Electro-Osmotic Flow and Mixing in Heterogeneous Microchannels

Analytical and numerical studies of secondary electro-osmotic flow EOF and its mixing in microchannels with heterogeneous zeta potentials are carried out in the present work. The secondary EOFs are analyzed by solving the Stokes equation with heterogeneous slip velocity boundary conditions. The analytical results obtained are compared with the direct numerical simulation of the Navier-Stokes equations. The secondary EOFs could transport scalar in larger areas and increase the scalar gradients, which significantly improve the mixing rate of scalars. It is shown that the heterogeneous zeta potentials could generate complex flow patterns and be used to enhance scalar mixing.

A Numerical Study for Turbulent Flow and Thermal Influence Over Inhomogenous Canopy of Roughness Elements

A large-eddy simulation with transitional structure function(TSF) subgrid model we previously proposed was performed to investigate the turbulent flow with thermal influence over an inhomogeneous canopy, which was represented as alternative large and small roughness elements. The aerodynamic and thermodynamic effects of the presence of a layer of large roughness elements were modelled by adding a drag term to the three-dimensional Navier-Stokes equations and a heat source/sink term to the scalar equation, respectively. The layer of small roughness elements was simply treated using the method as described in paper (Moeng 1984, J. Atmos Sci. 41, 2052-2062) for homogeneous rough surface. The horizontally averaged statistics such as mean vertical profiles of wind velocity, air temperature, et al., are in reasonable agreement with Gao et al.(1989, Boundary layer meteorol. 47, 349-377) field observation (homogeneous canopy). Not surprisingly, the calculated instantaneous velocity and temperature fields show that the roughness elements considerably changed the turbulent structure within the canopy. The adjustment of the mean vertical profiles of velocity and temperature was studied, which was found qualitatively comparable with Belcher et al. (2003, J Fluid Mech. 488, 369-398)'s theoretical results. The urban heat island(UHI) was investigated imposing heat source in the region of large roughness elements. An elevated inversion layer, a phenomenon often observed in the urban area (Sang et al., J Wind Eng. Ind. Aesodyn. 87, 243-258)'s was successfully simulated above the canopy. The cool island(CI) was also investigated imposing heat sink to simply model the evaporation of plant canopy. An inversion layer was found very stable and robust within the canopy.

异硫氰酸荧光素-溶菌酶的制备及晶体生长预研究

迄今尚未有适用于光源为488 nm激光扫描共聚焦显微镜研究用的溶菌酶.为此,用异硫氰酸荧光素作为探针标记了溶菌酶,测定了溶菌酶标记物的紫外-可见吸收光谱和荧光光谱,摸索了其晶体的生长条件.实验结果表明,在标记过程中异硫氰酸荧光素没有影响溶菌酶的生化性质,标记后的溶菌酶可用于激光扫描共聚焦显微镜进行后续研究.

Dynamic mode I perturbation solution for a moving crack unsteadily

Rice et al. (Jounal of Mechanics and Physics of Solids 42, 813-843) analyze the propagation of a planar crack with a nominally straight front in a model elastic solid with a single displacement component. Using the form of Willis er al. (Journal of the Mechanics and Physics of Solids 43, 319-341), of dynamic mode I weight functions for a moving crack, we address that problem solved by Rice ei al. in the 3D context of elastodynamic theory. Oscillatory crack tip motion results from constructive-destructive interference of stress intensity waves. Those waves, including system of the dilatational, shear and Rayleigh waves, interact on each other and with moving edge of crack, can lead to continuing fluctuations of the crack front and propagation velocity. (C) 1997 Elsevier Science Ltd.

Observation and modeling for terrestrial processes in alpine meadow

The water-heat transfer process between land and atmosphere in Haibei alpine meadow area has been systematically observed. A multi-layer coupling model for land-atmosphere interaction was presented with special attention paid to the moisture transfer in leaf stomata under unsaturated condition. A profound investigation on the physical process of turbulent transfer inside the vegetation has been performed with a revised formula of water absorption for root system. The present model facilitates the study of vertically distributed physical variables in detail. Numerical simulation was conducted according to the transfer process of Kinesia humility meadow in the area of Haibei Alpine Meadow Ecosystem Station, CAS. The calculated results agree well with observation.

用量子Monte Carlo方法计算氢分子H_2基态(Χ~1∑_g~+)势能曲线

本文用量子MontoCarlo方法中优化试探波函数Ψ_T计算氢分子H_2基态(X~1∑_g~+)势能曲线.文中采用相当简单的波函数形式,并用固定样点优化技术优化试探波函数的参数.确定优化试探波函数后,分别用变分Monte Carlo及固定节面M0nte Carlo计算势能曲线各点能值.二种方法先后得95%和100%的相关能.因此,在量子M0nte Carlo方法中,用本文作者提出的试探波函数计算分子势能面,将会获得很好的结果.从而对分子散射和动力学的研究有重要意义.

边界元法在求解复合材料力学问题中的应用

本文讨论了边界元法在求解复合材料的微观力学、宏观力学和结构力学问题中的应用,并指出边界元法用于分析复合材料及其结构的力学问题的优点和局限性。

烧蚀图象研究概述

本文着重介绍了林同骥和他的合作者们在烧蚀图象方面的研究工作,包括再入飞行器、地面实验模型和吉林陨石三部分。他们发现烧蚀图象是受烧蚀表面的边界层雷诺数控制的。研究了两种典型的烧蚀图象:有序熔楔和菱形花纹。得到了再入飞行器和模型的转捩雷诺数。

损伤材料裂纹尖端附近的应力场

本文导出了损伤材料的全量理论,导出了全量公式中H的渐近表达式;最后得到损伤材料平面应变条件下的裂纹尖端的应力应变场。

二阶非线性微分方程亚/超谐共振的一种求解方法及其应用研究

本文引用了非线性共振频率的概念,指出如何求主共振频率域及其中心。采用新的办法对单自由度非线性系统的亚/超谐共振进行了研究。作为例子讨论了Duffing方程,给出了1/7,1/5,1/2,3/5,5/3,2,5次谐波共振的结果。模拟计算机的计算结果对所给理论作了部分验证。

Non-die explosive forming of spherical pressure-vessels

This paper presents a newly developed method of manufacturing spherical pressure vessels based on the technology of non-die explosive forming. Compared with the traditional method, this technology does not need any dies and pressing equipment, so that the cost of the production process can be greatly reduced, especially for vessels of less than 100 m3 capacity.

Distribution, stability, bifurcations and catastrophe of steady rotation of a symmetrical heavy gyroscope with viscous-liquid-filled cavity

The number, the angles of orientation and the stability in Rumyantsev Movchan's sense of oblique steady rotations of a symmetric heavy gyroscope with a cavity completely filled with a uniform viscous liquid, possessing a fixed point 0 on its symmetric axis. are given for various values of the parameters. By taking the square of the upright component of the angular momentum M2 as a control parameter, three types of bifurcation diagrams of the steady rotations, two types of jumps and two kinds of local catastrophes, one being the symmetric reduced cusp type and the other being of the symmetric reduced butterfly type, are obtained. By taking account of the M2-damping owing to the moment of unavoidable faint friction, two different modes for the gyroscope, initially in a stable quasi-steady upright rotation with a nutation angle theta(s) equal to zero, to topple over are found.

On the invariant representation of spin tensors with applications

The invariant representation of the spin tensor defined as the rotation rate of a principal triad for a symmetric and non-degenerate tensor is derived on the basis of the general solution of a linear tensorial equation. The result can be naturally specified to study the. spin of the stretch tensors and to investigate the relations between various rotation rate tensors encountered frequently in modern continuum mechanics. A remarkable formula which relates the generalized stress conjugate to the generalized strain in Hill's sense. to Cauchy stress, is obtained in invariant form through the work conjugate principle. Particularly, a detailed discussion on the time rate of logarithmic strain and its conjugate stress is made as the principal axes of strain arc not fixed during deformation.