170 resultados para 369.11
em Chinese Academy of Sciences Institutional Repositories Grid Portal
Resumo:
A comprehensive strength monitoring system used on a fixed jacket platform is presented in this paper. The long-term monitoring of W-11-4A platform achieved. Structural responses (strain and acceleration) at selected locations, as well as associated environmental parameters, have been obtained. The emphasis of the paper is placed on the system design, and the instrumentation and operation methodology employed in the monitoring of the structural responses. The performance of the system and the characteristic results obtained during its 13-month operation are also summarized.
Resumo:
本文总结了针对涠１１－４平台一年多时间的应变和加速度监测数据的处理分析工作，详细介绍了所用的数据处理方法，给出了应变数据的统计结果及长期分布规律。通过对应变和加速度信号进行频谱分析，揭示了平台在多种环境条件下的振动特性。
Resumo:
本文介绍了一种固定式导管架平台综合强度监测系统，它用于对涠１１－４平台关键部位的应力、加速度及与结构响应相关的环境参数进行长期监测。讨论的重点内容是结构响应的测量方案、设备及实施方法，并对运行结果作了说明
Resumo:
Molecular dynamics (MD) simulations using Morse interaction potential are performed in studies of [110] symmetrical tilt grain boundary (GB) structures with mis-orientation angles 50.5 degrees(Sigma 11), 129.5 degrees(Sigma 11), 70.5 degrees(Sigma 3) and 109.5 degrees(Sigma 3) at various tempratures. The GB structures are found to start local disordering at about 0.5T(m)(T-m is the melting point of aluminium) for 50.5 degrees(Sigma 11), 0.32T(m) for 129.5 degrees(Sigma 11) and 0.38T(m) for 70.5 degrees(Sigma 3), respectively. These results agree with conclusions deduced from the anelastic measurements. But, for twin-boundary structure 109.5 degrees(Sigma 3), this disordering has not been found even when temperature increases up to 0.9T(m).
Resumo:
在电弧炉中利用吸铸法制备了直径1-4 mm的原位生成TiC和β-Ti枝晶联合增强的块状Cu47Ti34Zr11Ni8非晶合金复合材料.DSC热分析结果表明,原位生成TiC颗粒的引入,没有影响基体合金的非晶形成能力.用OM,XRD,SEM,EDS等方法研究了复合材料的相组成、微观组织以及成分分布,结果表明,TiC颗粒作为异质形核中心促进了β-Ti枝晶的形成,形成了TiC颗粒和β-Ti枝晶联合增强的块状Cu47Ti34Zr11Ni8非晶合金复合材料,而且β-Ti枝晶的尺寸和数量与TiC颗粒的多少以及试样的尺寸有关.室温压缩试验表明,同单相非晶合金相比,块状Cu47Ti34Zr11Ni8非晶合金复合材料提高了抗压强度及塑性.
Resumo:
第11届国际快淬和亚稳材料会议于2002年8月24~30日在英国牛津大学召开，本次会议由牛津大学材料系承办． 200多名来自欧洲、美国、加拿大、日本、韩国、印度、巴西、澳大利亚、新西兰、中国等29个国家的代表参加了本次大会．会议宣读口头报告244篇，张贴论文117篇，其中包括大会报告11篇，邀请报告31篇．会议论文经严格评审后由Materials Science and Engineering A杂志选择收录．下届会议将于2005年在韩国举行．
Resumo:
以力学为主线而进行的多学科综合的研究。主要工作包括平台结构应力、加速度和风、浪、流环境的监测与分析,疲劳分析和寿命估算,极端环境条件下平台人员工作安全性评估,以及数据的采集和处理技术。研究结果给定了与海洋平台结构设计和运行安全密切相关的力学规律和重要资料,为平台结构的强度设计与评估提供了实用依据。
Resumo:
Adiabatic shear localization is a mode of failure that occurs in dynamic loading. It is characterized by thermal softening occurring over a very narrow region of a material and is usually a precursor to ductile fracture and catastrophic failure. This reference source is the first detailed study of the mechanics and modes of adiabatic shear localization in solids, and provides a systematic description of a number of aspects of adiabatic shear banding. The inclusion of the appendices which provide a quick reference section and a comprehensive collection of thermomechanical data allows rapid access and understanding of the subject and its phenomena. The concepts and techniques described in this work can usefully be applied to solve a multitude of problems encountered by those investigating fracture and damage in materials, impact dynamics, metal working and other areas. This reference book has come about in response to the pressing demand of mechanical and metallurgical engineers for a high quality summary of the knowledge gained over the last twenty years. While fulfilling this requirement, the book is also of great interest to academics and researchers into materials performance.Table of Contents
| 1 | Introduction | 1 |
| 1.1 | What is an Adiabatic Shear Band? | 1 |
| 1.2 | The Importance of Adiabatic Shear Bands | 6 |
| 1.3 | Where Adiabatic Shear Bands Occur | 10 |
| 1.4 | Historical Aspects of Shear Bands | 11 |
| 1.5 | Adiabatic Shear Bands and Fracture Maps | 14 |
| 1.6 | Scope of the Book | 20 |
| 2 | Characteristic Aspects of Adiabatic Shear Bands | 24 |
| 2.1 | General Features | 24 |
| 2.2 | Deformed Bands | 27 |
| 2.3 | Transformed Bands | 28 |
| 2.4 | Variables Relevant to Adiabatic Shear Banding | 35 |
| 2.5 | Adiabatic Shear Bands in Non-Metals | 44 |
| 3 | Fracture and Damage Related to Adiabatic Shear Bands | 54 |
| 3.1 | Adiabatic Shear Band Induced Fracture | 54 |
| 3.2 | Microscopic Damage in Adiabatic Shear Bands | 57 |
| 3.3 | Metallurgical Implications | 69 |
| 3.4 | Effects of Stress State | 73 |
| 4 | Testing Methods | 76 |
| 4.1 | General Requirements and Remarks | 76 |
| 4.2 | Dynamic Torsion Tests | 80 |
| 4.3 | Dynamic Compression Tests | 91 |
| 4.4 | Contained Cylinder Tests | 95 |
| 4.5 | Transient Measurements | 98 |
| 5 | Constitutive Equations | 104 |
| 5.1 | Effect of Strain Rate on Stress-Strain Behaviour | 104 |
| 5.2 | Strain-Rate History Effects | 110 |
| 5.3 | Effect of Temperature on Stress-Strain Behaviour | 114 |
| 5.4 | Constitutive Equations for Non-Metals | 124 |
| 6 | Occurrence of Adiabatic Shear Bands | 125 |
| 6.1 | Empirical Criteria | 125 |
| 6.2 | One-Dimensional Equations and Linear Instability Analysis | 134 |
| 6.3 | Localization Analysis | 140 |
| 6.4 | Experimental Verification | 146 |
| 7 | Formation and Evolution of Shear Bands | 155 |
| 7.1 | Post-Instability Phenomena | 156 |
| 7.2 | Scaling and Approximations | 162 |
| 7.3 | Wave Trapping and Viscous Dissipation | 167 |
| 7.4 | The Intermediate Stage and the Formation of Adiabatic Shear Bands | 171 |
| 7.5 | Late Stage Behaviour and Post-Mortem Morphology | 179 |
| 7.6 | Adiabatic Shear Bands in Multi-Dimensional Stress States | 187 |
| 8 | Numerical Studies of Adiabatic Shear Bands | 194 |
| 8.1 | Objects, Problems and Techniques Involved in Numerical Simulations | 194 |
| 8.2 | One-Dimensional Simulation of Adiabatic Shear Banding | 199 |
| 8.3 | Simulation with Adaptive Finite Element Methods | 213 |
| 8.4 | Adiabatic Shear Bands in the Plane Strain Stress State | 218 |
| 9 | Selected Topics in Impact Dynamics | 229 |
| 9.1 | Planar Impact | 230 |
| 9.2 | Fragmentation | 237 |
| 9.3 | Penetration | 244 |
| 9.4 | Erosion | 255 |
| 9.5 | Ignition of Explosives | 261 |
| 9.6 | Explosive Welding | 268 |
| 10 | Selected Topics in Metalworking | 273 |
| 10.1 | Classification of Processes | 273 |
| 10.2 | Upsetting | 276 |
| 10.3 | Metalcutting | 286 |
| 10.4 | Blanking | 293 |
| Appendices | 297 | |
| A | Quick Reference | 298 |
| B | Specific Heat and Thermal Conductivity | 301 |
| C | Thermal Softening and Related Temperature Dependence | 312 |
| D | Materials Showing Adiabatic Shear Bands | 335 |
| E | Specification of Selected Materials Showing Adiabatic Shear Bands | 341 |
| F | Conversion Factors | 357 |
| References | 358 | |
| Author Index | 369 | |
| Subject Index | 375 |
Resumo:
<正>基础研究是国家科技发展的原动力,学科的交融与渗透已经成为当今科学发展的重要趋势,促进交叉学科的健康成长是目前科学界普遍关心的问题之一。分析近百年来获得诺贝尔自然科学奖的300多项成果中,近一半的项目是多学科合作的研究成果,对170多位生理学或医学诺贝尔奖获得者及他们的原创性成果的统计研究发现,具有跨学科知识
Resumo:
为了寻找可能替代蓝宝石作为氮化镓外延的新型衬底，通过48h的气相传输平衡，分别在1000℃、1030℃、1050℃、1070℃和1100℃制备了一层单相多晶的γ铝酸锂膜。X射线衍射和扫描电镜分别用于表征膜的物相、取向和表面形貌。结果显示，γ铝酸锂择优取向的好坏取决于气相平衡传输温度，在1050℃制备的γ铝酸锂具有高度的[100]择优取向；在γ铝酸锂（001）面上的双轴拉应力可能有助于[100]择优取向的形成；γ铝酸锂晶粒表面裂纹的方向一致性与其择优取向紧密相关。上述结果表明在合适的工艺条件下，气相传输平衡
