Crack Tip Field and J-Integral with Strain Gradient Effect

The mode I plane strain crack tip field with strain gradient effects is presented in this paper based on a simplified strain gradient theory within the framework proposed by Acharya and Bassani. The theory retains the essential structure of the incremental version of the conventional J_2 deformation theory No higher-order stress is introduced and no extra boundary value conditions beyond the conventional ones are required. The strain gradient effects are considered in the constitutive relation only through the instantaneous tangent modulus. The strain gradient measures are included into the tangent modulus as internal parameters. Therefore the boundary value problem is the same as that in the conventional theory Two typical crack Problems are studied: (a) the crack tip field under the small scale yielding condition induced by a linear elastic mode-I K-field and (b) the complete field for a compact tension specimen. The calculated results clearly show that the stress level near the crack tip with strain gradient effects is considerable higher than that in the classical theory The singularity of the strain field near the crack tip is nearly equal to the square-root singularity and the singularity of the stress field is slightly greater than it. Consequently, the J-integral is no longer path independent and increases monotonically as the radius of the calculated circular contour decreases.

基于LBM方法的高速列车空气动力学计算

利用格子波尔兹曼方法计算了高速列车的空气动力学问题.计算采用真实非简化列车几何,千万量级空间网格.不同工况的结果均真实反应实际情况,表明格子波尔兹曼方法在实际工程计算中有非常广阔的应用空间.

Method for measuring the lateral aberrations of a lithographic projection system with mirror-symmetric FOCAL marks

A novel method for measuring the imaging quality of a projection system with mirror-symmetric FOCAL marks is proposed, and the principle of the method is described. Through experiments, it is demonstrated that not only the axial aberrations but also the lateral aberrations can be measured with high accuracy by the method. The advantages of the method include obtaining more aberrations than the FOCAL technique and making it much simpler to perform a full-scale measurement of the imaging quality of a lithographic projection system. (C) 2006 Society of Photo-Optical Instrumentation Engineers.

一种电刺激噪声消除仪

本发明公开了一种电刺激噪声消除仪，包括两根用于采集生物电信号的微电极，所述微电极的信号输出端经噪声抑制电路后输出，所述噪声抑制电路包括差分放大电路和电阻电容补偿电路，所述微电极采集的电信号经电阻电容补偿电路，分别输入差分放大电路的两个输入端，经差分放大之后输出。利用本发明所述电刺激噪声(伪迹)消除仪，可以消除大于生物电信号本身约40倍以上的电刺激噪声，从而有利于实现将电刺激和单位放电记录这两项重要的神经电生理研究技术有机的结合起来，对神经电生理的研究具有积极的促进作用。

用微卫星指纹识别天鹅洲保护区长江江豚个体

DNA指纹个体识别技术是保护遗传学研究中的一种非常重要的手段。为了准确地识别天鹅洲保护区中的每一头长江江豚以开展保护遗传学及其它相关研究 ,并实施有效的种群管理 ,本研究应用 4个微卫星座位初步构建了该群体的DNA指纹图谱 ,并利用此图谱成功地对不同时期在保护区捕获的江豚进行了个体识别研究。结果显示微卫星指纹技术是一种适用于长江江豚个体识别研究的可靠手段

DCT变换域乘嵌入图像水印的检测算法

目前大多数水印算法采用线性相关的方法检测水印，但是，当原始媒体信号不服从高斯分布，或者水印不是以加嵌入方式嵌入到待保护的媒体对象中时，该方法存在一定的问题．数字水印的不可感知性约束决定了水印检测是一个弱信号检测问题，利用这一特性，首先从图像DCT（discrete cosine transfom）交流变换系数的统计特性出发，应用广义高斯分布来建立其统计分布模型，然后将水印检测问题转化为二元假设检验问题，以非高斯噪声中弱信号检测的基本理论作为乘嵌入水印的理论检测模型，推导出优化的乘嵌入水印检测算法，并对检测算法进行了实验．结果表明，对于未知嵌入强度的乘水印的盲检测，提出的水印检测器具有良好的检测性能．因此，该检测器能在数字媒体数据的版权保护方面得到了实际的应用．

琼东南盆地新生代发育机制的模拟研究

琼东南盆地是南海西北陆缘上一个北东走向的伸展裂陷带,向西与北西走向的莺

长白山赤杨丛枝菌根真菌多样性的半巢式LP-PCR-SSCP检测分析

利用半巢式LP PCR SSCP技术 ,对中国吉林长白山不同海拔生境下 3种赤杨共生丛枝菌根真菌的多样性进行检测分析 .结果表明 ,该地区赤杨属东北赤杨、西伯利亚赤杨及色赤杨共生丛枝菌根真菌在科乃至种的水平上并未随宿主的变化表现出丰富的多样性 ;3个树种在自身属的水平上与共生的球囊霉科 (Glomaceae)至少 1种AMF ,即G .intraradix ,在种的水平上表现出不相关于宿主海拔高度的某种相互选择性 .

聚氨基黑10B/Nafion修饰电极上多巴胺的检测

用电化学聚合法制备了聚氨基黑10B/Nafion修饰电极,利用循环伏安法研究了多巴胺在此修饰电极上的电化学行为。在磷酸盐缓冲溶液(pH6.0)中,多巴胺在修饰电极上呈现可逆的氧化还原峰。其峰电位都随pH值的增加而负移。多巴胺氧化还原峰电流与其浓度在0.2～30μmol/L范围内呈良好的线性关系;检出限为1.0×107mol/L。实验结果表明:本修饰电极具有良好的重现性、稳定性和较强的抗干扰能力。将此修饰电极用于多巴胺注射液和小牛血清中多巴胺的检测,结果令人满意。

Solvent Vapor-Induced Self Assembly and its Influence on Optoelectronic Conversion of Poly(3-hexylthiophene): Methanofullerene Bulk Heterojunction Photovoltaic Cells

Nanoscale-phase separation of electron donor/acceptor blends is crucial for efficient charge generation and collection in Polymer bulk heterojunction photovoltaic cells. We investigated solvent vapor annealing effect of poly(3-hexylthiophene) (P3HT)/methanofullerene (PCBM) blend oil its morphology and optoelectronic properties. The organic solvents of choice for the treatment have a major effect oil the morphology of P3HT/PCBM blend and the device performance. Ultraviolet-visible absorption spectro,;copy shows that specific solvent vapor annealing can induce P3HT self-assembling to form well-ordered structure; and hence, file absorption in the red region and the hole transport are enhanced. The solvent that has a poor Solubility to PCBM Would cause large PCBM Clusters and result in a rough blend film. By combining an appropriate solvent vapor treatment and post-thermal annealing of the devices, the power conversion efficiency is enhanced.