The structure and electrochemical characteristics of La0.67Mg0.33 (Ni0.8Co0.1Mn0.1)(x) (x=2.5-5.0) multiphase alloys for nickel-metal hydride batteries

This paper presents results concerning structure and electrochemical characteristics of the La0.67Mg0.33 (Ni0.8Co0.1Mn0.1) (x) (x=2.5-5.0) alloy. It can be found from the result of the Rietveld analyses that the structures of the alloys change obviously with increasing x from 2.5 to 5.0. The main phase of the alloys with x=2.5-3.5 is LaMg2Ni9 phase with a PuNi3-type rhombohedral structure, but the main phase of the alloys with x=4.0-5.0 is LaNi(5)phase with a CaCu5-type hexagonal structure. Furthermore, the phase ratio, lattice parameter and cell volume of the LaMg2Ni9 phase and the LaNi5 phase change with increasing x. The electrochemical studies show that the maximum discharge capacity increases from 214.7 mAh/g (x=2.5) to 391.1 mAh/g (x=3.5) and then decreases to 238.5 mAh/g (x=5.0). As the discharge current density is 1,200 mA/g, the high rate dischargeability (HRD) increases from 51.1% (x=2.5) to 83.7% (x=3.5) and then decreases to 71.6% (x=5.0). Moreover, the exchange current density (I-0) of the alloy electrodes first increases and then decrease with increasing x from 2.5 to 5.0, which is consistent with the variation of the HRD. The cell volume reduces with increasing x in the alloys, which is detrimental to hydrogen diffusion and accordingly decreases the low-temperature dischargeability of the alloy electrodes.

Luminescence properties of RP1-xVxO4: A (R=Y, Gd, La; A=Sm3+Er3+ x=0, 0.5, 1) thin films prepared by pechini sol-gel process

Thin film phosphors with compositions of RP1-xVxO4: A (R = Y, Gd, La; A = Sm3+, Et3+; x = 0, 0.5, 1) have been prepared by a Pechini sol-gel process. X-Ray diffraction, atomic force microscopy (AFM), photoluminescence excitation and emission spectra were utilized to characterize the thin film phosphors. The results of XRD showed that a solid solution formed in YVxP1-xO4: A film series from x = 0 to x = 1 with zircon structure, which also held for GdVO4: A film. However, LaVO4: A film crystallized with a different structure, monazite. AFM study revealed that the phosphor films consisted of homogeneous particles ranging from 90 to 400 nm depending on the compositions. Upon short ultraviolet excitation, the films exhibit the characteristic Sm(3+ 4)G(5/2)-H-6(J) (J=5/2, 7/2, 9/2) emission in the red region and Er3+ H-2(11/2), S-4(3/2)-I-4(15/2) emission in the green region, respectively With the increase of x values in YVxP1-xO4: SM3+ (Er3+) films, the emission intensity Of SM3+ (Er3+) increases due to the increase of energy transfer probability from VO43- to Sm3+ (Er3+). Due to the structural effects, the Sm3+ (Er3+) shows similar spectral properties in YVO4 and GdVO4 films, which are much different from those in LaVO4 film.

实时BIA技术对蛋白A与免疫球蛋白G相互作用的研究

应用实时BIA技术 ,探讨了蛋白A与小鼠免疫球蛋白G (MIgG)之间的相互作用 ,求出相互作用的动力学速率常数ka=5 0 7× 1 0 4 (mol/L) - 1 s- 1 ,kd=9 65× 1 0 - 5(s- 1 ) ,结合常数KA=5 2 5× 1 0 8(mol/L) - 1 .同时使用蛋白A固定的传感片用于MIgG浓度的检测 ,在 0 64～ 1 2mg/L浓度区间内 ,MIgG的响应值与其浓度有非常好的线性关系.

反应挤出条件对PP-g-GMA接枝率、接枝效率和熔体流动速率的影响

用反应挤出法在聚丙烯 (PP)分子链上接枝甲基丙烯酸环氧丙酯 (GMA) ,制备功能化聚丙烯 .重点讨论了单体浓度、引发剂浓度、反应温度及物料在螺杆中的停留时间等对接枝产物 PP-g-GMA的接枝率、接枝效率和熔体流动速率的影响 .结果表明 ,PP-g-GMA接枝率与加入的单体浓度成正比 ,与引发剂浓度无关 ,反应挤出的适宜温度窗口在 1 95～ 2 3 0℃之间 ,停留时间超过 1 min后接枝率与停留时间无关 ;PP-g-GMA的熔体流动速率与单体浓度成反比 ,与引发剂的用量成正比 ,在反应温度窗口内与反应挤出温度和物料停留时间关系不大 ;单体和引发剂的浓度、反应挤出温度及物料停留时间对 PP-g-GMA的接枝效率无显著影响 .

Morphologies and physical properties of PA1010/HIPS/HIPS-g-MA ternary blends

The effect of the content of a copolymer consisting of high impact polystyrene grafted with maleic anhydride (HIPS-g-MA) on morphological and mechanical properties of PA1010/HIPS blends has been studied. Blend morphologies were controlled by adding HIPS-g-MA during melt processing, thus the dispersion of the HIPS phase and interfacial adhesion between the domains and matrices in these blends were changed obviously. The weight fractions of HIPS-g-MA in the blends increased from 2.5 to 20, then much finer dispersions of discrete HIPS phase with average domain sizes decreased from 6.1 to 0.1 mu m were obtained. It was found that a compatibilizer, a graft copolymer of HIPS-g-MA and PA1010 was synthesized in situ during the melt mixing of the blends. The mechanical properties of compatibilized blends were obviously better than those of uncompatibilized PA1010/HIPS blends. These behaviors could be attributed to the chemical interactions between the two components of PA1010 and HIPS-g-MA and good dispersion in PA1010/HIPS/HIPS-g-MA blends. Evidence of reactions in the blends was seen in the morphology and mechanical behaviour of the solid. The blend containing 5 wt % HIPS-g-MA component exhibited outstanding toughness. (C) 1999 Kluwer Academic Publishers.

Multi-core structure of the main part of the Kuroshio at G-PN section in the East China Sea

Sectional velocity distribution of the East China Sea Kuroshio is one of the basic points in the study of the Kuroshio. Hydrographic temperature and salinity data at G-PN section in the East China Sea from June 1955 to November 2001 are collected and properly processed to calculate the geostrophic current using dynamic height method at the transect of the Kuroshio. After analysis of calculation results, the basic current structure of the Kuroshio in its main part is examined together with scalar estimate and characters of multi- core structure, and spacial-temporal variations of current cores' position. Main result shows that (1) single-core structure, double-core structure and multi-core structure are basic forms in axial part of the Kuroshio; (2) abvious temporal variations exist in current structure of the Kuroshio; (3) the current of structure of the Kuroshio has distinctly seasonal association. The number of current cores is on the high side of core numbers in average and multi-core stucture appears in fall mostly.

扇贝大防御素和G型溶菌酶的基因克隆与重组表达

扇贝养殖是我国传统的海水养殖产业，但自1997 年以来，养殖扇贝陆续爆发的大规模死亡，不但造成了巨大的经济损失，而且严重影响了该产业的健康发展。扇贝病害的不断爆发以及病因的多样性迫切要求制定新的疾病防治措施和开发新型的抗菌物质。 从扇贝自身的免疫防御因子入手，筛选和克隆参与免疫防御的功能基因，一方面可以研究抗病功能基因在病原感染或环境胁迫条件下的表达规律，深入探讨扇贝的免疫防御机制，并可作为抗病良种选育的分子标记，指导扇贝的遗传改良和抗病品系的培育；另一方面，可对抗菌效应物实现重组表达，开发新型的病害预防治疗制剂，取代目前普遍使用的抗生素和化学药物。抗菌效应物是机体在免疫应答过程中产生的多肽类物质，对侵入生物体内的细菌、病毒具有很强的免疫杀灭作用，对抗菌效应物的研究有助于深入了解机体先天性免疫防御的机制。 本研究采用大规模EST测序方法，结合cDNA末端快速扩增（RACE）技术，从海湾扇贝血淋巴中克隆到了大防御素基因（big defensin, AiBD）的全长cDNA序列，该cDNA全长为531 bp，其中5' 非编码区（UTR）为24 bp，开放阅读框（Open Reading Frame, ORF）含有369 bp，编码122 个氨基酸残基；随后为138-bp 的3' UTR，包括一个多聚腺苷酸信号序列（AATAAA）和ploy A尾巴。分析表明，海湾扇贝大防御素是以前体的形式合成，前体分子包括信号肽、前域和成熟肽三部分。采用Northern blot方法，以DIG标记的DNA探针检测了 AiBD mRNA在不同组织中的表达。结果发现，AiBD 基因的转录本主要在血淋巴中表达，在鳃中也有微量的表达，而在外套膜、闭壳肌、性腺及肝胰腺中检测不到杂交信号。采用QRT-PCR（quantitative real time PCR）对鳗弧菌感染后海湾扇贝血淋巴中AiBD mRNA 的表达量进行了检测，结果发现在感染后8 h 内， AiBD mRNA 的相对表达量平缓升高；随着刺激时间的增长，AiBD基因的mRNA表达量急剧增加，在刺激后16 h 和32 h 分别达到了空白组的72.3 倍和131.1 倍。为了研究海湾扇贝大防御素的抗菌活性，将其成熟肽编码区克隆到毕赤酵母表达载体pPIC9K并实现了重组表达。抑菌实验表明，重组AiBD具有广谱的抗菌活性，其对供试的三株革兰氏阳性菌（藤黄微球菌、溶壁微球菌、金黄色葡萄球菌）都表现出显著的抗菌活性，而对革兰氏阴性菌（鳗弧菌、亮弧菌）的抑菌活性则相对较弱；此外，重组AiBD对表达宿主也表现出杀菌活性，证明其具有抗真菌活性。 根据栉孔扇贝G 型溶菌酶基因的cDNA序列，利用构建的Genome Walking 文库获得了栉孔扇贝G 型溶菌酶基因的全长序列，该基因序列全长为8131 bp，由六个外显子和五个内含子组成。六个外显子长度分别为55 bp，60 bp，90 bp，113 bp，145 bp 和140 bp；五个内含子的长度分别为1126 bp，2161 bp，2744 bp，750 bp和592 bp；内含子的两侧都具有RNA正确剪接所必需的识别位点（GT/AG）。利用TRANSFAC 软件对栉孔扇贝G 型溶菌酶基因的5' 侧翼序列分析发现，该基因的5' 侧翼具有 TATA box 和 CAAT box 的共有序列；此外，在该基因的5' 侧翼发现了C/EBP、NF-κB、OCT-1 和 NF-IL6 等参与免疫基因激活的转录因子潜在结合位点。采用Northern blot方法，以生物素标记的RNA 探针检测了栉孔扇贝G 型溶菌酶基因在不同组织中的表达。结果发现，该基因的转录本主要在鳃、性腺及肝胰腺中表达，在血细胞和外套膜中也有微量的的表达，而在闭壳肌中检测不到杂交信号，这表明栉孔扇贝G 型溶菌酶可能兼备参与机体免疫防御和消化的功能。为了研究栉孔扇贝G 型溶菌酶的抗菌活性，将其成熟肽编码区克隆到毕赤酵母表达载体pPIC9K并实现了重组表达。抑菌实验表明，重组产物具有显著的抗阳性菌活性，其对供试的藤黄微球菌、溶壁微球菌表现出明显的抑制作用，对金黄色葡萄球菌未检测到抑制活性；而对革兰氏阴性菌仅表现出微弱的抑菌活性（亮弧菌和鳗弧菌），对大肠杆菌则基本无抑制活性。

压力和铁含量对铁方镁石(Mg1-xFex)O(x<=0.25)弹性常数影响的第一性原理研究

By first principle methods based on density functional theory (DFT),the equation of state(EOS) and elastic constants of both periclase and ferropericlase are calculated. The pressure and iron doping effects on the elastic constants of ferropericlase are investigated systematically. Firstly, we calculate the elastic constants of periclase and compare the obtained results with experimental data and other theoretical calculations, which shows a encouraging consistence and demonstrates the practicability of first-principle methods. Secondly, by adding iron into periclase crystal model, we build up ferropericlase with iron contents ranging from 0% to 25% mole percent. The corresponding elastic constants are calculated in a large pressure range(0~120GPa). Emphatically, the strong correlation of 3d electrons in transitional elements, such as iron, is difficult to treat in first-principle methods for a long time. The current solution is to make additional correction. During the initial stage of this study, the strong correlation of 3d electrons in iron is not considered, and we observed that addition of iron decreases the volume of ferropericlase, which is totally contradictory to the experimental data. By applying LDA+U approximation in order to solve the strongly correlated 3d electron of iron, we observed the expansion of volume by iron as expected. On the basis of the LDA+U approximation, the elastic constants of ferropericlase are calculated. After a detailed analysis of data obtained from theoretical calculations, we have reached the following conclusions:(1)pressure imposes positive effects on all elastic constants, and the degree of effects is C11>C12>C44. (2) Iron has no distinctive effects on C11 and C12, although some fluctuations are observed around 60GPa. However, iron has obvious softening effects on C44 The softening effects on C44 are intensified as pressure increases. Above the 100GPa, the effects increase greatly, even surpasses the pressure's positive effects in ferropericlase crystal models with iron mole percent of having 12.5%, 18.75% and 25% iron content. (3)As to the modulus deprived from elastic constants, iron has no effect on the adiabatic bulk module BS, only a little fluctuation around 60GPa. We find iron's softening effects on shear modulus G. (4)We find out that, compared with low iron content, elastic constants with iron content approaching 25mole% is consistently fluctuated，which may be caused by the limitations of the LDA+U approximation method itself. (5)We investigate the pressure and Fe doping effects on elastic anisotropy factor（A=(2C44+C12-C11)/C11） of ferropericlase and find out that iron contents will lower the critical isotropic pressure. At the same pressure, when the pressure is below the isotropic pressure, iron softens the anisotropy factor ; when pressure surpasses the isotropic pressure, iron increases the anisotropy factor.