MF_2:Eu,Ce(M=Ca,Sr,Ba)中稀土离子的价态变化

我们已经实验证明并报道了Eu-Tb之间、Ce-Yb之间的电荷转移.本文首次实验证实了Ce~(3+)离子和Eu~(3+)离子之间电荷转移现象的存在,进一步阐述了稀土价态与其电子组态共轭特征的相关性.1 实验部分1.1 试剂CaF_2,SrF_2,BaF_2,NH_4HF_2、氢氟酸、盐酸均为分析纯,EuF_3和CeF_3分别由高纯Eu_2O_3(99.95%)及CeO_2(99.99%)自制.1.2 MF_2:Eu,Ce体系的合成按化学计量比(MF_2:X%CeF_2,y%EuF_3;X=1,y=0,0.1,0.3,0.5,1;X=0,0.05,0.1,0.3,0.5,y=1)准确称取原料,放人玛瑙研钵中充分研混后装入刚玉柑涡中,置于管状炉内(用氢气

THE SYNTHESIS AND PHYSICAL-PROPERTIES OF THE NEW LAYERED LANTHANIDE ALKALINE-EARTH COBALT OXIDES [LN2MCO2O7 (LN=SM,GD M=SR,BA)]

Three new oxides Sm2SrCo2O7, Sm2BaCo2O7 and Gd2SrCo2O7 have been successfully synthesized by a solid state reaction method.The X - Ray diffraction spectra show that they are all isostructural with Sr8Ti 2O7, Ln2SrCo2O7(Ln=Sm, Gd) crystallized in the tetra

A STUDY OF SITE OCCUPATION OF EU-3+ IN ME2Y8(SIO4)6O2 (ME=MG, CA, SR)

Alkaline earth (Mg, Ca. Sr) yttrium silicate oxyapatites doped with Eu3+ show red luminescence with comparable intensity. In this system of phosphors, the Eu3+ ions enter 4f sites and 6h sites simultaneously according to the fluorescence spectra, in which

掺Ce~（3＋）、Tb~（3＋）的M_3Y_2（BO_3）_4（M＝Ca，Sr）

采用固相反应的方法；经二次灼烧合成了掺Ｃｅ（３＋）、Ｔｂ（３＋）的Ｃａ３Ｙ２（ＢＯ３）４和Ｓｒ３Ｙ２（ＢＯ３）４磷光体；分析了合成过程中铈的还原情况．用Ｘ－射线衍射分析确定了它们的结构均为正交晶系，空间群Ｐ２１ｃｎ测定了Ｃｅ（３＋）和Ｔｂ（３＋）在两种基质中的光谱，得到Ｃｅ（３＋）波长位移的某些规律，观察到Ｃｅ（３＋）对Ｔｂ（３＋）的敏化作用．

用WAXD和SAXS研究辐照聚酰胺1010结构

用ＷＡＸＤ和ＳＡＸＳ方法研究了聚酰胺１０１０的聚集态结构和结晶结构的辐射损伤过程和机理。辐射交联与裂解主要在非晶区和结晶表面或中间相发生；辐射损伤并从这里开始，随辐射剂量增大，非晶化逐渐向晶区伸展，有氢键的（０１０）晶面损伤几率高于（１００）晶面；辐射后效应导致新的交联与裂解生成，主要影响（０１０）晶面的形成与完善，使Ｌ１００及Ｗｃ变小。

THE VALENCY AND SPECTRA OF SAMARIUM IONS IN MF(2)-MGF2 (M=CA, SR, BA)

The phosphors MMgF(4)(M = Ca, Sr, Ba) doped with samarium ions are synthesized in different atmospheres using solid phase reaction at high temperature. Samarium has been first stabilized in the divalent state in SrMgF4 and BaMgF4 matrices. Effects of matrices on the valent state of samarium ions are briefly discussed.

MF_2-MgF_2(M=Ca,Sr,Ba)体系中钐离子的价态及光谱

高温固相反应合成了钐离子激活的MF_2-MgF_2磷光体,考察了合成条件及基质组成对钐离子价态的影响,并讨论了荧光光谱与基质及钐离子价态间的关系.

Ca、Sr掺杂的La_2NiO_4的电学性质

制备了一种新的固溶体La_(2-x)Ca_xNiO_4(0≤x≤1.4)并与固溶体La_(2-x)Sr_xNiO_4作了对比。它们都具有四方的K_2NiF_4结构,其晶胞参数和晶胞体积都随x的增加而减少。固溶体La_(2-x)Ca_xNiO_4的室温电阻率随x的增加而增加,而固溶体La_(2-x)Sr_xNiO_4的室温电阻率却随x增加而减小,这种电学性质上的差别可能是由于Sr或Ca掺杂后引起Ni的价态变化导致Ni~(3+)的电子构型转变而造成的。

La_(1-x)M_xFe_yCo_(1-y)O_3型复合氧化物(M=Sr,Ba)的合成、结构及电性能

钙钛矿型的稀土与过渡金属复合氧化物(ABO_3)及部分稀土为碱土金属置换的A_(1-x)M_xBO_3型复合物在最近20年来研究较多,并在催化气敏,超导等方面取得了良好进展。但对A_(1-x)M_xB_(1-y)N_yO_3型复合物却研究甚少。本文合成了一系列的La_(1-x)M_xFe_yCo_(1-y)O_3(M=Sr或Ba)钙钛矿型复合氧化物,研究了它们组成与电性的变化规律。

MeBeF_4(Me=Ca,Sr,Ba)中钐的价态及光谱

讨论了MeBeF_4基质中钐离子的光谱及价态.还原气氛中仅在SrBeF_4和BaBeF_4中观察到了Sm~(2+)的发射.

INVESTIGATION ON THE LUMINESCENCE PROPERTIES OF DY3+ AND EU3+ IN M3LN2(BO3)4 (M=CA, SR, BA, LN= LA, GD, Y)

In this paper, the luminescence properties of Dy3+ and Eu3+ in M3Ln2 (BO3)4 (M = Ca,Sr,Ba; Ln = La, Gd, Y) were systematically studied. The hypersensitive transitions of Dy3+ and Eu3+ were investigated in relation to the host compositions; the relationship between the energy of Eu3+ charge-transfer band and M2+ ion was discussed, and the concentration quenching of Dy3+ luminescence was reported.

THE COMPOSITIONS AND STRUCTURES OF SOME COMPOUNDS IN THE SYSTEM CA-SR-CU-O

The system of Ca-Sr-Cu-O have been investigated. Two new compounds with compositions Sr3Cu5O8+alpha and CaSrCu3O5+alpha have been discovered. Both are orthorhombic with a = 6.489, b = 11.280, c = 12.240 angstrom for CaSrCu3O5+alpha and a = 3.950, b = 11.479, c = 13.420 angstrom for Sr3Cu5O8+alpha. The X-ray powder data for CaSrCu3O5+alpha, Sr3Cu5O8+alpha, Sr2CuO3 and SrCuO2 are presented. The oxidation state of Cu ion and oxygen contents are analyzed by iodometric titration. Sr0.5Ca0.5CuO2 that has a similar structure with SrCuO2 has been found and its X-ray data are presented also.

尼龙-1010 SAXS研究

用一维电子密度相关函数方法,分析了国产尼龙-1010不同拉伸比时的SAXS现象,由实验相关函数曲线可算得长周期(L),中间层厚(d_(tr)),片晶层厚(d_?),非晶层厚(A_?),平均片层厚(d),积分不变量(Q),比内表面O_s以及(η_c-η_a)等数值及其变化规律。实验结果表明尼龙-1010的结晶结构是由结晶层、非晶层以及结晶-非品中间层三部分组成。

高Jc Ag-Bi-Pb-Sr-Ca-Cu-O超导材料

Bi_2Sr_2Ca_2Cu_3O_y-Ag_x、Bi_(1.7)Pb_(0.3)Sr_2Ca_2Cu_3O_y-Ag_x和Bi_(1.7)Pb_(0.3)Sr_2Ca_2Cu_(3.2)O_y-Ag_x系列的超导材料是用固相反应的方法合成的。原料为分析纯AgNO_3、PbO、Bi_2O_3、CaCO_3、SrCO~3和CuO。把试剂按所需配比混和研磨后,在800℃烧12h,研磨压片,片子在850℃烧结200h,破碎、研磨后,按配比加入AgNO_3·800℃灼烧12h,再次研磨、压片,850℃再烧结200h,炉冷至室温。