川西青杨组(Section Tacamahaca Spach)不同种的亲缘关系分析

青杨组（Section Tacamahaca Spach）杨树是我国重要的乡土经济树种，目前对其分子遗传变异和系统进化的研究还很少，尤其是在青杨组杨树遗传资源极为丰富的川西地区，杨树的分子进化及亲缘关系的研究极为缺乏，非常不利于该树种遗传资源的开发和利用。本研究从川西地区收集了青杨（Populus cathayana）、青海杨（P. prezewalskii）、滇杨（P. yunnanensis）、康定杨（P. kangdingensis）、西南杨（P. schneideri）、小叶杨（P.simonii）和三脉青杨（P. trinervis）这7 个青杨组树种的10 个群体，利用多种分子标记手段对其种间的亲缘关系进行比较，并结合形态和地史资料进行了全面的研究和评价，得到了如下的主要研究结果： 1. SSR 和ISSR 位点变异丰富。通过10 对引物对50 个杨树个体的DNA 样品进行了SSR 分析，所有位点展现了丰富的群体间和种间的多态性，多态位点率达到了100%，每位点的等位基因数变化范围为5 ~ 17，平均为11.9 个；通过11 条ISSR 随机引物对供试的混合DNA 样品进行分析，共检测到130 个标记，其中多态性标记为119 个，多态百分率为91.5%。研究认为，SSR 单个标记能展现高水平信息，而ISSR 单个引物能探测更多数量多态性。通过两个标记的遗传距离、聚类图和PCA 分析，表明：同一种内不同群体间的同源性最高；康定杨和西南杨有较近的亲缘关系；小叶杨和三脉青杨聚合在一起，显示了其相互较近的亲缘关系；滇杨与其它杨树种可能存在着较远的亲缘关系。 2. 采用4 对选择性引物对7 个青杨组杨树种10 个群体进行AFLP 分析，总共扩增出284 个位点，其中200 个位点显示出了多态性，多态位点百分比为70.4%，平均多态带为50 条。TE-AFLP 的分析总共扩增出192 个位点，其中139 个位点显示出了多态性，多态位点百分比为72.4%，平均多态带为34.7 条。比较的结果表明AFLP、TE-AFLP 的遗传信息含量比较接近，略小于ISSR，大约仅为SSR 的1/3；但这两个基于AFLP 的标记系统的信息探察能力也远大于ISSR 和SSR 标记系统。这两个分子标记的聚类结果，显示小叶杨、三脉青杨和滇杨三个种聚为一组，其中小叶杨与三脉青杨的亲缘关系更近；其它几个杨树种聚为一类，西南杨与青杨表现出较近的亲缘关系。 3. 所有7 对cpSSR 引物中，仅有4 个叶绿体位点在种间具有多态性，而在种内群体中并不具有多态性，共检测出13 个条带，组合成了4 种不同的单倍型；对于cpDNA的5 对引物，共检测出了73 条酶切片段，其中52 条是多态带，组合成了9 种不同的单倍型；而5 对mtDNA 通用引物未能检测出多态性的条带，表现出线粒体的保守性。叶绿体的聚类分析认为，小叶杨、三脉青杨和滇杨有较近的母性起源，且依次聚合；其余四种杨树聚为一类，并且康定杨与西南杨表现出最近的亲缘关系，并依次与青杨和青海杨聚合。 4. 根据本文的分子数据，结合形态和生境分布资料分析认为：青杨组杨树种内群体间的遗传变异程度是小于种间的遗传差异，显示了与传统分类一致的结果；三脉青杨和小叶杨有很近的亲缘关系，可能拥有相同的祖先类群；滇杨与小叶杨和三脉青杨之间具有一定的亲缘关系，特别是在其母性祖先的起源上有着一定的同源性；西南杨与青杨和康定杨均保持着较近的亲缘关系，且有可能是这两个种原始祖先杂交后所形成的。 Although western Sichuan is regarded as a natural distribution and variation center forthe Section Tacahamaca of the Populus species in China, little is currently known about themajority of poplar species occurring in this region. In the present study, molecular data wereutilized to determine the genetic relationships among Populus species in Section Tacamahacain western Sichuan including P. cathayana, P. prezewalskii, P. yunnanensis, P. kangdingensis,P. schneideri, P. simonii and P.trinervis. The results are as fellows: 1. The genetic variation at SSR and ISSR loci was abundant. All the 10 SSR loci werepolymorphic, and the number of alleles per locus varied from 5 to 17 with a mean valueequaling 11.9. Based on the 11 ISSR primers, 130 clear and reproducible DNA fragmentswere generated, of which 119 (91.5%) were polymorphic. Our results reveal that single SSRlocus can present more genetic information, while more polymorphic bands can be detectedby single ISSR primer. Moreover, the genetic distance, cluster and PCA analysisdemonstrated that: a close relationship among accessions of the same species and suggestedmonophyly in P. przewalskii and P. cathayana; P. schneideri is genetically highly similar to P.kangdingensis; P. trinervis and P. simonii have a close genetic affinity; P. yunnanensis isdistinct from the other species. 2. Genetic relationships of poplar species in Section Tacamahaca from western Sichuanwere evaluated by means of AFLP and TE-AFLP. For four AFLP primer combinations, atotal of 284 bands were obtained of which 200 (70.4%) were polymorphic with the average of50 polymorphic bands. For four TE-AFLP primer combinations, a total of 192 band wereobtained of which 139 (72.4%) were polymorphic with the average of 34.7 polymorphicbands. Our results indicate that the genetic information of AFLP is similar to that ofTE-AFLP, and little less than that of ISSR, but only about 1/3 of that of SSR. However, theability of information detection of the two AFLP-based markers is much higher than that ofISSR and SSR. In addition, the cluster analysis of AFLP, TE-AFLP and combined data revealthat: P. yunnanensis, P. trinervis and P. simonii clustered together, and P. trinervis and P.simonii showed more closed affinity; the other four poplar species clustered together, P.cathayana and P. schneideri showed more closed origin especially. 3. The cpSSR analysis for seven Populus species belonging to the Section Tacamahaca.Four out of the seven analyzed chloroplast loci were polymorphic, whereas none of the lociwere polymorphic across the accessions within a species. 13 bands and 4 different kinds ofhaplotypes were reduced. Based on 5 pairs of cpDNA primers, 73 fragments (52 polymorphic)and 9 kinds of haplotypes were produced. However, none of the polymorphic was detected bythe 5 mtDNA primer pairs, revealing conservation of mtDNA region. The cluster analysis ofcpDNA revealed that: similar maternal phylogeny among P. yunnanensis, P. trinervis and P.simonii; the other four species clustered together, P. schneideri and P. kangdingensis showedmore closed maternal lineage especially. 4. Our molecular data, morphological characters and nature habitat revealed that: sameto the traditional taxonomy assignment, genetic variation within a same Populus species islower than that among Populus species in Section Tacamahaca; P. yunnanensis may share itschloroplast ancestor with P. trinervis and P. simonii; moreover, sister genetic relationship of P.trinervis and P. simonii indicated their similar origin; P. schneideri clustered with P.kangdingensis and P. cathayana, respectively, and may have derived from an ancienthybridization event involving the ancestors of the two species.

棘蛙族(Tribe Paini)精子形态结构及精巢年周期研究

棘蛙族(Tribe Paini)隶两栖纲(Amphibia)、无尾目(Anura)、蛙科(Ranidae)、叉舌蛙亚科(Dicroglossinae)，由棘蛙属(Paa)、倭蛙属(Nanorana) 和沙巴蛙属(Chaparana)构成（Dubois,1992）。由于特殊的形态特征和染色体核型，棘蛙族受到国内外学者的广泛重视和研究，但是到目前为止，棘蛙族的系统发育关系尚未明晰，族下属种的分类和归属问题还有待进一步研究和新的证据出现。本文通过光学显微镜、电子显微镜和石蜡切片对棘蛙族10 物种的精子和精巢进行研究，旨在了解棘蛙族精子的形态、量度、超微结构特征及不同季节精巢结构的变化规律，同时为棘蛙族的系统研究提供新的依据，也为棘蛙族濒危物种的保护和经济物种的繁殖提供基础资料。研究结果表明：棘蛙族各属物种精子的形态基本相似，精子整体呈线形，由头部、中片和尾部构成。精子头部呈长条状，顶体呈锥状，位于头部顶端并向前伸出，中片较长，尾部波动弯曲。棘蛙族各属物种精子量度差异较大，将各属物种精子头部、中片、尾部、头宽、尾宽的量度数据进行聚类分析，结果表明棘蛙族10 物种可分为三类：第一类包括棘侧蛙、合江棘蛙、小棘蛙、棘腹蛙和棘胸蛙，特点是精子较短，全长在72.6～103.35µm 之间；第二类包括倭蛙、高山倭蛙、腹斑倭蛙，特点是精子较长，全长在107.74～129.75µm 之间；第三类包括隆肛蛙和双团棘胸蛙，特点是精子最长，全长在145.89～165.84µm 之间。棘蛙族各属精子超微结构基本相似：精子头部由顶体、细胞核构成；中片由中心粒、线粒体构成；尾部由单根轴丝构成。精子顶体横切呈圆环状，细胞核电子密度高；线粒体为卵圆形，呈环状围绕轴丝排列，线粒体数目较多，约30层；尾部轴丝为典型的9＋2结构，即由2根中央微管和9对外周微管组成。不同季节的倭蛙精巢结构变化表明倭蛙精巢每年只有一个生精周期，生精周期始于7 月，繁殖季节从5 月到6 月，生精高峰期为9 月；根据倭蛙不同季节精巢结构的变化，可将生精周期分为3 个阶段：第一阶段从7 月到9 月，为精子形成期；第二阶段从10 月到翌年4 月，为精子的贮存阶段，也即倭蛙的冬眠期；第三阶段从5 月到6 月，为精子的排放阶段，即倭蛙的繁殖期。不同季节的隆肛蛙精巢结构变化表明5 月为隆肛蛙的繁殖高峰期。根据棘蛙族各属精子的形态、量度和超微结构特征，结合已有的棘蛙族形态学、生态学、染色体核型及系统学研究成果，本文认为：1．基于精子数据对棘蛙族的划分和基于形态学及分子系统学数据对棘蛙族的划分均有相同之处，精子形态结构可为棘蛙族的系统研究提供新的证据。2． 棘蛙族各属精子的形态、量度及超微结构不仅与蛙科其他属种有明显差异，而且在无尾类中也较为特殊，精子学研究结果支持将棘蛙族从蛙科中分离出来，归隶于叉舌蛙科的叉舌蛙亚科的系统学修正。3. 精子的顶体、细胞核、中片的形态结构及量度可作为蛙科的分类指标。On the base of unique morphological and kyrotype characters, Dubois(1992)recognized three genera Paa, Narnorana, Chaparana as tribe Paini, which is amember of Dicroglossinae, Ranidae. In present study, the sperm shape, size andultrastructure of 10 paini species were investigated through the light and electronmicroscope, and testis structure of N. pleskei and F. quadrana was also studied. Wesuppose this study could offer some spermatological evidence to phylogeny andreproduction study of tribe Paini. The results were as follows:The sperm shape of tribe paini is homologically similar, the spermatozoa arefiliform, composed of elongate head, long mid-piece and waved tail. The acrosome isapically associated with the nucleus and extend anteriorly.The sperm length of tribe paini differ remarkably among genera. Cluster for thelength of sperm head, mid-piece, tail, total length, head-width, tail-width of ten painifrogs indicated the 10 species could be separated into three groups: GroupⅠcontainsP. shini, P. robertingeri, P. spinosa, P. exilispinosa, P. boulengeri, the spermatozoa ischaracterized with short in total length, ranging from 72.6µm to 103.35µm; GroupⅡcontains N. pleskei, N. parkeri, N. ventripunctata, the spermatozoa ischaracterized with relatively long in total length, ranging from 107.74µm to129.75µm; Group Ⅲ contains F. quadrana and P. yunnanensis, the spermatozoa is characterized with longest in total length, ranging from 145.89µm to 165.84µm. thethree groups based on spermatological data is partially match the classification basedon morphological and molecular data.The ultrastructure of spermatozoa in tribe paini is also basic similar, includingacrosome vescile, nuleus of the head proper, centriole, mitochondriol of themid-pieces, axoneme of the tail. The acrosome vescle is circle in TEM transversesection, the density of nucleus is high; The mitochondrions is oval, surrounding theaxial filament with about 30 layers of mitochondria; The axoneme has the typical 9+2pattern of microtubules.The seasonal changes in testis of N. pleskei indicates it has only onespermatogenesis circle, which begin in July, the reproduction season is from May toJune, the spermatogenesis is active in September. On the base of seasonal changes intestis, the spermatogenesis circle can be separated into three stages: In stageⅠfromJuly to September, spermatids are formed; In stage Ⅱ from October to April next year,the spermatozoa are stored in testis,which is the hibernated period; In stage Ⅲ fromMay to June, mature spermatozoa were released from the testis, which is thereproduction season of N. pleskei. As to F. quadrana, reproduction is active in May.With the previous study of morphology, ecology, karyotypes and phylogenyresearch of tribe Paini, the spermatological data in present study suggests:1. The spermatological classification of tribe paini is partially consistant with themorphological and molecular classification respectively.2.The sperm morphology and ultrustructure of tribe paini is unique not only inthe family Ranida but also in Anura, which suggest the tribe paini is monophyletic andmight be transfered from the family Ranida to the family Dicroglossidae based onmolecular evidence.3. The acrosome, nuleus, shape, length and ultrastructure of mid-piece can beused as an alternative taxonomic character in Anura.

Theoretical study of p-d hybridization in Co perovskite

The real-space recursion method and unrestricted Hartree-Fock approximation have been applied to calculate the density of states of various Co perovskite, CeCoO3, SrCoO3 and Sr1-xCexCoO3. We have studied the magnetically ordered states of these Co perovskites in an enlarged double cell, and find its various magnetic structures due to the occupancy of 3d band and its interaction with neighboring Co ions. In this study, we have studied the p-d hybridization of the three Co perovskites, we find t(2g) electrons are localized and the flat e(g) band is responsible for the itinerant behavior, and although the rare earth elements itself contribute little to the DOS at the Fermi energy, the DOS at Fermi energy and the magnetic moment changed consequently because of different valence of Co ions in these compounds and p-d hybridization effect is very important. (C) 2009 Elsevier B.V. All rights reserved.

alpha-decay half-lives of superheavy nuclei and general predictions

The generalized liquid drop model (GLDM) and the cluster model have been employed to calculate the alpha-decay half-lives of superheavy nuclei (SHN) using the experimental alpha-decay Q values. The results of the cluster model are slightly poorer than those from the GLDM if experimental Q values are used. The prediction powers of these two models with theoretical Q values from Audi et al. (Q(Audi)) and Muntian et al. (Q(M)) have been tested to find that the cluster model with Q(Audi) and Q(M) could provide reliable results for Z > 112 but the GLDM with Q(Audi) for Z <= 112. The half-lives of some still unknown nuclei are predicted by these two models and these results may be useful for future experimental assignment and identification.

Optimization of the HIRFL-CSR cluster target

A new gas delivery system is designed and installed for HIRFL-CSR cluster target. The original blocked nozzle is replaced by a new one with the throat diameter of 0.12mm. New test of hydrogen and argon gases are performed. The stable jets can be obtained for these two operation gases. The attenuation of the jet caused by the collision with residual gas is studied. The maximum achievable H-2 target density is 1.75x10(13) atoms/cm(3) with a target thickness of 6.3x10(12) atoms/cm(2) for HIRFL-CSR cluster target. The running stability of the cluster source is tested both for hydrogen and argon. The operation parameters for obtaining hydrogen jet are optimized. The results of long time running for H-2 and Ar cluster jets look promising. The jet intensity has no essential change during the test for H-2 and Ar.

Anomaly in the charge radii and nuclear structure

The axially deformed relativistic mean field theory is applied to study the isotope shift of charge distributions of odd-Z Pr isotope chain. The nuclear structure associated with the shell and the isotope effect is investigated. The mechanism of link in the isotope shift at the neutron magic number N = 82 is revealed to be dependent on the neutron energy level structure at the Fermi energy, demonstrating that the spin-orbit coupling interaction and p-n attraction are well described by the relativistic mean field theory.

Enhancement on the hydrothermal stability of ZSM-5 zeolites by the cooperation effect of exchanged lanthanum and phosphoric species

It was explored by density functional calculations that exchanged La or P species exert great influence on the local Al sites as well as on the adjacent exchanged species. In partially exchanged La- or P/H-ZSM-5 zeolite, some of the Al sites will fall off from the zeolite framework even more easily than in H-form ZSM-5, consistent with our XRF experiments. However, when exchanged by both La and P species, Al at either of the two exchanged sites shows better stability compared to H-from. zeolite. La and P species will interact strongly with each other, as evidenced by the charge donation process and the shortening of P-O-1 bond length. It was just the cooperation of La and P species that enabled RSCC catalysts worked normally under severe conditions. (C) 2004 Elsevier B.V. All rights reserved.

Structure and acidity of Mo/H-MCM-22 catalysts studied by NMR spectroscopy

A comprehensive study on physical and chemical properties of Mo/MCM-22 bifunctional catalysts has been made by using combined analytic and spectroscopic techniques, such as adsorption, elemental analysis, and Xe-129 and P-31 NMR of adsorbed trialkylphosphine oxide probe molecules. Samples prepared by the impregnation method with Mo loadings ranging from 2-10 wt.% have been examined and the results are compared with that obtained from samples prepared by mechanical mixing using MoO3 or Mo2C as agents. Sample calcination treatment is essential in achieving a well-dispersed metal species in Mo/MCM-22. It was found that, upon initial incorporation, the Mo species tend to inactivate both Bronsted and Lewis sites locate predominantly in the supercages rather than the 10-membered ring channels of MCM-22. However, as the Mo loading exceeds 6 wt.%, the excessive Mo species tend to migrate toward extracrystalline surfaces of the catalyst. A consistent decrease in concentrations of acid sites with increasing Mo loading < 6 wt.% was found, especially for those with higher acid strengths. Upon loading of Mo > 6 wt.%, further decreases in both Bronsted and Lewis acidities were observed. These results provide crucial supports for interpreting the peculiar behaviors previously observed during the conversion of methane to benzene over Mo/MCM-22 catalyst under non-oxidative conditions, in which an optimal performance was achieved with a Mo loading of 6 wt.%. The effects of Mo incorporation on porosity and acidity features of the catalyst are discussed. (C) 2004 Published by Elsevier B.V.

Crystallization and Si incorporation mechanisms of SAPO-34

In this study of the synthesis of SAPO-34 molecular sieves, XRD, SEM, XRF, IR and NMR techniques were applied to monitor the crystalloid, structure and composition changes of the samples in the whole crystallization process in order to get evidence for the crystallization as well as Si incorporation mechanism of SATO-34. XRD results revealed that the crystallization contained two stages. In the first 2.5 h (the earlier stage), high up to similar to80% of relative crystallinity could be achieved and the crystal size of SAPO-34 was almost the same as that of any longer time, indicating a fast crystallization feature of the synthesis. In this stage, IR revealed that the formation of SAPO-34 framework structure was accompanied by the diminution of hydroxyls, suggesting that crystal nuclei of SAPO-34 may arise from the structure rearrangement of the initial gel and the condensation of the hydroxyls. NMR results reveal that the template and the ageing period are crucial for the later crystallization of SAPO-34. Preliminary structure units similar to the framework of SAPO-34 have already formed before the crystallization began (0 h and low temperature). Evidence from IR, NMR, and XRF shows that the formation of the SAPO-34 may be a type of gel conversion mechanism, the solution support and the appropriate solution circumstance are two important parameters of the crystallization of SAPO-34. Meanwhile, NMR measurements demonstrated that about 80% of total Si atoms directly take part in the formation of the crystal nuclei as well as in the growth of the crystal grains in the earlier stage (<2.5 h). Evidence tends to support that Si incorporation is by direct participation mechanism rather than by the Si substitution mechanism for P in this stage (<2.5 h). In the later stage (>2.5 h), the relative content of Si increased slightly with a little decrease of Al and P. The increase of Si(4Al) and the appearance of the Si(3Al), Si(2Al), Si(1Al) and Si(OAl) in this stage suggest that substitution of the Si atoms for the phosphorus and for the phosphorus and aluminum pair takes place in the crystallization. The relationship among structure, acidity and crystallization process is established, which suggests a possibility to improve the acidity and catalytic properties by choosing a optimum crystallization time, thus controlling the number and distribution of Si in the framework of SAPO-34. (C) 2002 Elsevier Science Inc. All rights reserved.

A mathematical model of crevice and pitting corrosion—I. The physical model

A predictive and self-consistent mathematical model incorporating the electrochemical, chemical and ionic migration processes characterizing the propagation stage of crevice and pitting corrosion in metals is described. The model predicts the steady-state solution chemistry and electrode kinetics (and hence metal penetration rates) within an active corrosion cavity as a function of the many parameters on which these depend, such as external electrode potential and crevice dimensions. The crevice is modelled as a parallel-sided slot filled with a dilute sodium chloride solution. The cavity propagation rates are found to be faster in the case of a crevice with passive walls than one with active walls. The distribution of current over the internal surface of a crevice with corroding walls can be assessed using this model, giving an indication of the future shape of the cavity. The model is extended to include a solid hydroxide precipitation reaction and considers the effect of consequent changes in the chemical and physical environment within the crevice on the predicted corrosion rates. In this paper, the model is applied to crevice and pitting corrosion in carbon steel.

Effects of soil type on leaching and runoff transport of rare earth elements and phosphorous in laboratory experiments

Through leaching experiments and simulated rainfall experiments, characteristics of vertical leaching of exogenous rare earth elements (REEs) and phosphorus (P) and their losses with surface runoff during simulated rainfall in different types of soils (terra nera soil, cinnamon soil, red soil, loess soil, and purple soil) were investigated. Results of the leaching experiments showed that vertical transports of REEs and P were relatively low, with transport depths less than 6 cm. The vertical leaching rates of REEs and P in the different soils followed the order of purple soil > terra nera soil > red soil > cinnamon soil > loess soil. Results of the simulated rainfall experiments (83 mm h(-1)) revealed that more than 92% of REEs and P transported with soil particles in runoff. The loss rates of REEs and P in surface runoff in the different soil types were in the order of loess soil > terra nera soil > cinnamon soil > red soil > purple soil. The total amounts of losses of REEs and P in runoff were significantly correlated.

Interactions Between Exogenous Rare Earth Elements and Phosphorus Leaching in Packed Soil Columns

Through leaching experiments and simulated rainfall experiments, characteristics of vertical leaching of exogenous rare earth elements (REEs) and phosphorus (P) and their losses with surface runoff during simulated rainfall in different types of soils (terra nera soil, cinnamon soil, red soil, loess soil, and purple soil) were investigated. Results of the leaching experiments showed that vertical transports of REEs and P were relatively low, with transport depths less than 6 cm. The vertical leaching rates of REEs and P in the different soils followed the order of purple soil > terra nera soil > red soil > cinnamon soil > loess soil. Results of the simulated rainfall experiments (83 mm h(-1)) revealed that more than 92% of REEs and P transported with soil particles in runoff. The loss rates of REEs and P in surface runoff in the different soil types were in the order of loess soil > terra nera soil > cinnamon soil > red soil > purple soil. The total amounts of losses of REEs and P in runoff were significantly correlated.

Weak Epitaxy Growth of Copper Hexadecafluorophthalocyanine (F16CuPc) on p-Sexiphenyl Monolayer Film

Weak epitaxy growth (WEG) behavior and mechanism of copper hexadecafluorophthalocyanine (F16CuPc) on p-sexiphenyl (p-6P) monolayer film were investigated by atomic force microscopy (AFM), selected area electron diffraction (SEAD), and wide-angle X-ray diffraction (WAXD). High-quality F16CuPc films with high order, large size, and molecular-level smoothness were obtained successfully by WEG method. It was identified that there exists incommensurate epitaxial relation between highly oriented F16CuPc and p-6P films. The geometrical channels of p-6P monolayer surface induce the nucleation and growth of F16CuPc molecules.

Dispersions of carbon nanotubes in sulfonated poly[bis(benzimidazobenzisoquinolinones)] and their proton-conducting composite membranes

A sulfonated poly[bis(benzimidazobenzisoquinolinones)] (SPBIBI) possessing a conjugated pyridinone ring was shown to be effective for dispersing multiwalled carbon nanotubes (MWCNTs) in DMSO. The dispersions in which the SPBIBI to MWCNTs mass ratio was 4:1 demonstrated the highest MWCNTs concentrations, i.e., 1.5-2.0 mg mL(-1), and were found to be stable for more than six months at room temperature. Through casting of these dispersions, MWCNTs/SPBIBI composite membranes were successfully fabricated on substrates as proton exchange membranes for fuel cell applications and showed no signs of macroscopic aggregation. The properties of composite membranes were investigated, and it was found that the homogeneous dispersion of the MWCNTs in the SPBIBI matrix altered the morphology structures of the composite membranes, which lead to the formation of more regular and smaller cluster-like ion domains.

Synthesis and properties of novel sulfonated poly(phenylquinoxaline)s as proton exchange membranes

Two series of sulfonated poly(phenylquinoxaline)s (SPPQ-x and SPPQ(O)-x, x refers to molar percentage of sulfonated tetraamine monomer) were first synthesized from a sulfonated tetraamine (4,4'-bis(3,4-diaminophenoxy)biphenyl-3.3'-disulfonic acid) and two aromatic bisbenzils (4-phenylglyoxalylbenzil and p,p'-oxydibenzil) in a mild condition. The structures of SPPQ-x and SPPQ(0)-x were characterized by IR and H-1 NMR spectra. The properties of these polymer films, such as water uptake, water swelling ratio, proton conductivity, thermal properties, methanol permeability, hydrolytic and oxidative stability were also investigated. The resulting polymers generally showed good solubility in DMAc and DMSO. Flexible and tough membranes with high mechanical strength were prepared. They show very high thermal, thermooxidative, hydrolytic stabilities and low methanol permeability. SPPQ-100 with the IEC value (2.41 mmol/g) displays the conductivity of 0.1 S/cm and a swelling ratio of 7.3% at 100 degrees C.