与Einstein类似的正确推导。文中指出了Eddington-Ott-Mφller观点和Landsberg观点的错误,并对Mφller模型进行了具体的修正,其结果仍与Planck-Einstein一致。

太阳日冕环的运动

<正> 几年以前天空实验室的观测已经发现太阳日冕中瞬变过程以环状形式发生质量喷射.在1973年5月到1974年1月观测期间,从天空实验室的白光日冕照像上,可以看

Molecular dynamics simulation of interaction of a dislocation array from a crack tip with grain boundaries

The interaction of a dislocation array emitted from a crack tip under mode II loading with asymmetric tilt grain boundaries (GBs) is analysed by the molecular dynamics method. The GBs can generally be described by planar and linear matching zones and unmatching zones. All GBs are observed to emit dislocations. The GBs migrated easily due to their planar and linear matching structure and asymmetrical type. The diffusion induced by stress concentration is found to promote the GB migration. The transmissions of dislocations are either along the matched plane or along another plane depending on tilt angle theta. Alternate processes of stress concentration and stress relaxation take place ahead of the pileup. The stress concentration can be released either by transmission of dislocations, by atom diffusion along GBs, or by migration of GBs by formation of twinning bands. The simulated results also unequivocally demonstrate two processes, i.e. asymmetrical GBs evolving into symmetrical ones and unmatching zones evolving into matching ones during the loading process.

天然气预处理和液化工艺技术的研究进展

调研了国内外天然气预处理和液化方面的最新文献,并对各种工艺技术进行了比较和分析.天然气预处理的工艺技术主要包括:酸性气体的脱除、水的脱除以及汞及重烃的脱除等;液化工艺流程主要有阶式制冷循环、混合制冷剂制冷循环、膨胀机制冷循环.各种液化方式都有自己的工艺特点.阶式制冷循环能耗最小,是目前天然气液化循环中效率最高的一种;混合制冷剂循环同阶式制冷循环相比,混合制冷液化循环具有流程简单、机组少、投资费用低、对制冷剂的纯度要求不高等优点;膨胀机循环能够较迅速和简单地启动和停工,但功耗较大.

第11届国际快淬和亚稳材料会议简介

第11届国际快淬和亚稳材料会议于2002年8月24~30日在英国牛津大学召开，本次会议由牛津大学材料系承办． 200多名来自欧洲、美国、加拿大、日本、韩国、印度、巴西、澳大利亚、新西兰、中国等29个国家的代表参加了本次大会．会议宣读口头报告244篇，张贴论文117篇，其中包括大会报告11篇，邀请报告31篇．会议论文经严格评审后由Materials Science and Engineering A杂志选择收录．下届会议将于2005年在韩国举行．

冲击载荷作用下容器壳体动态响应的初步数值研究

本文针对带椭球封头的爆炸容器,黑索今(RDX)在中心处的爆炸用点爆炸模型描述,利用四阶Runge-Kutta法求解一组常微分方程得到爆炸近场的自相似解。采用有限体积形式的PPM格式求解轴对称Euler方程,得到了容器内冲击波传播及其演化的图象。以计算得到的冲击载荷为基础,修改HONDO程序,壳体弹塑性模型采用J_2流动理论描述。对冲击波和壳体的耦合作用进行了初步的数值研究。计算结果表明:容器内爆炸冲击波和壳体中应力波的传播及其演化与物理上的定性分析结果是一致的。由于应力波传播速度较冲击波快,因此,在冲击波未到达的静止流场,流场出现扰动声波,并向中心传播。封头顶点附近出现最大变形。在中等载荷作用下,可忽略壳体变形对流场的影响。

Adiabatic shear localization: occurrence, theories, and applications

燃烧物理学基础

空气分级燃烧炉膛壁面温度分布研究

本文在1MW切向燃烧煤粉炉试验台上进行了空气分级燃烧试验，研究了空气分级燃烧时炉膛壁面温度分布规律。试验结果表明，在空气分级燃烧时主燃区壁面温度分布相对于炉壁中心位置呈左右不对称分布，炉壁最高温度大致出现在旋转气流的上游，壁面温度分布不均匀系数为0.244；燃尽区下部壁面温度分布也呈不对称分布，最高温度出现在旋转气流的下游，壁面温度分布不均匀系数为0.106；燃尽区上部壁面壁面温度分布分布均匀。

Polaronic correction to the first excited electronic energy level in an anisotropic semiconductor quantum dot

Within the framework of second-order Rayleigh-Schrodinger perturbation theory, the polaronic correction to the first excited state energy of an electron in an quantum dot with anisotropic parabolic confinements is presented. Compared with isotropic confinements, anisotropic confinements will make the degeneracy of the excited states to be totally or partly lifted. On the basis of a three-dimensional Frohlich's Hamiltonian with anisotropic confinements, the first excited state properties in two-dimensional quantum dots as well as quantum wells and wires can also be easily obtained by taking special limits. Calculations show that the first excited polaronic effect can be considerable in small quantum dots.

Enhanced dispersive wave generation by using chirped pulses in a microstructured fiber

A theoretical investigation on the nonlinear pulse propagation and dispersive wave generation in the anomalous dispersion region of a microstructured fiber is presented. By simulating the dispersive wave generation under different conditions. it is found that the generation mechanism of the dispersive wave is mainly due to the pulse trapping across the zero-dispersion wavelength. By varying the initial pulse chirp, the output spectrum can be broadened and the intensity of the dispersive wave can be obviously enhanced. In particular, there exists an optimal positive chirp which maximizes the intensity of the dispersive wave. This effect can be explained by the energy transfer from the Raman soliton to the dispersive wave due to the effect of the pulse trapping and the effect of the higher-order dispersion. From the phase aspect, the explanation of this effect is also included. (C) 2004 Elsevier B.V. All rights reserved.