~(12)C~(6+)重离子束照射治疗复发性软组织肉瘤临床疗效探讨

目的: 应用我国自主研发的重离子加速器产生的12C6+重离子束治疗复发性软组织肉瘤,评价其高线性能量传递 (LET)及低 LET在临床应用中的优劣. 方法: 3例经病理证实为软组织肉瘤自愿接受重离子束照射的患者,其中 2例病变位于腹部,1例在背部. 所有患者均为手术复发 2次以上,最多达 6次,并经手术行常规放疗失败. 应用 80～100mev/u重离子束对 3例患者分别给予总剂量 72～120 GyE/6212 f照射,生物效应剂量 (RBE) =3. 结果:2例患者 3mo后病变完全消失,达临床治愈;1例缩小 75%,达临床部分缓解,总有效率为100%.治疗中及治疗后照射野皮肤无破溃等放射性损伤.结论:12C6+重离子束具有治疗精度高,疗程短,对肿瘤周围正常组织损伤小等特点. 特别在射线抗拒的难治性肿瘤中可达到常规放疗难以实现的疗效,具有很好的临床应用前景.

3,5-二甲基吡唑对铵态氮硝化及作物生长的影响

采用室内培养试验和盆栽试验相结合的方法,以春小麦和水稻为供试作物,初步探讨不同用量的3,5-二甲基吡唑(DMP)对土壤铵态氮硝化、作物产量及氮素利用的影响。结果表明,在本试验条件下,施用占尿素N量0.6%1~.0%的DMP(折合0.80~.9μg/g,干土),可显著抑制土壤硝化作用的进行,其抑制效应随抑制剂用量的增加逐渐增强。与对照单施尿素相比,施用1.0%DMP可使土壤NH4+-N含量提高30%以上,NO3--N含量降低20%左右。施用占尿素N量0.8%1~.0%的DMP对春小麦产量影响不大,但能显著提高水稻产量和两种作物的氮肥表观利用率,促进植株体内的氮素向子粒中的转移。与等量DCD(双氰胺)比较,DMP处理的水稻子粒粗蛋白含量和氮肥表观利用率显著提高,但产量差异不显著。

3种藓类植物水分含量与光合作用、呼吸作用和水势的关系(英文)

对湿地匍灯藓〔Plagiomnium acutum(L indb.) T.Kop.〕、大羽藓〔Thuidium cymbi-folium(Dozy &Molk.) Dozy &Molk.〕和垂藓〔Chrysocladiun retrorsum(Mitt.) Fleisch.〕的水分含量与光合作用、呼吸作用和水势的关系进行了初步研究 (1 999年 5月 2 0日到 6月1 0日 )。在这 3种藓类植物中 ,其水分含量与光合作用速率 (Pn)的关系可以分为 2种类型 :一种类型如大羽藓和垂藓 ,在藓体水分含量 2 0 %～ 70 %时 ,Pn随着水分含量增加而增加 ,但是在 80 %～ 95%时 ,Pn随水分含量增加而下降 ,光合最适水分含量约 70 %～ 80 % ;另一种出现在湿地匍灯藓 ,水分含量 2 0 %～ 80 %时 ,Pn随着水分含量增加而增加 ,在 80 %～ 95%时 ,Pn维持一个较高的水平 ,光合最适水分含量为 80 %～ 90 %。在一个大的水分含量范围内 (60 %～ 95% ) ,暗呼吸 (Rd)保持相对稳定 ,但是在水分含量较低时 (2 0 %～ 70 % ) ,Rd随着水分含量的下降而下降。在藓体水分含量与水势之间的关系方面 ,3种藓类植物相似 ,水分含量与水势对数之间的回归曲线为 S形曲线

中国东北落叶松属3种植物潜在分布对气候变化的敏感性分析

该文在东北地区多年平均的年均温、年降水分布图,海拔高程图、坡度图、坡向图和植被图的基础上,使用地理信息系统和Logistic回归模型的结合,预测3种落叶松(Larixsp.)的"气候-地形"潜在分布区。预测精度用敏感性、指定度和总正确率进行评价,3个树种的敏感性为61%~88%,指定度为80%~99.8%,总正确率为80%~99.8%。年均温、年降水和海拔是控制3种落叶松分布的主要环境因子。采用5种气温变化方案(+1℃、+2℃、+3℃、+4℃和+5℃)和6种降水变化方案(-30%、-20%、-10%、+10%、+20%和+30%),预测气候变化对各个树种潜在分布的影响,探索不同的树种对气候因子的敏感性。结果表明,气温每上升1℃,兴安落叶松(Larixgmelinii)将减少12%;长白落叶松(Larix olgensisvar.changpaiensis)将增加23%;华北落叶松(Larix principis-rupprecntii)将增加500%。降水每增加10%,兴安落叶松将减少12.5%;长白落叶松将增加64%;华北落叶松将减少15%;随气候的"暖干化"(+5℃,-30%),兴安落叶松将向西北方退缩100 km左右;长白落叶松向西北方扩展100 km左右;华北落叶松将向东北方扩展800 km左右。随气候的"暖湿化"(+5℃,+30%),兴安落叶松将向西北退缩400km左右;长白落叶松将向西北方扩展550 km;华北落叶松将向东北方扩展320 km左右。

Highly cis-1,4 selective polymerization of dienes with homogeneous Ziegler-Natta catalysts based on NCN-pincer rare earth metal dichioride precursors

The first aryldiimine NCN-pincer ligated rare earth metal dichlorides (2,6-(2,6-C6H3R2N=CH)(2)C6H3)LnCl(2)(THF)(2) (Ln = Y, R = Me (1), Et (2), Pr (3); R = Et, Ln = La (4), Nd (5), Gd (6), Sm (7), Eu (8), Tb (9), Dy (10), Ho (11), Yb (12), Lu (13)) were successfully synthesized via transmetalation between 2,6-(2,6-C2H3-R2N=CH)(2)-C6H3Li and LnCl(3)(THF)(1 similar to 3.5). These complexes are isostructural monomers with two coordinating THF molecules, where the pincer ligand coordinates to the central metal ion in a kappa C:kappa N: kappa N' tridentate mode, adopting a meridional geometry.

Enhanced amplified spontaneous emission by assistant Forster energy transfer in DCJTB-C545T-Alq(3) coguest-host system

Amplified spontaneous emission (ASE) characteristics of a red fluorescent dye 4-(dicyanomethylene)-2-t-butyl-6(1,1,7,7-tetramethyljulolidyl-9-enyl)-4H-pyran (DCJTB) were significantly improved by assistant Forster energy transfer. The coguest-host system was composed of an electron transport organic molecule tris(8-hydroxyquinoline) aluminum (Alq(3)) as host and a green fluorescent dye (10-(2-benzothiazolyl)-1,1,7,7-tetramethyl-2,3,6,7-tetrahydro-1H,5H,11H-[1]benzopyrano[6,7,8-ij]quinolizin-11-one) (C545T) as assistant dopant codoped with the guest red dye DCJTB as emitter in a matrix of polystyrene (PS).

Tungsten oxide doped N,N-'-di(naphthalen-1-yl)-N,N-'-diphenyl-benzidine as hole injection layer for high performance organic light-emitting diodes

By introducing tungsten oxide (WO3) doped N,N-'-di(naphthalen-1-yl)-N,N-'-diphenyl-benzidine (NPB) hole injection layer, the great improvement in device efficiency and the organic film morphology stability at high temperature were realized for organic light-emitting diodes (OLEDs). The detailed investigations on the improvement mechanism by optical, electric, and film morphology properties were presented. The experimental results clearly demonstrated that using WO3 doped NPB as the hole injection layer in OLEDs not only reduced the hole injection barrier and enhanced the transport property, leading to low operational voltage and high efficiency, but also improved organic film morphology stability, which should be related to the device stability. It could be seen that due to the utilization of WO3 doped NPB hole injection layer in NPB/tris (8-quinolinolato) aluminum (Alq(3))-based device, the maximum efficiency reached 6.1 cd A(-1) and 4.8 lm W-1, which were much higher than 4.5 cd A(-1) and 1.1 lm W-1 of NPB/Alq(3) device without hole injection layer. The device with WO3 doped NPB hole injection layer yet gave high efficiency of 6.1 cd A(-1) (2.9 lm W-1) even though the device was fabricated at substrate temperature of 80 degrees C.

Preparation and Electrical Properties of New Oxide Ion Conductors Ce6-xGdxMoO15-delta (0.0 <= x <= 1.8)

A series of oxide ion conductors Ce6-xGdxMoO15-delta (0.0 <= x <= 1.8) have been prepared by the sol-gel method. Their properties were characterized by differential thermal analysis/thermogravimetry (DTA/TG), X-ray diffraction (XRD), Raman, IR, X-ray photoelectron spectroscopy (XPS), and AC impedance spectroscopy. The XRD patterns showed that the materials were single phase with a cubic fluorite structure. The conductivity of Ce6-xGdxMoO15-delta increases as x increases and reaches the maximum at x = 0.15. The conductivity of Ce4.5Gd1.5MoO15-delta is sigma(t) = 3.6 x 10(-3) S/cm at 700 degrees C, which is higher than that of Ce4.5/6Gd1.5/6O2-delta (sigma(t) = 2.6 x 10(-3) S/cm), and the corresponding activation energy of Ce4.5Gd1.5MoO15-delta (0.92 eV) is lower than that of Ce4.5/6Gd1.5/6O2-delta (1.18 eV).

铁系3,4-聚异戊二烯橡胶的性能

考察了以异辛酸铁、三异丁基铝和偶氮二异丁腈催化剂在己烷中50℃下制备的3,4-聚异戊二烯(3,4-IR)[3,4(+1,2)结构质量分数约为50%,ML110+04℃为52,玻璃化转变温度为-21.6℃]与SBR或NR质量比为20/80组成的共混胶的力学性能和粘弹性能。SBR/3,4-IR和NR/3,4-IR共混胶与SBR或NR相比,其拉伸强度和扯断伸长率有所下降,回弹性明显降低,但硬度基本不变。根据0℃和60℃下的损耗因子tanδ值可知,3,4-IR可明显提高SBR或NR硫化胶的抗湿滑性能,并使滚动阻力有所降低。

低相对分子质量铁系3,4-聚异戊二烯橡胶的性能

考察了制备的低相对分子质量3,4-聚异戊二烯与SBR或NR按20/80质量比组成的共混胶的力学性能和粘弹性能。结果表明,SBR/3,4-IR和NR/3,4-IR共混胶与SBR或NR相比,其拉伸强度、拉断伸长率和永久变形有所下降,回弹性明显降低,但硬度基本不变。根据0°C和60°C下的损耗因子tanδ值可知,3,4-IR可明显提高SBR或NR硫化胶的抗湿滑性能,对滚动阻力无明显的影响。

Crystal structures of EtEDTB center dot 1.4C(2)H(5)OH center dot 5H(2)O and H4EtEDTB(ClO4)(4)center dot C2H5OH (EtEDTB=N, N, N ', N '-tetrakis[2-(1-ethylbenzimidazolyl)methyl]-1,2-ethanediamine)

The crystal structures of EtEDTB.1.4C(2)H(5)OH.5H(2)O 1 and H4EtEDTB(ClO4)(4).C2H5OH 2 (EtEDTB = N, N,N',N'-tetrakis[2-(1-ethylbenzimidazolyl)methyl]-1,2-ethanediamine) have been determined by single-crystal X-ray diffraction method. Compound 1 crystallizes in the space group P(1) over bar with a = 11.489(2), b = 11.866(3), c = 12.002(3) Angstrom, alpha = 97.47(2), beta = 114.564(13), gamma = 114.11(2)degrees, V = 1266.6(5) Angstrom(3), Z = 1, M-r = 847.48, D-c = 1.111 g/cm(3), F(000) = 456 and mu(MoKalpha) = 0.076 mm(-1). A total of 5207 reflections were measured for 1, of which 4323 were independent. The structure of 1 was solved by direct methods and refined by full-matrix least-squares technique to the final R = 0.0706 and wR = 0.1802 for 1318 observed reflections with I > 2sigma(I). In the structure of 1, centrosymmetric EtEDTB molecules are linked by hydrogen bonds through water and ethanol to form 2-dimensional network. Compound 2 crystallizes in the space group C2/c with a = 24.260(5), b = 13.040(3), c = 17.680(4) Angstrom, beta = 97.50(3)degrees, V = 5545.2(2) Angstrom(3), Z = 4, M-r = 1140.80, D-c = 1.366 g/cm(3), F(000) = 2384 and mu(MoKalpha) = 0.289 mm(-1).

Y_2O_3∶Eu~(3+)纳米线阵列的制备与表征

Y2 O3∶ Eu3+红色荧光粉由于色纯度高、化学性质稳定和量子效率接近 1 0 0 %而广泛用于荧光灯和投影电视等方面 .近年来 ,Y2 O3∶Eu3+的大量研究工作主要集中于纳米粉末的制备方法及其与体相材料不同的发光特性 [1～ 3] .最近 ,有关 Y2 O3∶ Eu3+及其稀土化合物的纳米管、纳米线和纳米带一维材料的制备成为研究热点 . Wu Changfeng等[4 ,5] 利用表面活性剂合成了 Y2 O3∶ Eu3+纳米管 .激光格位选择激发测试结果表明 ,Eu3+在纳米管中占据 3个不同的格位 ,其 61 1 nm处的红色发光峰出现了宽化 .HeYu等 [6 ] 采用水热法及退火处理制备出了 Y2 O3∶ Eu3+纳米带 ,发现 Eu3+的发射峰不仅宽化 ,而且出现了 62 5 nm的新峰 .Li Yadong等 [7～ 9]采用水热法制备了稀土氧化物、硫氧化物和氢氧化物等的纳米线和纳米管 ,并探索了其形成机理 ,同时发现 Y2 O3S∶ Yb3+,Er3+具有上转换的性质 .制备各种类型的一维纳米材料的目的之一是为了进一步组装出如纳米阵列材料等功能结构 ,最终实现纳米器件的制作 ,但上述制备方...

Luminescence and energy transfer properties of Ca2Gd8(SiO4)(6)O-2 : A(A = Pb2+, Tm3+) phosphors

Ca2Gd8(SiO4)(6)O-2: A(A = Ph2+, Tm3+) phosphors were prepared through the sol-gel process. X-ray diffraction (XRD), scanning electron microseopy(SEM) and photoluminescence spectra were used to characterize the resulting phosphors. The results of XRD indicate that the phosphors crystallized completely at 1000 degreesC. SEM study reveals that the average grain size is 300 similar to 1000 nm. In Ca2Gd8(SiO4)(6)O-2: Tm3+ phosphors, the Tm3+ shows its characteristic blue emission at 456 nm (D-1(2)-F-3(4)) upon excitation into its H-3(6)-D-1(2)(361 nm), with an optimum doping concentration of 1 mol% of Gd3+ in the host lattices. In Ca2Gd8(SiO4)(6)O-2: Pb2+, Tm3+ phosphors, excitation into the Ph2+ at 266 nm (S-1(0)-P-3(1)) yields the emissions of Gd3+ at 311 nm (P-6-S-8) and Tm3+ at 367 nm (D-1(2)-H-3(6)) and 456 our (D-1(2)-F-3(4)), indicating that energy transfer processes of Pb2+-Gd3+ and Ph2+-Tm3+ have occur-red in the host lattices.

聚对苯二甲酸1,3-丙二醇酯溶液浇铸薄膜形态结构

聚对苯二甲酸 1 ,3-丙二醇酯 ( PTT)是典型的半结晶聚合物 ,从熔体结晶形成球晶 ,在某一结晶温度范围内 ,在球晶中可观察到环带结构[1～ 4 ] .一般认为 ,环带球晶的形成归因于片晶沿球晶径向的周期性扭曲[1,2 ] .本文研究了 PTT溶液浇铸薄膜在溶剂挥发过程中等温结晶的形态结构 .1　实验部分　　 PTT样品为美国壳牌化学公司产品 ,熔点为 2 2 8℃ .将 PTT粒料于 1 1 0℃溶解在苯酚和1 ,1 ,2 ,2 -四氯乙烷 (质量比为 60∶ 40 )的混合溶剂中 ,配成质量分数为 0 .2 %～ 2 %的溶液 ,滴少许溶液在加热的云母片上 ,在预先设定的结晶温度 ( 90～ 2 0 0℃ )下等温结晶 ,然后将 PTT薄膜快速冷却至室温 .用 Leica DMLP偏光显微镜 ( PL M)和 SPA- HV30 0原子力显微镜 ( AFM)进行形态表征 .2　结果与讨论　　图 1为 PTT溶液浇铸薄膜在不同温度下等温结晶后的 PLM图 ,可以清楚地看到 Maltese十字消光现象 .PTT溶液浇铸薄膜在 90～ 1 30℃的结晶温度范围内 ,形成环带球晶 ;当结晶温度为 1 40℃...

Green electroluminescent polyfluorenes containing 1,8-naphthalimide moieties as color tuner

A series of copolymers (CNPFs) containing low-band-gap 1,8-naphthalimide moieties as color tuner was prepared by a Yamamoto coupling reaction of 2,7-dibromo-9,9-dioctylfluorene (DBF) and different amount of 4-(3,6-dibromocarbazol-9-yl)-N-(4'-tert-butyl-phenyl)-1,8-naphthalimide (Br-CN) (0.05-1 mol% feed ratio). The light emitting properties of the resulting copolymers showed a heavy dependence on the feed ratio. In photoluminescence (PL) studies, an efficient color tuning through the Forster energy transfer mechanism was revealed from blue to green as the increase of Br-CN content, while in electroluminescence (EL) studies, the color tuning was found to go through a charge trapping mechanism. It was found that by introduction of a very small amount of Br-CN (0.1-0.5 mol%) into polyfluorene, the emission color can be tuned from blue to pure green with Commission International de l'Echairage (CIE) coordinates being (0.21, 0.42) and (0.21, 0.48). A green emitting EL single-layer device based on CNPF containing 0.1 mol% of Br-CN showed good performances with a low turn-on voltage of 4.2 V, a brightness of 9104 cd/m(2), the maximum luminous efficiency of 2.74 cd/A and the maximum power efficiency of 1.51 lm/W.