Direct Numerical Simulation of a Spatially Evolving Supersonic Turbulent Boundary Layer at Ma=6

Direct numerical simulation is carried out for a spatially evolving supersonic turbulent boundary layer at free-stream Mach number 6. To overcome numerical instability, the seventh-order WENO scheme is used for the convection terms of Navier-Stokes equations, and fine mesh is adopted to minimize numerical dissipation. Compressibilty effects on the near-wall turbulent kinetic energy budget are studied. The cross-stream extended self-similarity and scaling exponents including the near-wall region are studied. In high Mach number flows, the coherence vortex structures are arranged to be smoother and streamwised, and the hair-pin vortices are less likely to occur.

The Effect of Conical Flowfields on the Performance of Waveriders at Mach 6

The performance of 23 kinds of waveriders, derived from different conical flowfields, is analyzed by the numerical computation under the conditions of fight speed of Mach 6, attack angle of 0° and flight altitude of 30 km. These results indicate that the performance is influenced by the shapes and the width to height ratios (W/H ) of generating cones. The geometrical parameter and the lift coefficient are proportional to W/H, while the drag coefficient and the lift to drag ratio (L/D ) have extreme values. Considering the base drag and the computation errors, the waverider with the highest L/D is cut from the elliptical cone’s flowfield (W/H = 1.5―1.618), and the configuration with the lowest drag can also be obtained at W/H = 1:1.5. Accordingly, good suggestions are proposed for practical design based on these computational results.

6马赫锥体流场对乘波体性能的影响及规律

以CFD计算为分析工具，在6马赫飞行速度、0°飞行攻角和30km飞行高度的设计条件下，综合分析了23种源自不同锥体流场所获乘波体的性能．分析结果表明，基本锥体的截面形状及截面宽高比均对乘波体性能有较大影响；当基本锥体的宽高比变化时，相应乘波体几何参数和升力系数的变化基本与之呈正比关系，而阻力系数及升阻比则出现极值．此外，我们发现在此飞行状态下，综合考虑乘波体底部阻力及计算误差等因素，当基本锥体为椭圆锥，且截面椭圆宽高比在1．5～1．618时，所获得的乘波体具有最大的升阻比；而当截面椭圆宽高比约为1：1．5时，所获得乘波体阻力最小．依据所得的计算结果，对于乘波飞行器的实际设计给出了相应的建议．

YAG激光毛化技术进展

二十世纪八十年代，当比利时冶金研究中心(CRM)开发出CO_2激光毛化冷轧辊技术后，尝试用YAG激光进行轧辊毛化一直吸引着众多的研究者，这是因为YAG(1.06μm)激光波长比CO_2(10.6μm)激光波长短一个量级，材料对YAG激光有更高的吸收率，并用YAG激光可以聚焦到更小的光斑尺寸，同时使用电信号驱动的声光开关技术便于对毛化分布进行可设定控制。但是用传统声光调制的YAG激光虽然可以碇以很高的脉冲频率(>30kHz)，但单脉冲有量仅为10mJ左右，难以达到辊面毛化粗糙度的要求，因此人们认为YAG激光用于毛化的主要困难是脉冲能量太小。

Experimental Studies on Model Scramjet in a Mach 6 High Enthalpy Free-Jet Wind Tunnel

A side-wall compression scramjet model with different combustor geometries has been tested in a propulsion tunnel that typically provides the testing flow with Mach number of 5.8, total temperature of 1800K, total pressure of 4.5MPa and mass flow rate of 4kg/s. This kerosene-fueled scramjet model consists of a side-wall compression inlet, a combustor and a thrust nozzle. A strut was used to increase the contraction ratio and to inject fuels, as well as a mixing enhancement device. Several wall cavities were also employed for flame-holding. In order to shorten the ignition delay time of the kerosene fuel, a little amount of hydrogen was used as a pilot flame. The pressure along the combustor has an evident raise after ignition occurred. Consequently thrust was observed during the fuel-on period. However, the thrust was still less than the drag of the scramjet model. For this reason, the drag variation produced by different strut and cavities was tested. Typical results showed that the cavities do not influence the drag so much, but the length of the strut does.

Visual C++ 6.0学习教程

MicrosoftVisualC十十6.0作为Microsoft Visual Studio的重要组成部分，包含了迄今为止功能最为强大的基于Windows的应用框架，在同类产品中处于领先地位。VisualC十十6.0是Microsoft迄今为止最全面、最完善的程序开发工具，为了适应各种编程风格，该软件提供了各种各样的辅助工具，在发挥编程能力和提高灵活性方面达到了空前的水平。与以往VisualC十十的各种版本相比较，VisualC十十6.0在编程环境、程序语言技术等方面做了许多改进，从而使VisualC十十更加适合专业程序员快速进行应用程序的开发。

本书内容丰富、图文并茂，是一本适合各种读者学习VisualC十十6.0的优秀参考书。

目 录
第一章 VisualC十十6.0简介及安装
1.1VisualC十十6.0新特性
1.2viSualC十十6.0开发环境简介
1.3如何学习使用VisualC十十6.0
1.4VisualC十十6.0的安装
第二章 走进C十十的世界
2.1类和对象的简介
2.2继承和多态性――一个具体的例子
2.3内嵌对象
2.4在栈中申请对象
2.5全程对象的申请
2.6对象之间的相互关系――指针数据成员
2.7this指针的使用
2.8对指针的引用
2.9友元类和友元函数
2.10静态类成员
2.11重载运算符
2.12从代码中分离出类定义
2.13匈牙利表示法
第三章 VisualC十十6.0的编程环境
3.1VisualC十十6.0主窗口
3.2VisualC十十6.0工具栏
3.3VisualC十十6.0菜单栏
3.4项目与项目工作区
3.5资源与资源编辑器
第四章 编一个最简单的VC十十程序
4.1什么是AppWizard？
4.2迎接你的第一个AppWizard程序
4.3“Iamaprogrammer.”在哪儿？
第五章 程序框架入门
5.1一个简化过的程序框架
5.2WinMain（）：第一个动作
5.3登记窗口类
5.4创建一个窗口
5.5显示窗口
5.6显示出那条消息
5.7窗口类与窗口对象
第六章 消息循环
6.1在消息循环中兜圈子
6.2对事件做出响应：WindowFun（）
6.3响应不同的消息
6.4现在你还跟得上吗？
6.5设备界面进行交互
第七章 精通程序框架
7.1WinMain（）函数在哪儿？
7.2应用程序框架和源文件
7.3工具条、状态条和打印等选项
7.4程序的控制流程
第八章 使用classWizard编程
8.1使用ClassWizard添加消息处理函数
8.2classWizard功能介绍
8.3传送鼠标消息
8.4保存鼠标绘图的信息
第九章 视图与文档
9.1Document－View模式
9.2从视图中分离出文档
9.3保存文档
9.4再访MyProg2.cpp
第十章 对象连接与嵌入（OLE）及其自动化
10.1公共对象模式（COM）
10.2类厂（classfactory）
10.3OLE自动化
10.4IDispatch接口
第十一章 动态连接库（DLLs）
11.1为什么使用DLL
11.2传统的DLL
11.3MFC库DLL
11.4MyProg4A――编写自己的类库扩展DLL
11.5MyProg4B――使用MFC库扩展DLL
11.6资源访问
第十二章 图形设备接口
12.1设备环境类
12.2GDI对象
12.3Windows的颜色映射
12.4映射方式
12.5字体
12.6MyProg3例程序
12.7MyProg3B程序
12.8MyPr0g3C例程序――使用CScrollView
第十三章 对话框
13.1在状态条上显示对话控件的帮助信息
13.2利用Fi1eOpen通用对话框打开多个文件
13.3定制通用文件对话框
13.4扩展和缩减一个对话框
13.5显示一个模式或无模式对话框
13.6编写定制的DDX/DDV例程
第十四章 剖析工具Spy十＋
14.1窗体
14.2消息
14.3进程与线程
第十五章 代码调试
15.1TRACE
15.2调试框架
15.3自我诊断
15.4调试代码的作用
15.5用Dump（）显示对象的信息
15.6检查内存

Laser action from 1,3,5,7-tetramethyl-2,6-diethyl-8-n-propyl pyrromethene-BF2

We measured spectroscopic and laser action properties of a novel 8-position substituted pyrromethene-BF2, namely 1,3,5,7-tetramethyl-2,6-diethyl-8-n-propyl pyrromethene-BF2 complex. The laser action was performed with the corresponding dye solution in ethanol, which was placed in a Littman-type laser cavity pumped by the second harmonic of a Q-switched Nd:YAG laser. The spectroscopic measurements clearly indicated that the corresponding dye solution in ethanol exhibited intense absorption in the visible spectral region with large fluorescence quantum yield. It possesses rather low triplet-triplet absorption in the spectral region 460-550 nm and almost negligible triplet-triplet absorption in the lasing spectral region. As a consequence, it lases nearly as efficiently as commercially available benchmark laser dyes such as Rhodamine-6G and outperformed them in wavelength tunability in our laser cavity and pump geometry. (C) 2002 Optical Society of America.

消色差相位匹配在光参量啁啾脉冲放大中的应用

Optical parametric chirped-pulse amplification (OPCPA) supplies broadband gain for ultrashort pulses. A new theoretic explanation of OPCPA has been obtained by introducing the concept of tilted pulse front in this paper, and the distribution of broadband amplification has been twice expanded by introducing the technology of achromatic phase matching (APM). The prospect of APM in OPCPA has been discussed in detail. Finally, a design for the amplification of chirped pulses at 1600 nm has been firstly proposed and numerically simulated. (C) 2004 Elsevier B.V. All rights reserved.

光学领域里的一对奇葩——介绍2005年诺贝尔物理学奖

2005年诺贝尔物理学奖授于了光学研究领域里的两项原创性工作：1963年美国物理学家罗伊·格劳伯（R．J．Glauber 1925～）提出的“相干性量子理论”，以及1983年美国物理学家约翰·霍尔（J．L．Hall．1934～）和德国物理学家特奥多尔·亨施（T．W．Hansch．1941～）利用激光的特性对精确测量技术所作的发展。近些年来诺贝尔物理学奖频频惠顾光学研究领域。如2001年诺贝尔物理学奖授予了从事玻色一爱因斯坦凝聚的相关研究、1997年诺贝尔物理学奖授予华裔科学家朱棣文从事的激光冷却和俘获原子

The effect of the group delay ripple of chirped fiber grating on composite second-order in optical fiber CATV system

The effect of group delay ripple of chirped fiber gratings on composite second-order (CSO) performance in optical fiber CATV system is investigated. We analyze the system CSO performances for different ripple amplitudes, periods and residual dispersion amounts in detail. It is found that the large ripple amplitude and small ripple period will deteriorate the system CSO performance seriously. Additionally, the residual dispersion amount has considerable effect on CSO performance in the case of small ripple amplitude and large ripple period. (c) 2004 Elsevier B.V. All rights reserved.

2-氨基-6-乙氧基苯并噻唑类偶氮染料及其金属鏊合物的合成及光学热学性能研究

合成了2-（2-氨基-6-乙氧基苯并噻唑基偶氮）-5-（N,N-二乙基氨基）三氟甲基磺酰苯胺偶氮染料（EBTDATFS）及其与乙酸镍、乙酸钴、乙酸铜、乙酸锌等金属盐鏊合的金属鏊合物。通过红外光谱、紫外-可见吸收光谱和MALDI质谱等对染料及其金属鏊合物进行了结构表征;使用旋涂方法在K9玻璃和抛光的单晶硅基片上制备薄膜;研究了镍金属鏊合物的热学性能;使用椭偏仪研究了Ni和Zn鏊合物的光学常数。结果表明：4种金属鏊合物薄膜最大吸收光谱为621-629nm,且长波边吸收峰陡峭;TGA-DSC测试结果表明镍金属鏊

铒玻璃在1．54μm实现1 Hz下3 J和5 Hz下0．6 J的激光输出

近年来,随着激光告警、激光指示、风速测量、激光雷达尤其是激光美容等方面的需求逐渐增加,要求掺铒激光玻璃能够实现比以往更高重复频率以及更大能量的激光输出,其中对脉冲能量的要求达1～10 J。