Possible way to synthesize superheavy element Z=117

Within the framework of the dinuclear system model, the production of superheavy element Z = 117 in possible projectile-target combinations is analysed systematically. The calculated results show that the production cross sections are strongly dependent on the reaction systems. Optimal combinations, corresponding excitation energies and evaporation channels are proposed, such as the isotopes Bk-248,Bk-249 in Ca-48 induced reactions in 3n evaporation channels and the reactions Sc-45+Cm-246,Cm-248 in 3n and 4n channels, and the system V-51+Pu-244 in 3n channel.

Isotopic dependence of production cross sections of superheavy nuclei in hot fusion reactions

The dinuclear system model has been further developed by introducing the barrier distribution function method in the process of heavy-ion capture and fusion to synthesize superheavy nuclei. The capture of two colliding nuclei, formation and de-excitation process of compound nucleus are decribed by using empirical coupled channel model, solving master equation numerically and statistical evaporation model, respectively. Within the framework of the dinuclear system model, the fusion-evaporation excitation functions of the systems Ca-48(Am-243, 3n-5n) (288-286)115 and Ca-48(Cm-248, 3n-5n)(293-291)116 are calculated, which are used for synthesizing new superheavy nuclei at Dubna in recent years. Isotopic dependence of production cross sections with double magic nucleus Ca-48 bombarding actinide targets U, Np, Pu, Am, Cm to synthesize superheavy nuclei with charged numbers Z=112-116 is analyzed systematically. Based on these analysis, the optimal projectile-target combination and the optimal excitation energy are proposed. It is shown that shell correction energy and neutron separation energy will play an important role on the isotopic dependence of production cross sections of superheavy nuclei.

Study of mass distributions of quasifission products based on dinuclear system

In the concept of dinuclear system, the quasifission rate from Kramers formula has been incorporated in the master equation in order to study the competition between fusion and qusifission. Mass yields of quasifission products of the three reactions Ca-48 + Pu-244, Ca-48 + U-238 and Fe-58 + Th-232 have been calculated, and the experimental data are reproduced very well, which is a critical test for the existing fusion model. Also we have shown the time evolution of the mass distributions of quasifission products, which provides valuable information of the process of competition between fusion and quasifission.

The influence of nuclear orientation in fusion dynamics

Fusion barriers have been calculated for different orientations of the axial symmetry axis of deformed projectile-and target-nucleus. Using the concept of dinuclear system, considering the strong competition between fusion and quasifission processes, by solving the master equation numerically to calculate the fusion probability of superheavy nuclei, we have estimated the dependence of the fusion probabilities for Ge-76 + Pb-208 and Ca-48 + Pu-244 on the orientation angles of the symmetry axis of projectile-and target-nucleus, which shows that belly-belly is the most favorable orientation for synthesizing superheavy nuclei.

Production cross sections of superheavy nuclei based on dinuclear system model

The barrier distribution function method is introduced in the dinuclear system model in the calculation of the transmission probability, which is the first stage in the synthesis of superheavy nuclei. Dynamical deformation and averaging collision orientations are considered in the calculation of the fusion probability by solving master equation numerically. Survival probability with respect to xn evaporation channel (x = 1-5) in the de-excitation process of the thermal compound nucleus is calculated, in which the level density of the Fermi-gas model is used. Production cross sections of a series of superheavy nuclei formed in the reactions taken magic and deformed nuclei as target in Ca-48 induced reactions are studied systematically. The calculated results are in good agreement with available experimental data. Isotopic dependence of the production cross sections in the reactions Ca-48 + Pu is analyzed.

Influence of Hypericum perforatum Extract on Piglet Infected with Porcine Respiratory and Reproductive Syndrome Virus

To study the influence of Hypericum perforatum extract (HPE) on piglets infected with porcine respiratory and reproductive syndrome virus (PRRSV), enzyme-labeled immunosorbent assay (ELISA) and cytopathic effect (CPE) were used to determine in vitro whether HPE could induce swine pulmonary alveolar macrophages (PAMs) to secrete IFN-gamma, and whether PRRSV titers in PAMs were affected by the levels of HPE-induced IFN-gamma. HPE (200 mg kg(-1)) was administrated by oral gavage to piglets infected with the PRRSV in vivo to observe whether HPE affected the viremia, lung viral titers, and weight gain of piglets infected with PRRSV. The results showed that HPE was capable of inducing PAMs to produce IFN-gamma in a dose dependent manner and HPE pretreatment was capable of significantly reducing PRRSV viral titers in PAMs (P<0.01). Administration of HPE to the PRRSV-infected animals significantly (P<0.05) reduced viremia over time as compared with the PRRSV-infected animals. But there was not significant decrease in lung viral titers at day 21 post-infection between the HPE-treated animals and the PRRSV-infected control piglets. There were no significant differences in weight gain over time among the HPE-treatment animals, the normal control, and the HPE control animals. The PRRSV-infected animals caused significant (P<0.01) growth retardation as compared with the HPE controls and the normal piglets. It suggested that HPE might be an effective novel therapeutic approach to diminish the PRRSV-induced disease in swine.

丰质子奇异轻核反应总截面测量

核反应总截面是表征原子核反应基本特征的一个基本量，从实验测得的核反应总截面中可以得到有关核反应、核结构和核内核子分布的信息。在由放射性束流所产生奇的结构与各种反应机制研究中，反应总截面的测量更是具有特殊的重要性，具有奇异晕核结构的核的一个典型的物理现象就是其反应总截面要比稳定核大很多，Tanihata等人最早就是通过对放射性束流的相互作用截面的测量发现了具有奇异结构的核，即中子晕核。这次实验结果得出的跟放射性奇异核性质等有关的一些有趣现象，为放射性束核物理的研究注入了新的活力。我们采用能量为80MeV/u的初级~(20)Ne束轰击3mm厚的初级Be靶，在RIBLL上测量了由初级靶上产生碎裂反应所得到的次级~(12)N, ~(17)F和~(17)Ne等质子滴线核在硅靶上的中能核反应总截面，从而进一步补充了现有的中能区奇异核反应总截面测量的空白，并对现有的数据进行了检验。由于~(12)N, ~(17)F和~(17)Ne都是有争议的可能具有奇异质子结构（质子晕或质子皮）的核，测量它们在中能区的核反应总截面，可以对上述说法的成立与否提供实验上的验证。在与相邻同位素核的反应截面测量结果的比较中，发现实验得出的这些奇异核的截面值都偏大，而且由相对论平均场（RMF）计算得到的它们的质子密度分布明显比中子分布松散的多，因此推断它们可能具有奇异质子分布结构。并且基于库仑修正后的微观Glauber模型的理论计算出这些奇异核反应截面的结果同我们得出的实验数据吻合得很好。为了更精确地进行奇异核反应总截面的测量，研制了两种双维位置灵敏平行板雪崩电离室（PPAC），可以放在待测硅靶前，用来选择小于一定入射角的次级束粒子，有助于得到更准确的结果。该PPAC的有效探测面积为50 * 50mm~2，分别采用电荷分除法和延迟线读出的方法确定入射粒子的位置，并具有结构简单、价格便宜的特点。用三组分α源(5.155Mev~(239)Pu, 5.486 Mev~(241)Am, 5.806Mev~(244)Cm) 对探测器进行了测试，由阴极电荷分除读出法得到的位置分辨（FWHM）约为1.5mm。

Sensitive, selective and label-free protein detection using a smart polymeric transducer and aptamer/ligand system

We have demonstrated a smart polymeric transducer and aptamer/intercalating dye system that allows the label-free detection of protein with high sensitivity and selectivity.

A facile approach to biodegradable poly(epsilon-caprolactone)-poly(ethylene glycol)-based polyurethanes containing pendant amino groups

A novel biodegradable poly(epsilon-caprolactone)-poly(ethylene glycol)-based polyurethanes (PCL-PEG-PU) with pendant amino groups was synthesized by direct coupling of PEG ester of NH2-protected-(aspartic acid) (PEG-Asp-PEG diols) and poly(epsilon-caprolactone) (PCL) diols with hexamethylene dissocyanate (HDI) under mild reaction conditions and by subsequent deprotection of benzyloxycarbonyl (Cbz) groups. GPC, H-1 NMR, and C-13 NMR studies confirmed the polymer structures and the complete deprotection. DSC and WXRD results indicated that the crystallinity of the copolymer was enhanced with increasing PCL diols in the copolymer. The content of amino group in the polymer could be adjusted by changing the molar ratio of PEG-Asp-PEG diols to PCL diols. Thus the results of this study provide a good way to prepare polyurethanes bearing hydrophilic PEG segments and reactive amino groups without complicated synthesis.

Biodegradable polyurethane based on random copolymer of L-lactide and epsilon-caprolactone and its shape-memory property

A series of biodegradable polyurethanes (PUs) are synthesized from the copolymer diols prepared from L-lactide and epsilon-caprolactone (CL), 2,4-toluene diisocyanate, and 1,4-butanediol. Their thermal and mechanical properties are characterized via FTIR, DSC, and tensile tests. Their T(g)s are in the range of 28-53 degrees C. They have high modulus, tensile strength, and elongation ratio at break. With increasing CL content, the PU changes from semicrystalline to completely amorphous. Thermal mechanical analysis is used to determine their shape-memory property. When they are deformed and fixed at proper temperatures, their shape-recovery is almost complete for a tensile elongation of 150% or a compression of 2-folds. By changing the content of CL and the hard-to-soft ratio, their T(g)s and their shape-recovery temperature can be adjusted. Therefore, they may find wide applications.

Shape-memory and biocompatibility properties of segmented polyurethanes based on poly(L-lactide)

A series of segmented poly (L-lactide)-polyurethanes (PLA-PU) were synthesized by a two-step method, with oligo-poly(L-lactide) (PLA) as the soft segments and the reaction product of 2,4-toluene diisocyanate(TDI) and ethylene glycol(EG) as the hard segments. The shape memory properties of PLA-PUs were examined. The processed PLA-PUs could recover almost 100% to their original shape within 10 degrees C from the lowest recovery temperature. In the recovery process, the PLA-PUs showed a maximum contracting stress of shape change in the range of 1.5-4 MPa depending on the PLA segmental length and the hard-segmental content and higher than that of poly (e-caprolactone polyurethane) (PCL-PU). Besides, the influence of deforming and fixing temperatures on shape memory properties of PLA-PU was studied in detail. They could affect not only the recovery temperature but also the maximum contracting stress. The experiments of cell incubation were used to evaluate the biocompatibility of PLA-PU. The results show that the biocompatibility of PLA-PU is comparable to that of the pure PLA. This kind of polyurethane can be used as implanted medical devices with a shape memory property.

A composite polymer film with both superhydrophobicity and superoleophilicity

A composite film composed of porous polyurethane (PU) and polystyrene (PS) microspheres with both superhydrophobicity and superoleophilicity has been prepared. In this film, the dual-scale structure enhances both the hydrophobicity and oleophilicity of the surface material. The composite film with such an 'intelligent' wettability property can be utilized to separate oil and water systems efficiently.

Synthesis and characterization of a novel biodegradable, thermoplastic polyurethane elastomer

A series of biodegradable, thermoplastic polyurethane elastomers poly (epsilon-caprolactone-co-lactide)polyurethane [PCLA-PU] were synthesized from a random copolymer Of L-lactide (LA) and epsilon-caprolactone (CL), hexamethylene diisocyanate, and 1,4-butanediol. The effects of the LA/CL monomer ratio and hard-segment content on the thermal and mechanical properties of PCLA-PUs were investigated. Gel permeation chromatography, IR, C-13 NMR, and X-ray diffraction were used to confirm the formation and structure of PCLA-PUs. Through differential scanning calorimetry, tensile testing, and tensile-recovery testing, their thermal and mechanical properties were characterized. Their glass-transition temperatures were below -8 degrees C, and their soft domains became amorphous as the LA content increased. They displayed excellent mechanical properties, such as a tensile strength as high as 38 MPa, a tensile modulus as low as 10 MPa, and an elongation at break of 1300%. Therefore, they could find applications in biomedical fields, such as soft-tissue engineering and artificial skin.