表面等离子体激元共振与生物分子相互作用分析

对表面等离子体激元共振(surface plasmon resonance, SPR)的原理和在生物学研究方面的应用进行了综述。这种技术可以直接原位、实时地跟踪生物学实验研究系统, 而不需要附加参数如进行标记等手段, 具有高敏感性, 也可以连续监测吸附或解吸附过程。目前有关的应用涉及到生物学结合分析、动力学及亲和力测定、免疫识别研究、结构与活性研究和核酸研究等多个领域。

超高速碰撞效应的数值模拟

本文简要介绍和总结了有关超高速碰撞效应数值模拟研究的现状,讨论了数值格式和处理以及物理模型两个方面所取得的进展和存在的问题。

二元拉伐尔喷管不可压缩流动精确解

在物理平面上,仔细分析沿拉伐尔喷管中心线和喷管型线的流动,可以发现拉伐尔喷管流动的上下两半部分在速度平面中是两个相同的具有尾缘点前后错开的双尾的裂缝厚翼型。该两个翼型处在不同的黎曼面内。翼型的内部在复位势平面中可转绘成无限长的条带。利用这些结果得到了二元拉伐尔喷管内不可压缩位势流动的精确解。精确解对任意给定的收缩比n_1、扩张比n_2和喉部壁面曲率半径R

图像处理技术在板料激光弯曲中的应用

为了提高激光弯曲过程数值模拟结果的验证精度,用图像处理技术对铝合金板料AA6056进行了激光弯曲变形过程的实时测量.自行设计了硬件测量系统和软件的测试系统,使用MV21300UM CCD拍摄板料上测量点在激光照射过程中的动态变化过程,通过软件测试系统中实时采集软件记录动态变化过程、图像处理软件进行图像处理,得到了测量点动态变化的实测曲线.实测曲线表明,板料厚度对激光弯曲过程的位移变化影响较大,板料越薄,边界效应越明显,使得位移的变化曲线越易出现突变.实验结果证明该实测方案是可靠有效的.

X-shaped third harmonic generated by ultrashort infrared pulse filamentation in air

The authors report the measurement of the angularly resolved spectrum of the third harmonic generated in a femtosecond filament in air and its evolution with increasing pump power. Pumped by a focused infrared ultrashort pulse with a carrier wavelength of 1270 nm, a pulse duration of similar to 20 fs, and pulse energy up to 487 mu J, the generated third harmonic is composed of an on-axis emission and a conical ring emission. When the pump power is sufficiently high, angularly resolved spectra with significant X-like feature could be observed, indicating the formation of nonlinear X wave at third harmonic. (c) 2008 American Institute of Physics.

Defects in LPE-grown beta-barium borate (beta-BaB2O4) thin films

Morphological defects in beta-barium borate (beta-BBO) thin films grown on Sr2+ -doped alpha-BBO substrates by liquid phase epitaxy (LPE) technique were studied by scanning electron micrograph (SEM), atomic force microscopy (AFM) and optical spectroscopy. The present results indicate that the main defects exit in beta-BBO thin films are microcracks and hollow structure. The formation of microcrack is due to the lattice mismatch and the difference of thermal expansion coefficients between substrate and film. The hollow structure might be caused during the combination of islands, which formed in the initial stage. (C) 2006 Elsevier GmbH. All rights reserved.

高真空室中的水蒸气对HfO2薄膜性能的影响

本文研究了在镀膜过程中真空室内水蒸气的含量对HfO2薄膜物理性能的影响。用电子束蒸发和光电极值监控的方法在BK7基底上制备HfO2薄膜。利用残余气体分析仪在线监测了真空室内的残余气氛组成。分别用Lambda 900光谱仪、X射线衍射方法、表面热透镜技术和1064nm的激光器测试了薄膜的光学性能、微结构、吸收和激光损伤阈值。实验发现，附加冷阱装置有助于我们有效控制镀膜过程中的水汽含量，且在水蒸气含量较少的真空室内镀制的薄膜具有较高的折射率，较小的晶粒尺寸，较低的弱吸收值和较高的损伤阈值。

Structure and optical properties of Nb2O5 sculptured thin films by glancing angle deposition

Nb2O5 sculptured thin. films deposited by electron beam evaporation with glancing angle deposition were prepared. Nb2O5 sculptured thin. films with tilted columns are optical anisotropy. XRD, SEM, UV-vis-NIR spectra are employed to characterize the microstructure and optical properties. The maximum of birefringence (Delta n) is up to 0.045 at alpha = 70 degrees with packing density of 0.487. With increasing the deposition angle, refractive index and packing density of Nb2O5 STF are decreasing. The relationship among deposition parameter, microstructure and optical properties was investigated in detail. (C) 2008 Elsevier B. V. All rights reserved.