Influence of interface on radiation effects of crystalline polymer - radiation effects on polyamide-1010 containing BMI

Aimed at saving the radiation dose required to crosslinking the polyamid-1010, BMI/PA1010 systems containing different amounts of difunctional crosslinking agent N,N'-bis-maleimide-4,4'-biphenyl methane (BMI) were prepared and the structure changes at the crystallographic and supermolecular levels before and after irradiation were studied by using WAXD, SAXS, and DSC techniques. It was found that by incorporation of BMI the microcrystal size L-100 is lowered due to the formation of hydrogen bond between the carbonyl oxygen of BMI and the amide hydrogen of PA1010 in the hydrogen bonded plane, and the overall crystallinity W-c is also decreased. The presence of BMI causes the crystal lamella thickness d(c) to decrease and greatly thickens the transition zone d(tr) between the crystalline and amorphous regions. As for the irradiated specimen, the maximum increments in the L-100 and W-c against dose curves decrease with BMI content, and the interception point D-i, at which the L-100 and W-c curves intercept their respective horizontal line of L-100/L-100(0) and W-c/W-c(0)=1, shift to lower dose with an increase in BMI concentration. In addition. the mechanism of the radiation chemical reactions in the three different phases under the action of BMI are discussed with special focus on the interface region. (C) 1999 Published by Elsevier Science Ltd. All rights reserved.

Synthesis and characterization of soluble polyimides from 2,2-bis(4-aminophenyl)cycloalkane derivatives

New aromatic diamines [(1) and (2)] containing polycycloalkane structures between two benzene rings were synthesized by HCl-catalyzed condensation reaction of aniline hydrochloride and corresponding polycycloalkanone derivatives. The structures of diamines were identified by H-1-NMR, C-13-NMR, FTIR spectroscopy, and elemental analysis. The polyimides were synthesized from the obtained diamines with various aromatic dianhydrides by one-step polymerization in m-cresol. The inherent viscosities of the resulting polyimides were in the range of 0.34-1.02 dL/g. The polyimides showed good thermal stabilities and solubility. All the polymers were readily soluble in N-methyl-2-pyrrolidone, m-cresol, tetrachloroethane, etc. Some of them were soluble even in chloroform at room temperature. The glass transition temperatures were observed in the range of 323-363 degrees C, and all of the polymers were stable up to 400 degrees C under nitrogen atmosphere. (C) 1999 John Wiley & Sons, Inc.

谷物中噻吩甲氯残留量的气相色谱-质谱测定

应用气相色谱－ 质谱法确证及测定谷物( 糙米、玉米) 中噻吩甲氯的残留含量，试样采用水—丙酮提取，提取液经与石油醚液—液分配后， 再以硅酸镁载体(Florisil)柱净化，气相色谱—质量选择检测器选择离子监测方式(GC-MSD-SIM)进行测定和阳性确证。噻吩甲氯选择监测离子的种类为m/z287、288、323，其丰度比约为46:100:11。采用外标法定量，方法检出限为0.010 ×10-6。

The rheological and extrusion behaviour of blends based on phenolphthalein poly(ether-ether-sulfone) and thermotropic liquid crystalline polymer

A novel engineering thermoplastic, phenolphthalein poly (ether-ether-sulfone) (PES-C) was blended with a commercial thermotropic liquid crystalline polymer(TLCP), Vectra A950, up to 30 weight percent of TLCP. A rheometrics dynamic spectrometer (RDS-I) and a CEAST capillary rheometer, a rheoscope 1000 were employed to investigate the melt rheology and extrusion behaviour at both the low and high shearing rates. The morphologies of the blends under different shearing were observed with a scanning electron microscope(SEM) and correlated to the observed rheology. The principal normal stress differences measured with cone-and-plate geometry give a temperature-independent correlation for both blend and PES-C when they are plotted against shear stress. But the extrudate swell of the blends showed a strong temperature dependence at each shear stress. The concentration dependence of extrudate swell shows a contrary behaviour to that of the inorganic filled system. A reasonable hypothesis based on the relaxation and disorientation of TLCP during flowing in the capillary and exiting was given to explain it. The melt fracture was checked after extrusion from capillary and was discussed.

Effects of La3+ on lipid fluidity land structural transitions in human erythrocyte membranes

The effects of La3+ on the structure and function of human erythrocyte membranes were investigated by fluorescence polarization, spin-labeled electron spin resonance (ESR) and differential scanning calorimetry (DSC). The results showed that increasing concentrations of La3+ inhibited (Na++K+)-ATPase and Mg2+-ATPase activities. La3+ lowered the lipid fluidity of erythrocyte membranes and induced structural transitions in erythrocyte membranes.

High resolution solid-state NMR and DSC study of poly(ethylene glycol) silicate hybrid materials via sol-gel process

Hybrid materials incorporating poly(ethylene glycol) (PEG) with tetraethoxysilane (TEOS) via a sol-gel process were studied for a wide range of compositions of PEG by DSC and high resolution solid-state C-13- and Si-29-NMR spectroscopy. The results indicate that the microstructure of the hybrid materials and the crystallization behavior of PEG in hybrids strongly depend on the relative content of PEG. With an increasing content of PEG, the microstructure of hybrid materials changes a lot, from intimate mixing to macrophase separation. It is found that the glass transition temperatures (T-g) (around 373 K) of PEG homogeneously embedded in a silica network are much higher than that (about 223 K) of pure PEG and also much higher in melting temperatures T-m (around 323 K) than PEG crystallites in heterogeneous hybrids. Meanwhile, the lower the PEG content, the more perfect the silica network, and the higher the T-g of PEG embedded in hybrids. An extended-chain structure of PEG was supposed to be responsible for the unusually high T-g of PEG. Homogeneous PEG-TEOS hybrids on a molecular level can be obtained provided that the PEG. content in the hybrids is less than 30% by weight. (C) 1998 John Wiley & Sons, Inc.

苯酚锰(Ⅲ)四苯基卟啉配合物的合成、光谱性质和催化加氧反应

合成了两种新的化合物Ｃ６Ｈ５ＯＭｎ（Ⅲ）ＴＰＰ和Ｃ６Ｈ５ＯＭｎ（Ⅲ）ＴＰＰ·ＴＨＦ。测定了它们的元素组成、可见吸收光谱、红外光谱和氧化还原电位。发现它们均具有催化氧化环己烯的能力。

CeO_2纳米粒子形成过程中Ce的价态变化

用溶胶凝胶法制备了ＣｅＯ２纳米粒子，ＸＲＤ分析表明，所合成的ＣｅＯ２纳米粒子均为立方晶系，空间群为Ｏ５ｈＦｍ３ｍ。ＴＥＭ分析表明，ＣｅＯ２粒子为球形。研究了ＣｅＯ２纳米粒子形成过程中Ｃｅ价态的变化与性质，发现干凝胶中Ｃｅ３＋和Ｃｅ４＋共存；当焙烧温度低于２３０℃时，随焙烧温度的升高，Ｃｅ３＋含量逐渐降低，Ｃｅ４＋含量逐渐增高，即Ｃｅ３＋缓慢地氧化成Ｃｅ４＋；当焙烧温度高于２３０℃时，Ｃｅ３＋快速氧化成Ｃｅ４＋，至２５０℃时Ｃｅ３＋完全氧化成Ｃｅ４＋。焙烧温度低于２５０℃处理的样品中Ｏ１ｓ的光电子能谱明显不同，反映出样品晶格结构的变化。

PP/LDPE共混体系的辐射效应

研究了在多官能团单体—三烯丙基异氰脲酸酯存在下ＰＰ／ＬＤＰＥ共混体系接受γ－辐射的效果。用溶解度参数和ＴＥＭ技术评估了共混体系的相容性与多官能团单体在共混体系中的分布，并用ＳＥＭ、ＤＳＣ、动态力学等方法对共混体系相容性进行了表征。结果表明，ＰＰ／ＬＤＰＥ是不相容的共混体系，三烯丙基异氰脲酸酯主要分布在共混体系的相界面区域，辐照强化了共混体系的相间结合，增加了界面厚度，改善了共混体系的相容性。

The influence of heat treatment on structures of the aggregated state of polyamide-1010

The structural parameters of the aggregated state of polyamide (PA)-1010 annealed at various temperatures were computed by means of the desmearing intensity from Smalt Angle X-ray Scattering (SAXS) measurements and by using the concept of the distance distribution function. The results indicated that the structural parameters of the aggregated state were strongly dependent upon heat treatment conditions and the maximum values of the structural parameters were obtained for the samples annealed at T = 175 degrees C. The particle size Z annealed at different temperature was ranged between 8.1-12.8nm, and the values of the distance distribution function P-max(Z) were obtained when Z = 4.0-6.8 nm. Using one dimension electron density correlation function (1D EDCF) method long period (L) and thickness of the lamellar (d(0)) were estimated and were found to increase with the increase of the degree of crystallinity.

光折变Ce∶Nd∶LiNbO3晶体用于实时光学图象处理

Ｃｅ：Ｎｄ：ＬｉＮｂＯ３晶体具有优良的光折变性能，它作为全息记录介质，用于实现了光学图象微分和全息关联存储。

SYNTHESIS AND STRUCTURE CHARACTERIZATION OF LANTHANUM [2,2,2]CRYPTATES, [LACL[2,2,2](H2O)]CL-2-CENTER-DOT-H2O AND [LA(CF3SO3)[2,2,2]1(DMF)](CF3SO3)(2)

Two lanthanum(III) [2,2,2]cryptates, [LaCl[2,2,2](H2O)]Cl-2.H2O (1) and [La(CF3SO3)[2,2,2](DMF)] (CF3SO3)(2) (2) have been prepared by the reaction of LaCl3 and La(CF3SO3)(3) with [2,2,2]cryptand, respectively and their crystal structures have been determ

SYNTHESIS AND CRYSTAL-STRUCTURE OF HETEROPOLY MOLYBDOSILICIC LANTHANIDE K10H3[PR(SIMO11O39)2].18H2O

The intensity data of the title complex were collected at a low temperature of -90-degrees-C. The compound crystallizes in the monoclinic space group P2(1)/n, a = 17.504(2), b = 27.323 (5), c = 21.616(4) angstrom, beta = 104.49 (2)degrees, Z = 4. The structure was solved by Patterson and Fourier techniques and refined by least-squares to an R = 0.088 for 8320 independent reflections. The central Pr ion is bonded to eight oxygen atoms from two molybdosilicic heteropoly ligands to form a square antiprism. The Pr-O average distance is 2.44 (2) angstrom. Both molybdosilicic heteropoly ligands are of a defective alpha-Keggin structure.

THE EFFECT OF FILM-FORMING CONDITIONS FOR TAPCUPC LANGMUIR-BLODGETT-FILMS ON MORPHOLOGY AND PROPERTIES

The dependence of morphology and properties on film-forming conditions is described for the symmetrically substituted copper tetra-4-(2, 4-di-t-amylphenoxy) phthalocyanine (tapCuPc) Langmuir-Blodgett (LB) films. The effects of LB film-forming conditions (such as the surface pressure, pH value and the concentrations of spreading solutions) on film quality were studied with the help of a UV-visible spectrophotometer and a transmission electron microscope. Transmission electron microscopy photographs of the surface morphology of tapCuPc LB films show that a smooth and homogeneous surface structure can be obtained under optimum film-forming conditions.

稀土钼硅杂多酸根配合物K_(10)H_3[Pr(SiMo_(11)·O_(39))_2]·18H_2O的合成及晶体结构

本文采用低温技术,在—90℃的干燥氮气保护下,收集标题化合物晶体的衍射数据,用重原子法解出结构。P2_1/n空间群,a=17.504(2),b=27.323(5),c=21.616(4),β=104.49(2)°,z=4.8320个衍射参与精修,最后的R值为0.088。中心离子Pr(Ⅲ)同2个钼硅杂多酸根中的8个氧原子键合,形成正方反棱柱配位多面体。Pr—O的平均键长为2.44(2)。钼硅杂多酸根配体具有缺位的α型Keggin结构。