164 resultados para 5-amino-1,3,4-thiadiazole-2-thiol modified silica gel
em Chinese Academy of Sciences Institutional Repositories Grid Portal
Resumo:
Electrochemical polymerized polyaniline(PAn) film electrode was used to investigate the electrocatalytic effect of PAn on the electrochemical redox reaction of 2,5-dimercapto-1,3,4-thiadiazole (DMcT), PAn film electrode was electrochemically treated or immersed in DMcT solution before it was scanned in 1.0 mol/L HCl electrolyte. The cyclic voltammograms of PAn film electrode in 1.0 mol/L HCl solution changed with the above treatment, implying the electrocatalytic effect of PAn on the redox reaction of DMcT, The formation of electron-donor-acceptor adducts through the interaction between thiol or disulfide groups of DMcT and amine or imine groups of PAn during the treatment was probably the reason of the catalysis, The electrochemical properties of the adduct were different from those of PAn and DMcT, The adduct possessed a higher electrochemical activity and a better electrochemical reversibility than DMcT or PAn used alone.
Resumo:
The interaction between polyaniline (PAn) and 2,5-dimercapto-1,3,4-thiadiazole (DMcT) was investigated by means of cyclic voltammetry and UV-visible spectroscopy. The results show that the polymerization-depolymerization reaction of DMcT or its dilithium salt Li(2)DMcT is a kinetically quasi-reversible process. PAn exhibits very weak electrochemical activity in neutral propylene carbonate. After doping with protonic acid, such as hydrochloric acid or maleic acid etc., however, it shows an extensively enhanced electroactivity. For the complex system, PAn-DMcT or PAn-Li(2)DMcT, polyaniline has no catalytic activity for the electrochemical polymerization-depolymerization reaction of DMcT or DMcT(2-). Instead, the enhancement of the electrochemical redox activity of PAn-DMcT system compared with that of PAn, DMcT, Li(2)DMcT, and PAn-Li(2)DMcT comes from the protonic doping of PAn by DMcT.
Resumo:
A poly(o-toluidine) (POT)/2,5-dimercapto-1,3,4-thiadiazole (DMcT) composite was prepared. When POT and DMcT are mixed in a proper solvent, POT in a medium-oxidation state is reduced, and DMcT in turn is oxidized to its soluble dimer when the molar ratio of DMcT to POT is higher than 0.5. Therefore, the composite was soluble in organic solvents such as tetrahydrofuran (THF), dimethylformamide (DMF), and N-methyl-2-pyrrolidone (NMP) and exhibited very high electroactivity, two orders of magnitude higher than that of pure POT and three orders of magnitude higher than that of pure DMcT. Molecular-level contact between POT and DMcT is the reason for the improved catalytic effect of POT on DMcT, compared to that of polyaniline on DMcT. (C) 1999 The Electrochemical Society. S0013-4651(98)08-059-8. All rights reserved.
Resumo:
2-(2-Hydroxyphenyl)-5-phenyl-1,3,4-oxadiazole 1 and 2,5-bis(2-hydroxyphenyl)-1,3,4-oxadiazole 2 were used as anion fluorescent and colorimetric chemosensors with high selectivity for H2PO4- and F- over Cl-, while 2 can even distinguish H2PO4- from F-. (C) 2002 Elsevier Science Ltd. All rights reserved.
Resumo:
研究了聚苯胺 ( PAn)膜电极在 2 ,5-二巯基 -1 ,3 ,4 -噻二唑 ( DMc T)溶液中电化学处理或浸泡后的循环伏安 ( CV)曲线的变化规律 .实验结果表明 ,PAn膜电极在 DMc T溶液中进行电化学处理或浸泡过程可使DMc T进入 PAn膜内部与 PAn形成复合物 .PAn对 DMc T的电化学催化作用可能和二者之间形成的电子给体 -受体复合物有关 .该复合物的电化学氧化还原特性不同于 PAn和 DMc T,其氧化还原反应速率和可逆性均优于 DMc T
Resumo:
Chitosan (CS) with two different molecular weights was modified by reacting with 4-hydroxyl-5-chloride-1,3-benzene-disulfo-chloride or 2-hydroxyl-5-chloride-1,3-benzene-disulfo-chloride to give new 2-(4(or 2)-hydroxyl-5-chloride-1,3-benzene-di-sulfanimide)-chitosan (2-HCBSAHCS, 2-HCBSALCS, 4-HCBSAHCS, 4-HCBSALCS). The structure of the derivatives was characterized by FT-IR and C-13 NMR spectroscopy. The antioxidant activities of the derivatives were investigated employing various established systems, such as hydroxyl radical ((OH)-O-center dot)/superoxide anion (O-2(radical anion)) scavenging/reducing power and chelating activity. All the derivatives showed stronger scavenging activity on hydroxyl radical than chitosan and ascorbic acid (Vc), and IC50 of 4-HCBSAHCS, 4-HCBSALCS, 2-HCBSAHCS and 2-HCBSALCS was 0.334, 0.302, 0.442, 0.346 mg/mL, respectively. The inhibitory activities of the derivatives toward superoxide radical by the PMS-NADH system were strong. The results showed that the superoxide radical scavenging effect of 2-(4(or 2)-hydroxyl-5-chloride-1,3-benzene-disulfanimide)-chitosan was higher than chitosan. The derivatives had obviously reducing power and slight chelating activity. The data obtained in in vitro models clearly establish the antioxidant potency of 2-(4(or 2)-hydroxyl-5-chloride-1,3-benzene-disulfanimide)-chitosan. (C) 2007 Elsevier Masson SAS. All rights reserved.
Resumo:
本文研究了以PMBP-苯萃取稀土和钍、铀、钛、锆的萃取行为。测定了La、Ce、Pr、Nd、Sm、Gd、Dy、Yb、Y、U(Ⅵ)、Ti、Th和Zr的pH_(1/2)值,计算了它们的萃取平衡常数。并介绍了近十年来作者将此萃取剂应用于铀、钍、稀土、鋰、钢铁合金及岩石中痕量稀土、钍和钙的分离和测定方面的工作。实践证明,PMOP合成简便、价格低廉、萃取能力较强,是比TTA更为优越的萃取剂。
Resumo:
研究了 1 苯基 3 甲基 4 苯甲酰基 -吡唑酮 5 (HPMBP)和中性有机磷 (膦 )类萃取剂Cyanex 4 71X(TIBPS ,B)在硝酸介质中对稀土元素La 的萃取 ,用斜率法和恒摩尔法探讨了萃取机理 ,确定了萃合物的组成为La(NO3 ) 2 ·PMBP·B ,计算了萃取平衡常数。比较了HPMBP与Cyanex 4 71X、Cyanex 92 1、Cyanex 92 3、Cyanex 92 5、DEH/EHP、P35 0及TBP的单独及混合体系萃取La 的性能 ,结果表明 :所有混合体系对La 均有协同效应 ,其中HPMBP与Cyanex 92 3、Cyanex 92 1、Cyanex 92 5的混合体系是萃取La 的有效体系。
Resumo:
Two new hydrazone chelating ligands, 2-(2-(5-methylisoxazol-3-yl)hydrazono)-5,5-dimethylcyclohexane-1,3-dione (HL1) and 2-(2-(5-tert-butylisoxazol-3-yl)hydrazono)-5,5-dimethylcyclohexane- 1,3-dione (HL2), and their nickel(II) and copper(II) complexes were synthesized using the procedure of diazotization, coupling and metallization. Their structures were postulated based on elemental analysis, H-1 NMR, ESI-MS, FT-IR spectra and UV-vis electronic absorption spectra. Smooth films of these complexes on K9 glass substrates were prepared using spin-coating and their absorption properties were evaluated. The thermal properties of the metal(II) complexes were investigated by thermogravimetry (TG) and differential thermogravimetry (DTG). Different thermodynamic and kinetic parameters namely activation energy (E
Resumo:
用1-苯基-3-甲基-4-苯甲酰基-5-吡唑啉酮(PMBP)做萃取剂,氯仿和环己烷为稀释剂,观察了在HCl溶液46Sc的溶剂萃取行为。实验结果表明,从10-3~10-2mol/L的HCl溶液中用PMBP-氯仿(或环己烷)能有效地萃取46Sc,萃取率可达95%以上。另外,对PMBP从HCl溶液中萃取46Sc和234Th的结果也做了比较,结果表明,通过控制水溶液中HCl的浓度,能实现234Th与46Sc的分离。
Resumo:
用1-苯基-3-甲基-4-苯甲酰基-5-吡唑啉酮(PMBP)为萃取剂,苯为稀释剂,从pH5的水相中萃取船224Ra,发现224Ra的萃取效率非常低。若往PMBP中加入少量的磷酸三丁脂(TBP),则会极大地提高镭的萃取效率,这说明TBP对PMBP萃取镭有显著的协同萃取效应。完成了萃取时间和反萃时间对224Ra萃取效率的影响以及224Ra萃取效率与TBP量之间的依赖关系等条件实验。
Resumo:
用1-苯基-3-甲基-4-苯甲酰基-5-吡唑啉酮(PMBP)做萃取剂研究了从HNO_3介质中痕量钪的溶剂萃取行为。发现在很低的酸度下,PMBP几乎可以定量地萃取痕量的钪。同时,也讨论了用PMBP从~(18)O离子辐照过的铀靶溶液中萃取分离钍时钪的沾污。
Resumo:
在用PMBP(1 苯基 3 甲基 4 苯甲酰基 5 吡唑啉酮 )从 14MeV中子照射过的天然U靶溶液中萃取Th流程的基础上 ,将萃取介质改为HNO3溶液 ,并将单次萃取 反萃改为两次萃取 反萃 ;在反萃溶液中加入I- 载体和NaNO2溶液 ,在Fe(OH) 3沉淀溶液中加入Br- 载体。用改进后的流程从 6 0MeV/u18O离子轰击天然U的HNO3溶液中分离Th ,从制得的Th样品的γ射线谱可以看出 ,该流程能去除绝大部分产物元素 ,特别是能完全去除溴和碘
Resumo:
用1-苯基-3-甲基-4-苯甲酰基-5-吡唑啉酮(PMBP)为萃取剂,~(234)Th作示踪剂,完成了在硝酸介质中痕量钍溶剂萃取行为的研究。在~(234)Th萃取效率与酸度、萃取剂浓度、平衡时间等依赖关系的条件实验的基础上,获得了萃取钍的最佳条件。使用改进的PMBP萃取钍的流程,从~(18)O离子辐照过的铀靶中分离钍,钍样品的γ射线单谱显示绝大部分反应产物和大量铀的去除是满意的。
Resumo:
Four new iridium(III) complexes 1-4, with 1,3,4-oxadiazole derivative as cyclometalated ligand for the first time, have been synthesized and structurally characterized by NMR, EA, MS and X-ray diffraction analysis (except 1). The stronger ligand field strength of the dithiolate ancillary ligands results in higher oxidation potentials and lower HOMO energy levels of complexes than acetylacetone. The absorption spectra of these complexes display low-energy metal-to-ligand charge transfer transition ranging from 350 to 500 nm. Complexes with dithiolate ancillary ligand emit at maximum wavelengths of ca. 500 nm, blue shifting 17 and 11 nm with respect to their counterpart with acetylacetone ligand. The electrophosphorescent devices with 2-4 as phosphorescent dopant in emitting layer have been fabricated. All devices have a low turn-on voltage in the range of 4.5 and 4.9 V. A high-efficiency green emission with maximum luminous efficiency of 5.28 cd/A at current density of 1.37 mA/cm(2) and a maximum brightness of 2592 cd/m(2) at 15.2 V has been achieved in device using 2 as emitter.