Study on Post Foundation of Highway Medium Guardrail

目前高速公路中央分隔带波形梁护栏立柱的实际设置中,普遍存在着由于分隔带地基强度低于压实路基,护栏立柱承载能力偏低,护栏的防护性能达不到设计要求的问题。对粘性土地基中立柱的受力情况进行了分析,并对地基为压实土与回填土两种情况进行了对比,给出了中央分隔带中立柱地基的加固方案。

Mixing process in estuaries

A theoretical expression for vertical profile-of horizontal velocity in terms of its depth-average is derived based on oscillatory boundary layer theory and estuarine flow characteristics. The derived theoretical profile is then incorporated into a vertical quasi-two-dimensional model, which is proved advantageous in more physical implications and less CPU time demand. To validate the proposed model, the calculated results are compared to the field data in the Yangtze River Estuary, exhibiting good agreement with observations. The proposed quasi-two-dimensional vertical model is used to study mixing process, especially dependence of salinity distribution and salt front strength on runoff and tides in estuaries.

Electrochemical Impedance Spectroscopy Of Peo Coating On Aluminum Alloy In Nacl Solution

Various Plasma Electrolytic Oxidation (PEO) ceramic coatings were prepared on LY12 aluminum alloy by adjusting the concentration of sodium silicate solution. Optical microscope (OM), XRD and EIS were used to study their morphology, composition and anti corrosion behavior in NaCl solution. Increasing concentration of sodium silicate leads to the increase of the total coating thickness while too high and too low concentration lead to the decrease of inner dense layer. The main composition of PEO coatings prepared in 20, 40 and above 60g/L concentration solution are correspondingly alumina, alumina with mullite, and amorphous phase. The corrosion resistance is determined by the inner dense layer. Increasing the thickness of inner dense layer can improve the anti-corrosion performance. PEO coating's corrosion resistance in acidic, alkaline and neutral NaCl solution is proved and the corrosion mechanism involved is also discussed.

液桥中不同Prandtl数流体的热毛细对流

本文研究从上面加热的液桥中不同 pr 数流体的热表面张力驱动对流。在 Ma 数相同的条件下,不同 pr 数流体液桥中的温度分布和流场结构定性相似,但定量结果不同。小pr数(pr<<1)流体液桥中的粘性边界层远小于热边界层,最大流函数所在位置向冷端偏移,有较大的流动速度。结果表明,Ma 数是描述这种流动的敏感参数。

有涨落效应的磁流体静力学关系

观测表明,在许多天体物理环境中,涨落场具有不可忽略的重要作用.本文在一阶光滑近似条件下,推导了普通湍流和随机波动两种条件下的磁流体静力学方程组,以及这些方程所要求的自洽性条件.在静力学问题中,涨落的洛伦茨力会对大尺度磁场位形有影响.具体研究这种影响对于解释观测的特征是十分必要的,特别是许多天体物理环境中,磁场(包括涨落磁场δB)是决定能量和动量平衡的重要因素.

正交设计在疲劳试验中的应用

<正> 引言到目前为止,疲劳的机理和基本理论(包括累积损伤理论、裂纹扩展理论、剩余强度理论等)仍然没有得到解决,主要是靠实验来解决问题。但是,进行疲劳试验,存在许多实际的问题。首先,影响疲劳强度的因素很多,比如试件的形状和尺寸、试件表面状况、应力集中、热处

基于红外热象技术的金属材料疲劳性能研究方法

金属材料的疲劳极限或疲劳寿命等性能是长寿命机械和结构抗疲劳设计的基本数据,探讨效率高、成本低而又准确的试验新方法,成为相关研究者十分感兴趣的课题。材料在循环载荷作用下产生的塑性变形经不断累积会引起疲劳破坏,这个过程所耗的塑性功绝大部分以热量形式耗散,因此寻找热耗散温度变化过程与疲劳极限及寿命之间的关系很有意义。就此问题,文中引入利用先进的红外热成象技术确定金属材料疲劳性能的试验研究方法,主要从原理和试验方法两方面进行介绍,并对45钢的试验过程和现象作较为详细地阐述,得到较准确的疲劳极限值和基于红外热象技术确定疲劳寿命的重要参量M。

铝合金表面等离子体电解氧化陶瓷涂层在NaCl溶液中的电化学阻抗谱研究

通过调整电解液中硅酸钠的浓度，利用等离子体电解氧化（PEO）技术在铝合金LY12表面制备了各种陶瓷涂层，利用光学显微镜、XRD、电化学阻抗谱（EIS）对涂层的形貌、成分和涂层在NaCl溶液中耐腐蚀性能进行了研究．结果表明：提高电解液中硅酸钠的浓度可以使得涂层的总厚度增加，但过高或过低的浓度都会导致致密层厚度的减薄．当浓度为20g／L时，所制备的涂层的成分以氧化铝为主；当浓度为40g／L时，涂层的成分主要是莫来石和氧化铝；当浓度超过60g／L时，涂层的成分主要为非晶相．EIS的研究表明，涂层耐腐蚀性取决于涂层中的致密层，增加致密层的厚度可以提高PEO涂层的耐腐蚀性，在中性、酸性、碱性腐蚀介质中，PEO涂层都显示出对基体良好的保护作用．

模拟弹塑性碰撞的修正SPH方法

从基本的无网格光滑粒子法SPH(Smoothed Particle Hydrodynamics)近似出发,修正了模拟固体力学中大变形弹塑性碰撞的SPH方法.在边界处采用修正的边界条件,弹塑性分析过程中采用增量理论计算应力,迭代过程中用守恒光滑法进行滤波修正消除拉力不稳定.对SPH方法进行了程序实现,给出了杆弹塑性碰撞的算例.计算分析表明,SPH方法节点的影响域较大、精度较相同节点间距有限元法的结果有一定差距,但是通过增加粒子数量可以提高SPH的精度,保持了其简单性和计算大变形的特性.

助推-远程滑翔三维飞行的热流峰值分析

为简便分析助推-远程滑翔弹道三维情况下的热流特性,基于远程滑翔三维飞行动力学模型和热力学基本公式,根据助推-远程滑翔弹道的两类飞行弹道（平衡滑翔弹道和跳跃滑翔弹道）的特点,推导建立了两类弹道三维情况下平均热流和驻点热流计算的解析公式。详尽分析了再入角、再入速度、升阻比、滚转角和翼载荷对两类弹道热流峰值的影响规律。由分析可知在远程滑翔三维飞行情况下,滚转角对其热流峰值有显著影响;升阻比大于1,滚转角控制在60度以内,其热流峰值能够得到有效降低。

Laser-driven inertial ion focusing

A Hohlraum-like configuration is proposed for realizing a simple compact source for neutrons. A laser pulse enters a tiny thin-shelled hollow-sphere target through a small opening and is self-consistently trapped in the cavity. The electrons in the inner shell-wall region are expelled by the light pressure. The resulting space-charge field compresses the local ions into a thin layer that becomes strongly heated. An inward expansion of ions into the shell cavity then occurs, resulting in the formation at the cavity center of a hot spot of ions at high density and temperature, similar to that in inertial electrostatic confinement.

Compression of intense laser pulse through filamentation in an argon-filled cell

We demonstrate a pulse compression technique through filamentation in an argon-filled cell. By using a pair of chirped mirrors for dispersion compensation, we have successfully compressed the 53 fs pulse to 15 fs with good spatial qualities and good pulse stability. The total transmitted efficiency is more than 75%. The influence of the experiment parameters to the compressed pulses is also studied experimentally.

Calculations of bond dissociation energies and dipole moments in energetic materials using density-functional methods

We compare the effectiveness of six exchange/correlation functional combinations (Becke/Lee, Yang and Parr; Becke-3/Lee, Yang and Parr; Becke/Perdew-Wang 91; Becke-3/Perdew-Wang 91; Becke/Perdew 86; Becke-3/Perdew 86) for computing C-N, O-O and N-NO2 dissociation energies and dipole moments of five compounds. The studied compounds are hexabydro-1,3,5-trinitro-1,3,5-triazine (RDX), dimethylnitramine, cyanogen, nitromethane and ozone. The Becke-3/Perdew 86 in conjunction with 6-31G