Evaporation of Ethanol Drops on a Heated Substrate Under Microgravity Conditions

We present in this paper results obtained from a parabolic flight campaign regarding ethanol sessile drop evaporation under reduced gravity conditions. Drops are created using a syringe pump by means of injection through a PTFE (polytetrafluoroethylene) substrate. The drops are recorded using a video camera and an infrared camera to observe the thermal motion inside the drop and on the heating substrate. The experimental set-up presented in this paper enables the simultaneous visualization and access to the heat flux density that is transferred to the drop using a heat flux meter placed between the heating block and the PTFE substrate. We evidence original thermal spreading phenomena during the ethanol drop creation on a heated PTFE substrate. The drop exhibits specific behaviour which is discussed here. This work is performed in the frame of a French-Chinese collaboration (project IMPACHT) for future experiments in a Chinese scientific satellite.

Experimental Setup for Assessing the Energetic Materials Deflagration Propagation under High Temperature and High Pressure Conditions

The technology of "explosion in fractures" is one of new synthetic engineering methods used in low permeability reservoirs. The most important problem arose from the technology is to assess the deflagration propagation capability of milky explosives in rock fractures. In order to investigate detailed this problem in the laboratory, an experimental setup was designed and developed in which different conditions can be simulated. The experimental setup mainly includes two parts. One is the experimental part and the other is the measurement part. In the experimental setup, the narrow slots with different width can be simulated; meanwhile, different initial pressures and initial temperatures can be loaded on the explosives inside the narrow slots. The initial pressure range is from 0-60 MPa, and the initial temperatures range is from room temperature to 100 V. The temperature and the velocity of deflagration wave can be measured; meanwhile the corresponding pressure in the narrow slot is also measured. In the end, some typical measurement results are briefly presented and discussed.

川西云杉(Picea balfouriana)天然群体的遗传变异

青藏高原东南缘由于特殊的生态地理条件，有着丰富的森林资源，这些资源是长江上游涵养水源、保持水土的生态屏障，是生物多样性的资源宝库。但随着过量的森林采伐，使该区曾经丰富的生物多样性资源遭受了前所未有的破坏，天然林的质量严重下降，生态系统退化，功能减弱。与此同时，许多物种的种群规模正在锐减，物种的遗传多样性也严重丧失。川西云杉是西部地区分布最广的云杉树种之一，在较高海拔的地区有着重要的生态学功能，是一种适应性很强的乡土树种。本项目采用简单序列重复标记(SSR)和特定序列位点(STS)研究不同生境条件下川西云杉群体的遗传变异及其时空分布格局，考察遗传变异与复杂的山地生态环境间的潜在联系，系统地揭示川西云杉天然群体与环境系统相互作用的生态适应与分子进化机制。研究成果能有效地为该树种遗传资源的科学保护与合理利用提供理论依据和科学指导，可为中国西南部亚高山天然林的可持续经营及退化生态系统的恢复与重建提供依据。主要研究结果如下： 1 STS和SSR两种分子标记的研究结果表明：川西云杉群体拥有中等水平的遗传多样性(基于SSR标记，平均He = 0.640；基于STS标记，平均He = 0.553)。造成这种中等水平的遗传多样性，可能是由于历史原因，川西云杉天然林被大量采伐，导致了遗传多样性的丧失。两种方法都检测出群体BT有着最高水平的遗传多样性。 2 两种标记的结果都一致说明：检测的10个川西云杉群体间遗传分化比较高，其存在群体间的遗传变异比例要明显地高于广泛分布的挪威云杉、横贯大陆的黑云杉以及兼有连续分布和不连续分布的西加云杉等，但要低于分布范围狭窄且呈不连续分布的粗枝云杉。青藏高原东南部的片段化生境可能是导致高水平遗传分化的主要原因。 3 基于两种标记的UPGMA 聚类和PCA分析结果，以及基于SSR标记的FCA分析结果都显示：群体BY遗传上明显区别于其它群体，其可能原因是青藏高原东南缘山脉阻隔而导致的生殖隔离的结果。 4 根据软件Bottleneck 1.2.02的检测以及不依赖哈迪一温伯格平衡的M比率检测结果：川西云杉种群很有可能经历了近期的遗传瓶颈效应。在本研究中遗传瓶颈效应并没有显著影响到物种的遗传多样性。然而，在这些片断化群体未来的子代群体中很可能出现遗传瓶颈导致的遗传多样性下降的效应。 Due to the extremely complex topography and climatic conditions, the southeast of the Qinghai-Tibet Plateau is region abundant in forest resource, which is benefit to the upper reaches of the Yangtze River water conservation, and protecting natural environment and biodiversity resources. However, by the reason of a plenty of trees were cut in these yeas, the biodiversity resource was destroy with degraded ecosystem and imperfect funcation. Picea balfouriana is one of the regionally distributed conifer species in the southeast of the Qinghai-Tibet Plateau and considered as a constructive species within its distribution area. It is an optimal species for the production of biomass. Moreover, it is well adapted to stressful environments at high altitude, especially to cold and drought conditions which are generally harsh for other trees. In our study, two types of molecular markers (SSR and STS) were used to estimate the genetic diversity and genetic structure of P. balfouriana populations originating from the southeast of the Qinghai-Tibet Plateau with varying climatic and geographical conditions. The results will not only provide a deep insight into its genetic diversity and population genetic structure but also valuable information for further management and breeding programs in P. balfouriana. In summary, the results obtained in this study revealed that: 1 A moderate degree of genetic variation is present in P. balfouriana in the southeast of the Qinghai-Tibet Plateau and it may caused by many trees were cut in the past. Population BT owns the highest level of genetic diversity by both two types of markers. 2 Considerable population differentiation exists among the ten P. balfouriana populations based on both SSR and STS markers, possibly caused by habitat fragmentation and heterogeneous environments. 3 The UPGMA clustering and PCA analyses based on SSR and STS marker, and FCA analyses based on SSR marker congruously separated population BY from other populations, which is likely due to the presence of mountain barriers. 4 The results of bottleneck analysis indicated that P. balfouriana populations that have undergone recent declines. In our research, the bottleneck effect don’t have a significant impact on the genetic diversity of species, however, the level of genetic diversity of P. balfouriana offspring populations growing in the fragmented habitats will decline in the future.

Analysis of sky conditions using 40 year records of solar radiation data in China

IEECAS SKLLQG

Entanglement conditions for mixed SU(2) and SU(1,1) systems

We derive a class of inequalities for detecting entanglement in the mixed SU(2) and SU(1, 1) systems based on the Schrodinger-Robertson indeterminacy relations in conjugation with the partial transposition. These inequalities are in general stronger than those based on the usual Heisenberg uncertainty relations for detecting entanglement. Furthermore, based on the complete reduction from SU(2) and SU(1,1) systems to bosonic systems, we derive some entanglement conditions for two-mode systems. We also use the partial reduction to obtain some inequalities in the mixed SU(2) (or SU(1, 1)) and bosonic systems.

A study of the suppression of the high-temperature helium embrittlement in an oxide-particle dispersion strengthened alloy

In this paper, an investigation on the micro-structure of an Fe-base oxide-dispersion-strengthened (ODS) alloy irradiated with high-energy Ne-20 ions to different doses at a temperature around 0.5T(m) (T-m is the melting point of the alloy) is presented. Investigation with the transmission electron microscopy found that the accelerated growth of voids at grain-boundaries, which is usually a concern in conventional Fe-base alloys under conditions of inert-gas implantation, was not observed in the ODS alloy irradiated even to the highest dose (12000 at.ppm Ne). The reason is ascribed to the enhanced recombination of point defects and strong trapping of Ne atoms at the interfaces of the nano-scale oxide particles in grains. The study showed that ODS alloys have good resistance to the high-temperature inter-granular embrittlement due to inert-gas accumulation, exhibiting prominence of application in harsh situations of considerable helium production at elevated temperatures like in a fusion reactor.

Trichloroisocyanuric acid: A convenient oxidation reagent for phase-transfer catalytic epoxidation of enones under non-aqueous conditions

Trichloroisocyanuric acid (TCCA) is a cheap, safe and readily available alternative to the commonly used hydrogen peroxide and hypochlorite for the phase-transfer catalytic epoxidation of alpha,beta-enones under non-aqueous conditions. A variety of chalcone derivatives give the corresponding epoxides with quantitative conversion and satisfactory yields in just a few hours under mild conditions. An asymmetric variant of the epoxidation can be carried out in the presence of chiral N-anthracenylmethylcinchonidine bromide catalyst giving 73-93% ees and 76-94% yields.

Effects of reaction conditions on the selective oxidation of propane to acrylic acid on Mo-V-Te-Nb oxides

An effective Mo-1 V(0.3)Te(0.23)Nb(0.12)Ox catalysts for the selective oxidation of propane to acrylic acid was successfully prepared by using rotavap method. The catalyst was characterized by XRD and shown to contain (V0.07Mo0.93)(5)O-14, (Nb0.09Mo0.91)O-2.8,3MoO(2)(.)Nb(2)O(5), Mo5TeO16 and/or TeMo4O13, Te4Nb2O13 and a new TeMO (TeVMoO or TeVNbMoO; M = Mo, V and Nb) crystalline phase as the major phase. Regardless of the intrinsic catalytic characteristics of the catalyst, the external reaction conditions would have strong effects on the catalytic performance for propane oxidation. So in this paper, the effects of reaction conditions were investigated and discussed, including temperature, space velocity, V(air)/V(C3H8) ratio and V(steam)/V(C3H8) ratio. A stability test was also carried out on Mo1V0.3Te0.23Nb0.12Ox catalyst. The experimental run was performed during 100 h under the optimized reaction conditions. During the 100 h of operation, propane conversion and acrylic acid selectivity remained at about 59 and 64%, respectively. (C) 2004 Elsevier B.V. All rights reserved.

Liquid-phase hydrodechlorination of chlorinated benzenes over active carbon supported nickel catalysts under mild conditions

Liquid phase hydrodechlorination of chlorinated benzenes was studied over Ni/active carbon (Ni/AC), Ni/gamma-Al2O3, Ni/SiO2 and Raney Ni. The complete dechlorination of chlorobenzene (ClBz) was realized at 333-343 K on Ni/AC under hydrogen atmosphere of 1.0 MPa in the presence of alkaline hydroxide. Dichloro- and trichlorobenzenes were also hydrodechlorinated with 50-95% yields of benzene under the similar conditions, as above. The reaction follows zero-order to ClBz concentration and 1.9 order to hydrogen pressure. The reaction does not proceed in the absence of alkaline hydroxide, suggesting the complete coverage of active nickel surface with produced chlorine and the removal of the chlorine ion with hydroxide ion as a rate-limiting step. The active catalysts were characterized by H-2 chemisorption and transmission electron microscopy techniques. The apparent activity strongly depends on the active area of nickel on catalyst surface. (C) 2004 Published by Elsevier B.V.

On the surface sites Of MOP/SiO2 catalyst under sulfiding conditions: IR spectroscopy and catalytic reactivity studies

The surface sites of MoP/SiO2 catalysts and their evolution under sulfiding conditions were characterized by IR spectroscopy using CO as the probe molecule. The HDS activities of thiophene were measured on the MoP/SiO2 catalyst that was subjected to different sulfidation and reactivation pretreatments. Cus Modelta+ (0 < delta less than or equal to 2) sites are probed on the surface of fresh MoP/SiO2 by molecularly adsorbed CO, exhibiting a characteristic IR band at 2045 cm(-1). The surface of MoP/SiO2 is gradually sulfided in HDS reactions, as revealed by the shift of the IR band at 2045 to ca. 2100 cm(-1). Although the surface of a MoP/SiO2 catalyst becomes partially sulfided, the HDS activity tests show that MoP/SiO2 is fairly stable in the initial stage of the HDS reaction, providing further evidence that molybdenum phosphide is a promising catalytic material for industrial HDS reactions. Two kinds of surface sulfur species are formed on the sulfided catalyst: reversibly and irreversibly bonded sulfur species. The MoP/SiO2 catalyst remains stable in the HDS of thiophene because most sulfur species formed under HDS conditions are reversibly bonded on the catalyst surface. A detrimental effect of presulfidation on the HDS activity is observed for the MoP/SiO2 catalyst treated by H2S/H-2 at temperatures higher than 623 K, which is ascribed to the formation of a large amount of the irreversibly bonded sulfur species. The irreversibly sulfided catalyst can be completely regenerated by an oxidation and a subsequent reduction under mild conditions. (C) 2003 Elsevier Inc. All rights reserved.