Effective properties of graded elliptical cylindrical composites

The effective property has been investigated theoretically in graded elliptical cylindrical composite's consisting of inhomogeneous graded elliptical cylinders and an isotropic matrix under external uniform electric field. As a theoretical model, the dielectric gradient profile in the elliptical cylinder is modeled by a power-law function of short semi-axis variable parameter (xi(2) - 1) in the elliptical cylindrical coordinates, namely epsilon(i)(xi) = c(k) (xi(2) - 1)(k), where c(k) and k are the parameters, and xi is the long semi-axis space variable in an elliptical cylindrical inclusion region. In the dilute limit, the local analytical potentials in inclusion and matrix regions are derived exactly by means of the hyper-geometric function, and the formulas are given for estimating the effective dielectric responses under the external lfield along (x) over cap- and (y) over cap -directions, respectively. Furthermore, we have demonstrated that our effective response formulas can be reduced to the well-known results of homogeneous isotropic elliptical cylindrical composites if we take the limit k -> 0 in graded elliptical cylindrical composites. (c) 2006 Elsevier B.V. All rights reserved.

Genetic parameter estimates for growth traits at early stage of Pacific abalone, Haliotis discus hannai Ino

Heritability and genetic and phenotypic correlations were estimated for juvenile growth traits of Pacific abalone Haliotis discus hannai Ino. The estimates were calculated from shell length and shell width measurements on progeny resulting from 12 half-sib families and 36 full-sib families obtained using artificial fertilization of mating three females to each male. The measurements were taken at 10, 20 and 30 d after fertilization. It was found that heritability estimates based on sire component ranged from 0.23 to 0.36 for shell length and 0.21 to 0.32 for shell width. Heritability estimates from dam component were larger than those from sire component at three ages, indicating presence of maternal effects, non-additive genetic effects and common environmental effects. Phenotypic correlations were significant at three ages (P < 0.05), with values of 0.92, 0.93 and 0.92, respectively. Genetic correlations from the paternal half-sib correlation analysis were highly positive at three ages, with values of 0.50, 0.78 and 0.81, respectively. The results suggest that selective breeding is an effective approach to improving growth traits of Pacific abalone stocks.

Diploid and tetraploid distribution of Allium przewalskianum Regel. (Liliaceae) in the Qinghai-Tibetan Plateau and adjacent regions

Polyploidization plays an important role in generating the current high diversity of plants. Studies of distributional patterns of diploids and derivative autopolyploids have provided important insights into evolutionary processes and cryptic speciation of polyploidization within species defined on the basis of their morphology. However, few studies have been designed to examine distributions of infrageneric diploids and polyploids on the Asian Qinghai-Tibetan Plateau (QTP). Allium przewalskianum occurs widely on the QTP and in adjacent regions, at altitudes ranging from 2000m to 4500m. We collected a total of 844 individuals from 62 populations and determined their cytotypes over the entire distribution range of this species. Tetraploids tend to occur at high altitudes; however, the positive relationship between the ploidy and altitude was only marginally significant (P < 0.05). Contact zones between diploids and tetraploids were recorded on the eastern QTP from north to south. Four populations were found to harbor both cytotypes, but no triploid individuals. The wider distribution of tetraploids may be mainly due to their greater colonization ability in the new niches created by the Quaternary climatic oscillations in the QTP region. Our results offer a fundamental framework for studying evolutionary origins, adaptations and cryptic divergences of polyploids within this species complex based on molecular and/or ecological examinations in the future.

Phylogenetic origins of the Himalayan endemic Dolomiaea, Diplazoptilon and Xanthopappus (Asteraceae : Cardueae) based on three DNA regions

Background and Aims It is an enduring question as to the mechanisms leading to the high diversity and the processes producing endemics with unusual morphologies in the Himalayan alpine region. In the present study, the phylogenetic relationships and origins of three such endemic genera were analysed, Dolomiaea, Diplazoptilon and Xanthopappus, all in the tribe Cardueae of Asteraceae.Methods The nuclear rDNA internal transcribed spacer (ITS) and plastid trnL-F and psbA-trnH regions of these three genera were sequenced. The same regions for other related genera in Cardueae were also sequenced or downloaded from GenBank. Phylogenetic trees were constructed from individual and combined data sets of the three types of sequences using maximum parsimony, maximum likelihood and Bayesian analyses.Key Results The phylogenetic tree obtained allowed earlier hypotheses concerning the relationships of these three endemic genera based on gross morphology to be rejected. Frolovia and Saussurea costus were deeply nested within Dolomiaea, and the strong statistical support for the Dolomiaea-Frolovia clade suggested that circumscription of Dolomiaea should be more broadly redefined. Diplazoptilon was resolved as sister to Himalaiella, and these two together are sister to Lipschitziella. The clade comprising these three genera is sister to Jurinea, and together these four genera are sister to the Dolomiaea-Frolovia clade. Xanthopappus, previously hypothesized to be closely related to Carduus, was found to be nested within a well-supported but not fully resolved Onopordum group with Alfredia, Ancathia, Lamyropappus, Olgaea, Synurus and Syreitschikovia, rather than the Cardinis group. The crude dating based on ITS sequence divergence revealed that the divergence time of Dolomiaea-Frolovia from its sister group probably occurred 13.6-12.2 million years ago (Ma), and the divergence times of the other two genera, Xanthopappus and Diplazoptilon, from their close relatives around 5.7-4.7 Ma and 2.0-1.6 Ma, respectively.Conclusions The findings provide an improved understanding of the intergeneric relationships in Cardueae. The crude calibration of lineages indicates that the uplifts of the Qiinghai -Tibetan Plateau since the Miocene might have served as a continuous stimulus for the production of these morphologically aberrant endemic elements of the Himalayan flora.

中国北方表沙无机碳储量及次生碳酸盐固碳潜力研究

This paper selected the Taklamakan Desert and the Badain Jaran Desert as the research areas, tested the carbonate content of surface-sand samples of dunes using Eijkelkamp carbonate goniophotometer, and analyzed the spatial-distribution characteristics of carbonate and estimated the carbonate-stock and secondary carbonate-stock in 1m depth of surface sand in the Taklamakan Desert and the Badain Jaran Desert. In addition, the paper test XRD, SEM, TDA, stable carbon isotope and radioactive strontium isotope of lacustrine deposits in the Taklamakan Desert and carbonates, such as kunkar, root canal, lacustrine deposits, sinter and calcrete, in the Badain Jaran Desert. Resting on the achievements by our predecessors, it analyzed the mineral-composition differences of the carbonates, calculated the contents of secondary carbonate and, furthermore, evaluated their potential of sequestration of CO2 in the atmosphere. The overall goal of this study was to increase our understanding of soil carbonate in the context of carbon sequestration in the arid region in China. That is, to advance our understanding about whether or not secondary carbonate in desert is a sink for atmospheric CO2. The following viewpoints were obtained: 1 Carbonate contents of surface-sand samples decend from the south to the north of the Taklamakan Desert. The minimum lies in the south and the maxmum in the mid. Carbonate content of surface-sand of megadunes in the Badain Jaran Desert has low value generally in the dune-crest and the base of slope, and large value in the mid. The average of Carbonate contents of all sorts of collected samples in the same area of the Taklamakan Desert has small diffetences. The average is about 9%. 2 Using carbonate contents as key parameters, calculate the carbon-stock of carbonates in 1m depth of surface sand in the Taklamakan Desert and the Badain Jaran Deser.They are 1.13Pg and 0.19 Pg respectively. There are 0.53Pg and 0.088Pg carbon-stock of secondary-carbonates in 1m depth of surface sand in the Taklamakan Desert and the Badain Jaran Desert. 3 Through testing data from XRD （X-ray diffraction）and TAD ( Thermal Analysis Data), the most significant conclusion derived from is that the main mineral ingredient is calcite in different carbonate substances in arid regions, From the SEM(Scanning electron microscopy ) images, can obtains the information about the micro environment of different carbonate forms in which they can grow. 4 Selected gas by termal cracking and traditional phosphoric acid method, their δ13C show that δ13C is a good parameter to indicate the micro environment in which different secondary carbonate forms. From the δ13C of the same type samples, if the redeposit degree is hard, theδ13C is light, the redeposit degree is weak, the δ13C is heave. and the δ13C of the different type samples, δ13C is mainly controlled by the micro environment in which secondary formed. if the procedure is characterized by redeposit and dissolve of marine facies carbonate, δ13C is heavy, it is characterized by CO2 which produced by plant respiration,δ13C is light. 5 From the δ13C of lacustrine deposit in the different grain size, there exsit certain differences in their micro environment and secondary degree among different grain size in the same grade. 6 The secondary carbonate content of lacustrine deposits in Taklimakan Desert is 47.26%. And those of root canal, sinter, calcrete, kunkar, lacustrine deposit and surface sand in Badain Jaran Desert are 91.74%, 78.46%, 76.26%, 87.87%, 85.37%and 46.49%, respectively. Of different grain size samples, the secondary carbonate contents of coarse fraction (20-63μm), sub-coarse fraction (5-20μm) and fine fraction (<5μm) are 80.10%, 47.2%and 50.07%, respectively. 7 There is no obvious relevance betweenδ13C of secondary carbonate and the content of secondary carbonate,theδ13C of secondary carbonate mainly reflects the parameters of secondary process, the content of secondary carbonate reflects difference of secondary degree.. 8 Silicates potentially supply 3.4 pencent calcium source during forming process of lacustrine deposits in Taklimakan Desert. If calcium source is mainly supplied by goundwater, it can be calculated that about 5.18 %, 6.13%, 5.68%, 5.64 % and 6.82% silicates supply calcium source respectively for root canal, kunkar, lacustrine deposit, calcrete and sinter, during the forming process of different kinds of carbonates in Badain Jaran Desert.

电离层参量M(3000)F2和hmF2的经验正交函数方法建模研究

The ionospheric parameter M(3000)F2 (the so-called transmission factor or the propagation factor) is important not only in practical applications such as frequency planning for radio-communication but also in ionospheric modeling. This parameter is strongly anti-correlated with the ionospheric F2-layer peak height hmF2，a parameter often used as a key anchor point in some widely used empirical models of the ionospheric electron density profile (e.g., in IRI and NeQuick models). Since hmF2 is not easy to obtain from measurements and M(3000)F2 can be routinely scaled from ionograms recorded by ionosonde/digisonde stations distributed globally and its data has been accumulated for a long history, usually the value of hmF2 is calculated from M(3000)F2 using the empirical formula connecting them. In practice, CCIR M(3000)F2 model is widely used to obtain M(3000)F2 value. However, recently some authors found that the CCIR M(3000)F2 model has remarkable discrepancies with the measured M(3000)F2, especially in low-latitude and equatorial regions. For this reason, the International Reference Ionosphere (IRI) research community proposes to improve or update the currently used CCIR M(3000)F2 model. Any efforts toward the improvement and updating of the current M(3000)F2 model or newly development of a global hmF2 model are encouraged. In this dissertation, an effort is made to construct the empirical models of M(3000)F2 and hmF2 based on the empirical orthogonal function (EOF) analysis combined with regression analysis method. The main results are as follows: 1. A single station model is constructed using monthly median hourly values of M(3000)F2 data observed at Wuhan Ionospheric Observatory during the years of 1957–1991 and compared with the IRI model. The result shows that EOF method is possible to use only a few orders of EOF components to represent most of the variance of the original data set. It is a powerful method for ionospheric modeling. 2. Using the values of M(3000)F2 observed by ionosondes distributed globally, data at grids uniformly distributed globally were obtained by using the Kriging interpolation method. Then the gridded data were decomposed into EOF components using two different coordinates: (1) geographical longitude and latitude; (2) modified dip (Modip) and local time. Based on the EOF decompositions of the gridded data under these two coordinates systems, two types of the global M(3000)F2 model are constructed. Statistical analysis showed that the two types of the constructed M(3000)F2 model have better agreement with the observational M(3000)F2 than the M(3000)F2 model currently used by IRI. The constructed models can represent the global variations of M(3000)F2 better. 3. The hmF2 data used to construct the hmF2 model were converted from the observed M(3000)F2 based on the empirical formula connecting them. We also constructed two types of the global hmF2 model using the similar method of modeling M(3000)F2. Statistical analysis showed that the prediction of our models is more accurate than the model of IRI. This demonstrated that using EOF analysis method to construct global model of hmF2 directly is feasible. The results in this thesis indicate that the modeling technique based on EOF expansion combined with regression analysis is very promising when used to construct the global models of M(3000)F2 and hmF2. It is worthwhile to investigate further and has the potential to be used to the global modeling of other ionospheric parameters.

胶东蓬家夼式金矿床矿床成因模型与找矿模型研究

The dynamic environments of mineralization in Mesozoic Jiaodong gold mine concentrated area can be devided into two types, compressive environment which related to intracontinental collision and extensional environment which related to intracontinental volcanic rift. The altered rock type (Jiaojia type) and quartz vein type (Linglong type) which related to the former one, were discovered for several years, and became the main types of gold deposits in recent years. A new type gold deposit, syn-detachment altered tectonic breccia type gold deposit, such as Pengjiakuang gold deposit and Songjiagou gold deposit has been discovered on the northeastern margin of Jiaolai Basin. In this paper, the new type of gold deposit has been studied in detail. The study area is located at the northeastern boundaries of Jiaolai Basin, and between the Taocun-Jimo Fault and Wji-Haiyang Fault, in the eastern part of the Jiaodong Block. Pengjiakuang gold deposit and Songjiagou gold deposit occur in a arc-shape detachment fault zone between conglomerate of Lower Cretaceous Laiyang Formation and metamorphic complex of Lower Proterozoic Jingshan Group. Regional geological studies show that Kunyuanshan and Queshan granite intrusions and Qingshanian volcanism were formed in different period of lithospheric thinning of East China in Mesozoic. Granite intrusions were formed in compressive environment, while Qingshanian volcanism were formed in extensional environment. They are all related to the detachment of Sulu Orogenic Belt and the sinistral motion of Tanlu Fault. The Pengjiakuang detachment systems which were formed in the the sinistral motion of Tanlu Fault are the important ore-controlling and ore-containing structure. The Pengjiakuang type gold deposit, controlled by detachment structure, was formed before Yanshanian volcanic period concerning with mixture of meteoric water and magmatic water found in fluid inclusions of gold ores. The minerogenetic epoch has been proposed in 90～120Ma. the host rocks have been extensively subjected to pyritization, silicification, sericitization and carbonatization. Individual ore-body has maximum length of 800m, oblique extension of 500～700m and gold grade of 1～43 * 10~(-6). Native gold is disseminated in silicified, phyllic or carbonatized tectonic breccia. Sulfur, carbon and lead isotope studies on gold ores and wall rocks show that the sulfur come from the metamorphic complex of Lower Proterozoic Jingshan Group, carbon comes from the marble in Jingshan Group, while a part of lead comes from the mantle. The mineralizing fluid is rich in Na~+ and Cl~-, but relatively impoverished in K~+ and F~-. According to the date from hydrogen and oxygen isotopic compositions (δ~(18)OH_2O = 0.59%～4.03%, δDH_2O = -89.5%～97.9%), the conclusion can be reached that the mineralizing fluid of Pengjiakuang gold deposit was a kind of mixed hydrothermal solution which was mainly composed of meteoric water and magmatic water. A genetical model has been formulated. Some apparent anomaly features which show low in the central part and high in the both sides corresponding to the gold-bearing structure, were sum up after analying a vast amount of date by prospecting the orebodies using gamma-ray spectrometer, electrogeochemical parameter technique, controlled source audio magnetic telluric (CSAMT) and shallow surface thermometry in Pengjiakuang gold deposit. The location forecasting problem of buried orebodies has been solved according to these features, and the successful rate is very high in well-drilling. The structural geological-geophysical-geochemical prospecting model has been formulated on the base of the study of geological, geophysical and geochemical characteristics of Pengjiakuang type gold deposit, and the optimum combinational process of geophysical and geochemical prospecting techniques has been summed up. A comparative study shows that the Pengjiakuang type gold deposit, the syn-detachment altered tectonic breccia type gold deposit, is different from Jiaojia type gold deposits and Linglong type gold deposits, in Jiaodong Block. In general, if formed under an extensional tectonic condition and located at detachment fault zone along the margin of Mesozoic Jiaolai basin, and the gold mineralization has also close genetic relationship with alkaline magamtism. Being a new type of gold deposit in Jiaodong gold mine concentrated area, it could be potential to explore in the same regions which processed the same ore-forming geological conditions and mineralization informations.

库车坳陷第三纪磁性地层和磁组构的研究

The Tertiary Kuche depression, also known as one of the most economically important oil and gas prospecting regions in the Tarim Basin, is a foreland basin formed by flexural subsidence resulting from the southward thrusting of the southern Tianshan. Detailed geological and geophysical studies on the Tertiary sequence of the Kuche region would provide constraints not only on the Mesozoic and Cenozoic deformation patterns, and its controlling on the formation and distribution of oil and gas of the Kuche depression, but also on the India-Asia postcollisional uplift and continental deformation of the Tianshan regions. In this thesis, the Tertiary sequence of the Kuche depression, which is composed of the upper Kumukeliemu Formation, Suweiyi Formation, Jidike Formation, Kangcun Formation, and Kuche Formation, was selected for magnetostratigraphic and anisotropy of magnetic susceptibility (AMS) study. Among a total of 697 collected sites, 688 sites gave magnetic fabric results and 686 sites yielded reliable paleomagnetic results, building up magenetostratigraphy for the Tertiary sequence of the Kuche depression. By correlating with international geomagnetic polarity timescale, the followings were concluded: 1) the time interval of the sampling sections is some 31-8.1 Ma; 2) the boundaries for Kangcun/Jidike Formations, Jidike/Suweiyi Formations, and Suweiyi/Kumukeliemu Formations are at about 13.5 Ma, 26 Ma and 29 Ma respectively; 3) the Jidike Formation might be formed in an interval between the late Upper Oligocene and middle Miocene, whereas the Suweiyi Formation was formed in the Upper Oligocene, in turn, the Paleogene/Neogene boundary is most likely to be at the bottom of the Jidike Formation in the Kuche depression; 4) the dramatic transition from the marine/lacustrine to fluvial/alluvial facies in the Suweiyi Formation and the lower Jidike Formation of the Kuche depression, which may indicate the initiation of Cenozoic thrusting in the Kuche depression, is probably occurred in the late Oligocene, i.e. at about 28-25 Ma. On the other hand, systematic differences of the AMS parameters, such as the corrected anisotropy of magnetic susceptibility, shape parameter of ellipsoids, q factors, angles between the intermediate and minimum magnetic susceptibility directions and bedding, indicate that a dramatic transition of tectonic strain is most likely to occur at about 16 Ma (middle Miocene) in the Kuche depression. Taking into account the initiation o f C enozoic thrusting in the Kuche d epression i s at about 2 8-25 M a, we argue that the intensive Cenozoic thrusting in the Kuche depression is mainly happened during a period between the late Oligocene to middle Miocene.

贵州碳酸盐岩风化壳形成地球化学过程、对比及年代学研究Geochemical Processes, Comparison and Dating for the Weathering Crusts in Karst Regions of Guizhou Province

由于缺乏相应的沉积地层，贵州新生代地质、环境演化恢复一直是学术界的难点问题。夷平面研究的兴起，为陆地地壳抬升、地貌演变等反演提供了理论基础，而风化壳正是夷平面研究的重要替代对象，尤其是对各类沉积地层不发育的地区。因而，贵州高原各级台地上发育有较为广泛的红色风化壳自然地、就成了主要研究载体。然而一与其它岩类不同，碳酸盐岩风化成土作用过程研究并没有得到同等重视，其研究范围和程度均很不充分。显然，要想利用碳酸盐岩风化壳进行夷平面等地质、地貌意义研究，就必需详细了解贵州或中国南方碳酸盐岩风化成土的基本过程。也只有如此，才能明确各种对比指标的使用条件和范围，才能明确各种测年结果的具体意义，才能真正地通过贵州碳酸盐岩风化壳获取全省地质、环境演化信息。本论文通过对贵州省岩溶台地碳酸盐岩石灰土、红色风化壳剖面形成地球化学过程的剖析，开展石灰土与红色风化壳之间的关联和差异性综合对比、红色风化壳之间发育程度的比较，以及风化壳剖面尝试性的侧年等方面研究，取得了以下儿点认识：1、石灰土形成地球化学过程及对比通过矿物组成、粒度分布特征、地球化学方法判别，确定了本文所选石灰土剖面物质来源于下伏碳酸盐岩中的酸不溶物，是碳酸盐岩风化后酸不溶物原地残余堆积的结果。石灰土形成的地球化学过程都遵循碳酸盐岩风化成土之两阶段模式：母岩－酸不溶物，大量可溶性物质Ca、Mg、Mn、P、Na淋失，而Si、K·Fe、Al、Ti则相对富集。该过程的矿物组成变化表现为，伴随碳酸盐矿物（方解石、白云石等）的溶解、迁移，硅酸盐相矿物（长石、2:1型粘土矿物等）残余、累积。酸不溶物，土层或土层的演化，K、Si（长石、伊利石）不断淋失，而Al（伊利石、高岭石、三水铝石）、Fe（针铁矿、赤铁矿等）逐渐富集，体现出脱硅、富铝（铁）过程。我们强调碳酸盐岩风化成土分为两个阶段，但也认识到风化作用是综合的、复杂的：在碳酸盐矿物大量淋失过程中，同时也进行着酸不溶物的风化。石灰土分为原生和次生两种成因类型。原生石灰土的风化程度总体较低，剖面中还残留一定量的CaCO3，剖面从下到上矿物组成、地球化学各种指标具有逐渐演化的过渡特征。原生石灰上土层演化过程显示出正风化序列，从下到上风化程度逐渐增大、可溶性物质逐渐减少、稳定和相对稳定组分（Al、Fe．、REE）含量不断增大。另外，主量元素的质量迁移系数在剖面中的变化与风化程度呈明显的相关性。而次生石灰土不但具有很高的风化程度，而且剖面无过渡特征，显示可能是由遭受强烈风化作用的物质直接转变形成的。剖面中也含有一定量后期加入的碳酸盐，但与高CIA值特征不相匹配；SiO2、Al2O3、Fe2O3组分具有不同的变化特征，与）成化程度无明显关联；REE在剖面岩一上界面出现富集层。2、碳酸盐岩红色风化壳形成地球化学过程及其与石灰土的对比红色风化壳形成的地球化学过程也遵循碳酸盐岩风化成土之两阶段模式：母岩一酸不溶物，大量可溶性物质Ca、Mg、Mn、P、Na淋失，而Si、K、Fe、Al、Ti则相对富集。该过程的矿物组成变化表现为，伴随碳酸盐矿物（方解石、白云石等）的溶解、迁移，硅酸盆相矿物（长石、2:1型粘土矿物等）残余、累积。酸不济物一土层或上层的演化，K、Si（长石、伊利石）不断淋失，而Al（伊利石、高岭石、三水铝石）、Fe（针铁矿、赤铁矿等）逐渐富集，体现出脱硅、富铝（铁）过程。石灰土与红色风化壳之间既存在共性，又有一定的差异性。红色风化壳与原生石灰土一样都具有过渡特征，但后者仅在剖面下部出现一定的过渡层位；原生石灰士的城化程度远低于红色风化壳，仅与后者底部土层相当；原生石灰土不具有红色风化壳之岩-土REE（超常）富集层。总体上，原生石灰土可以作为红色风化壳的前身。次生石灰土与红色风化壳在矿物组成、风化程度等各种地球化学指标等都十分接近（略低），显示与红色风化壳之间存在某种关联：由红色风化壳物质直接转变，或由酸不溶物已强烈风化的（白云岩）岩粉、碎裂岩风化形成。3、碳酸盐岩风化成土母岩差异性碳酸盐岩风化成土存在母岩差异性，石灰土母岩差异性较为明显，而红色风化壳的母岩差异性较弱，体现出红色风化壳的均一化特征。石灰土母岩差异性体现为：母岩为灰岩的石灰土剖面主量元素含量变化特征较为一致，而白云岩则具有不同的变化；灰岩石灰土Fe3＋、Al具有不同的富集、亏损特征，且具有富集层的补偿亏损层，而白云岩石灰上两组分都呈现无补偿层位的相同富集态势；灰岩石灰土剖面出现负Eu异常和具以Gd为中心的倒“V”型MREE稀土富集特征（母岩标准化），而白云岩石灰土无明显Eu异常和具L既E或HREE稀士．富集特征；灰岩和白云岩石灰土的微量元素富集、亏损特征也有所不同，前者从上到下逐渐富集，而后者无明显变化趋势。红色风化壳形成的基本过程、主量元素地球化学行为无明显的母岩相关性，没有如石灰土剖面灰岩和白云岩之间存在的差异性，显示出红土化作用的均一化过程；微量元素中受重矿物影响的元素与母岩类型有一定的关联，但大多数元素的亏损、富集等与具体剖面的微环境关系密切。4、碳酸盐岩红色风化壳发育程度的对比及意义多利指标对比显示所选红色风化壳的风化程度有一定的强弱差别：平坝剖面＞湖潮剖面＞天龙剖面、大兴剖面＞花溪剖面、新蒲剖面，但这种差异性不足以否定各剖面隶属于贵州山盆期广泛夷平面的基本推测。各剖面之间的微弱差异是红色风化壳形成时纬度分带和垂向分带的体现。低纬度的平坝、湖潮、天龙剖面经历的风化作用强于高纬度的新蒲、大兴剖面；高海拔的新蒲剖面风化程度低于海拔低的大兴剖面。5、红色风化壳次生石英裂变径迹测年红色风化壳次生石英裂变径迹方法测年尝试，得到一定的结果和认识：晶形相对较好的石英，是次生的，与母岩中碎屑及成岩阶段没有关联；各剖面上部与中、下部次生石英的诱发裂变径迹的密度有着明显的区别，可能暗示它们的形成环境不同；名一剖面石英的形成或退火年龄分布较为分散，1.2-25.2Ma，同一剖面的石英年龄也不均一，变化较大；从下到上，年龄值呈现出逐渐减小的规律性，与风化作用的正常序列相反。如果能确切其成因，次生石英裂变径迹年代学研究将是确定风化壳形成时代及揭示主要风化作用信，却钩有利武器。

Optimization and parameter study for chiral separation by capillary electrophoresis

Orthogonal design and uniform design were used for the optimization of separation of enantiomers using 2,6-di-O-methyl-beta-cyclodextrin (DM-beta-CD) as a chiral selector by capillary zone electrophoresis, The concentration of DM-beta-CD, buffer pH, running voltage, and capillary temperature were selected as variable parameters, their different effects on peak resolution were studied by the design methods. It was concluded that orthogonal design offers a rapid and efficient means for testing the importance of individual parameters and for determining the optimum operating conditions. However, for a large number of both factors and levels, uniform design is more efficient, The effect of addition of methanol and citric acid buffer on the separation of enantiomers was also examined.

认知电位时空模式研究

This report mainly focused on methodology of spatiotemporal patterns (STP) of cognitive potentials or event-related potentials (ERP). The representation of STP of brain wave is an important issue in the research of neural assemblies. This paper described methods of parametric 3D head or brain modeling and its corresponding interpolation for functional imaging based on brain waves. The 3D interpolation method is an extension of cortical imaging technique. It can be used with transformed domain features of brain wave on realistic head or brain models. The simulating results suggests that it is a better method in comparison with the global nearest neighbor technique. A stable and definite STP of brainwave referred as microstate may become basic element for comprehending sophisticated cognitive processes. Fuzzy c-mean algorithm was applied to segmentation STPs of ERP into microstates and corresponding membership functions. The optimal microstate number was estimated with both the trends of objective function against increasing clustering number and the decorrelation technique base don microstate shape similarity. Comparable spatial patterns may occur at different moments in time with fuzzy indices and thus the serial processing limit generated from behavioral methods has been break through. High-resolution frequency domain analysis was carried out with multivariate autoregressive model. Bases on a 3D interpolation mentioned above, visualization of dynamical coordination of cerebral network was realized with magnitude-squared partial coherence. Those technique illustrated with multichannel ERP of 9 subjects when they undertook Strop task. Stroop effects involves several regions during post-perception stage with technique of statistical parameter mapping based F-test [SPM(F)]. As SPM(F) suggested task effects occurred within 100 ms after stimuli presentation involved several sensory regions, it may reflect the top-down processing effect.