~(183)Au核高自旋态转动带结构研究

通过重离子熔合蒸发反应和在束核谱学实验方法研究了奇A核183Au的高自旋态能级结构.扩展并更新了183Au的能级纲图.首次建立了183Au的πi13/2转动带的能量非优先带.分析并讨论了183Au中πh9/2转动带的能量非优先带和πf7/2转动带间的相互作用.

W-183 NMR characterization of rare earth heteropolymetalates in aqueous solution

W-183 NMR spectra were obtained for [La(AsW11O39)(2)](11-), [La(As2W17O61)(2)](17-), [La(SiW9Mo2O39)(2)](13-), [LaSb9W21O86](16-), [LaAs4W40O140](25-) and alpha-, beta-[(CeO)(3) . (SiW9O34)(2)](14-) complexes, Tungsten NMR studies showed that the C-s symmetry of the square antiprism for [La(ASW(11)O(39))(2)](11-) and [La(As2W17O61)(2)](17-) anions keep constant in aqueous solution; the lanthanide accupied the central S-1 site in [LnSb(9)W(21)O(86)](16-) and [LnAs(4)W(40)O(140)](25-) complexes, respectively, and lanthanide metal cations gave [(CeO)(3) . (SiW9O34)(3)](14-) type of complexes with SiW9O3410-.

稀土杂多化合物在溶液中的￣（183）W核磁共振表征

~（１８３）Ｗ核磁共振研究确认，Ｌａ（ＡｓＷ_（１１））_２、Ｌａｍ（Ａｓ_２Ｗ_（１７））_２在溶液中仍保持其四方反棱柱的Ｃ_３结构，Ｌａ（ＳｉＷ_９ＭＯ_２）_２阴离子中，２个Ｍｏ原子取代了２个等价的Ｗ原子，在穴状杂多阴离子ＬｎＡｓ_４Ｗ_（１０）和ＬｎＳｂ_９Ｗ_（２１）中，稀土离子占据中心Ｓ_１位置，ＳｉＷ_９与稀土离子生成（ＬｎＯ）_３（ＳｉＷ_９）_２型杂多阴离子。

Dawson结构钨铌磷杂多配合物~（183）WNMR谱的研究

Ｄａｗｓｏｎ结构钨铌磷杂多配合物~（１８３）ＷＮＭＲ谱的研究龚剑，瞿伦玉，陈亚光，李宝利（东北师范大学化学系，长春１３００２４）张建国（中国科学院长春应用化学研究所，长春１３００２２）关键词：Ｄａｗｓｏｎ结构杂多配合物，钨铌磷杂多配合物，~（１８３）Ｗ...

Dawson结构杂多阴离子~（183）W NMR谱的研究──“极位”W原子~（183）W NMR谱化学位移值的预测

本文研究了Ｄａｗｓｏｎ结构取代原子数与相应的１８３ＷＮＭＲ谱中“极位’Ｗ原子的化学位移值间的关系，预测广α－１，２－［Ｐ２Ｗ１６Ｎｂ２Ｏ６２］８－α－１－２，３－［Ｐ２Ｗ１５ＭｏＮｂ２Ｏ６２］８－“极位”Ｗ原子１８３ＷＮＭＲ谱化学位移们，结果α－１，２－［Ｐ２Ｗ１６Ｎｂ２Ｏ６２］８－中与取代Ｎｂ相连“极位”Ｗ原子的化学位移值为－８８ｐｐｍ，与取代Ｎｂ书对称“极位”Ｗ原了的化学位移值为－１４４．７ｐｐｍ，与取代Ｎｂ不对称“极位”Ｗ原子的化学位移值为－１３０．５ｐｐｍ，α－１－２，３－［Ｐ２Ｗ１５ＭｏＮｂ２Ｏ６２］８－中与取代Ｍｏ对称“极位”Ｗ原子的化学位移值为－１３４．７ｐｐｍ，与取代Ｎｂ对称“极位”Ｗ原子的化学位移值为－１４５．６ｐｐｍ．

Dawson结构钨铌磷杂多配合物~(183)W NMR谱的研究

过渡金属离子取代的杂多钨酸盐,具有金属叶啉的类似结构,在烯烃环氧化反应中具有比金属叶啉更优异的催化活性和选择性,特别重要的是其抗氧化性能强,在烯烃基质存在下比金属叶啉稳定,催化寿命持久,并称其为无机金属叶啉,因而引起人们的极大关注.

The relationship of SIF between plate and plane fracture problems and the effect of the plate thickness on SIF

In the present paper, it is shown that the zero series eigenfunctions of Reissner plate cracks/notches fracture problems are analogous to the eigenfunctions of anti-plane and in-plane. The singularity in the double series expression of plate problems only arises in zero series parts. In view of the relationship with eigen-values of anti-plane and in-plane problem, the solution of eigen-values for Reissner plates consists of two parts: anti-plane problem and in-plane problem. As a result the corresponding eigen-values or the corresponding eigen-value solving programs with respect to the anti-plane and in-plane problems can be employed and many aggressive SIF computed methods of plane problems can be employed in the plate. Based on those, the approximate relationship of SIFs between the plate and the plane fracture problems is figured out, and the effect relationship of the plate thickness on SIF is given.

The effect of nucleation time on the growth of a microvoid in a viscoelastic material

In this paper, discussions are focused on the growth of a nucleated void in a viscoelastic material. The in situ tensile tests of specimens made of high-density polyethylene, filled with spherical glass beads (HDPE/GB) are carried out under SEM. The experimental result indicates that the microvoid nucleation is induced by the partially interfacial debonding of particles. By means of the Laplace transform and the Eshelby's equivalent inclusion method, a new analytical expression of the void strain at different nucleation times is derived. It can be seen that the strain of the nucleated void depends not only on the remote strain history, but also on the nucleation time. This expression is also illustrated by numerical examples, and is found to be of great usefulness in the study of damage evolution in viscoelastic materials.

Nonuniformity Effect of Surface-Nanocrystalline Materials in Nanoindentation Test

In the present research, microstructures of the surface-nanocrystalline Al alloy material are observed and measured based on the transmission electron microscopy (TEM) technique, and the corresponding mechanical behaviors are investigated experimentally and theoretically. In the experimental research, the nanoindentation test method is used, and the load and microhardness curves are measured, which strongly depend on the grain size and grain size nonuniformity. Two kinds of the nanoindentation test methods are adopted: the randomly selected loading point method and the continuous stiffness method. In the theoretical modeling, based on the microstructure characteristics of the surface-nanocrystalline Al alloy material, a dislocation pile-up model considering the grain size effect and based on the Mott theory is presented and used. The hardness-indent depth curves are predicted and modeled.

海底管道沉降特性的数值模拟分析

本文给出了一种模拟海底管道沉降的有限元分析方法.在该方法中,海床土体采用弹塑性帽盖本构模型进行模拟;管土接触面采用‘接触对'(contact pair)算法进行处理,解决了管道嵌入海床的动边界接触问题.数值模拟显示,随着管道水下重量的增大,管道下方土体的塑性区域逐渐扩展,相应的管道沉降量也逐渐增大,并明显高于弹性模型的计算值.通过参量分析,还探讨了土体和管道特性对管道沉降量的影响.

The damage evaluation of rigid particle filled polymer

In this paper, the rigid particle filled polymer is studied in the hope to understand the real damage mechanisms. Two damage parameters were introduced and measured. One is the macro-damage of the materials calculated from the modulus measured, another is micro-damage describing the interfacial debonding or the percentage of the particle debonded from the matrix. The damage rate of the macro damage decreases, while the micro damage increases with the applied stress.

On failure modes and strength characterization of brittle disordered materials under uniaxial compression and tension

With a newly developed Material Failure Process Analysis code (MFPA(2D)), influence of hetero geneity on fracture processes and strength characterization of brittle disorder materials such as rock or concrete is numerically studied under uniaxial compression and tension conditions. It is found th at, due to the heterogeneity of the disordered material, relatively more diffused micro-fractures appear in the early stage of loading. Different from homogeneous materials such as glass, macro-crack nucleation starts well before the peak stress is reached and the crack propagation and coalescence can be traced, which can be taken as a precursory to predict the macro-fracture of the material. The presence of residual strength in the post-peak region and the resemblance in the stress-strain curves between tension and compression are significant results and are found to be dependent on the heterogeneity of the specimens. Examples showing the tentative applications of MFPA(2D) in modeling failure of composite materials and rock or civil engineering problem are also given in this paper.