330 resultados para 7 (2 hydroxyethyl)guanine

em Chinese Academy of Sciences Institutional Repositories Grid Portal


Relevância:

100.00% 100.00%

Publicador:

Resumo:

A simple, sensitive, and mild method for the determination of amino compounds based on a condensation reaction with fluorescence detection has been developed. 9-(2-Hydroxyethyl)acridone reacts with coupling agent N,N-carbonyldiimidazole at ambient temperature to form activated amide intermediate 9-(2-acridone)oxyethylcarbonylimidazole (AOCD). The amide intermediate (AOCD) preferably reacts with amino compounds under mild reactions in the presence of 4-(dimethylamino)pyridine (base catalyst) in acetonitrile to give the corresponding sensitively fluorescent derivatives with an excitation maximum lambda(ex) 404 mn and an emission maximum at lambda(em) 440 nm. The labeled derivatives exhibit high stability under reversed-phase conditions. The fluorescence intensities of derivatives in various solvents or at different temperatures were investigated. The method, in conjunction with a gradient elution, offers a baseline resolution of the common amine derivatives on a reversed-phase C-18 column. The LC separation for the derivatized amines shows good reproducibility with acetonitrile-water including 2.5% DMF as mobile phase. The relative standard deviations (n = 6) for each amine derivative are <4.5%. The detection limits (at a signal-to-noise ratio of 3) per injection were 0.16-12.8 ng/mL. Further research for the field of application, based on the AOCD amide intermediate as derivatization reagent, for the determination of free amines in real water samples is achieved.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Poly(ethylene oxide)-b-poly(2-hydroxyethyl methacrylate) (PEO-b-PHEMA) was synthesized by successive atom transfer radical polymerization (ATRP) of 2-hydroxyethyl methacrylate(HEMA) monomer using PEO-Br macroinitiator as initiator, CuBr/CuBr2 and 2,2.-bipyridyl (bpy) as catalyst and ligand. IR, H-1 NMR, and GPC analysis indicate that PEO-b-PHEMA block copolymer with low polydispersity index (M-w/M-n approximate to 1.1) has been formed. Self-assembly of this double hydrophilic block copolymer in the selective solvent and water was also studied. Owing to the high hydrophilic nature of the PEO and PHEMA blocks, this double hydrophilic block copolymer cannot disperse well in water. So block copolymer was modified by part esterification of PEO-b-PHEMA with acetic anhydride, which increased the hydrophobic group of the PHEMA block. The TEM results show that this block copolymer spontaneously form well-defined micelles in water.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Hollow porous poly(2-hydroxyethyl methacrylate-co-ethylene dimethacrylate)(HEMA-co-EDMA) spheres were prepared by emulsifier-free emulsion polymerization, swelling, seed emulsion polymerization and extraction. Then the spheres activated with 2,4,6-trichloro-1,3,5-triazine were functioned with adipohydrazide (AH). After periodate oxidation of its carbohydrate moieties, horseradish peroxidase was immobilized on the hydrazide-functionalized hollow porous poly(HEMA-co-EDMA) spheres. The amount of immobilized enzyme was up to 43.4 mu g of enzyme/g of support. Moreover, the immobilized horseradish peroxidase exhibited high activity and good stability.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

A four-level decay model in KMgF3:Eu2+ is proposed. The decay profiles of the P-6(7/2) excited state of Eu2+ are biexponential, and the physical implication of each term in the fit equation responsible for the model is interpreted. The evidence obtained spectroscopically for supporting the model is presented. A new method to study energy transfer between Eu2+ and X3+ in KMgF3:Eu-X (X = Gd, Ce, Cr) is established on the basis of the proposed model.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

A four-level model of P-6(7/2) excited state of Eu2+ ion in KMgF3: Eu2+ has been proposed. The decay profiles of the P-6(7/2) excited sstate of Eu2+ are two exponential and the physical implication of each term in the fit equation responsible for the model is interpreted. The data obtained spectroscopically are in good agreement with the fit results.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Energy transfer processes between Eu2+ and Gd3+, Cr3+, Ce3+ ions in KMgF3, which are difficult to study spectroscopically, have been investigated by using the proposed four-level decay model of the P-6(7/2) excited state of the Eu2+ ion. Gd3+ and Ce3+ transfer its energy to the vibronic transition of the P-6(7/2) --> S-8(7/2) transition of Eu2+, whereas Cr3+ receive energy from Eu2+ via the d-d interaction. The energy transfer from the Eu2+ 4f(6)5d level to the Ce3+ 4f5d state is observed spectroscopically, and the energy transfer mechanism is discussed. (C) 2001 Elsevier Science B.V. All rights reserved.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

A new blend of poly(2-hydroxyethyl methacrylate) (PHEMA) with poly (ethylene glycol) (PEG) was prepared. The results from solid-state NMR indicate that the PHEMA/PEG(88:12, w/w) blend is miscible on a molecular level.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The condensation and sulfonation of furfuryl alcohol (FA) and FA with tris (2-hydroxyethyl) isocyanurate (THEIC) and the crosslinking product structures were studied by means of solid-state C-13 NMR. The reaction of formalin with FA linear oligomer terminated by 2-methyl furan took place in the presence of the phase transfer catalyst (C4H9)4N+I-. The reaction of the terminated oligomer with a large amount of sulfuric acid as well as the former reaction was examined. The effects of some main reaction conditions on the crosslinking condensation and sulfonation were also discussed.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

A simple and sensitive method for the determination of short and long-chain fatty acids using high-performance liquid chromatography with fluorimetric detection has been developed. The fatty acids were derivatized to their corresponding esters with 9-(2-hydroxyethyl)-carbazole (HEC) in acetonitrile at 60 degreesC with 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide hydrochloride as a coupling agent in the presence of 4-dimethylaminopyridine (DMAP). A mixture of esters of C-1-C-20 fatty acids was completely separated within 38 min in conjunction with a gradient elution on a reversed-phase C-18 column. The maximum fluorescence emission for the derivatized fatty acids is at 365 nm (lambda (ex) 335 nm). Studies on derivatization conditions indicate that fatty acids react proceeded rapidly and smoothly with HEC in the presence of EDC and DMAP in acetonitrile to give the corresponding sensitively fluorescent derivatives. The application of this method to the analysis of long chain fatty acids in plasma is also investigated. The LC separation shows good selectivity and reproducibility for fatty acids derivatives. The R.S.D. (n = 6) for each fatty acid derivative are <4%. The detection limits are at 45-68 fmol levels for C-14-C-20 fatty acids and even lower levels for

Relevância:

100.00% 100.00%

Publicador:

Resumo:

全书以命令行方式通过大量教学实例和工程应用实例,介绍了建立模型、求解和结果后处理的全过程。

目 录

前言

第1篇教学实例篇

第1章简单拉压杆结构

1.1铰接杆在外力作用下的变形

1.2人字形屋架的静力分析

1.3超静定拉压杆的反力计算

1.4平行杆件与刚性梁连接的热应力问题

1.5端部有间隙的杆的热膨胀

第2章梁的弯曲问题

2.1等截面简单超静定梁的平面弯曲分析

2.2工字形截面外伸梁的平面弯曲

2.3矩形截面梁的纵横弯曲分析

2.4悬臂梁的双向弯曲

2.5 圆形截面悬臂杆的弯扭组合变形

2.6悬臂等强度梁的弯曲

2.7弹性地基半无限长梁在端部力和力偶作用下的变形

2.8偏心受压杆的大变形分析

第3章杆系稳定性计算

3.1利用梁单元计算压杆稳定性

3.2利用实体单元计算压杆稳定性

3.3悬臂压杆的过曲屈分析

3.4平面钢架的平面外失稳

第4章实体模型应力分析

4.1 均布荷载作用下深梁的变形和应力

4.2一对集中力作用下的圆环

4.3用实体单元分析变截面杆的拉伸

4.4用二维实体单元分析等截面悬臂梁的平面弯曲

4.5变截面悬臂梁在端部集中力作用下的平面静力分析

4.6纯弯曲悬臂曲梁的二维静力分析

4.7端部集中力作用的悬臂圆环曲梁平面弯曲的三维分析

4.8均匀拉力作用下含圆孔板的孔边应力集中

4.9两端固定的厚壁管道在自重作用下的变形和应力

第5章膜和薄壳问题

5.1含椭圆孔的椭圆薄膜在外部张力作用下的静力分析

5.2圆形薄膜大变形静力分析

5.3柱形容器在内压作用下的静力分析

5.4圆柱形薄壳在均匀内压作用下的静力分析

第6章板的弯曲和壳体计算

6.1简支和固支圆板的在不同荷载作用下的弯曲

6.2悬臂长板的大挠度弯曲

6.3用壳体单元分析受均布荷载作用的固支圆板大挠度弯曲

6.4利用拉伸操作建立膨胀弯管模型

6.5两端简支开口柱壳在自重作用下的静力分析

6.6圆筒在一对横向集中力作用下的变形

6.7两边简支开口柱壳在集中力作用下的大变形曲屈

7章简单振动系统

7.1单自由度弹簧质量系统的频率计算

7.2悬索自由振动的频率

7.3用弹簧单元连接的圆盘的扭转振动

7.4圆杆连接圆盘的扭转振动

7.5钻杆的扭转自由振动

第8章梁的振动分析

8.1简支梁的自振频率计算

8.2 自由―自由梁的纵向自由振动

8.3有轴向压力作用的简支梁的自由振动

8.4用壳体单元计算悬臂等强度梁的自由振动

8.5矩形截面薄壁悬臂梁的自由振动

第9章膜板和实体振动

9.1 圆形张紧薄膜的自由振动

9.2薄膜二维非轴对称自由振动分析

9.3薄膜三维非轴对称振动分析

9.4悬臂长板的自由振动频率

9.5悬臂宽板的模态分析

9.6固支圆板的自由振动

9.7用实体单元分析圆环的振动

9.8机翼模型的振动分析

第1 0章平面建模分析和三维实体建模

10.1 带三个圆孔的平面支座分析

10.2角支座应力分析

10.3 体斜支座的实体建模

10.4四分之一车轮的实体建模

10.5轴承支座的实体建模

第1 1章最优化设计

11.1概述

11.2最优化问题框架

11.3 ANSYS优化设计流程

11.4变截面悬臂梁的外形形状优化

11.5平面刚架的优化设计

第12章层合板和断裂力学

12.1 四边简支方形层合板在均布外载作用下的变形

12.2均布拉力作用下含裂纹板的应力强度因子计算

第2篇工程应用篇

第13章用APDL实现空间网壳结构参数化建模

13.1 K系列球面网壳结构的特点和建模

13.1.1 K系列球面网壳的特点

13.1.2几何描述

13.1.3杆件连接关系

13.2参数化设计语言APDL介绍

13.2.1参数和表达式

13.2.2 ANSYS 中的基本指令

13.2.3分支和循环

13.3用户界面设计语言UIDL介绍

13.3.1 单行参数输入

13.3.2多行参数输入

13.4网壳建模程序设计

13.4.1模型建立的步骤

13.4.2节点坐标计算

13.4.3单元连接

13.4.4变量说明

13.4.5节点坐标计算公式

13.4.6主框图说明

13.4.7单元连接关系定义

13.4.8源程序

13.5程序使用说明

13.5.1加载程序

13.5.2界面说明

13.5.3注意事项

13.6应用举例

13.6.1基本参数

13.6.2输入数据并生成模型

13.6.3输入单元参数和荷载后开始计算

13.6.4选择结果输出方式

第14章塔式起重机静动力分析

14.1塔式起重机基本概念

14.2塔式起重机拓扑模型

14.3塔机模型受力分析

14.3.1部件受力特征分析

14.3.2截面参数定义

14.3.3自重荷载和配重

14.3.4选用合适的分析模型。

14.3.5 固定塔身底部的4个节点

14.4塔机建模程序设计

14.4.1塔身节点计算和单元连接

14.4.2塔顶建模

14.4.3塔臂建模

14.4.4平衡臂和斜拉索建模

14.5塔机静力分析

14.6塔机模态分析

14.7塔机静动力分析程序

第15章长柱形天然气罐在内压作用下的静力分析

15.1概述

15.2建立模型

15.3利用轴对称壳单元SHELL51计算

15.3.1单元基本性质和约定

15.3.2求解过程

15.3.3源程序

15.3.4计算结果

15.3.5简体部分理论解

15.3.6结果讨论

15.4利用8节点2D实体单元PLANE82单元计算

15.4.1建立模型

15.4.2计算过程

15.4.3计算结果及讨论

15.4.4源程序

15.5用20节点3D实体单元solid95计算1/4模型

15.5.1建立1/4三维模型

15.5.2计算步骤

15.5.3计算结果分析

15.5.4与弹性力学解答的对比

15.5.5计算程序

附录

附录A常用结构单元参考

附录B结构分析命令速查

参考文献

Relevância:

100.00% 100.00%

Publicador:

Resumo:

We report on the conversion of near-ultraviolet radiation of 250-350 nm into near-infrared emission of 970-1100 nm in Yb3+-doped transparent glass ceramics containing Ba2TiSi2O8 nanocrystals due to the energy transfer from the silicon-oxygen-related defects to Yb3+ ions. Efficient Yb3+ emission (F-2(5/2)-> F-2(7/2)) was detected under the excitation of defects absorption at 314 nm. The occurrence of energy transfer is proven by both steady state and time-resolved emission spectra, respectively, at 15 K. The Yb2O3 concentration dependent energy transfer efficiency has also been evaluated, and the maximum value is 65% for 8 mol % Yb2O3 doped glass ceramic. These materials are promising for the enhancement of photovoltaic conversion efficiency of silicon solar cells via spectra modification.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

<正> 在前文的基础上,用~(59)CO~2+Cl_2·6H_2O加D_2O作为样品,在200MHz谱仪上观察~1H,在400MHz谱仪上观察~(35)Cl,研究强顺磁离子~(59)Co~2+(s=3/2,I=7/2)在外加直流磁场H_0作用下,它对~1H与~(35)Cl的NMR影响。因为强顺磁离子~(59)Co~(2+)的电子自旋(s=3/2)是围绕着核旋转的,因此可以统计平均计算,

Relevância:

100.00% 100.00%

Publicador:

Resumo:

1-甲基-2-甲氧羰基-3, 6, 8-三羟基-7-甲氧基蒽醌是从唐菖蒲干球茎中分离到的具有环氧化酶-2选择性抑制活性的多取代蒽醌类化合物。本文试图合成该化合物,实现了其类似物的合成,同时发现了几个未见报道的反应。 1.通过Diels-Alder 反应合成了关键中间体——3-甲基-5-羟基-1, 2, 4-苯三甲酸三甲酯,1-COOMe选择性水解产物与1, 2, 3-三甲氧基苯进行分子间Friedel-Crafts反应的产物再进行分子内Friedel-Crafts反应得到了目标产物的类似物1-甲基-2-甲氧羰基-3-羟基-6,7,8-三甲氧基蒽醌(路线1)。目标产物及其它类似物的合成正在进行中。 2.以乙酰乙酸甲酯和巴豆醛为原料,经过Michael加成、分子内的Aldol反应、芳香化、选择性甲酰化和还原反应,得到关键中间体2-甲基-3-羟甲基-6-甲氧基苯甲酸甲酯及其衍生物。通过该化合物与3,4,5-三甲氧基苯甲酸甲酯进行Friedel-Crafts烷基化反应得到了多取代的二苯基甲烷衍生物,拟进一步关环合成目标化合物(路线2)。 3.发现邻甲氧基苯甲酸甲酯中酯甲基可以被正丁基锂和仲丁基锂中烷基交换生成相应的酯,反应的机理不明确。当使用叔丁基锂时,得到的是邻甲氧基苯基叔丁酮,这个方法可以用来合成芳基叔丁酮类化合物。 4.以2-苄氧基-6-甲基苯甲酸甲酯为原料进行氯甲基化反应时,以苯和二氯乙烷作溶剂,发生了苄基的迁移和芳环的偶联,分别得到2,2'-二甲基-3,3'-二甲氧羰基-4,4'-二羟基联苯和2,2'-二甲基-3,3'-二甲氧羰基-4,4'-二羟基-5,5'-二苄基联苯。这是对称联苯合成的新方法。 5.水杨酸羟基邻对位的选择性甲酰化可以分别通过水杨酸和水杨酸甲酯用HMTA/CF3COOH来实现。 6.Lewis酸催化3,4,5-三甲氧基苄醇环化成1, 2, 3, 6, 7, 8, 11, 12, 13-nonamethoxyl-10,15-dihydro-5H-trbibenzo [a, d, g] cyclononene (NDTC),产率(54%)高于已有方法(12%)。 Methyl 3,6,8-trihydroxy-7-methoxy-1-methylanthraquinone-2-carboxylate is a new COX-2 selective inhibitor isolated from Gladiolus gandavensis. Two strategies were investigated to synthesis this compound, in which some important reactions were discovered. 1. The key intermediate 5-hydroxy-3-methylbenzene-1,2,4-tricarboxylic acid 2,4-dimethyl ester was prepared via Diels-Alder reaction followed by selective hydrolysis of 1-COOMe. This compound was coupled with 1,2,3-trimethoxybenzene and the product undergo intramolecular Friedel-Crafts reaction to give methyl 3-hydroxy-5,6,7-trimethoxy-1-methylanthraquinone-2-carboxylate (1st route). The target compound and other analogues are being prepared with the same procedure. 2. The key intermediates methyl 3-hydroxymethyl-6-methoxy-2-methylbenzoate and its derivatives were prepared starting from crotonaldehyde and methyl acetoacetate via Michael addition, intramolecular aldol reaction, aromatization, formylation and reduction. The intermediates were coupled respectively with derivatives of gallic acid to give polysubstituted diphenylmethane. However, attempts to cyclize these compounds to the target compounds and analogues were not successful (2nd route). 3. In the process for ortho-lithiation of methyl 2-methoxybenzoate, the substrate converted respectively to n-butyl 2-methoxybenzoate and sec-butyl 2-methoxybenzoate when n-BuLi and sec-BuLi were used. However, tert-BuLi reacted with methyl 2-methoxybenzoate afford 2-methoxyphenyl tert-butyl ketone, which could be used to synthesize aryl tert-butyl ketones. 4. The transformtion of methyl 2-benzoxy-6-methylbenzoate to dimethyl 4,4'-dihydroxy-2,2'-dimethylbiphenyl-3,3'-dicarboxylate in benzene, and dimethyl 5,5'-dibenzyl-4,4'-dihydroxy-2,2'-dimethylbiphenyl-3,3'-dicarboxylate in 1,2-dichloroethane in the presence of ZnCl2 provides a new method for the synthesis of symmetric biphenyl. 5. The formylation of salicylic acid at C-5 and methyl 2-hydroxybenzoate at C-3 could be regioselectively realized by using HMTA/CF3COOH. 6. Racemic 1, 2, 3, 6, 7, 8, 11, 12, 13-nonamethoxyl-10, 15-dihydro-5H-trbibenzo [a, d, g] cyclononene was prepared via Lewis acids catalyzed trimerization of 3, 4, 5-trimethoxylbenzyl alcohol with yield (54%) higher than the reported procesure (12%).

Relevância:

100.00% 100.00%

Publicador:

Resumo:

利用重离子熔合蒸发反应和在束γ谱学实验方法 ,研究了双奇核184 Au的高自旋态能级结构 .扩展了基于πh9/ 2 ν7/ 2 - [5 14 ]和πi13/ 2 νi13/ 2 2准粒子组态下的转动带能级纲图 ,建立了两个转动带之间以及πh9/ 2 ν7/ 2 - [5 14 ]带与基态的谱学连接 .从而确定了πi13/ 2 νi13/ 2 带能级的自旋和宇称 ,证实了此转动带在低自旋区出现旋称反转 .分析了πi13/ 2 νi13/ 2 带和相邻核转动带的准粒子顺排特征 ,指出此带的第一回弯以及相邻核转动带在低频观测到的顺排异常可能与h9/ 2 质子顺排有关 .