Cd-Pb复合污染条件下3种花卉植物的生长反应及超积累特性研究

采用水培实验方法,研究了3种耐性较强的花卉植物在Cd-Pb复合污染条件下的生长反应及可能的超积累特性.结果表明,花卉植物种不同,其对复合污染的生长反应也不同,它们的耐性大小顺序为蜀葵(AlthaearoseaCav.)>凤仙花(ImpatiensBalsaminaL.)>金盏菊(CalendulaofficinalisL.);Cd对植物生长的影响较大、Pb的影响相对较小.3种花卉植物对重金属的积累量都是根部大于地上部;蜀葵对重金属Cd具有很强的耐性和积累性,在Cd、Pb复合污染条件下极具植物修复的潜力.对于这3种花卉植物,Cd-Pb相互作用效应与多种因素有关,包括重金属之间的浓度组合、植物种和植株部位等,表现得极为复杂,不仅仅是单纯的加和、拮抗或协同作用.

平菇菌丝体对Cd、Pb及其复合污染的生长与富集响应

在PDA平板培养条件下,研究Cd、Pb及其复合污染对平菇菌丝体生长的影响以及平菇菌丝体对生长基质中Cd、Pb的生物富集作用.结果表明,在实验浓度范围内,菌丝生长势、菌落直径和菌丝体干重等均随着重金属浓度的增大而减弱(小)或降低.平菇菌丝体对Cd、Pb均具有生物富集作用,并且随着重金属浓度的增大菌丝体中重金属含量逐渐增大.Cd、Pb复合污染能促进平菇菌丝体对Pb的吸收,而抑制对Cd的吸收.

土壤有效态Pb和Cd与大蒜吸收Pb和Cd的关系

通过对大蒜的重金属添加土培试验,采用DTPA(二乙基胺五乙酸)为有效态铅、镉提取剂,对受试土壤进行浸提检测,分析Pb和Cd在大蒜不同部位的吸收、积累及其与土壤中有效态含量的相关性。根据GB 2762-2005《食品中污染物限量标准》中对食品中Pb、Cd的限量要求,初步确定了本试验条件下,土壤中重金属Pb、Cd有效态的临界值,并以此临界点评价该种土壤中Pb、Cd对大蒜的潜在污染。

细河流域土壤中Hg、Cd、Pb和Zn含量的空间分布特征

利用地统计学方法研究了沈阳市细河流域表层土壤中Hg、Cd、Pb和Zn含量的空间结构及其分布特征。结果表明,土壤中Hg、Cd、Pb和Zn的平均含量均高于其背景值;土壤Cd和Zn含量属中等程度的空间相关,Hg和Pb属于空间弱相关,其空间变异均为随机性因素和结构性因素共同作用的结果,但Cd和Zn含量主要受结构性因素影响,而Hg和Pb主要受随机性因素影响。土壤中Hg、Cd、Pb和Zn空间分布特征表明,4种重金属含量在上游较高,顺流而下含量明显下降;土壤中Hg和Pb含量最大值在四方台地区,Cd和Zn含量最大值分布在甘官和富官一带。细河流域土壤Hg、Cd、Pb和Zn含量空间分异是污水灌溉、固体废弃物堆放、农业生产及交通尾气等因素综合作用的结果。

Stripping voltammetric determination of Pb(II) and Cd(II) based on the multiwalled carbon nanotubes-Nafion-bismuth modified glassy carbon electrodes

In this work, a new method for the simultaneous determination of Pb(II) and Cd(II) on the multiwalled carbon nanotubes (MWNT)-Nafion-bismuth modified glassy carbon electrode (GCE) using square-wave anodic stripping voltammetry has been studied. Scanning electron microscopy was used to investigate the characteristics of the MWNT-Nafion-bismuth modified GCE.

Sensitive determination of Cd and Pb by differential pulse stripping voltammetry with in situ bismuth-modified zeolite doped carbon paste electrodes

Here we investigated the analytical performances of the bismuth-modified zeolite doped carbon paste electrode (BiF-ZDCPE) for trace Cd and Pb analysis. The characteristics of bismuth-modified electrodes were improved greatly via addition of synthetic zeolite into carbon paste. To obtain high reproducibility and sensitivity, optimum experimental conditions for bismuth deposition Were Studied.

Combining chemical reduction with an electrochemical technique for the simultaneous detection of Cr(VI), Pb(II) and Cd(II)

This work herein reports the approach for the simultaneous determination of heavy metal ions including cadmium (Cd(II)), lead (Pb(II)), and chromium (Cr(VI)) using a bismuth film electrode (BFE) by anodic stripping voltammertry (ASV). The BFE used was plated in situ. Due to the reduction of Cr(VI) with H2O2 in the acid medium, on one hand, the Cr(III) was produced and Cr(VI) was indirectly detected by monitoring the content of Cr(III) using square-wave ASV. On the other hand, Pb(II) was also released from the complex between Pb(II) and Cr(VI). Furthermore, the coexistence of the Cd(II) was also simultaneously detected with Pb(II) and Cr(VI) in this system as a result of the formation of an alloy with Bi. The detection limits of this method were 1.39 ppb for Cd(II), 2.47 ppb for Pb(II) and 5.27 ppb for Cr(VI) with a preconcentration time of 120 s under optimal conditions (S/N = 3), respectively. Furthermore, the sensitivity of this method can be improved by controlling the deposition time or by using a cation-exchange polymer (such as Nafion) modified electrode.

(PE-g-PB-g-PA6)接枝共聚物中PA6链段结晶行为研究

采用选择性溶剂交替抽提的方法提纯在PE-g-PB-g-MA/PA6共混物中原位生成的接枝共聚物PE-g-PB-g-PA6,通过TEM﹑XPS﹑XRD﹑DSC等方法研究了该接枝共聚物的形貌与结晶行为。结果表明,PA6链段的结晶受到相形貌和分子结构的限制,扩散速度降低,导致在通常的结晶速率条件下(10℃/min)结晶不完善。

Study of the mechanism of nanocrystalline Pb(Zr0.52Ti0.48)O-3 prepared by accelerated sol-gel process

Nanocrystalline Pb(Zr0.52Ti0.48)O-3 was prepared from lead acetate, zirconium oxynitrate and titanium tetra-n-butoxide by a sol-gel method. It is found that both the crystallization temperature of precursor PZT and PZT product size were increased with increase of V(C3H8O2)/V(H2O) ratio in solution used. At V(C3H8O2)/V(H2O) = 4.47 the gel was formed moderately quick, and the nanocrystalline PZT with uniform granularity and low crystallizing temperature could be obtained. The diameter of the final nanocrystalline was ranged 60similar to70 nm as measured by atomic force microscopy (AFM). The crystallizing temperature of the precursor PZT was 443degreesC and the crystallization reaction was completed at 500degreesC by DTA and TG. The sol-gel reaction process was monitored by FT-IR and XRD.

PB-g-PMMA核壳粒子的合成及其在PVC中的分散

聚丁二烯(PB)橡胶粒子与聚氯乙烯(PVC)不相容。采用乳液聚合手段,在聚丁二烯乳胶粒表层接枝与聚氯乙烯相容的聚甲基丙烯酸甲酯(PMMA)充当增容剂制备了聚丁二烯接枝聚甲基丙烯酸甲酯(PB g PMMA ,MB)核壳粒子。用熔融共混法制备了PVC/MB共混物。SEM照片表明,这种核壳结构的粒子在聚氯乙烯中的分散情况随着核壳比的不同而改变,当核壳质量比小于93/7时能够完全均匀地分散在PVC基体中,核壳质量比大于94/6时根本不能分散在PVC基体中,核壳质量比为93/7是粒子能否分散开的转折点。共混物的力学性能数据表明,当MB加入量改变时,共混物也存在脆韧转变点,但受MB粒子的核壳比影响。

ABS树脂合成中影响PB-g-SAN接枝共聚物接枝率的因素

采用种子乳液聚合方式 ,以 K2 S2 O8为引发剂引发聚合 ,合成了一系列 PB- g- SAN接枝共聚物。考察了引发剂用量、分子量调节剂 (TDDM)用量和橡胶 (PB)含量对 PB- g- SAN接枝共聚物接枝率的影响。并将 K2 S2 O8引发剂与氧化 -还原引发体系做了比较。结果表明 ,随着引发剂 K2 S2 O8用量逐渐增加 ,PB- g- SAN接枝共聚物的接枝率逐渐降低。引发剂用量太少时 ,不能满足聚合要求 ,PB- g- SAN接枝共聚物的接枝率也会降低。随着分子量调节剂 (TDDM)用量的增加 ,PB- g- SAN接枝共聚物的接枝率逐渐降低。随胶含量的增加 ,PB- g- SAN接枝共聚物的接枝率逐渐降低。采用氧化 -还原引发体系引发聚合有利于接枝反应的进行 ,在 PB含量相同时 ,采用氧化 -还原引发体系合成的 PB- g- SAN接枝共聚物的接枝率比采用 K2 S2 O8合成的接枝共聚物接枝率高。