2,4-D对鱼腥藻增殖的效应

本文在实验室批量培养,室外小池大量培养和塑料大棚大面积培养的基础上,研究了植物激素2,4-D刺激鱼腥藻增殖的效应。浓度在0.01—2.00μg/mL范围内都具有刺激鱼腥藻增殖的效果,随着浓度增加,这种效果降低。品质分析结果表明,0.01μg/mL2.4-D可提高蛋白质和叶绿素a的含量;浓度为0.05μg/mL时,二者的含量与对照相差不大;浓度达到0.1μg/mL时,二者的含量降低。本文提出,2,4-D刺激鱼腥藻增殖的应用浓度应在0.05μg/mL以下,以0.01μg/mL效果最佳。

成核剂1,3:2,4-二(亚苄基)-D山梨醇对PET/PEN共混体系结构和结晶形态影响

利用差示扫描量热仪、X射线衍射仪、正交偏光显微镜研究了成核剂 1,3 :2 ,4-二 (亚苄基 ) -D山梨醇(DBS)对聚对苯二甲酸乙二醇酯 (PET) /聚 2 ,6-萘二甲酸乙二醇酯 (PEN)共混体系的结构及结晶形态的影响。结果表明 :成核剂的加入 ,使PET/PEN共混体系熔融起始温度升高 10℃左右 ,结晶峰形变尖锐 ,说明加入成核剂后有效促进了PET/PEN共混体系的结晶。实验结果表明 :成核剂含量低于 1%时 ,PET/PEN共混体系晶体的球晶完整。成核剂含量大于 3 %时 ,PET/PEN /DBS共混体系晶体的球晶碎小。成核剂的加入 ,能够有效地减小球晶尺寸和降低球晶的完善性

镧系金属有机配合物Gd(2,4-C_7H_(11))_3的晶体和分子结构

2,4-二甲基戊二烯基的金属配合物在一些性质上可与相应的环戊二烯配合物相比拟。已报道了许多d过渡金属以及碱金属钾的配合物的晶体结构。对于镧系金属,仅Ernst等得到了2,4-二甲基戊二烯钕的配合物并测定了晶体结构,其晶格中含有无序的乙醚溶剂分子。本文报道了不含溶剂分子的Gd(2,4-C_7H_(11))_3,配合物在低温下的晶体结构。

5，6-二羟基-2-（4-羟苯基）-4-酮-4H-1-苯并吡喃基-7-羟基-β-D-葡萄糖醛酸在制药中的应用

本发明提供化合物5，6-二羟基-2-(4-羟苯基)-4-酮-4H-1-苯并吡喃基-7-羟基-β-D-葡萄糖醛酸在制备抗艾滋病药物中和在制备逆转录酶抑制剂药物中的应用。

（一）2，4－二甲基戊二烯基烯土氯化物的合成及其对丁二烯的聚合活性（二）酞菁铜衍生物 LB 膜材料的合成及其气敏特性

本文通过元素分析，红外光谱，热失重分析，质谱。X 光电子能谱的测定以及对化合水解产物的分析。确认合成了下列三种新型 2，4－二甲基戊二烯基稀土氯化物。（I）[2,4-(CH_3)_2C_5H_5]LnCl_2·nTHF (2,4-(CH_3)_2C_5H_5 = 2, 4－二甲基戊二烯基；Ln = Pr, Nd, Sm, Gd; n = 3)。（II）[2,4-(CH_3)_2C_5H_5]LnCl_2·nTHF (Ln = Pr, Nd; n = 2, 3)。（III）[2,4-(CH_3)_2C_5H_5]LnCl_2·nTHF (Ln = Nd, Sm; n = 1)。在稀土金属有机化合物中尚未见此类化合物的报导。化合物的质谱分析结果表明，配位的四氢呋喃分子容易从配合物分子中脱落，形成带一个四氢呋喃，甚至不带四氢呋喃的配合物。说明配合物分子中不带四氢呋喃的形式是较稳定的。化合物的 X 光电子能谱结果表明化合物不是混合物。化合物水解产物的定量气相色谱分析进一步证实所合成的化合物为我们所预期的产物。实验结果表明，单体转化率受溶剂影响较大。在以环戊烷为溶剂的聚合反应中，聚合活性较高。而以甲苯为溶剂的聚合反应中，其聚合活性较低。在主催化剂不变的条件下，改变 Al/Nd 摩尔比，单体的转化率有明显的变化。同一 Al/Nd 摩尔比，不同催化剂用量也对单体的转化率有较大的影响。对聚合物的微观结构分析表明，溶剂，铝钕摩尔比催化剂用量对聚丁二烯的顺－1，4 含量均有影响，但影响不大。

Supramolecular isomerism in zinc hydroxide coordination polymers with pyridine-2,4-dicarboxylic acid: Two polymorphs with centrosymmetric two-dimensional and acentric three-dimensional coordination networks

Reactions of Zn(BF4)(2) and pyridine-2,4-dicarboxylic acid (2,4-pydcH(2)) in the presence of 1,2-bis( 4-pyridyl) ethylene or 1,3-bis(4-pyridyl) propane under hydro(solvo) thermal conditions yielded two polymorphic metal-organic coordination polymers formulated as Zn-2(OH)(2)(2,4-pydc) (1 and 2). Polymorph 1 features a two-dimensional (2-D) layer-like structure that is constructed by 2,4-pydc ligands bridging between the Zn-OH-Zn double-chain units. Each single Zn-OH-Zn chain is composed of mu(2)-OH groups connecting trigonal bipyramidal and tetrahedral Zn centers. Polymorph 2 is a 3-D coordination polymer containing 2-D Zn-OH-Zn sheets that consist of mu(2)- and mu(3)-OH groups and trigonal bipyramidal Zn centers. The sheets are pillared by 2,4-pydc ligands to form an acentric structural architecture. 1 and 2 are rare examples that the two polymorphs exhibit a centrosymmetric 2-D coordination network and an acentric 3-D coordination network, respectively. The different structures lead to differences in photoluminescent properties and thermal stabilities for 1 and 2.

Adsorption of heavy rare earth(III) with extraction resin containing bis(2,4,4-trimethylpentyl) monothiophosphinic acid

In the present paper, the adsorption of thulium(Ill) from chloride medium on an extraction resin containing bis(2,4,4-trimethylpentyl) monothiophosphinic acid (CL302, HL) has been studied. The results show that 1.5 h is enough for the adsorption equilibrium. The distribution coefficients are determined as a function of the acidity of the aqueous phase and the data are analyzed both graphically and numerically. The plots of log D versus pH give a straight line with a slope of about 3, indicating that 3 protons are released in the adsorption reaction of thulium(III). The content of Cyanex302 in the resin is determined to be 48.21%. The total amount of Tm3+ adsorbed up to resin saturation is determined to be 82.46 mg Tm3+/g resin. Therefore, the sorption reactions of Tm3+ from chloride medium with CL302 can be described as: Tm3+ + 3HL((r)) <----> TmL3(r) + 3H(+) The Freundlich's isothermal adsorption equation is also determined as: log Q = 0.73 log C + 3.05 The amounts (Q) of Tm3+ adsorbed with the resin have been studied at different temperatures (15-40degreesC) at fixed concentrations of Tm3+, amounts of extraction resin, ion strength and acidities in the aqueous phase.

Synthesis and. crystal structure of N '-(4-fluorobenzylidene)-2-(1H-1,2,4-triazole-1-yl) acetohydrazide

N'-(4-fluorobenzylidene)-2-(1H-1 2,4-triazole-1-yl) acetohydrazide was synthesized by the reaction of 4-fluorobenzaldehyde with 2-(1H-1 2,4-triazole-1-yl) acetohydrazide. The structure was confirmed via elemental analysis, MS, H-1 NMR, IR, and X-ray diffraction. It crystallized in a monoclinic system with space group P2 (1) a = 0.4905 (1) nm, b = 0.8160 (2) nm, c = 1.4105 (3) nm, beta = 93.33 (3)degrees, Z = 2, V = 0.5636 (2) nm(3), D-c = 1.457 Mg/m(3), mu = 0.112 mm(-1), F(000) = 256, and final R-1 = 0.0685. Several intermolecular hydrogen-bond interactions existed in the crystal structure, facilitating the stabilization of the compound.