高可靠性红外车辆分离器设计与应用

本文给出了一种针对公路自动收费系统的车辆分离检测而设计的,利用红外线发射和接收所形成的光幕,完全消除跟车现象,并能将半挂车、全挂车、单车可靠分离的红外车辆分离器。高可靠性红外车辆分离器的设计很好克服了传统红外车辆分离器环境适应性差、故障率高等缺点。本文还介绍了光幕形成的基本原理,并阐述了硬件关键点及实现方法,给出了系统硬件原理图、软件基本设计思想。

基于精细结构描述及数值试验的断续节理岩体力学参数智能选取

Evaluating the mechanical properties of rock masses is the base of rock engineering design and construction. It has great influence on the safety and cost of rock project. The recognition is inevitable consequence of new engineering activities in rock, including high-rise building, super bridge, complex underground installations, hydraulic project and etc. During the constructions, lots of engineering accidents happened, which bring great damage to people. According to the investigation, many failures are due to choosing improper mechanical properties. ‘Can’t give the proper properties’ becomes one of big problems for theoretic analysis and numerical simulation. Selecting the properties reasonably and effectively is very significant for the planning, design and construction of rock engineering works. A multiple method based on site investigation, theoretic analysis, model test, numerical test and back analysis by artificial neural network is conducted to determine and optimize the mechanical properties for engineering design. The following outcomes are obtained: (1) Mapping of the rock mass structure Detailed geological investigation is the soul of the fine structure description. Based on statistical window，geological sketch and digital photography，a new method for rock mass fine structure in-situ mapping is developed. It has already been taken into practice and received good comments in Baihetan Hydropower Station. (2) Theoretic analysis of rock mass containing intermittent joints The shear strength mechanisms of joint and rock bridge are analyzed respectively. And the multiple modes of failure on different stress condition are summarized and supplied. Then, through introducing deformation compatibility equation in normal direction, the direct shear strength formulation and compression shear strength formulation for coplanar intermittent joints, as well as compression shear strength formulation for ladderlike intermittent joints are deducted respectively. In order to apply the deducted formulation conveniently in the real projects, a relationship between these formulations and Mohr-Coulomb hypothesis is built up. (3) Model test of rock mass containing intermittent joints Model tests are adopted to study the mechanical mechanism of joints to rock masses. The failure modes of rock mass containing intermittent joints are summarized from the model test. Six typical failure modes are found in the test, and brittle failures are the main failure mode. The evolvement processes of shear stress, shear displacement, normal stress and normal displacement are monitored by using rigid servo test machine. And the deformation and failure character during the loading process is analyzed. According to the model test, the failure modes quite depend on the joint distribution, connectivity and stress states. According to the contrastive analysis of complete stress strain curve, different failure developing stages are found in the intact rock, across jointed rock mass and intermittent jointed rock mass. There are four typical stages in the stress strain curve of intact rock, namely shear contraction stage, linear elastic stage, failure stage and residual strength stage. There are three typical stages in the across jointed rock mass, namely linear elastic stage, transition zone and sliding failure stage. Correspondingly, five typical stages are found in the intermittent jointed rock mass, namely linear elastic stage, sliding of joint, steady growth of post-crack, joint coalescence failure, and residual strength. According to strength analysis, the failure envelopes of intact rock and across jointed rock mass are the upper bound and lower bound separately. The strength of intermittent jointed rock mass can be evaluated by reducing the bandwidth of the failure envelope with geo-mechanics analysis. (4) Numerical test of rock mass Two sets of methods, i.e. the distinct element method (DEC) based on in-situ geology mapping and the realistic failure process analysis (RFPA) based on high-definition digital imaging, are developed and introduced. The operation process and analysis results are demonstrated detailedly from the research on parameters of rock mass based on numerical test in the Jinping First Stage Hydropower Station and Baihetan Hydropower Station. By comparison，the advantages and disadvantages are discussed. Then the applicable fields are figured out respectively. (5) Intelligent evaluation based on artificial neural network (ANN) The characters of both ANN and parameter evaluation of rock mass are discussed and summarized. According to the investigations, ANN has a bright application future in the field of parameter evaluation of rock mass. Intelligent evaluation of mechanical parameters in the Jinping First Stage Hydropower Station is taken as an example to demonstrate the analysis process. The problems in five aspects, i. e. sample selection, network design, initial value selection, learning rate and expected error, are discussed detailedly.

陆生蜗牛壳体同位素组成及其对生长季节的响应

Stable isotope compositions of land snail shells have a great potential as an indicator of paleoclimatic and paleoenvironmental changes. However, some key issues, such as the relationship of carbon isotope between snail food and local vegetation, and the uncertainty of the dominant factors about snail body fluid changes in oxygen isotope composition, remain less well known, strongly limiting shell isotopic application. In this study, we measure the stable isotope compositions on the shells of both live snails and fossils collected from the Chinese Loess Plateau and a loess sequence at Mangshan, Xingyang, respectively. Based on the analyses, the association of the stable isotope compositions of land snail shells with their growing seasons is investigated. In addition, the climatic and environmental significances of isotopic differences among several snail species are discussed. The main results and conclusions are presented as follows: 1. δ18O values for the shell lip samples of Bradybaena ravida redfieldi range from -6.79‰ to -1.92‰, and parallels to the monthly changes of local rain water δ18O, temperature and humidity. The compatibility of shell lip δ18O with monthly modeled shell δ18O indicates that the shell lip δ18O changes are mainly resulted from the 18O variations of rain-water. The shells of a land snail growing in spring could be enriched in 18O, and those growing in summer depleted in 18O. 2. Carbon isotope compositions of snail shells are controlled by their diet, which is affected by the relative proportion of C3 to C4. There are some differences in carbon isotopic compositions among different snail species, especially between P. orphana and V. tenera or P. aeoli. Shell δ13C for P. orphana is the most positive with an average of -5.88 ± 2.54 ‰. The C4 plant fraction of the food for “cold-aridiphilous” taxa, P. aeoli and V. tenera, is distinctly lower than that for “thermo-humidiphilous” taxa, P. orphana, indicating that summer is likely to be the main active season of P. orphana and spring of P. aeoli and V. tenera. Therefore, some discrepancy of carbon isotopic compositions among different species may be related to snail active season. 3. δ13C values among different species have a certain degree of positive correlation, which may be influenced by local vegetation ecosystem. δ13C value of the snail shells (especially P. orphana) shows an eastward increasing trend and consists with the variations of C4 plants biomass in Loess Plateau. The result shows that the carbon isotope in local vegetation ecosystem is one of the main factors influencing δ13C values of snail food. Therefore, both carbon isotopes of local vegetation ecosystem and snail active season contribute to the carbon isotopic differences among different snail species and in different areas. 4. δ13C values of living snail shells and soil organic matter have a positive correlation with each other, which further supports the view that carbon isotope in local vegetation ecosystem is one of the main factors influencing δ13C values of snail food. However, the range of δ13C values of snail food for various species in response to carbon isotope in local vegetation ecosystem is different. It is suggested that 13C enrichment of snail shells relative to local vegetation ecosystem has a potential to indicate snail active season and the degree of climate temperature and humidity. 5. There is a significant negative correlation between carbon and oxygen isotopic compositions of living snail shells in Loess Plateau. This result further supports that snail active season can be inferred based on the shell carbon and oxygen isotopic compositions. Moreover, there are some positive correlations between mean annual temperature and differences of shell δ13C values ( 13CV. tenera-P. orphana) and that of δ18O values ( 18OV. tenera-P. orphana) for P. orphana, a typical “thermo-humidiphilous” taxa, and V. tenera, a typical “cold-aridiphilous” taxa, respectively. It shows that  13CV. tenera-P. orphana and  18OV. tenera-P. orphana may have a potential to indicate mean annual temperature or the length of biological growing season. 6. Stable isotopes of land snail shell in the Mangshan loess sequence show that the shell δ18O value of “cold-aridiphilous” taxa V. tenera is more positive than “thermo-humidiphilous” taxa P. orphana and δ13C value of the former is more negative than the latter. In addition, the shell δ18O value of V. tenera varies significantly in different period. During the last glacial maximum, its δ18O value with an average of -7.89 ‰ is more negative than that (-5.88 ‰) from the last deglaciation to the early Holocene. This phenomenon indicates that its growing season during different period is significantly different. It tends to grow in summer in last glacial maximum. With climate warming, it prefers growing in spring with relatively low temperature. While the shell δ18O value of P. orphana varies in a little range, which shows that its activity season is shorter and mainly in summer. These results further support that the change of the snail growing season is one of the main factors of differences of carbon isotopic compositions among different snail species and varies with time. Furthermore, it is consistent that changes in magnetic susceptibility and trend of differences of shell δ18O values and δ13C values respectively between the two snail fossils. It is further testified that 13CV. tenera-P. orphana and  18OV. tenera-P. orphana may have a potential to indicate mean annual temperature or the length of biological growing season.

DAS24-3B数据采集系统控制系统软件的研制与开发

Under the auspices of the 'knowledge-Innovation Program' of CAS, Institute of Geology and Geophysics has established the Broadband Seismic Laboratory. A new kind of 24-bit high-resolution seismograph DAS24-3B has been designed and manufactured in an effort of developing China's own technology of seismic array. Since these instruments will primarily be used in field operation, there is a need to optimize the system software of data acquisition system (DAS) to enhance its stability, compatibility and maintenance. The design ideas of the system software of DAS24-3B are partly learned from the advanced DAS 72A-08. In this system there are two exclusive communication programs DNAPI-COM1 and DNAPI-LPT1, which are suitable for all standard industrial computers with ECP parallel port and serial port. By these exclusive parallel and serial communication interface the system software is split into three parts, acquisition program, user's control program and graphical display program, which can function well in separate units and can run correctly in whole. The three parts of DAS24-3B's system software possess different functions and advantages. The function of acquisition program is to control the process of seismic data acquisition. DAS24-3B system reduced its power and harddisk read-write disturbance by using the extended memory attached to its CPU, which functions as enlarging the data buffer of system and lessening the times of harddisk read-write operations. Since GPS receiver of DAS is strongly sensitive to the around environment and has the possibility of signal loss the acquisition program has been designed with the ability to automatically trail the GPS locked time. The function of user's controlling program is to configure the system's work environment, to inform the user's commands to DAS, to trail the status of DAS in real-time. The function of graphical display program is to illustrate data in figures, to convert data file into some common formatted file, to split data file in parts and combine data files into one. Both user's control program and graphical display program are API (Application Programming Interface) in window 95/98 system. Both possess the features of clearness and friendship by use of all kind of window controls, which are composed by menu, toolbar, statusbar, dialogue box, message box, edit box, scrollbar, time control, button and so on. Two programs of systemic exception handles are provided to treat the trouble in field. The DAS24-3B DAS has been designed to be easier to use-better ability, more stable and simpler. It has been tested in field and base station and has been proved more suitable for field operation of seismic array than other native instruments.

宽频带地震数据采集系统的研制

The seismic data acquisition system is the most important equipment for seismic prospecting. The geophysicists have been paying high attention to the specification of the equipment used in seismic prospecting. Its specification and performance are of great concerned to acquire precisely and accurately seismic data, which show us stratum frame. But, by this time, limited by the technology, most of the Broad-band Seismic Recorder (BSR) for lithosphere research of our country were bought from fremdness which were very costliness and maintained discommodiously. So it is very important to study the seismic data acquisition system.The subject of the thesis is the research of the BSR, several items were included, such as: seismic data digitizer and its condition monitor design.In the first chapter, the author explained the significance of the implement of BSR, expatiated the requirement to the device and introduced the actuality of the BSR in our country.In the second chapter, the collectivity architecture of the BSR system was illustrated. Whereafter, the collectivity target and guideline of the performance of the system design were introduced. The difficulty of the system design and some key technology were analyzed, such as the Electro Magnetic Compatibility (EMC), system reliability technology and so on.In the third chapter, some design details of BSR were introduced. In the recorder, the former analog to digital converter (ADC) was separated from the later data transition module. According to the characteristic of seismic data acquisition system, a set high-resolution 24-bit ADC chip was chosen to the recorder design scheme. As the following part, the noise performance of the seismic data channel was analyzed.In the fourth chapter, the embedded software design of each board and the software design of the workstation were introduced. At the same time the communication protocol of the each module was recommendedAt the last part of this thesis, the advantages and the practicability of the BSR system design were summarized, and the next development items were suggested.

吗啡相关情境线索的形成及效应表达的神经基础——海马与基底外侧杏仁核在其中的作用

Drug-associated cue-induced relapse to drug seeking causes most difficulties of therapy for drug addiction. Addicts are exposed to two forms of environmental stimuli during drug-taking: contextual stimuli (e.g. a house in which the drug is consumed) and discrete stimuli (DS, e.g. a crack pipe or a syringe for drug). These stimuli become contextual cues and discrete cues, respectively. The incentive value of contextual cues plays a great role in opiates relapse. Compared with drug self-administration model, conditioned place preference (CPP) reflects the approach behavior for drug cues, not concerned with acquisition of operant behaviors. The present study aimed to investigate the role of basolateral amygdala (BLA) and hippocampus in the effect of opiates-related contextual cues using CPP model. Establishing DS-dependent or contextual cues-dependent CPP, the effect of BLA or hippocampus inactivation prior to training phase on acquisition of contextual cues-opiates association was evaluated. Inactivation prior to test phase was used to evaluate roles of BLA and hippocampus in expression of contextual cues-dependent morphine CPP. The main results were as follows: Inactivation of BLA or dorsal hippocampus selectively impaired acquisition of contextual cue-dependent CPP, but inactivation of ventral hippocampus had no impact on acquisition of either DS-dependent or contextual cue-dependent morphine CPP. Inactivation of BLA selectively inhibited expression of contextual cue-depended CPP. Inactivation of ventral hippocampus inhibited expression of both DS-dependent and contextual cue-dependent morphine CPP. These results suggest that BLA and dorsal hippocampus contribute to contextual cue association with opiates but not DS-opiates association. BLA and ventral hippocampus play important roles in incentive value of contextual cues. The present study provides more information for the neurological substrates underlying contextual cues associated with opiates.

基于刺激－反应相容性的汉语拼音和弦键盘的实验研究

Stimulus-Response Compatibility is a key concept in human-machine interaction. It is proved that to map stimulus to response according to salient-feature coding principle will get a compatible pair. In the designing of Chinese Pinyin Code inputting devices, stimulus-response compatibility will bring the device with features of ease of use and ease of learning. In this research, Response time and error rates of two designs of salient-feature coding principle and one design of random mapping were tested along with the QWERTY keyboard. Cross-modal Compatibility Effects were found, and no significant difference between two salient-feature coding types, both on response time and error rates; but response time has shown difference between salient-feature coding designs and random mapping design. Compared with the QWERTY keyboard group, the error rates of subjects of chord keyboard group showed no significant differences. But subjects assigned to the QWERTY keyboard group have a shorter response time. One possible reason is the subjects of chord keyboard group only at beginner skill after at most 6 hours practice whereas subjects of QWERTY group were at least at novice level after take a foundation of computer class at their own college.

线索语义相容性的研究

With the studies of the Stimulus-Response Compatibility (SRC), more and more psychologists consider that the compatibility isn't only exist between stimulus and stimulus, response and response, but also any two sets in the information processing, it means that the compatibility is the basic feature of the human information processing. Research on the compatibility of the precue is a powerful evidence to support the issue. Dimension Overlap Model (Kornblum, 1990) is one of the most popular models to explain the mechanism of the SRC which focus on the dimension overlapping between the stimulus and response will activate the compatible response automatically, the compatibility effects origin from whether the compatible response prove or interference the response, the so the time course between the automatic activation and the task processing cause the dynamical time feature of the SRC (Kornblum, 1997). Yet the DO model has gotten many supports, it hasn't been tested in the paradigm of the precue task. At the same time, company with the development of the Environment Psychology, the effect of the ex-information in the environment on the inside information processing has drown much attention, does the validity probability of the cue have any influence on the cue compatibility? How about the relationship of the cue compatibility and the SRC? Research on the questions will reveal the characteristics of the human information processing, enhance the knowledge of the compatibility phenomena and resource, enlarge the field of SRC and produce more practice usage on the design of human-machine system. The mechanism and influence factors of symbolic compatibility between cue and stimulus were investigated within a precueing paradigm. The influence of the dimension overlapping relation between the cue and the stimulus, cue and the response on the reaction time were studied under the different kinds of SRC, to test whether or not it confirms the dimension overlap hypothesis, to test is there any effect of SOA and validity probability of cues on the cue compatibility. The results showed that the cue compatibility exists and owns such features: 1, It confirms the dimension overlap model that the cue which dimension overlapped with the stimulus or the response will influence the efficiency of the processing, the reaction time is shorter when the cue is congruent with the stimulus or the response that that of the incongruent cue; 2, Consistent to the automatic activation hypothesis, the time course is the important characteristic of the cue compatibility. The largest compatibility effect can be gotten from the middle duration of SOA. 3, The validity probability of cues influence the cue compatibility significantly, the strength of the cue compatibility effect grows stronger with the higher validity probability of cues. 4, The cue compatibility affect the effect of SRC, especially when the cue is compatible with the stimulus; 5, The cue compatibility has two-fold meaning, the cue-stimulus compatibility and the cue-response compatibility, the former is stronger than the later when they compete each other. In summary, the compatibility, the basic feature of human information processing, is proved by the research, and the dimension overlap model and automatic activation hypothesis is tested by the studying on the cue compatibility.

保险推销员自我效能感及其工作模型

The research studied self-efficacy and job mechanism of insurance salesmen in China by the methods of in-depth interview, focus-group, semi-open questionnaire, standard questionnaire. There were about 1300 samples surveyed. The way of data analysis such as factor analysis, correlation analysis, regreesion analysis and structure equation was used. Four following conclusions were drawn: First, self-efficacy of inssurance salesmen in China consists of eight factorswhich are interview skills, manner, persistence, control of emotion, plans and comments, master of knowledge, intuition and judgement, preparation. Second, the relationship between self-efficacy and other job variables such as achievement motivation, work incentive, coping strategy, view of ability, performance, goalsetting, colleague relationship, the way of feedback from leader, job satisfaction and exertion were tested and all the correlations were significant. Third, regression analysis was used to test the relationship between self-efficacy and the antecedent variables. The result was that four antecedent varialbes enter equation (p<.05). They are self-oriented achievement motivation, stability of emotion, performance and colleague relationship.. Finally, vertified by path-analysis, the research posits a comprehensive model about job for insurance salesmen, in which self-efficacy was the most important factor. On the one hand, self-efficacy has dominant effects on the consequent variables, such as mastery goal, performance- approach goal, job satisfaction, exertion, coping strategy, on the another hand, self-efficacy was found as mediator of the relationship between the antecedent variables and consequent variables.

上市公司经营管理者绩效－报酬与激励机制初探

This research aims at the CEO's (chief executive officer) incentive-reward system and investigates 456 companies that have come into the market. The structure and level of agent reward are analyzed. And the problem in the incentive-reward mechanism is brought forward. The agent's payments are poor comparing to their contributions. And stock is not a primary incentive. Bonus compensation is still the dominant incentive means. By questionnaire and interview, it was fond that matriel need was rank first among these CEOs'needs. These foundinds indicate that the agents' payment is too poor to work as an effective incentive. The corporation's agent incentive is not enough in fact. The two reasons about this problem lie in our institutions and traditional opinions about commerce. To solve this matter, we must establish a scientific and reasonable evaluation system and incentive-reward system. At the same time, the market system and corporation management mechanism are absolutely need.

Investigation of LSM1.1-ScSZ composite cathodes for anode-supported solid oxide fuel cells

La0.8Sr0.2Mn1.1O3 (LSM1.1)-10 mol% Sc2O3-Stabilized ZrO2 co-doped with CeO2 (ScSZ) composite cathodes were investigated for anode-supported solid oxide fuel cells (SOFCs) with thin 8 mol% Y2O3-stabilized ZrO2 (YSZ) electrolyte. X-ray diffraction (XRD) results indicated that the ScSZ electrolytes displayed good chemical compatibility with the nonstoichiometric LSM1.1 against co-firing at 1300 degrees C. Increasing the CeO2 content in the ScSZ electrolytes dramatically suppressed the electrode polarization resistance, which may be related to the improved surface oxygen exchange or the enlarged active area of cathode. The 5Ce10ScZr was the best electrolyte for the composite cathodes, which caused a small ohmic resistance decrease and the reduced polarization resistance and brought about the highest cell performance. The cell performances at lower temperatures seemed to rely on the electrode polarization resistance more seriously, than the ohmic resistance. Compared with the cell impedance at higher temperatures, the higher the 5Ce10ScZr proportion in the composite cathodes, the smaller the increment of the charge transfer resistance at lower temperatures. The anode-supported SOFC with the LSM1.1-5Ce10ScZr (60:40) composite cathode achieved the maximum power densities of 0.82 W/cm(2) at 650 degrees C and 2.24 W/cm(2) at 800 degrees C, respectively. (c) 2005 Elsevier B.V. All rights reserved.