Bromophenols coupled with nucleoside bases and brominated tetrahydroisoquinolines from the red alga Rhodomela confervoides

Three new bromophenols C-N coupled with nucleoside base derivatives (1-3) and three new brominated 1,2,3,4-tetrahydroisoquinolines (5-7, together with a new brominated tyrosine derivative (4, have been isolated from polar fractions of an ethanolic extract of the red alga Rhodomela confervoides. By spectroscopic and chemical methods including HRMS and 2D NMR data, their structures were determined as 7-[3-bromo-2-(2,3-dibromo-4,5-dihydroxybenzyl)-4,5-dihydroxybenzyl]-3,7-dihydro-1H-purine-2,6-dione (1), 7-(2,3-dibromo-4,5-dihydroxybenzyl)-3,7-dihydro-1H-purine-2,6-dione (2, 9-[3-bromo-2-(2,3-dibromo-4,5-dihydroxybenzyl)-4,5-dihydroxybenzyl]adenine (3), (-)-8S-(3-bromo-5-hydroxy-4-methoxy)phenylalanine (4), (-)-3S-8-bromo-6-hydroxy-7-methoxy-1,2,3,4-tetrahydroisoquinoline-3-carboxylic acid (5), methyl (-)-3S-8-bromo-6-hydroxy-7-methoxy-1,2,3,4-tetrahydroisoquinoline-3-carboxylate (6), and methyl (-)-3S-6-bromo-8-hydroxy-7-methoxy-1,2,3,4-tetrahydroisoquinoline-3-carboxylate (7). Compounds 5-7 were semisynthesized by using 4 as the starting material.

Experimental evaluation of heterobeltiosis and heterosis between two populations of Pacific abalone Haliotis discus hannai Ino

A2 x 2 factorial cross between two populations of Pacific abalone Haliotis discus hannai Ino, collected separately from Dalian (D) in China and Miyagi (M) in Japan, was conducted to compare performances in fertilization rate, hatching rate, metamorphosis rate and growth at days 20, 43, 160 and 330 between purebreds (DD and MM) and crossbreds (DM and MD) and investigate the magnitude of heterobeltiosis (better parent) and heterosis (mid-parent). Heterobeltiosis and heterosis for all the traits analyzed were evidently different between crossbreds DM and MD. Heterobeltiosis in the crossbred DM varied among traits, with values of 2.5% for the fertilization rate, 2.2% for the hatching rate, -1.9% for the metamorphosis rate and 7.4% for the growth at the (lay 330. The crossbred DM displayed positive heterotic values for fertilization rate (5.4%), hatching rate (7.4%), metamorphosis rate (7.6%) and growth (12.0%) at the day 330. However, both heterobeltiosis and heterosis for all the traits in the crossbred MD were negative except those for the growth at days 20 and 43. The results indicate the importance of selecting superior hybrid varieties if the exploitation of hybrid vigor is considered in the Pacific abalone breeding program.

Crystallographic and NMR studies on sterols from green alga Chaetomorpha basiretorsa Setchell

Chemical investigation of the ethanol extract of the marine green alga Chaetomorpha basiretorsa Setchell led to the isolation of a new sterol stigmast-4,28-dien-3 alpha 6 beta-diol 1 in addition to the five known sterols of beta-lawsaritol 2, saringosterol 3, 24-hydroperoxy-24-vinyl - cholesterol 4, beta-stigmasterol 5, 29-hydroxystigmasta-5, 24(28) -dien-3 beta-ol 6. Compounds were isolated by normal phase silica gel and Sephadex LH - 20 gel colum chromatography, reverse phase HPLC and recrystalization. Their structures were elucidated by spectroscopic methods including MS, IR 1D/2D NMR and X-ray analysis. Cytotoxicity of compounds was screened by using the standard WIT method. All these compounds were isolated from the green alga Chaetomorpha basiretorsa Setchell for the first time and they were inactive (50% inhibitory concentration was greater than 10 mu g /cm(3)) against KB, Bel -7402, PC - 3M, Ketr 3 and MCF - 7 cell lines.

Structural studies on a novel fucogalactan sulfate extracted from the brown seaweed Laminaria japonica

A low molecular weight fucogalactan, obtained from the brown seaweed Laminaria japonica, was separated into three fractions (LF1, LF2 and LF3) by DEAE-Sepharose FF column chromatography. All three fractions contained predominantly fucose, sulfate group and galactose. The results showed that the main fraction LF2 consisted of L-fucose, D-galactose and sulfate at a molar ratio 6:1:9. Structural study on the LF2 was carried out by NMR spectroscopy. The backbone of LF2 was primarily (1 -> 3)-linked alpha-L-fucopyranose residues (75%) and a few (1 -> 4)-alpha-L-fucopyranose linkages (25%). The branch points were at C-4 of 3-linked alpha-L-fucopyranose residues by beta-D-galactopyranose unites (35%, molar ratio) or at C-2 of 3-linked alpha-L-fucopyranose residues by non-reducing terminal fucose unites (65%, molar ratio). Sulfate groups occupied at position C-4 or C-2, sometimes C-2, 4 to fucose residues, and C-3 and/or C-4 to galactose residues. The structure of LF2 was supposed as following: [GRAPHICS] (C) 2010 Elsevier B.V. All rights reserved.

Hydrothermal synthesis and crystal structure of cluster compound {[Ni(enMe)(2)][SiW12O40]}[Ni(enMe)(2)(H2O)(2)](2) center dot 3H(2)O

the novel One-dimensional chain structure of the title cluster compound was synthesized and characterized by elemental analysis, IR spectra, TGA and X-ray single-crystal diffraction. The title cluster compound crystallized in a monochnic system with space group C2/c, a = 1.2656 nm, b = 2.20656 (4) nm, c =2.26763 (4) nm, beta = 92.078 degrees, V = 6.32852 (16) nm(3), Z = 4, D-c = 3.801 g/cm(3), A = 2.271 mm(-1), F(000) = 6512, R-1= 0.0549, wR(2) = 0.1087. The structure building block of the structure is the polyanion [SiW12O40](6-) with alpha-Keggin structure. The clusters were linked together with one-dimensional infinite chain through [ Ni ( enMe) (2)] (2+) cations. The [ Ni ( enMe) (2) ( H2O) (2)] (2+) cations and water molecules were filled in the structure. The cluster compound was expanded to three-dimensional framework by hydrogen bond interactions among molecules.

青藏苔草的组织培养和快速繁殖

1植物名称青藏苔草(Carex moorcroftii Falc ex Boott)。2材料类别种子。3培养条件(1)诱导培养基:MS+NAA 0.5 mg•L~(-1) (单位下同)+6-BA 1+2,4-D 0.5;(2)继代培养基:MS+NAA 0.5+6-BA 0.5+2,4-D 2;(3)芽分化培养基:MS+6-BA 1+NAA 1;(4)生根培养基:1/2MS+ IAA 3。以上培养基中均附加3%蔗糖和0.7%琼脂,pH5.8。

HPLC法同时测定2种獐牙菜中4种苷类成分

建立并检测印度獐牙菜和川西獐牙菜中獐牙菜苦苷、龙胆苦苷、芒果苷、异荭草苷4种苷类成分含量的反相高效液相色谱分析方法.结果表明,该方法简单,准确,快速,可作为獐牙菜类药材的质量控制依据.

繁殖期高原鼠兔的行为时间分配与后代存活率的关系

2002年4-8月份,在中国科学院海北高寒草甸生态系统定位站附近,采用标志流放、直接观察法和解剖法对青藏高原特有的植食性小哺乳动物——高原鼠兔（Ochotona curzoniae）的行为时间分配、繁殖特征和后代存活率等方面进行了研究.结果表明,雌、雄成体平均地面活动时间占总时间的比例分别为88.67%和89.88%,在不同的繁殖时段,成体的各种行为时间分配存在显著的变化,并影响后代的存活率.幼体从出生到15 d的存活率和雌、雄性成体的每次移动距离以及雌性成体的地面活动强度都显著的正相关;从15 d到45 d的存活率和雄性成体的地面活动强度、观望强度显著的正相关.在相同的观察时期,高原鼠兔雌、雄成体的一些行为时间分配存在显著差异,如雄性成体地面移动距离、频次在繁殖前期显著的高于雌性成体;雄性成体的观望强度在6、7月份显著高于雌性成体.说明雄性成体在领域防卫中较雌性成体承担更多的责任,雌、雄成体在育幼活动中的繁殖投入存在互补性。

肯塔基草地早熟禾愈伤组织的诱导及再生体系的建立

以肯塔基草地早熟禾成熟种子为外植体,研究了影响愈伤组织诱导、分化以及再生苗生根、移栽的主要因素,建立了肯塔基草地早熟禾高频再生体系.结果表明,在MS培养基上,低浓度的BA(0.1mg/L)配合2,4-D(3.0 mg/L)诱导肯塔基草地早熟禾种子出愈率达到74.9士7.35%;0.1mg/L 2,4-D在SH培养基上诱导愈伤组织分化成芽,分化率平均每块愈伤可达8.1土0.36个芽;最适生根条件为1/2MS+1.0mg/L NAA.

唐古特大黄的离体快速繁殖

1植物名称唐古特大黄(Rheum tanguticum),又名鸡爪大黄.2材料类别无菌种子苗.3培养条件种子萌发培养基:(1)MS无激素培养基.前期分化培养基:(2)MS+2,4-D 1 mg?L-1(单位下同)+KT 1+ZT 0.5+6-BA 0.5.后期分化培养基:(3)MS+2,4-D 1+KT 2+ZT 0.5+6-BA 1.以上3种培养基均附加CH 300、肌醇200、3%蔗糖、5 g?L-1琼脂粉.生根培养基:(4)MS+NAA 1+3%蔗糖;(5)1/2MS+NAA 1+3%蔗糖;(6)1/2MS+NAA0.5+1.5%蔗糖;(7)1/2MS+NAA 0.5+3%蔗糖;(8)1/2MS+NAA 1+1.5%蔗糖.pH 5.8.培养温度为(25±1)℃,光源为日光灯,光照度为2 000～3 000 lx,光照时间12 h?-1

藏药7号水提液对大鼠离体胸主动脉条收缩作用的影响

目的通过观察藏药7号水提液对大鼠离体胸动脉条收缩作用的影响,研究藏药7号的降压机制.方法以生理盐水作为对照组,观察藏药7号水提液(6 g/L)和维拉帕米(Ver 0.013 g/L)对高K+液引起的主动脉条收缩的时效影响,观察对KCl、NE及CaCl2引起的大鼠主动脉条收缩的量效曲线的影响,以及对NE引起的依赖于细胞内钙及细胞外钙收缩的影响.结果藏药7号水提液抑制高K+液引起的主动脉收缩(P<0.001);而且可以使KCl、NE及CaCl2引起的大鼠主动脉条收缩的量效曲线非平行右移,最大效应降低,呈非竞争性拮抗作用(P<0.05);与维拉帕米相似,并且对NE引起的依赖于细胞内钙及细胞外钙的收缩均有抑制作用(P<0.05).结论提示藏药7号的降压机制与钙离子通道拮抗剂一致,而且其作用效果比Ver平稳,其最大作用与Ver相近.

青藏高原高寒灌丛生态系统二氧化碳通量研究

本论文以青藏高原东北部海北地区高寒灌丛（Alpine Shrub）生态系统为研究对象，利用微气象观测系统及涡度相关（Eddy Covariance）技术，自2003年1月1日至2005年12月31日对该类广布于青藏高原的典型高寒草地类型进行长期连续观测。在对生态系统CO2净交换（NEE）以及群落叶面积指数（LAI）、生物量等生物学指标和光合有效辐射（PAR）、温度、土壤水分、脉冲性降水事件等主要环境因子进行连续监测的基础上，重点分析和探讨了海北地区高寒灌丛生态系统净生态系统CO2交换(NEE)在时、日、月及年际尺度上的变化模式，生长季与非生长季高寒灌丛生态系统CO2净交换特征，高寒灌丛生态系统大气CO2源/汇年际差异，土壤温度、昼夜温差、光合有效辐射、脉冲性降水事件等主要环境因子影响。从而，揭示了不同时间尺度下的高寒灌丛生态系统NEE变化规律，阐明主要环境因子对生态系统NEE的影响，明确了该生态系统大气CO2源/汇状况及其季节分布模式；同时，也为青藏高原区域尺度的高寒草地生态系统CO2通量研究和碳收支的估算提供科学依据和基础数据，对进一步揭示我国乃至亚洲陆地生态系统的碳收支状况有着重要意义。主要研究结果概括为以下几个方面： 1、海北地区高寒灌丛生态系统净生态系统CO2交换时动态特征存在很大的季节性差异，暖季小时NEE变化振幅大，CO2净吸收的极值一般出现在午间，最大吸收量为1.7 g CO2 m-2 h-1左右。夜间为CO2净释放，净生态系统交换值较为稳定（0.5~ 0.9 g CO2 m-2 h-1）；冷季日变化振幅极小，除14:00~18:00时一定量CO2释放外，其余时段通量均很小。 2、从日平均净生态系统CO2交换来看，6~9月日平均NEE一般为负值（CO2净吸收），2003~2005年6~9 月间日平均NEE分别为-5.65 g CO2 m-2 d-1、-6.08 g CO2 m-2 d-1和-4.81 g CO2 m-2 d-1；而10~12月及翌年1~5月期间日平均NEE通常为正值（CO2净释放），该时段3年高寒灌丛日平均净生态系统CO2交换分别为1.91 g CO2 m-2 d-1、1.90 g CO2 m-2 d-1和2.19 g CO2 m-2 d-1。2003~2004年高寒灌丛生态系统CO2净释放维持天数分别为249 d、 254 d和264 d，2003年净释放维持天数最少，而净吸收维持天数2005年最少（101d）。2003、2004和2005年全年日平均CO2净吸收分别为0.611 g CO2 m-2 d-1、0.759 g CO2 m-2 d-1和0.167 g CO2 m-2 d-1。 3、就季节差异而言，2003、2004和2005年整个生长季节高寒灌丛平均CO2日净生态系统交换分别为-3.99 g CO2 m-2 d-1、-4.59 g CO2 m-2 d-1、-3.27 g CO2 m-2 d-1。7、8月生长季节CO2净吸收的最高，2003、2004、2005年7月和8月份高寒灌丛生态系统CO2净吸收分别为222 g CO2 m-2 和224 g CO2 m-2、355 g CO2 m-2和216 g CO2 m-2、263 g CO2 m-2和186 g CO2 m-2。在相对短暂的生长季节海北地区高寒灌丛生态系统表现出显著的大气CO2净吸收能力，2003、2004和2005年生长季节高寒灌丛生态系统CO2净吸收量分别为610 g CO2 m-2、701 g CO2 m-2和500 g CO2 m-2。相对于温度等环境因子，高寒灌丛生态系统生长季白昼NEE小时变化规律更受光合有效辐射变化的影响。 4、2003～2005年非生长季节日平均NEE分别为1.83 g CO2 m-2、2.01 g CO2 m-2和2.07 g CO2 m-2。4月和10月是非生长季节CO2净释放的最高月份，2003、2004和2005年全月净释放量为105 g CO2 m-2和77 g CO2 m-2、105 g CO2 m-2和117 g CO2 m-2及105 g CO2 m-2和138 g CO2 m-2，2003～2005年整个非生长季CO2净释放分别为CO2为388 g CO2 m-2、425 g CO2 m-2和439 g CO2 m-2。非生长季节海北地区高寒灌丛生态系统NEE小时变化与5 cm土壤温度存在极显著的正相关关联，表明在非生长季节土壤温度是影响青藏高原高寒灌丛生态系统NEE的重要环境因子。 5、从生态系统CO2源/汇特征来看，海北地区高寒灌丛生态系统2003、2004和2005年全年净CO2固定总量分别为223 g CO2 m-2 a-1、277 g CO2 m-2 a-1和61 g CO2 m-2 a-1，3年平均CO2值为187 g CO2 m-2 a-1。在为期3年的研究时段海北地区高寒灌丛生态系统表现为弱的大气二氧化碳的汇。 6、高寒灌丛群落表观光合量子产额（a）和表观最大光合速率（Pmax）受叶面积指数的影响。在6～9月份期间，由于LAI的不同，a和Pmax值差异明显，7、8月份较高而6月和9月明显较低。海北地区高寒灌丛生态系统a和Pmax值高于西藏当雄地区高寒草甸生态系统，但低于平原地区相关生态系统。 维持天数2005年最少（101d）。2003、2004和2005年全年日平均CO2净吸收分别为0.611 g CO2 m-2 d-1、0.759 g CO2 m-2 d-1和0.167 g CO2 m-2 d-1。 3、就季节差异而言，2003、2004和2005年整个生长季节高寒灌丛平均CO2日净生态系统交换分别为-3.99 g CO2 m-2 d-1、-4.59 g CO2 m-2 d-1、-3.27 g CO2 m-2 d-1。7、8月生长季节CO2净吸收的最高，2003、2004、2005年7月和8月份高寒灌丛生态系统CO2净吸收分别为222 g CO2 m-2 和224 g CO2 m-2、355 g CO2 m-2和216 g CO2 m-2、263 g CO2 m-2和186 g CO2 m-2。在相对短暂的生长季节海北地区高寒灌丛生态系统表现出显著的大气CO2净吸收能力，2003、2004和2005年生长季节高寒灌丛生态系统CO2净吸收量分别为610 g CO2 m-2、701 g CO2 m-2和500 g CO2 m-2。相对于温度等环境因子，高寒灌丛生态系统生长季白昼NEE小时变化规律更受光合有效辐射变化的影响。 4、2003～2005年非生长季节日平均NEE分别为1.83 g CO2 m-2、2.01 g CO2 m-2和2.07 g CO2 m-2。4月和10月是非生长季节CO2净释放的最高月份，2003、2004和2005年全月净释放量为105 g CO2 m-2和77 g CO2 m-2、105 g CO2 m-2和117 g CO2 m-2及105 g CO2 m-2和138 g CO2 m-2，2003～2005年整个非生长季CO2净释放分别为CO2为388 g CO2 m-2、425 g CO2 m-2和439 g CO2 m-2。非生长季节海北地区高寒灌丛生态系统NEE小时变化与5 cm土壤温度存在极显著的正相关关联，表明在非生长季节土壤温度是影响青藏高原高寒灌丛生态系统NEE的重要环境因子。 5、从生态系统CO2源/汇特征来看，海北地区高寒灌丛生态系统2003、2004和2005年全年净CO2固定总量分别为223 g CO2 m-2 a-1、277 g CO2 m-2 a-1和61 g CO2 m-2 a-1，3年平均CO2值为187 g CO2 m-2 a-1。在为期3年的研究时段海北地区高寒灌丛生态系统表现为弱的大气二氧化碳的汇。 6、高寒灌丛群落表观光合量子产额（a）和表观最大光合速率（Pmax）受叶面积指数的影响。在6～9月份期间，由于LAI的不同，a和Pmax值差异明显，7、8月份较高而6月和9月明显较低。海北地区高寒灌丛生态系统a和Pmax值高于西藏当雄地区高寒草甸生态系统，但低于平原地区相关生态系统。

基于三重震相波形模拟研究亚洲东北部上地幔过渡带速度结构

Both the global and regional P wave tomographic studies have revealed significant deep structural heterogeneities in subduction zone regions. In particular, low-velocity anomalies have been observed beneath the descending high-velocity slabs in a number of subduction zones. The limited resolution at large depths and possible trade-off between the high and low velocities, however, make it difficult to substantiate this feature and evaluate the vertical extent of the low-velocity structure. From broadband waveform modeling of triplicated phases near the 660-km discontinuity for three deep events, we constrained both the P and SH wave velocity structures around the base of the upper mantle in northeast Asia. For the two events beneath the southern Kurile, the rays traveled through the lowermost transition zone and uppermost lower mantle under the descending Pacific slab. Our preferred models consistently suggest normal-to-lower P and significantly low SH velocities above and below the 660-km discontinuity extending to about 760-km depth compared with the global IASP91 model, corroborating previous observations for a slow structure underneath the slab. In contrast, both high P and SH velocity anomalies are shown in our preferred models for the Japan subduction zone region, likely reflecting the structural feature of a slab stagnant above the 660-km discontinuity. The velocity jumps across the 660-km discontinuity were found to be on average 4.5% and 7% for P and S waves under the south Kurile, and 3% and 6% under the Japan subduction zone. The respective velocity contrasts in the two regions are consistent with mineralogical models for colder slab interior and hotter under-slab areas. Based on mineral physics data, the depth-averaged ~1.5% P and ~2.5% SH velocity differences in the depth range of 560-760 km between the two regions could be primarily explained by a 350~450K temperature variation, although the presence of about 0.5wt%~1wt% water might also contribute to the subtle velocity variations near the base of the transition zone in the southern Kurile. From our modeling results, we speculate that the slow structure in the southern Kurile may be correlated to the low velocity zone observed previously around the 410-km discontinuity under Northern Honshu. Both are probably associated with a thermal anomaly rooted in the lower mantle beneath the subduction zone in northeast Asia.

准噶尔盆地热历史与油气

Based on the temperature data from 196 wells and thermal conductivity measurements of 90 rock samples, altogether 35 heat flow data are obtained. The results show that the Junggar basin is a relatively "cold basin" at present. The thermal gradients vary between 11.6 and 26.5 ℃/km, and the thermal conductivity change from 0.17 to 3.6 W/mK. Heat flow ranges from 23.4 to 53.7 mW/m~2 with a mean of 42.3 ± 7.7 mW/m~2. The heat flow pattern shows that heat flow is higher on the uplifts and lower on the depressions. The overall low present-day heat flow in the Junggar Basin reflects its stable cratonic basement and Cenozoic tectonothermal evolution characterized by lithospheric thickening, thrust and fault at shallow crust as well as consequently quick subsidence during the Late Cenozoic. The study of the basin thermal history, which is one of the important content of the basin analysis, reveals not only the process of the basin's tectonothermal evolution, but also the thermal evolution of the source rocks based on the hydrocarbon generation models. The latter is very helpful for petroleum exploration. The thermal history of the Junggar basin has been reconstructed through the heat flow based method using the VR and Fission track data. The thermal evolutions of main source rocks (Permian and Jurassic) and the formations of the Permian and the Jurassic petroleum systems as well as the influences of thermal fields to petroleum system also have been discussed in this paper. Thermal history reconstruction derived from vitrinite reflectance data indicates that the Paleozoic formations experienced their maximum paleotemperature during Permian to Triassic with the higher paleoheat flow of around 70-85 mW/m~2 and the basin cooled down to the present low heat flow. The thermal evolution put a quite important effect on the formation and evolution of the petroleum system. The Jurassic petroleum system in the Junggar basin is quite limited in space and the source rocks of Middle-Lower Jurassic entered oli-window only along the foreland region of the North Tianshan belt, where the Jurassic is buried to the depth of 5-7 km. By contrast, the Middle-Lower Permian source rocks have initiated oil and gas generation in latter Permian to Triassic, and the major petroleum systems, like Mahu-West Pen 1 Well, was formed prior to Triassic when later Paleozoic formation reached the maximum paleotemperature.

孤东油田馆陶组河流相储层流动单元模型与剩余油分布规律研究

Since C.L. Hearn presented the concept of flow unit in 1984, its generation mechanisms and controlling factors have been studied in many aspects using different methods by researchers. There are some basic methods to do the research, and there are several concepts and classification standards about flow unit. Based on previous achievements and using methodologies from sedimentary geology, geophysics, seismic stratigraphy, and reservoir engineering, the author systemically studies the factors controlling flow unit, puts forward a series of methods for recognition, classification and evaluation of flow unit. The results obtained in this paper have important significance not only for understanding the flow unit, but also for revealing the distribution of remaining oil. As a case, this paper deals with the reservoir rocks in Guantao Group of Gudong Oilfield. Zhanhua Sag, Jiyang Depression in Bohaiwan Basin. Based on the study of stratigraphic, depositional and structural characteristics, the author establishes reservoir geological models, reveals the geological characteristics of oil-bearing reservoir of fluvial facies, points out the factors controlling flow unit and geological parameters for classification of flow unit. and summarizes methods and technologies for flow unit study when geological, well-logging and mathematical methods are used. It is the first attempt in literatures to evaluate reservoir by well-logging data constrained by geological conditions, then a well-logging evaluation model can be built. This kind of model is more precise than ever for calculating physical parameters in flow unit. In a well bore, there are six methods to recognize a flow unit. Among them, the activity function and intra-layer difference methods are the most effective. Along a section, the composition type of flow unit can be located according amplitude and impedance on seismic section. Slice method and other methods are used to distinguish flow unit. In order to reveal the distribution laws of flow unit in space, the author create a new method, named combination and composition of flow unit. Based on microscopic pore structure research, the classification methods of flow unit are developed. There are three types of flow unit in the reservoir of fluvial facies. They have their own lithology, petrophysics and pore structure character. Using judgement method, standard functions are built to determine the class of flow unit of fluvial facies. Combining reservoir engineering methods, the distribution laws of remaining oil in different types, or in different part of a flow unit are studied. It is evident that the remaining oil is controlled by the type of flow unit. The author reveals the relationship between flow unit and remaining oil distribution, builds the flowing models, predicts the variation of reservoir parameters in space, put forward different methods developing remaining oil in different flow unit. Especially, based on the results obtained in this paper, some suggestions for the adjustment of the developing flow units have been applied in Districts No.4 and No.7, and good results have been yielded. So, the results of this paper can guide oil field development. They are useful and significant for developing the remaining oil and enhancing the oil recovery efficiency.