PSAN/PMMA共混体系相分离动力学的光散射研究

本工作用小角激光光散射（SALS）研究了Poly (Styrene -co-acrylontrile)/Poly (methyl methacrylate)共混体系的相分离动力学。通过溶液共混得到的均相混合物淬火到较高温度的热力学不稳区，随着时间增长，体系相区及相区间及相区间的反应逐渐增大，对应SALS的V_v散射环逐渐变小，散射强度逐渐增大；在Cahn-Hilliard线性理论基础上测得体系相分离初期的增长速率及扩散系数，在相分离后期散射峰强Im和峰位qm与时间t满足幂指数关系：Im αt~θ、qm αt~(-θ)且θ ≈ 3φ；光散射积分不变量及相差显微镜观察表明在相分离后其发生了Ostwald Ripening，若减小体系PMMA分子量，相分离速率增大很快。

嵌段共聚物胶束溶液的热力学

本文对聚苯乙烯-氢化聚异式二烯（Poly (styrene-CO-ethylene )，简称SEP）在有机烃熔剂中胶束化过程的热力学性质作了较为深入的研究。研究结果表明，非线性的SEP共聚物在有机烃溶剂中的胶束化过程均为熵减过程，即在该体系中，聚合物分子从单个分子聚焦为胶束粒子是从无序到较为有序的过程，分子的构象数减少，这与离子型和非离子型表面活性剂在水中的胶束化过程相反；其次，SEP的ΔH°均为负值，说明胶表化过程是放热的，并且ΔH°的绝对值较大，说明胶束化过程明显地依赖于温度；溶剂的选择性越强，胶束化过程放热越少，熵减也减少，说明溶剂的选择性强有昨于胶束的形成。实验结果还反映了共聚物的分子量对胶束化过程的热力学函数值ΔS°和ΔH°也有影响。而自由能的变化ΔF°与离子和非离子型表面活性剂类似，这是共聚物和表面活性剂胶束化过程中的共同之处。结果还表明，溶剂的选择性越强，胶束的分子聚焦数均值（N）越大，而溶剂的选择性越强，N和第二维里系数（A_2）的温度依赖性越小；相同溶剂中温度越高，N越小，A_2越大。本文还研究了SEP共聚物溶液的[7]随溶剂配比的变化，以及SEP溶液粘度对浓度和温度的依赖性。通过溶液粘度的测定可知，胶束中分子聚集紧密，胶束粒子接近于球体模型；溶剂的选择性越强，分子聚集得越紧密。实验还发现，比浓粘度在临界胶束浓度处出现转折点，并与光散射测得的值一致。本工作用小角激光光散射仪（LALLS）测定共聚物在选择性溶剂中的临界胶束浓度（CMC），这在文献中还未见报导。

苯乙烯－已内酯两嵌段共聚物及共混物的结构研究

本论文采用阴离子逐步加料方法，成功地合成了各种组成法的PS－b－PCL嵌段共聚物。通过对PS－b－PCL嵌段共聚物的微相结构的透射电镜观察发现PS－b－PCL随PCL含量的不同及制样条件的变化，可以形成不同的微相结构。在PS－b－PCL/PCL共混体系中，发现了体系可以形成规则的环状球晶，而且消光环之间的距离随嵌段共聚物含量增加而减小，同时还发现环状球晶中有更细微的结构。

稀土催化苯乙稀与异戊二烯活性聚合及其嵌段共聚的研究

本论文以均相二元催化体系－L_2LnX/R_3Al（催化剂I）和改性的均相三元催化体系L_2LnX/R_3Al/RX（催化剂II），系统地研究了各种因素对苯乙烯（St）和异戊二烯（Ip）均聚及共聚合反应的影响。首次用稀土催化剂（II）实现了St/Ip嵌段共聚反应，由此发现一种新型活性聚合稀土催化剂。

Cyclopropanation on a highly active heterogeneous catalyst: CuO/TiO2-Al2O3

Some heterogeneous catalysts, cupric oxide supported on different supports, were prepared and employed to catalyze the cyclopropanation of styrene and 2,5-dimethyl-2,4-hexadiene with ethyl diazoacetate (EDA). The catalytic performance for cyclopropanation strongly depends on the nature of the support. A novel catalyst, CUO/TiO2-Al2O3, in which Al2O3 is modified with a monolayer TiO2, is found to be most active and selective for the cyclopropanation reaction. The yields of 93 and 94% cyclopropanes are obtained for styrene and 2,5-dimethyl-2,4-hexadiene at 40 degreesC as the substrates, respectively. The activity and selectivity in cyclopropanes are optimized with a monolayer dispersion of cupric oxide on the corresponding supports. (C) 2002 Elsevier Science B.V. All rights reserved.

A strategy for synthesis of ion-bonded supramolecular star polymers by reversible addition-fragmentation chain transfer (RAFT) polymerization

We have developed a novel strategy for the preparation of ion-bonded supramolecular star polymers by RAFT polymerization. An ion-bonded star supramolecule with six functional groups was prepared from a triphenylene derivative containing tertiary amino groups and trithiocarbonate carboxylic acid, and used as the RAFT agent in polymerizations of tert-butyl acrylate (tBA) and styrene (St). Molecular weights and structures of the polymers were characterized by H-1 NMR and GPC. The results show that the polymerization possesses the character of living free-radical polymerization and the ion-bonded supramolecular star polymers PSt, PtBA, and PSt-b-PtBA, with six well-defined arms, were successfully synthesized.

A strategy for synthesis of ion-bonded amphiphilic miktoarm star copolymers via supramolecular macro-RAFT agent

Amphiphilic supramolecular miktoarm star copolymers linked by ionic bonds with controlled molecular weight and low polydispersity have been successfully synthesized via reversible addition-fragmentation chain transfer (RAFT) polymerization using an ion-bonded macromolecular RAFT agent (macro-RAFT agent). Firstly, a new tetrafunctional initiator, dimethyl 4,6-bis(bromomethyl)-isophthalate, was synthesized and used as an initiator for atom transfer radical polymerization (ATRP) of styrene to form polystyrene (PSt) containing two ester groups at the middle of polymer chain. Then, the ester groups were converted into tertiary amino groups and the ion-bonded supramolecular macro-RAFT agent was obtained through the interaction between the tertiary amino group and 2-dodecylsulfanylthiocarbonylsulfanyl-2-methyl propionic acid (DMP). Finally, ion-bonded amphiphilic miktoarm star copolymer, (PSt)(2)-poly(N-isopropyl-acrylamide)(2), was prepared by RAFT polymerization of N-isopropylacrylamide (NIPAM) in the presence of the supramolecular macro-RAFT agent. The polymerization kinetics was investigated and the molecular weight and the architecture of the resulting star polymers were characterized by means of H-1-NMR, FTIR, and GPC techniques. (c) 2008 Wiley Periodicals, Inc.

Numerical Simulation of Reactive Extrusion Processes for Activated Anionic Polymerization

In order to deal with the complicated relationships among the variables of the reactive extrusion process for activated anionic polymerization, a three-dimensional equivalent model of closely intermeshing co-rotating twin screw extruders was established. Then the numerical computation expressions of the monomer concentration, the monomer conversion, the average molecular weight and the fluid viscosity were deduced, and the numerical simulation of the reactive extrusion process of Styrene was carried out. At last, our simulated results were compared with Michaeli's simulated results and experimental results. (C) 2007 Elsevier B.V. All rights reserved

Temperature Dependence of Surface Composition and Morphology in Polymer Blend Film

Thin films of poly(methyl methacrylate) (PMMA) and poly(styrene-ran-acrylonitrile) (SAN) blend can phase separate upon heating to above its critical temperature. Temperature dependence of the surface composition and morphology in the blend thin film upon thermal treatment was studied using in situ X-ray photoelectron spectroscopy (XPS) and in situ atomic force microscopy (AFM). It was found that in addition to phase separation, the blend component preferentially diffused to and aggregated at the surface of the blend film, leading to the variation of surface composition with temperature. At 185 degrees C, above the critical temperature, the amounts of PMMA and SAN phases were comparable.

Thiophene-NPN Ligand Supported Rare-Earth Metal Bis(alkyl) Complexes. Synthesis and Catalysis toward Highly trans-1,4 Selective Polymerization of Butadiene

A series of new rare-earth metal bis(alkyl) complexes [L(1-3)Ln(CH2SiMe3)(2)(THF)(n)] (L-1 = MeC4H2SCH2NC6H4(Ph)(2)P=NC6H2Me3-2,4,6: Ln = Sc, n = 1 (1a); Ln = Lu, n = 1 (1b); L-2 = MeC4H2SCH2NC6H4(Ph)(2)P=NC6H3Et2-2,6: Ln = Sc, n = 1 (2a); Ln = Lu, n = 1 (2b); Ln = Y, n = 1 (2c); L-3 = MeC4H2SCH2NC6H4(Ph)(2)P=(NC6H3Pr2)-Pr-i-2,6: Ln = Sc, n = 0 (3a)) and (LSc)-Sc-4(CH2SiMe3)(2()THF) (4a) (L-4 = C6H5CH2NC6H4(Ph)(2)P=NC6H3Et2-2,6) have been prepared by reaction of rare-earth metal tris(alkyl)s with the corresponding HL1-4 ligands via alkane elimination.

Highly 3,4-selective living polymerization of isoprene with rare earth metal fluorenyl N-heterocyclic carbene precursors

Fluorenyl modified N-heterocyclic carbene ligated rare earth metal bis(alkyl) complexes, (Flu-NHC)Ln(CH2SiMe3)2 (Flu-NHC = (C13H8CH2CH2(NCHCCHN)C6H2Me3-2,4,6); Ln = Sc (1a); Ln = Y (1b); Ln = Ho (1c); Ln = Lit (1d)), were synthesized and fully characterized by NMR and X-ray diffraction analyses. Complexes Ib-d with the activation of (AlBu3)-Bu-i and [Ph3C][B(C6F5)4] exhibited high activity, medium syndio-but remarkably high 3,4-regio-selectivity, and the unprecedented livingness for the polymerization of isoprene. Such distinguished catalytic performances could be maintained under various monomer-to-initiator ratios (500-5000) and broad polymerization temperatures (25-80 degrees C).

Well-defined higher-molecular-weight polyacrylonitrile via RAFT technique in the presence of disulfide compounds as a source of chain transfer agent

Well-defined polyacrylonitrile with a higher number-average molecular weight (R.) up to 200,000 and a lower polydispersity index (PDI, 1.7-2.0) was firstly obtained via reversible addition-fragmentation chain transfer (RAFT) process. This was achieved by selecting a stable, easy way to prepare disulfide compound intermediates including bis(thiobenzoyl) disulfide (BTBDS) and bis(thiophenylacetoyl) disulfide (BTPADS) to react with azobis(isobutyronitrile) to directly synthesize RAFT agents in situ.