187 resultados para two-phase flows


Relevância:

80.00% 80.00%

Publicador:

Resumo:

The horizontal migration of proppant was numerically investigated with a two-fluid model, in which the interaction between fracturing fluid and proppant, along with that among proppants was taken into account through interphase forces. The migration process and the volumetric concentration of the proppant were examined under various conditions, and the. averaged volumetric concentration of the proppant was obtained. The present research might be useful in the process design of the hydraulic fracturing in the oilfields.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

This work is devoted to study of the slip phenomenon between phases in water-oil two-phase flow in horizontal pipes. The emphasis is placed on the effects of input fluids flow rates, pipe diameter and viscosities of oil phase on the slip. Experiments were conducted to measure the holdup in two horizontal pipes with 0.05 m diameter and 0.025 m diameter, respectively, using two different viscosities of white oil and tap water as liquid phases. Results showed that the ratios of in situ oil to water velocity at the pipe of small diameter are higher than those at the pipe of big diameter when having same input flow rates. At low input water flow rate, there is a large deviation on the holdup between two flow systems with different oil viscosities and the deviation becomes gradually smaller with further increased input water flow rate. (C) 2008 Elsevier Inc. All rights reserved.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

From the macroscopic point of view, expressions involving reservoir and operational parameters are established for investigating the stability of moving interface in piston- and non-piston-like displacements. In the case of axi-symmetrical piston-like displacement, the stability is related to the moving interface position and water to oil mobility ratio. The capillary effect on the stability of moving interface depends on whether or not the moving interface is already stable and correlates with the wettability of the reservoir rock. In the case of non-piston-like displacement, the stability of the front is governed by both the relative permeability and the mobility ratio.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

An embedded cell model is presented to obtain the effective elastic moduli for three-dimensional two-phase composites which is an exact analytic formula without any simplified approximation and can be expressed in an explicit form. For the different cells such as spherical inclusions and cracks surrounded by sphere and oblate ellipsoidal matrix, the effective elastic moduli are evaluated and the results are compared with those from various micromechanics models. These results show that the present model is direct, simple and efficient to deal with three-dimensional tyro-phase composites.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

The dynamic response of bed height and concentration waves in liquid-solid fluidized beds to a step change in the fluidization velocity is considered. We experimentally study the liquid-solid fluidized beds, spherical beadings, with sizes ranging from 230 to 270 mesh and the inner diameter of columns made from glass is 2.4 mm. Experimental results find that under certain conditions, fine particles with large Richardson-Zaki exponent n display different dynamic behavior from usual particles with smaller n during expansion and collapse of the fluidized state. (c) 2007 Elsevier Inc. All rights reserved.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

An intended numerical investigation is carried out. The results indicate that, even if a perfect adhesive bond is preserved between the particles and matrix materials, the two-phase element cell model is unable to predict the strength increment of the particulate polymeric composites (PPC). To explore the main reinforcing mechanism, additional microscopic experiment is performed. An ''influence zone'' was observed around each particle which is measured about 2 to 10 micrometers in thickness for a glass-polyethylene mixture. Then, an improved computational model is presented to include the ''influence zone'' effect and several mechanical behaviors of PPC are well simulated through this new model.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

A three-dimensional finite element analysis has been used to determine the internal stresses in a three-phase composite. The stresses have been determined for a variety of interphase properties, the thicknesses of the interphase and the volume fractions of particles. Young's modulus has been calculated from a knowledge of these stresses and the applied deformation. The calculations show that stress distributions in the matrix and the mechanical properties are sensitive to the interphase property in the three-phase composites. The interfacial stresses in the three-dimensional analysis are in agreement with results obtained by an axisymmetric analysis. The predicted bulk modulus in three-dimensional analysis agrees well with the theoretical solution obtained by Qui and Weng, but it presents a great divergence from that in axisymmetric analyses. An investigation indicates that this divergence may be caused by the difference in the unit cell structure between two models. A comparison of the numerically predicted bulk and shear modulus for two-phase composites with the theoretical results indicates that the three-dimensional analysis gives quite satisfactory results.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

presented in a general form where more reasonable relations for the two-phase

Relevância:

80.00% 80.00%

Publicador:

Resumo:

利用国家微重力实验室落塔提供的短时微重力实验环境,对常重力和微重力条件下直接甲醇燃料电池(DMFC)内部的气液两相流动形态和相应电性能等的影响进行了实验研究,发现在微重力条件下,DMFC阳极流道内CO_2气泡速度很小,气泡尺寸随着时间的推移而不断长大,甚至堵塞流道;流道堵塞现象随电流增大而急剧强化.电性能曲线显示,在浓差极化区存在显著的重力效应,电性能的恶化随浓差极化程度的加强而增大.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

采用摄动有限体积(PFV)算法和水平集(level set)技术对T形微通道内互不相溶两相流动进行了数值模拟研究。考察了两相界面张力和微通道壁面润湿性对流动的影响,精确地捕捉到了油水两相流动的界面。对一些典型的T形微通道油水两相流动进行了数值计算,模拟结果和实验结果吻合较好。分析总结出了微通道内两相流动过程中的一些基本规律,为微通道内的液液两相流动实验设计和工业应用提供了新的数值预测手段.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

气液两相流体系是一个复杂的多变量随机过程体系,流型的定义、流型过渡准则和判别方法等方面的研究是多相流学科目前研究的重点内容。本文就与气液两相流流型及其判别有关的研究状况进行了回顾和评述,力图反映近年来气液两相流流型及其判别问题研究的状态和趋势。

Relevância:

80.00% 80.00%

Publicador:

Resumo:

该文研究了两种直径的直管油水两相流动对流型和相含率的影响和在不同管径的水平并行分支管路中的相含率变化规律。实验设备包括内径为50mm的水平主管道和内径为25mm的分支管路。得到了不同入口条件下实验管段的流型和相含率图。实验指出:管道的尺度变化对于流型的影响较小,但对于油水两相的相含率和速度滑移有显著的作用。当油水两相流在并行分支管路中同时流动时,随着入口处水的表观流速增大,并行主管的截面油含率与并行分支管的差距逐渐缩小。

Relevância:

80.00% 80.00%

Publicador:

Resumo:

采用考虑颗粒碰撞的欧拉-拉格朗日数值模拟方法(DPM),对水平突扩圆管中液固两相流固体颗粒的碰撞过程进行了数值计算。在模型中,对液相采用欧拉法建立控制方程,对离散颗粒采用拉格朗日方法模拟。采用硬球模型描述颗粒间的碰撞作用。计算结果表明,该模型可以真实地模拟液固两相流中固体颗粒运动的动态变化过程以及颗粒的非均匀分布特征,从单颗粒层次上提供颗粒的运动信息,这有助于深入研究液固两相流中固体颗粒的运动规律

Relevância:

80.00% 80.00%

Publicador:

Resumo:

圆截面光滑直管内充分发展的两流体同心环状流的线性稳定性研究不仅具有重要的学术意义,而且在预测两相流型转换方面有着重要应用。本文评述了该流动构型的线性稳定性研究进展,着重分析了该流动构型的失稳机制及其与两相流型转换间的关系,并针对微重力气-液两相流地面模拟实验问题,探讨了今后需要着重研究的若干方面。

Relevância:

80.00% 80.00%

Publicador:

Resumo:

根据两流体同心环状流线性稳定性分析的结果,对微重力气/液两相流地面模拟实验所应遵循的相似准则进行了探讨,得到了一个新的重力无关性准则,即Bond数和环形区流体相的毛细数之比的绝对值不大于1.此外,微重力气/液两相流模拟实验还必须满足两个条件,即流量比和气相表观Weber数应与所模拟的流动中对应数值相等.