Effects of annealing on the photoluminescence of He ion implanted sapphire after 230-MeV Pb ion irradiation

Single crystal sapphire (Al2O3) samples implanted with 110 keV He and irradiated at 320 K by Pb-208(27), ions with energy of 1.1 MeV/u to the fluences ranging from 1 X 10(12) to 5 X 10(14) ion/cm(2) and subsequently annealed at 600, 900 and 1100 K. The obtained PL spectra showed that emission peaks centred at 375, 390, 413, and 450 nm appeared in irradiated samples. The peak of 390 ran became very intense after 600 K annealing. The peak of 390 nm weakened and 510 nm peak started to build up at 900 K annealing, the peak of 390 nm vanished and 510 nm peak increased with the annealing temperature rising to 1100 K. Infrared spectra showed a broadening of the absorption band between 460 cm(-1), and 510 cm(-1) indicating strongly damaged regions being formed in the Al2O3 samples and position shift of the absorption band at 1000-1300 cm(-1) towards higher wavenumber after Pb irradiation.

Pb isotope shifts in the relativistic mean field theory

The ground state properties of the Pb isotopic are studied by using the axially deformed relativistic mean field (RMF) calculation with the parameter set TM1. The pairing correlation is treated by the BCS method and the isospin dependent pairing force is used. The 'blocking' method is used to deal with unpaired nucleons. The theoretical results show that the relativistic mean field theory with non-linear self-interactions of mesons provides a good description of the binding energy and neutron separation energy. The present paper focus on the physical mechanism of the Pb isotope shifts.

Photoluminescence of inert-gas ion implanted sapphire after 230-MeV Pb ion irradiation

In the present work the photoluminescence (PL) character of sapphire implanted with 110-keV He, Ar or Ne ions and subsequently irradiated with 230-MeV Pb was studied. The implantation was performed at 320 and 600 K using fluences from 5.0 x 10(16) to 2.0 x 10(17) ions/cm(2). The Pb ion irradiation was carried out at 320 K. The obtained PL spectra showed peaks at 375, 413 and 450 nm with maximum intensity at an implantation fluence of 5.0 x 10(16) ions/cm(2) and a new peak at 390 nm appeared in the He-implanted and subsequently Pb-irradiated samples. Infrared spectra showed a broadening of the absorption band between 460 and 510 nm indicating strongly damaged regions formed in the Al2O3 samples. A possible PL mechanism is discussed.

Electron emission induced by the interaction of highly charged ions Pb-207(q+) (24 <= q <= 36) with solid surface of Si(110)

The electron emission induced by highly charged ions Pb-207(q+) (24 <= q <= 36) interacting with Si(110) surface is reported. The result shows that the electron emission yield Y has a strong dependence on the projectile charge state q, incidence angle psi and impact energy E. In fitting the experimental data we found a nearly 1/tan psi dependence of Y. Theoretical analysis shows that these processes are closely related to the process of potential electron emission based on the classical over-the-barrier model.

Cd、Pb、Cu、Zn、As复合污染在农田生态系统的迁移动态研究

１９９０—１９９５年中国科学院生态网站联网研究中，在４个生态站对重金属复合污染（Ｃｄ、Ｐｂ、Ｃｕ、Ｚｎ、Ａｓ）进行了田间迁移动态实验研究，表明３年来表土中重金属元素含量缓慢下降，输出量最大支出项目为从表层向下迁移量可比作物地上部分带去量高出几十至数百倍，为污染土壤防治工作中淋洗技术运用指出了应用前景．

Cd~(2+)、Pb~(2+)在根际和非根际土壤中的吸附-解吸行为

采用1次平衡法对Cd2+、Pb2+在小麦根际和非根际土壤中的吸附-解吸行为进行比较研究.结果表明,根际土对Cd2+和Pb2+的吸附能力高于非根际土,2类土壤对Cd2+的吸附等温线与Freundlich方程有较好的拟合性,Pb2+的等温吸附过程可由Langmuir方程与Freundlich方程来描述.双常数方程是描述根际、非根际土Cd2+和Pb2+吸附动力学行为的最优模型,其次为Elovich方程,最差模型是一级动力学方程.Cd2+、Pb2+的解吸存在滞后现象,相比于非根际土,根际土吸附态Cd2+、Pb2+的解吸率更低,Cd2+、Pb2+的解吸量与其初始吸附量之间的关系符合2次幂方程.2类土壤Cd2+、Pb2+的解吸速率随重金属初始浓度的增加而增加,随解吸时间的延长而不断降低.描述根际和非根际土Cd2+、Pb2+的解吸动力学过程的最优模型均为双常数方程,其次为Elovich方程,一级动力学方程拟合效果不佳.

Cd-Pb复合污染条件下3种花卉植物的生长反应及超积累特性研究

采用水培实验方法,研究了3种耐性较强的花卉植物在Cd-Pb复合污染条件下的生长反应及可能的超积累特性.结果表明,花卉植物种不同,其对复合污染的生长反应也不同,它们的耐性大小顺序为蜀葵(AlthaearoseaCav.)>凤仙花(ImpatiensBalsaminaL.)>金盏菊(CalendulaofficinalisL.);Cd对植物生长的影响较大、Pb的影响相对较小.3种花卉植物对重金属的积累量都是根部大于地上部;蜀葵对重金属Cd具有很强的耐性和积累性,在Cd、Pb复合污染条件下极具植物修复的潜力.对于这3种花卉植物,Cd-Pb相互作用效应与多种因素有关,包括重金属之间的浓度组合、植物种和植株部位等,表现得极为复杂,不仅仅是单纯的加和、拮抗或协同作用.

Determination of lead using a poly(vinyl chloride)-based crown ether membrane

A poly(vinyl chloride)(PVC)-based membrane of 15-crown-5 exhibits a good response for lead(II) ions over a wide concentration range. The response time of the sensor is 30 s and the membrane can be used for more than four months without observing any divergence. The selectivity of the sensor is comparable with those reported for other such electrodes. It was possible to determine lead in polluted waters using this electrode assembly.