跨声速圆球阻力和流场

本文在跨声速范围内将阻力系数看作的函数,选择随马赫数变化很灵敏的脱体激波距离δ/R作为校核马赫数Ma_∞的一个标准量,通过大量实验,在小型1~#弹道靶上得到了0.8≤Ma_∞<1.3,10~4

海洋平台结构中的疲劳问题

<正> 近三十年来,人们将注意力逐渐转向海洋,因为人们认识到海洋不仅是海上交通和军事活动的重要场所,而且海洋还蕴藏着巨大的资源,包括数以千亿吨计的石油资源和矿物资源。世界上许多国家都投入大量的人力和物力进行大规模的海洋开发。70年代以来,海洋科学技术获得了迅速的发展,相信不久,人类将进入海洋开发的新时代。

φ800激波管流场参数测量

<正> 1.实验装置和测量原理 本实验使用不锈钢圆形直激波管,高压段长1.6m,内径223mm;低压及实验段内径800mm。使用氢氧燃烧驱动,驱动压力约80ata,测量支架距膜片的有效距离为14m。 我们用薄膜电阻温度计式的金膜热探头在激波管中测量②区长度和波面形状,用电探针来测量分界区与③区的交界处。它们的信号直接或经过热电模拟线路以后,输

Numerical analyses for the material bifurcation in plane sheet under tension

The various patterns (shear banding, surface wrinkling and necking) of material bifurcation in plane sheet under tension are investigated in this paper by means of a numerical method. It is found that numerical analysis can provide better ground for searching for the lowest critical loads. The inhomogeneity caused by void damage and the nonuniformity in the stress distribution across sheet thickness are proved to have detrimental effects on the material bifurcation. Nevertheless, material stability can be promoted by any means of depressing void damage or alleviating stress, even locally across the thickness. Besides, the peculiar behaviour of material bifurcation under slight biaxiality state is demonstrated. Copyright (C) 1996 Elsevier Science Ltd

Creep behavior of woven roving grp beam in three-point bending

The creep and relaxation behaviour of laminated glass fibre reinforced plastics (GRP) in three-point bending were studied both experimentally and analytically. Creep and relaxation experiments were carried out on eight types of specimens, consisting of glass fibre fabric reinforced epoxy beams. While the bending deflexion and creep strains were measured in the creep tests, the load and relaxation strain were recorded in the relaxation tests. Marked creep effects were seen in the tests, where the environment temperature was 50°C and the period of the measurement was 60 min. An attempt to predict the creep deflexion and relaxation behaviour was made. The transverse shear effect on creep deflexion was taken into account. The predicted results were compared with experimental ones. They were found to be in reasonable agreement, but the linearization assumption, upon which the relaxation behaviour analysis was based, appears to lead to larger inaccuracies in the results.

线性稳定性理论在圆管充分发展两相流型研究中的应用

圆截面光滑直管内充分发展的两流体同心环状流的线性稳定性研究不仅具有重要的学术意义，而且在预测两相流型转换方面有着重要应用。本文评述了该流动构型的线性稳定性研究进展，着重分析了该流动构型的失稳机制及其与两相流型转换间的关系，并针对微重力气－液两相流地面模拟实验问题，探讨了今后需要着重研究的若干方面。

板壳断裂力学

本书阐明了板壳断裂理论的基础。论证了Reissner型板壳断裂理论的科学性、经典板壳断裂理论的缺陷及在一定范围内仍具有的实用价值；介绍了作者所创意的研究Reissner型板壳断裂纹尖端场的方法等。

目录

Reflection and refraction of light at the interface of a uniaxial bicrystal

This paper deals with a theoretical analysis of the reflection and refraction of light at the interface of a bicrystal by use of Maxwell's equations. For a general case, the formulas of Snell's Law and the four Fresnel coefficients for the reflection and refraction of extraordinary light at the interface of a uniaxial bicrystal are derived for the first time, as well as the Brewster angle value. The condition for total reflection is presented and the electromagnetic fields distributions at both sides of a bicrystal are presented when total reflection occurs.

Enhancement and broadening of extreme-ultraviolet supercontinuum in a relative phase controlled two-color laser field

We experimentally demonstrate the generation of an extreme-ultraviolet (XUV) supercontinuum in argon with a two-color laser field consisting of an intense 7 fs pulse at 800 nm and a relatively weak 37 fs pulse at 400 nm. By controlling the relative time delay between the two laser pulses, we observe enhanced high-order harmonic generation as well as spectral broadening of the supercontinuum. A method to produce isolated attosecond pulses with variable width and intensity is proposed. (C) 2008 Optical Society of America.

基于双面反射镜的N×N光开关的特性分析和实验研究

报道了基于双面反射镜的N×N光开关器件。介绍了使用双面反射镜的2×2, 4×4光开关的集成光路设计和工作原理; 采用Benes网络, 以2×2和4×4光开关为基本单元的N×N光开关器件的整体结构, 并根据“一笔画”原理, 分析了4×4, 8×8和16×16光开关矩阵的可重排无阻塞特性和光开关矩阵的光路选择算法。最后, 基于2×2, 4×4光开关技术制备了16×16光开关矩阵。测试表明, 该器件具有良好的插入损耗、回波损耗、串扰和开关时间等性能, 从而验证了设计思想和工艺的可行性。在基于双面反射镜的光开关矩