~(142)Ce的新激发态及其经验壳模型研究

利用 42 0MeV　82 Se轰击1 39La引起的深部非弹反应和在束γ谱学方法研究了1 4 2 Ce的中高自旋激发态 .识别出了激发能为 2 62 5,2 995和 3 83 4keV的 3个新能级 ,自旋、宇称分别被指定为 8+,9(- ) 和 1 1 (- ) .发现这些能级非常好地符合N=84偶偶核转晕能级的系统性 .利用经验壳模型计算了1 4 2 Ce的中高自旋激发态的激发能 ,计算结果比较好地重现了实验值 .对它们的结构进行了讨论 ,表明在1 4 2 Ce的中高自旋激发态中以单粒子激发为主

~(130)Ce(EC+β~+)衰变研究及其放射化学分离

利用兰州SFC加速的16O束轰击同位素118Sn ,由熔合蒸发 4n反应产生目标核13 0 Ce。为了消除本底干扰并指定13 0 Ce核 ,采用溶剂萃取法对He - jet带传输系统从靶室传输出来的反应产物进行了离线分离与纯化。将目标核13 0 Ce从大量的靶材料、反应产物及母核中分离出来 ,快速制成薄源后在铅室中进行γ单谱测量及X -γ、γ -γ符合测量。从化学分离后的产物中观察到了半衰期为 2 2 .9min的 10 8条γ射线 ,其中 10 7条是新发现的 ,该活性被指定为13 0 Ce。在此基础上 ,进一步研究这些γ线的级联关系 ,建立了缺中子同位素13 0 Ce较完整的 (EC + β+ )衰变纲图。为118Sn(16O ,4n) 13 0 Ce反应体系建立的放化分离流程的分离时间仅 10min ,化学产额大于70 %。化学分离除去 98%以上的核反应生成的13 0 La ,对其它杂质的去污完全满足13 0 Ce(EC + β+ )衰变研究的要求。

缺中子核素~(129)Ce的(EC/β~+)衰变

利用 10 2MeV16O6+束轰击同位素靶117Sn ,通过熔合蒸发 4n反应产生核素12 9Ce.由氦喷嘴快速带传输系统将反应产物送到低本底区 .通过化学分离来制备待测的Ce样品 ,与此同时用16O束轰击117Sn的两种相邻的同位素靶118Sn和116Sn ,并比较上述 3种反应中的产物来进一步区分元素Ce的不同的同位素 .结果一种半衰期为 4.1min的活性被鉴定为12 9Ce.基于X -γ -t和γ -γ -t符合测量 ,建议了包括 5 1条射线在内的12 9Ce的 (EC/ β+)衰变纲图 .其中 ,12 9Ce基态直接馈送到12 9La基态的份额 ( 2 6± 7) %是用观测到的12 9La衰变的 2 78.6keV的γ射线的生长和衰变曲线估计出来的 .另外还给出了用La Kα X射线和6 8.2keVγ射线开门的γ谱以及典型的衰变γ射线的时间谱

Multi-quasiparticle gamma-band structure in neutron-deficient Ce and Nd isotopes

The newly developed multi-quasiparticle triaxial projected shell model approach is employed to study the high-spin band structures in neutron-deficient even-even Ce- and Nd-isotopes. It is observed that gamma-bands are built on each intrinsic configuration of the triaxial mean-field deformation. Due to the fact that a triaxial configuration is a superposition of several K-states, the projection from these states results in several low-lying bands originating from the same intrinsic configuration. This generalizes the well-known concept of the surface gamma-oscillation in deformed nuclei based on the ground-state to gamma-bands built on multi-quasiparticle configurations. This new feature provides an alternative explanation on the observation of two I = 10 aligning states in Ce-134 and both exhibiting a neutron character. (C) 2009 Elsevier B.V. All rights reserved.

Study of multi-quasiparticle excited states in Ce-139

High-spin states in Ce-139 have been populated using the Te-130(C-12, 3n) reaction at beam energy of 50MeV. The level scheme of Ce-139 has been revised and extended greatly up to E=5765.0keV. The level structure of Ce-139 shows typical characteristics of spherical nucleus, and the high-spin states were formed by the excitations of valence nucleons. Energies of the yrast and near yrast high-spin states in Ce-139 have been calculated by the empirical shell model, and the multi-quasiparticle nature of high-spin excited states has been discussed.

Effects of rare earth on the structure and properties of Mg–6Zn–5Al–4Gd–1RE (RE = Ce or Y) alloys

The microstructures and mechanical properties of Mg-6Zn-5Al-4Gd-1RE (RE = Ce or Y) alloys were investigated. The addition of Ce or Y obviously refines the grain size for the Mg-6Zn-5Al-4Gd-based alloy, while the Y element has a better refining effect. The Ce and Y show different grain-refining mechanisms: Ce addition mostly promotes the growth of secondary dendrite, while Y addition mainly increases the heterogeneous nucleation sites.

BaYF_5:Ce~(3+)纳米粒子的制备与光谱性质

在水/十六烷基三甲基溴化铵(CTAB)/正丁醇/正辛烷微乳液体系中成功的合成了BaYF5:Ce3+纳米粒子。运用X射线衍射(XRD)、环境扫描电子显微镜(ESEM)和荧光光谱等测试技术对所制备产物进行了表征。

Effects of doping lanthanide ions in YAG : Ce system on the spectral properties of Ce3+

(Y0.95Ln(0.01)Ce(0.04))(3)Al5O12 phosphors were synthesized by high-temperature solid state reaction under reducing atmosphere and the doping effects of lanthanide ions (Ln(3+)) on the luminescence properties of phosphors were studied. YAG: Ce, Ln spectra of excitation and emission show that the influence between Ce3+ and Ln(3+) can be divided into the following three types

The effect of La or Ce on ageing response and mechanical properties of cast Mg-Gd-Zr alloys

Mg-8Gd-0.6Zr-1RE (RE = La or Ce, wt.%) alloys were prepared by casting. The microstructures, age hardening behavior and mechanical properties were investigated. The results show that the addition of 1 wt.% La or Ce to a Mg-8Gd-0.6Zr alloy reduces the dendrite arm spacing and slightly improves the mechanical properties and age hardening response.

Micro structures, tensile properties and corrosion behavior of die-cast Mg-4Al-based alloys containing La and/or Ce

In order to study the properties of Mg-Al-RE (AE) series alloys, the Mg-4Al-4RE-0.4Mn (RE= La, Ce/La mischmetal or Ce) alloys were developed. Their microstructures, tensile properties and corrosion behavior have been investigated. The results show that the phase compositions of Mg-4Al-4La-0.4Mn alloy consist of alpha-Mg and Al11La3 phases. While two binary Al-RE (RE = Ce/La) phases, Al11RE3 and Al2RE, are formed in Mg-4Al-4Ce/La-0.4Mn alloy, and Al11Ce3 and Al2Ce are formed in Mg-4Al-4Ce-0.4Mn alloy.

Selective synthesis of hexagonal and monoclinic LaPO4:Eu3+ nanorods by a hydrothermal method

The hexagonal and monoclinic LaPO4:Eu3+ nanorods can be selectively synthesized through a simple hydrothermal method by only adjusting the reaction temperature. Hexagonal and monoclinic LaPO4:Eu3+ nanorods can be prepared at 120 and 180 degrees C, respectively. The phase conversion of LaPO4:Eu3+ under different temperatures is investigated in detail. Moreover, the influence of the temperature on the intensity and the shift of the peaks of the excitation and emission spectra is discussed, and the decay lifetime of the Eu3+ ions of the sample obtained at different temperature also have been investigated in this paper.

Enantioseparation of Dioxopromethazine Hydrochloride in Urine with Liquid-Liquid Extraction by CE-ECL Detection

Capillary electrophoresis coupled with electrochemiluminescence detection was developed for the separation and determination of dioxopromethazine hydrochloride (DPZ) enantiomers. Performance parameters of the proposed method were evaluated. An improved separation of DPZ enantiomers could be achieved after adding boric acid to buffer. The enantiomers were completely separated with running buffer of 16.5 mM beta-CD in 25 mM tris-H3PO4-40 mM H3BO3 at pH 2.5. The proposed method was successfully applied to the separation and determination of DPZ enantiomers in human urine with a liquid-liquid extraction procedure.

Synthesis of mesoporous LaPO4 nanostructures with controllable morphologies

Lanthanum phosphate (LaPO4) nanostructures with different morphologies were prepared by a facile solution-precipitation process. The effect of different reaction conditions on the morphology of nanostructures was studied. When the molar ratio of La3+:H3PO4 was around 1 : 2, 1 : 20, 1 : 100, and 1 : 200, four different morphologies, such as near-spherical, snowflake-like, star-shaped, lens-like nanostructures and short nanorods, were obtained, respectively. Meanwhile, similar shapes developed when the molar ratio of H3PO4 to ionic surfactants, such as SDS and CTAB, was varied. In addition, Eu3+ doped and Ce3+/Tb3+ co-doped LaPO4 nanostructures showed morphology evolution similar to undoped LaPO4 nanostructures. The optical properties of these doped LaPO4 were also characterized.