内旋流流经床中气泡运动规律研究

利用摄机相研究了内旋流流化床固相流场及气泡特性，表明：非均匀布风是形成内旋流的关键最佳高风区，低风区流化倍率为初始流化速度的６倍和１.５倍；随着气泡的上升，其体积不断增大；…

Short-and resonant-range interactions between scales in turbulence and their applications

Interactions between different scales in turbulence were studied starting from the incompressible Navier-Stokes equations. The integral and differential formulae of the short-range viscous stresses, which express the short-range interactions between contiguous scales in turbulence, were given. A concept of the resonant-range interactions between extreme contiguous scales was introduced and the differential formula of the resonant-range viscous stresses was obtained. The short- and resonant-range viscous stresses were applied to deduce the large-eddy simulation (LES) equations as well as the multiscale equations, which are approximately closed and do not contain any empirical constants or relations. The properties and advantages of using the multiscale equations to compute turbulent flows were discussed. The short-range character of the interactions between the scales in turbulence means that the multiscale simulation is a very valuable technique for the calculation of turbulent flows. A few numerical examples were also given.

Comparative observation of Ar, Ar-H-2 and Ar-N-2 DC arc plasma jets and their arc root behaviour at reduced pressure

Results observed experimentally are presented, about the DC arc plasma jets and their arc-root behaviour generated at reduced gas pressure without or with an applied magnetic field. Pure argon, argon-hydrogen or argon- nitrogen mixture was used as the plasma-forming gas. A specially designed copper mirror was used for a better observation of the arc-root behaviour on the anode surface of the DC non-transferred arc plasma torch. It was found that in the cases without an applied magnetic field, the laminar plasma jets were stable and approximately axisymmetrical. The arc-root attachment on the anode surface was completely diffusive when argon was used as the plasma-forming gas, while the arc-root attachment often became constrictive when hydrogen or nitrogen was added into the argon. As an external magnetic field was applied, the arc root tended to rotate along the anode surface of the non-transferred arc plasma torch.

论陀螺的迴转稳定准则及其应用

本文以卡尔丹角为方位参量,建立了轴对称刚体(陀螺)永久转动情形的非线性稳定方程组。应用直接方法证明了具有完全耗散情形的陀螺迴转稳定准则:陀螺绕对称轴自由迴旋稳定的充要条件是转子呈扁形。这一准则不仅为陀螺仪设计提供理论依据,而且为飞行器用自旋稳定实现姿态控制提供理论依据。美国发射的Fxplorer-1号绕长轴自旋失稳和第一颗通讯卫星Syncon号绕短轴自旋取得姿态控制成功的事实都能依据这一准则得到合理解释。

磁化非均匀等离子体的圆柱波导中的横电波

本文研究了有外加纵向磁场时,非均匀等离子体圆柱波导中的横电波,得到了把超几何级数进行截断而形成多项式所表出的横电波的解析解,并求出了横电波的本征频率。

有关压力传感器动态校准和动态性能评价的几个问题

在本文中,作者根据简单的线性系统分析和实践中的体会,对压力传感器的动态校准和动态性能的评价提出下列几点看法:(1)阶跃压力是较理想的动态校准压力源;激波管可以作为标准动态压力标准装置(微压传感器除外)。(2)压力传感器的主要动态性能指标为:上升时间、超调量、振荡频率或谐振频率、冲击加速度灵敏度。(3)压力传感器的校准可采用静态校准和动态校准相结合的方法,没有必要在整个量程范围内进行动态校准。用“动态灵敏度”来概括压力传感器的动态性能是不确切的。

平晶型激光错位干涉仪及其在流场测量中的应用

仪器的原理是将一束激光经扩束后通过被测系统,然后在平晶前后表面反射而获得干涉图.仪器防振性能好,可以方便地对横向与纵向尺寸都较大的流场进行测量,光源亮度高,结构简单,调整使用方便,有希望在流场测量特别是超声速流场测量中获得广泛的应用.

Fatigue-crack closure measurements on 2024-t3 sheet specimens

A computer-controlled procedure has been developed for automatic measurement of the crack opening stress S-op during fatigue tests. A crack opening displacement gauge (GOD meter) is used to obtain digital data on the load versus COD curves. Three methods for deriving S-op from the data sets are compared: (1) a slope method, (2) a tangent lines intersecting method, and (3) a tangent point method. The effect of the position of the COD meter with respect to the crack tip on S-op is studied in tests of 2024-T3 specimens. Results of crack growth and S-op are presented for CA loading with an overload, and with an overload followed by an underload.

Experimental and theoretical study on numerical density evolution of short fatigue cracks

Fatigue testing was performed using a kind of triangular shaped specimen to obtain the characteristics of numerical density evolution for short cracks at the primary stage of fatigue damage. The material concerned is a structural alloy steel. The experimental results show that the numerical density of short cracks reaches the maximum value when crack length is slightly less than the average grain diameter, indicating grain boundary is the main barrier for short crack extension. Based on the experimental observations and related theory, the expressions for growth velocity and nucleation rate of short cracks have been proposed. With the solution to phase space conservation equation, the theoretical results of numerical density evolution for short cracks were obtained, which were in agreement with our experimental measurements.

A finite-element analysis of viscoelastically damped sandwich plates

A finite element analysis associated with an asymptotic solution method for the harmonic flexural vibration of viscoelastically damped unsymmetrical sandwich plates is given. The element formulation is based on generalization of the discrete Kirchhoff theory (DKT) element formulation. The results obtained with the first order approximation of the asymptotic solution presented here are the same as those obtained by means of the modal strain energy (MSE) method. By taking more terms of the asymptotic solution, with successive calculations and use of the Padé approximants method, accuracy can be improved. The finite element computation has been verified by comparison with an analytical exact solution for rectangular plates with simply supported edges. Results for the same plates with clamped edges are also presented.

不同形状微管道中的气体流动

不同形状微尺度管道（圆形、六边形、半圆形、不同宽高比的矩形）中的气体流动特性是微机电系统设计最为关心的问题之一．文中利用信息保存（IP）方法和直接模拟Monte Carlo（DSMC）方法进行研究，给出两种方法的计算结果相互符合，并与其它研究者的BGK模型方程计算结果进行了比较．对于微尺度管道中关心的低Mach数流动，IP方法的统计收敛效率明显优于DSMC方法,通过拟合IP和DSMC结果，给出了圆形、六边形、半圆形、不同宽高比的矩形截面情况下无量纲质量流率与等效Knudsen数的关系．

激波风洞中超声速燃烧现象的初步实验研究

介绍了启用激波风洞进行超燃研究所作的改造和得到的初步实验结果。实验除测量常规流场参数和模型表面的动态参数外，主要使用二维实验模型，利用高温气体的自发光和燃烧伴随的发光现象，采用高速摄影技术来观测燃烧现象，记录到高焓流场中叠加燃料喷射和燃烧的流场，观察到自由边界条件下扩散控制的超声速燃烧现象。结果表明激波风洞用于超声速燃烧研究的一些必要的技术问题已基本解决。

纪念谈镐生先生诞辰九十周年暨基础力学学术会议介绍

2006年12月1日是国际著名的力学家、应用数学家谈镐生院士诞辰九十周年纪念日．为纪念谈先生在力学学科的卓越贡献，缅怀他对推动我国力学基础研究和培养科技人才所作出的杰出贡献，中科院力学所于这天上午在所礼堂隆重举行“纪念谈镐生先生诞辰九十周年暨基础力学学术会议”．会前举行了《谈镐生先生文集》首发式，该文集由胡文瑞院士主持编辑，科学出版社出版，收录了谈镐生先生在流体力学、稀薄气体动力学和应用数学研究领域的论文和研究报告26篇，谈先生倡导和推行力学基础研究的有关文章和论述21篇，谈先生的学术活动和生活图片多幅，简介了谈先生生平.

板壳断裂力学

本书阐明了板壳断裂理论的基础。论证了Reissner型板壳断裂理论的科学性、经典板壳断裂理论的缺陷及在一定范围内仍具有的实用价值；介绍了作者所创意的研究Reissner型板壳断裂纹尖端场的方法等。

目录