海马突触可塑性与异常记忆

5-羟色胺(5-HT)是中枢神经系统内非常重要的神经递质，广泛参与各种行为和生理过程。5-羟色胺功能低下可导致多种精神类疾病尤其是焦虑、抑郁和创伤后应激障碍等，而这些疾病都伴有学习和记忆的障碍；海马是参与学习记忆的重要脑区。海马接受5-HT神经元的直接投射且富含5-HT受体，因而海马也可以通过5-HT系统调控焦虑、抑郁及学习记忆。海马突触可塑性是学习记忆的细胞分子机制，是学习记忆的基础。我们条件性敲除转录因子Lmx1b得到中枢5-HT缺失小鼠，利用该小鼠进行中枢神经系统5-HT功能的研究。我们发现该小鼠的脑结构和运动能力正常；水迷宫空间学习能力正常，但空间记忆受损；焦虑水平降低，但是环境恐惧学习和记忆能力增强，增强的恐惧记忆能被外源给予的5-HT逆转；在中枢5-HT缺失小鼠中，应激对海马可塑性的作用即损伤LTP易化LTD消失，外源给予5-HT可以恢复应激的效果。这些结果提示应激导致海马LTP损伤可能是保护机制，缺乏这种保护机制可能导致恐惧记忆相关的创伤后应激障碍(PTSD)的易感。成瘾的核心特征是对药物的强迫性渴求和复吸。成瘾与学习记忆有很多共同的脑区和分子通路，它可能通过篡夺正常生理神经通路而产生比正常生理反应更强烈的可塑性，形成有害的异常记忆。以前的报道证实海马的兴奋性突触可塑性在成瘾过程中的适应性改变可能是成瘾的机制；但是成瘾涉及复杂的生物机制，因而不可能仅是兴奋性突触可塑性的贡献。我们研究了5-HT系统和抑制性系统（主要是GABA能系统）在成瘾中的贡献。利用中枢5-HT缺失小鼠，我们发现5-HT缺失小鼠的吗啡显著地易化了5-HT CKO的海马LTP，同时也导致成瘾行为持续不消退；5-HT和5-HT1a受体激动剂能逆转此现象。这提示毒品成瘾可能导致中枢5-HT缺失，进而增强海马LTP，使毒品相关记忆牢固不消退。GABA能系统是中枢神经系统最重要的抑制性系统，我们研究发现一次吗啡对内源性大麻受体（CB1R）依赖的抑制性突触的长时程抑制（Inhibitory long-term depression，I-LTD）没有影响，成瘾后I-LTD抑制，而吗啡成瘾后戒断导致了内源性大麻受体(CB1R)和L-型钙通道(LTCC)依赖的GABA能LTD (I-LTD)，使I-LTD增大了一倍，提示在吗啡成瘾阶段过程中，有组合突触可塑性发生，进而增强了突触可塑性的调控范围。 本论文是对中枢5-HT系统对海马兴奋性突触可塑性在焦虑、应激、成瘾等异常记忆中的调节作用以及海马抑制性系统在成瘾和戒断中的贡献进行研究，表明恐惧记忆和毒品成瘾记忆存在许多共同的细胞分子机理，对今后治疗焦虑、创伤后应激障碍和成瘾提供了新的思路。

Nd65Al10Fe25-xCox (x=0,5,10) bulk metallic glasses with wide supercooled liquid regions

Bulk metallic glasses of Nd65Al10Fe25-xCox (x=0,5,10) have been prepared in the form of 3 mm diam rods. Results of differential scanning calrimetry, dynamic mechanical thermal analysis (DMTA), and x-ray diffraction are presented for these alloys. It is shown that the glass transition and crystallization have been observed by DMTA. The reduced glass transition temperature of these glasses, defined as the ratio between the glass transition temperature T-g and the melting temperature T-l is in the range from 0.55 to 0.62. All these glasses have a large supercooled liquid region (SLR), ranging from 80 to 130 K. The high value of reduced glass transition temperature and wide SLR agree with their good glass formation ability.

Comparative Study Of The Influence Of Natural Convection On Directional Solidification Of Al-3.5 Wt% Ni And Al-7 Wt% Si Alloys

We present numerical simulations of thermosolutal convection for directional solidification of Al-3.5 wt% Ni and Al-7 wt% Si. Numerical results predict that fragmentation of dendrite arms resulting from dissolution could be favored in Al-7 wt% Si, but not in Al-3.5 wt% Ni. Corresponding experiments are in qualitative agreement with the numerical predictions. Distinguishing the two fragmentation mechanisms, namely dissolution and remelting, is critical during experiments on earth, when fluid flow is dominant. (C) 2007 COSPAR. Published by Elsevier Ltd. All rights reserved.

标量脉动“能量”传递函数与—5/3次方律

本文在Heisenberg关于速度脉动能量传递函数假设的基础上,提出标量脉动“能量”传递函数的相应形式.讨论了具有常值横向平均速度梯度与标量梯度的均匀湍流流场中关于大波数情形的标量脉动“能”谱性质。

以1-苯基-3-甲基-4-苯甲酰基代吡唑酮[5]萃取稀土和钍铀钛锆及其在分析化学中的某些应用

本文研究了以PMBP-苯萃取稀土和钍、铀、钛、锆的萃取行为。测定了La、Ce、Pr、Nd、Sm、Gd、Dy、Yb、Y、U(Ⅵ)、Ti、Th和Zr的pH_(1/2)值,计算了它们的萃取平衡常数。并介绍了近十年来作者将此萃取剂应用于铀、钍、稀土、鋰、钢铁合金及岩石中痕量稀土、钍和钙的分离和测定方面的工作。实践证明,PMOP合成简便、价格低廉、萃取能力较强,是比TTA更为优越的萃取剂。

Digitized Processing Track Generation of a Computer Integrated Multi-Functional 5-Axis Laser Processing System

Based on the computer integrated and flexible laser processing system, an intelligent measuring sub-system was developed. A novel model has been built up to compensate the deviations of the main frame-structure, and a new 3-D laser tracker system is applied to adjust the accuracy of the system. To analyze the characteristic of all kind surfaces of automobile outer penal moulds and dies, classification of types of the surface、brim and ridge(or vale) area to be measured and processed has been established, resulting in one of the main processing functions of the laser processing system. According to different type of surfaces, a 2-D adaptive measuring method based on B?zier curve was developed; furthermore a 3-D adaptive measuring method based on Spline curve was also developed. According to the laser materials processing characteristics and data characteristics, necessary methods have been developed to generate processing tracks, they are explained in details. Measuring experiments and laser processing experiments were carried out to testify the above mentioned methods, which have been applied in the computer integrated and flexible laser processing system developed by the Institute of Mechanics, CAS.

SJ-5号卫星空间流体实验系统——开展遥科学实践

本文详细介绍了SJ-5号科学卫星微重力流体实验的用户系统的体系与配置及其对空间科学实验的支持。该系统在SJ-5号空间流体8天的实验过程中,取得约12000幅流场图象和30余小时全程多路温控温测数据,实现了两层流体在两个液池内的不同物理模型的实验,并通过姿控模式的改变实现在两种微重力水平下的对比实验。这是我国科学家首次以实验图象为判据的天地可交互方式完成的空间微重力流体科学实验研究。

Prevalence Of Shear Banding In Compression Of Zr41Ti14Cu12.5Ni10Be22.5 Pillars As Small As 150 Nm In Diameter

Recently, the size dependence of mechanical behaviors, particularly the yield strength and plastic deformation mode, of bulk metallic glasses (BMG) has created a great deal of interest. Contradicting conclusions have been drawn by different research groups, based on various experiments on different BMG systems. Based on in situ compression transmission electron microscopy (TEM) experiments on Zr41Ti14Cu12.5Ni10Be22.5 (Vit 1) nanopillars, this paper provides strong evidence that shear banding still prevails at specimen length scales as small as 150 nm in diameter. This is supported by in situ and ex situ images of shear bands, and by the carefully recorded displacement bursts under load control its well as load drops under displacement control. Finite element modeling of the stress state within the pillar shows that the unavoidable geometry constraints accompanying such experiments impart a strong effect on the experimental results, including non-uniform stress distributions and high level hydrostatic pressures. The seemingly improved compressive ductility is believed to be due to such geometry constraints. Observations underscore the notion that the mechanical behavior of metallic glasses, including strength and plastic deformation mode, is size independent at least in Vit 1. (C) 2009 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Laser action from 1,3,5,7-tetramethyl-2,6-diethyl-8-n-propyl pyrromethene-BF2

We measured spectroscopic and laser action properties of a novel 8-position substituted pyrromethene-BF2, namely 1,3,5,7-tetramethyl-2,6-diethyl-8-n-propyl pyrromethene-BF2 complex. The laser action was performed with the corresponding dye solution in ethanol, which was placed in a Littman-type laser cavity pumped by the second harmonic of a Q-switched Nd:YAG laser. The spectroscopic measurements clearly indicated that the corresponding dye solution in ethanol exhibited intense absorption in the visible spectral region with large fluorescence quantum yield. It possesses rather low triplet-triplet absorption in the spectral region 460-550 nm and almost negligible triplet-triplet absorption in the lasing spectral region. As a consequence, it lases nearly as efficiently as commercially available benchmark laser dyes such as Rhodamine-6G and outperformed them in wavelength tunability in our laser cavity and pump geometry. (C) 2002 Optical Society of America.

Simultaneous three-photon absorption induced ultraviolet upconversion in Pr3+:Y2SiO5 crystal by femtosecond laser irradiation

Near-infrared to ultraviolet upconversion luminescence was observed in the Pr3+ :Y2SiO5 crystal with 120 fs, 800 mn infrared laser irradiation. The observed emissions at around 270 nm and 305 nm could be assigned to 5d -> 4f transitions of Pr3+ ions. The relationship between the upconversion luminescence intensity and the pump power of the femtosecond laser reveals that the UV emission belongs to simultaneous three-photon absorption induced upconversion luminescence. (c) 2007 Elsevier B.V. All rights reserved.

Spectral analysis and control to obtain sub-5 fs pulses by femtosecond filamentation

A spectral-filter method is numerically demonstrated to obtain sub-5 fs pulses by using femtosecond filamentation in fused silica. Instead of employing spectral phase compensation, by properly employing a high-pass filter to select the broadened high-frequency spectra that are located almost in phase in the tailing edge of the self-compressed pulses owing to self-steepening, as short as single-cycle pulses can be obtained. For instance, for an input pulse with a duration of 50 fs and energy 2.2 mu J, the minimum pulse duration can reach to similar to 4 fs (about 1.5 cycles) by applying a proper spectral filter. (C) 2008 Optical Society of America

Generation of sub-5 fs pulses through cascade of filamentation and hollow fiber compression

A pulse-compression scheme based on cascade of filamentation and hollow fiber has been demonstrated, Pulses with duration of sub-5 fs and energy of 0.2 mJ near 800 nm have been generated by compressing the similar to 40 fs pulses from a commercial laser system. This method is promising to generate near monocycle high energy pulses. [GRAPHICS] Measured autocorrelation curve of the final compressed pulses with duration of sub-5 fs (black solid) and the simulated autocorrelation curve of 4.6 fs pulse near 800 rim (red dash) (C) 2008 by Astro Ltd. Published exclusively by WILEY-VCH Verlag GmbH & Co. KGaA

Optimization of single attosecond x-ray pulses by genetic algorithm control of the chirp and initial phase of 5 fs laser pulses

We show that the peak intensity of single attosecond x-ray pulses is enhanced by 1 or 2 orders of magnitude, the pulse duration is greatly compressed, and the optimal propagation distance is shortened by genetic algorithm optimization of the chirp and initial phase of 5 fs laser pulses. However, as the laser intensity increases, more efficient nonadiabatic self-phase matching can lead to a dramatically enhanced harmonic yield, and the efficiency of optimization decreases in the enhancement and compression of the generated attosecond pulses. (c) 2006 Optical Society of America.