东北四海龙湾玛珥湖啊1500年来长链烯酮不饱和度温标与古水温重建

The alkenone unsaturation paleothermometer is an important proxy to reconstruct water temperature, and is widely applied to reconstructing sea surface temperature in most oceanographic settings. Recent research indicates that long chain alkenone is preserved in lacustrine sediments, and the alkenone unsaturation has good relationship with mean annual temperature in studied lakes. Thus, the alkenone unsaturation could be used as a temperature proxy to reconstruct temperature in limnic systems. In this study, we analyzed long chain alkenone from the varved sediments in Lake Sihailongwan, northeastern China. Based on the counting varves, we established time scale during the past 1500 years. The distribution pattern in the sediment is similar with the previous study in lacustrine environment. The ratio of C37:4 methyl ketone to the sum of C37 alkenones is high. Based on the published temperature- alkenone unsaturation equation, we reconstructed the mean air temperature and July water temperature during the past 1500 years. Three major cold periods are in AD560-950, AD 1540-1600 and AD1800-1920. Three major warm periods are AD450-550, AD 950-1400 and AD 1600-1800. The Medieval Warm Period was a significant warm periods. However, the traditional “Little Ice Age” was not a persistent cold period, and interrupted by relative longer warm period. The temperature variations in this study show a general similar pattern with the summer temperature reconstruction from Shihua Cave and the winter temperature from historical documents. The temperature variations from long chain alknone record show a good agreement with solar activity (10Be data from ice core and sunspot number from tree rings). It may suggest that solar activity is most important forcing in the studied area.

Investigation of kerosene combustion characteristics with pilot hydrogen in model supersonic combustors

Experimental investigations on the ignition and combustion stabilization of kerosene with pilot hydrogen in Mach 2.5 airflows were conducted using two test combustors, with cross sections of 30.5 x 30 and 51 x 70 mm, respectively. Various integrated modules, including the combinations of different pilot injection schemes and recessed cavity flameholders with different geometries, were designed and tested. The stagnation pressure of vitiated air varied within the range of 1.1-1.8 NiPa, while the stagnation temperature varied from 1500 to 1900 K. Specifically, effects of the pilot hydrogen injection scheme, cavity geometry, and combustor scaling on the minimally required pilot hydrogen equivalence ratio were systematically examined. Results indicated that the cavity depth and length had significant effects on the ignition and flameholding, whereas the slanted angle of the aft wall was relatively less important. Two cavities in tandem were shown to be a more effective flameholding mechanism than that with a single cavity. The minimally required pilot hydrogen equivalence ratio for kerosene ignition and stable combustion was found to be as low as 0.02. Furthermore, combustion efficiency of 80% was demonstrated to be achievable for kerosene with the simultaneous use of pilot hydrogen and a recessed cavity to promote the ignition and global burning.

Effect of Cold Rolling Ratio and Heating Rate of Batch Annealing on Textures of Micro-Carbon Steel Sheet

在四辊冷轧试验机和Gleeble-1500试验机上进行了热轧微碳钢板的冷轧和退火试验。用D/max-RC衍射仪测量了试样的,/”层织构,并用Roe软件进行了ODF分析。研究表明,所研究的热轧微碳深冲板压下率约为75%,退火升温速度为20-40℃/h时,试样为{111}织构特征；压下率较大(80%)时,退火织构为较弱的{111}组分。无论{111}织构还是非{111}织构都是在形核阶段开始形成,在晶粒长大优先长大,受到定向形核和选择生长双重机制的作用。

Plastic constitutive behavior of short-fiber/particle reinforced composites

A cylindrical cell model based on continuum theory for plastic constitutive behavior of short-fiber/particle reinforced composites is proposed. The composite is idealized as uniformly distributed periodic arrays of aligned cells, and each cell consists of a cylindrical inclusion surrounded by a plastically deforming matrix. In the analysis, the non-uniform deformation field of the cell is decomposed into the sum of the first order approximate field and the trial additional deformation field. The precise deformation field are determined based on the minimum strain energy principle. Systematic calculation results are presented for the influence of reinforcement volume fraction and shape on the overall mechanical behavior of the composites. The results are in good agreement with the existing finite element analyses and the experimental results. This paper attempts to stimulate the work to get the analytical constitutive relation of short-fiber/particle reinforced composites.

Novel Mechanical Behavior Of Zno Nanorods

A novel stress-strain relation with two stages of linear elastic deformation is observed in [0 0 0 1]-oriented ZnO nanorods under uniaxial tensile loading. This phenomenon results from a phase transformation from wurtzite (WZ, P6(3)mc space group) to a body-centered tetragonal structure with four-atom rings (denoted as BCT-4) belonging to the P4(2)/mnm space group. The analysis here focuses on the effects of nanorod size and temperature on the phase transformation and the associated mechanical behavior. It is found that as size is increased from 19.5 to 45.5 angstrom, the critical stress for nucleation of the transformation decreases by 25% from 21.90 to 16.50 GPa and the elastic moduli of the WZ- and BCT-4-structured nanorods decrease by 24% (from 299.49 to 227.51 GPa) and 38% (from 269.29 to 166.86 GPa), respectively. A significant temperature effect is also observed, with the critical stress for transformation initiation decreasing 87.8% from 17.89 to 2.19 GPa as temperature increases from 300 to 1500 K. (c) 2007 Elsevier B.V. All rights reserved.

Formation, microstructure and development of the localized shear deformation in low-carbon steels

An investigation has been made into the effect of microstructural parameters on the propensity for forming shear localization produced during high speed torsional testing by split Hopkinson bar with different average rates of 610, 650 and 1500 s(-1) in low carbon steels. These steels received the quenched, quenched and tempered as well as normalized treatments that provide wide microstructural parameters and mechanical properties. The results indicate that the occurrence of the shear localization is susceptible to the strength of the steels. In other words, the tendency of the quenched steel to form a shear band is higher than that of the other two steels. It is also found that there is a critical strain at which the shear localization occurs in the steels. The critical strain value is strongly dependent on the strength of the steels. Before arriving at this point, the material undergoes a slow work-hardening. After this point, the material suffers work-softening, corresponding to a process during which the deformation is gradually localized and eventually becomes spatially correlated to form a macroscopic shear band. Examinations by SEM reveal that the shear localization within the band involves a series of sequential crystallographic and non-crystallographic events including the change in crystal orientation, misorientation, generation and even perhaps damage in microstructures such as the initiation, growth and coalescence of the microcracks. It is expected that the sharp drop in the load-carrying capacity is associated with the growth and coalescence of the microcracks rather than the occurrence of the shear localization, but the shear localization is seen to accelerate the growth and coalescence of the microcracks. The thin foil observations by TEM reveal that the density of dislocations in the band is extremely high and the tangled arrangement and cell structure of dislocations tends to align along the shear direction. The multiplication and interaction of dislocations seems to be responsible for work-hardening of the steels. The avalanche of the dislocation cells corresponds to the sharp drop in shear stress at which the deformed specimen is broken. Double shear bands and kink bands are also observed in the present study. The principal band develops first and its width is narrower than that of the secondary band.

Microstructure of shear localization in low-carbon ferrite pearlite steel

A study has been made of the microstructure of the thermally assisted band in a low carbon ferrite-pearlite steel, resulting from high speed torsional testing with an average strain rate of about 1500 s−1. Metallographic examination showed that there are several fine shear bands distributed over a deformed region (the gauge length of the specimen). The width of these bands is estimated to be of the order of magnitude of 50 μm, and the spacing between them is roughly about 100 μm. Detailed scanning electron microscopy studies indicate that damage of the microstructure within the band is very apparent, as evidenced by microcrack initiation and coalescence along the shear deformation band. However, there is no evidence that the material in the band had become microcrystalline or non-crystalline.

钢管混凝土中长柱轴压非线性响应的数值模拟分析

钢管混凝土(CFST)中短柱的轴压变形伴随着物理非线性过程,试验证实:对长径比(L／D)为2.0—5.0的中短柱而言,轴向压应变达到1500με—1800με时,轴压响应曲线即由弹性阶段转入弹塑性非线性阶段;非线性阶段的不同响应特性决定着结构的不同模式。本文在建立CFST结构的组合模型的基础上,基于应力功率等效原理,导出表观本构方程式,应用非线性结构分析程序,完成了轴压非线性响应的数值模拟分析。计算结果表明:CFST结构的表观响应特性主要取决于结构的几何条件、材料的物理性质及加载方式。数值计算与理论结果,取得了较好的一致。

微/纳米氧化锌（ZnO）的生长、性质及其应用研究

纳米氧化锌（ZnO）是一种直接宽带隙半导体材料，室温下其禁带隙宽为本3.37 eV，激子束缚能为60 meV。纳米ZnO有明显的尺寸效应、表面和界面效应等，物理化学性能优越。在压电材料、铁电材料、平面显示、表面声波、传感器、场发射器件、激光、光催化等方面有着广泛的用途。近年来，对纳米ZnO材料的研究成为国内外的一个热点。 本论文研究了用化学气相沉积（CVD）法制备微/纳米ZnO材料。通过控制实验条件，合成了多种特殊结构和形貌的微/纳米ZnO材料，并用扫描电子显微镜（SEM）、高分辨率透射电镜（HR-TEM）、X-射线衍射仪（XRD）、Raman光谱和光致发光（PL）等对材料的结构和光学性能进行了表征。采用CVD法，在温度为630 °C，氧气流量为15 sccm，氩气流量为300 sccm的条件下，制备了一种纳米带冠四足状ZnO（T-ZnO）。此结构ZnO材料的每根足顶端均有一规则的六方帽形结构，具有很大的比表面积。实验结果表明：合成的ZnO材料为纤维锌矿结构单晶，并且沿着(0001)方向生长；室温下的PL谱有两个激发峰，一个是在393 nm处相对较弱的近带紫外峰，另一个是在511 nm处强峰。而材料在600 °C下氧气中退火30 min后，511 nm附近的绿光激发辐射峰则基本消失了，这说明在511 nm处的绿光激发辐射峰可能是由于氧空位引起的。此外，通过改变实验条件，还得到了其他多种结构的微/纳米ZnO材料。 通过大量实验，找到了一种在低温下合成微/纳米ZnO材料的新方法，即水蒸气氧化法。用ZnI2作为锌源，水蒸气作为氧化剂，实验温度在300～500 °C范围内，大大低于通常CVD法的500～1500 °C。采用此法，用硅做基底，得到了一系列有趣的实验结果，大多数情况下ZnO纳米晶自组装成很规则的圆。而在瓷舟中收集到的纳米ZnO跟普通CVD法结果相似，可以得到锥状、棒状等结构的纳米晶，但其生长方式与硅基底上的有很大差别。此外，用水蒸气氧化法，还实现了ZnO纳米晶在碳纳米管（CNTs）上的直接生长，而且其PL性能增强，这可能是纳米ZnO和CNTs相互耦合的结果。在700 °C温度下，以锌粉和ZnI2作为锌源，用水蒸气作为氧化剂，在硅基底的正反面分别得到了纳米棒和纳米推子阵列。此外，还对水蒸气氧化法的化学反应机理进行了分析，实验结果证明：固态ZnI2在受热和一定真空度下先蒸发成ZnI2分子，ZnI2分子遇到水蒸气发生反应生成偶极ZnO分子，这些ZnO偶极分子在硅基底上通过静电力自组装成特殊的几何形状。 此外，还通过分子动力学模拟的方法，对材料的力学性能进行了研究，得到了ZnO的弹性常数和体弹性模量，模拟值跟其他研究人员的实验和模拟结果吻合得很好，并估出算了ZnO晶体的表面能和断裂韧性。 本论文还对制备材料的光催化性能进行了系统的研究，采用CVD法制备ZnO，对铬黑T（EBT）进行光催化降解实验。通过正交实验方法，得到了ZnO催化降解EBT的最佳工艺条件，即催化剂用量为5 g/L，光照强度为120 W，反应温度为20 °C，反应时间为120 min，EBT浓度为10 mg/L，溶液pH值为4。 在最佳实验条件下，20分钟内有95%的EBT被降解完，30分钟内则全部降解。因此，ZnO在EBT的降解中催化效率很高，在废水处理中具有潜在的应用前景。

不同长度β_2整合素_M亚基与ICAM-1的亲和性比较

国家自然科学基金项目(30730032/10702075)

Formation of X-waves at fundamental and harmonics by infrared femtosecond pulse filamentation in air

We experimentally observe the formation of X-waves at fundamental, third harmonic, and fifth harmonic wavelengths by infrared (central wavelength at similar to 1500 nm) femtosecond laser pulse filamentation in air. By fitting the angularly resolved spectra of the fundamental and harmonic waves using X-wave relations, we confirm that all the X-waves have nearly the same group velocity, indicating that they are locked in space and time during their propagation in filament.

Bi-doped BaF2 crystal for broadband near-infrared light source

Bi-doped BaF2 crystal was grown by the temperature gradient technique and its spectral properties were investigated. The absorption, emission and excitation spectra were measured at room temperature. Two broadband emissions centered at 1070 and 1500 nm were observed in Bi-doped BaF2 crystal. This extraordinary luminescence should be ascribed to Bi-related centers at distinct sites. We suggest Bi2+ or Bi+ centers adjacent to F vacancy defects are the origins of the observed NIR emissions. (C) 2009 Optical Society of America