All solid-state, injection-seeded Ti:sapphire ring laser

In this letter, we present an all solid-state, injection-seeded Ti:sapphire laser. The laser is pumped by a laser diode pumped frequency-doubled Nd:YAG laser, and injection-seeded by an external cavity laser diode with the wavelength between 770 and 780 nm. The single longitude mode and the doubling efficiency of the laser are obtained after injection seeding. The experimental setup and relative results are reported. It is a good candidate laser source for mobile differential absorption lidar (DIAL) system.

The intensity distribution and thermal stability of InnoSlab laser

Partially end-pumped slab laser is an innovative solid state laser, namely InnoSlab. Combining the hybrid resonator with partially end-pumping, the output power can be scaled with high beam quality. In this paper, the output intensity distributions are simulated by coordinate transformation fast Fourier transform (FFT) algorithm, comparing the thermal lens influence. As the simulated curves showed, the output mode is still good when the thermal lens effect is strong, indicating the good thermal stability of InnoSlab laser. Such a new kind of laser can be designed and optimized on the base of this simulation.

Dynamic analysis of V-folded cavity for TEM00 operation of end-pumped solid-state laser

Based on graphic analysis design method of optical resonator, a simple design expression of V-folded cavity of end-pumped solid-state lasers with TEM00 operation is described, which satisfies two criterias of the resonator design. We give numerical simulation of spot size as a function of thermal focal length using this design approach whose advantages are validated experimentally.

Theoretical study on longitudinally pumped Yb3+:Y2O3 lasers

To optimize the performance of longitudinally pumped Yb^(3+):Y2O3 ceramic lasers, cavity parameters such as material length and output coupler transmission at a certain laser output power are calculated numerically using quasi-three-level laser model. The results show great potential of Yb^(3+):Y2O3 ceramics for highly efficient diode-pumped solid-state lasers.

Highly efficient Nd:YAG ceramic CW laser with 59.8% slope-efficiency

In this paper, a highly efficient Ti:sapphire end-pumped 1 at.-% Nd:YAG ceramic laser that is comparable in efficiency with Nd:YAG single crystal lasers has been developed. Optical absorption and emission spectra for Nd:YAG ceramics have been measured. With 673-mW pumping, 295-mW laser output at 1064 nm has been obtained. The laser threshold is only 13 mW. Deducted the transmitted light, the corresponding optical-to-optical conversion efficiency is 58.4%. The lasing characteristics of Nd:YAG ceramic are nearly equal to those of Nd:YAG single crystal.

Laser-diode-pumped Cr4+,Nd3+: YAG with self-Q-switched laser output of 1.4 W

By use of a laser diode as a pump source, a self-Q-switched laser from a Cr,Nd:YAG crystal is demonstrated. The output Q-switched traces are very stable, the threshold pump power is 3.5 W, the pulse duration is 50 ns, and the slope efficiency is as high as 20%. In addition, the pulse width remains constant while the pulse repetition rate Varies with pump power. (C) 2000 Optical Society of America OCIS codes: 140.0140, 140.2020, 140.3380, 140.3480, 140.3540, 140.3580.

Phi 140 mm sapphire crystal growth by temperature gradient techniques and its color centers

Sapphire crystals, 140 mm in diameter and 90 turn in height, have been grown by temperature gradient techniques (TGT). The growth direction of the boule was fixed by means of Lane X-ray diffraction. A prominent 204 nm absorption band in TGT-Al2O3. which does not appear in single crystals grown by Czochralski method has been studied. Analysis further substantiates the F-center model of this band. Two relatively weaker bands absorbing at 232 nm and 254 nm were ascribed to F+ centers. F-type centers concentration was determined using Smakula's equation. (c) 2005 Elsevier B.V. All rights reserved.

~(140)Tb和~(141)Dy的β缓发质子衰变以及~(143)Dy的自旋宇称

利用40Ca+106Cd融合蒸发反应产生了近质子滴线核140Tb和141Dy,配合氦喷嘴带传输系统采用“质子-γ”符合方法观测了它们的β缓发质子衰变,其中包括半衰期、质子能谱和衰变到第二代子核不同低位态的分支比．通过统计理论拟合提取了140Tb和141Dy的基态自旋宇称分别为7±和9／2±．另一方面,用Woods-Saxon Strutinsky方法计算了这两种核限制组态的势能面,由此得到140Tb和141Dy的基态自旋宇称分别为7+和9／2-．此外用同一方法还计算了143Dy的核势能面,从中看出143Dy存在有自旋宇称为1／2+的基态和一个激发能为198keV的11／2-的同质异能态．该结果与2003年Eur．Phys．J． A16:347-351中的143Dy衰变实验数据相符．

双奇核~(140)Pr的高自旋态能级纲图

通过130 Te(14 N ,4n)反应首次对双奇核14 0 Pr进行了在束γ谱学研究 .在实验中进行了γ射线的激发函数、γ射线单谱和γ γ t符合测量 .建立了激发能达 4 717.3keV的14 0 Pr的能级纲图 ,其中包括新发现的 4 2条γ射线和新建立的 2 7个能级 .基于实验测量的γ跃迁各向异性度 ,建议了14 0 Pr部分能级的自旋值 .根据14 0 Pr附近同位素核结构的系统性 ,对部分能级的准粒子组态作了定性的讨论 .

~(130)Nd和~(140)Tb的EC/β~+衰变研究

利用能量为１７０ＭｅＶ左右的３６Ａｒ重离子束轰击９６Ｒｕ和１０６Ｃｄ浓缩同位素靶，分别生成缺中子同位素１３０Ｎｄ和１４０Ｔｂ．借助氦喷嘴带传输系统，用 Ｘ－γ和 γ－γ符合方法，分离鉴别了这两种核素，并进一步测定了它们的衰变性质．得到１３０ Ｎｄ的半衰期为（１３± ３）ｓ，首次建议了它的ＥＣ／β＋衰变纲图，推测了其子核１３０Ｐｒ的基态和低位能级的自旋宇称．修订了１４０Ｔｂ的原有极简单的ＥＣ／β＋衰变纲图并指认１４０Ｔｂ的基态自旋宇称为７＋．