STUDY OF THE ELECTROCATALYTIC REDUCTION OF NITRITE WITH SILICOTUNGSTIC HETEROPOLYANION

Three couples of reversible redox waves of the SiW12O404- anion which are composed of two one-electron and one two-electron processes occur in the potential range +0.1 to -0.7 V in aqueous solutions. The first (most positive) and third (most negative) redox waves exhibit good electrocatalytic activities for nitrite reduction in acid solutions with pH < 2 for the former and with pH similar or equal to 4 for the latter. The behavior of the third catalytic wave, which is quite unusual, was studied in detail. The rate constant governing the reduction of NO2- by the first wave of SiW12O404- was measured by an ultramicrodisk electrode as 3.73 x 10(3) M(-1) s(-1).

SYNTHESIS AND CRYSTAL-STRUCTURE OF [ME4C2CP2SMCL-CENTER-DOT-THF]2

Me4C2(C5H4MgCl)2(THF) (THF = tetrahydrofuran) reacts with anhydrous SmCl3 in THF to give [Me4C2CP2SMCl.THF]2. The molecule is a dimer. Sm1 and Sm2 are bridged unsymmetrically by two chlorine atoms [Sm(1)-CI(1) 2.787(2), Sm(1)-Cl(2) 2.848(2), Sm(2)-Cl(1) 2

基于广义正交多项式迭积微分算子的地震波场数值模拟研究

Seismic Numerical Modeling is one of bases of the Exploratory Seismology and Academic Seismology, also is a research field in great demand. Essence of seismic numerical modeling is to assume that structure and parameters of the underground media model are known, simulate the wave-field and calculate the numerical seismic record that should be observed. Seismic numerical modeling is not only a means to know the seismic wave-field in complex inhomogeneous media, but also a test to the application effect by all kinds of methods. There are many seismic numerical modeling methods, each method has its own merits and drawbacks. During the forward modeling, the computation precision and the efficiency are two pivotal questions to evaluate the validity and superiority of the method. The target of my dissertation is to find a new method to possibly improve the computation precision and efficiency, and apply the new forward method to modeling the wave-field in the complex inhomogeneous media. Convolutional Forsyte polynomial differentiator (CFPD) approach developed in this dissertation is robust and efficient, it shares some of the advantages of the high precision of generalized orthogonal polynomial and the high speed of the short operator finite-difference. By adjusting the operator length and optimizing the operator coefficient, the method can involve whole and local information of the wave-field. One of main tasks of the dissertation is to develop a creative, generalized and high precision method. The author introduce convolutional Forsyte polynomial differentiator to calculate the spatial derivative of seismic wave equation, and apply the time staggered grid finite-difference which can better meet the high precision of the convolutional differentiator to substitute the conventional finite-difference to calculate the time derivative of seismic wave equation, then creating a new forward method to modeling the wave-field in complex inhomogeneous media. Comparing with Fourier pseudo-spectral method, Chebyshev pseudo-spectral method, staggered- grid finite difference method and finite element method, convolutional Forsyte polynomial differentiator (CFPD) method has many advantages: 1. Comparing with Fourier pseudo-spectral method. Fourier pseudo-spectral method (FPS) is a local operator, its results have Gibbs effects when the media parameters change, then arose great errors. Therefore, Fourier pseudo-spectral method can not deal with special complex and random heterogeneous media. But convolutional Forsyte polynomial differentiator method can cover global and local information. So for complex inhomogeneous media, CFPD is more efficient. 2. Comparing with staggered-grid high-order finite-difference method, CFPD takes less dots than FD at single wave length, and the number does not increase with the widening of the studying area. 3. Comparing with Chebyshev pseudo-spectral method (CPS). The calculation region of Chebyshev pseudo-spectral method is fixed in , under the condition of unchangeable precision, the augmentation of calculation is unacceptable. Thus Chebyshev pseudo-spectral method is inapplicable to large area. CFPD method is more applicable to large area. 4. Comparing with finite element method (FE), CFPD can use lager grids. The other task of this dissertation is to study 2.5 dimension (2.5D) seismic wave-field. The author reviews the development and present situation of 2.5D problem, expatiates the essentiality of studying the 2.5D problem, apply CFPD method to simulate the seismic wave-field in 2.5D inhomogeneous media. The results indicate that 2.5D numerical modeling is efficient to simulate one of the sections of 3D media, 2.5D calculation is much less time-consuming than 3D calculation, and the wave dispersion of 2.5D modeling is obviously less than that of 3D modeling. Question on applying time staggered-grid convolutional differentiator based on CFPD to modeling 2.5D complex inhomogeneous media was not studied by any geophysicists before, it is a fire-new creation absolutely. The theory and practices prove that the new method can efficiently model the seismic wave-field in complex media. Proposing and developing this new method can provide more choices to study the seismic wave-field modeling, seismic wave migration, seismic inversion, and seismic wave imaging.

基于随机介质理论的多尺度储层非均质性定量描述

Application of long-term exploration for oil and gas shows that the reservoir technology of prediction is one of the most valuable methods. Quantitative analysis of reservoir complexity is also a key technology of reservoir prediction. The current reservoir technologies of prediction are based on the linear assumption of various physical relationships. Therefore, these technologies cannot handle complex reservoirs with thin sands, high heterogeneities in lithological composition and strong varieties in petrophysical properties. Based on the above-mentioned complex reservoir, this paper conducts a series of researches. Both the comprehending and the quantitative analysis of reservoir heterogeneities have been implemented using statistical and non-linear theories of geophysics. At the beginning, the research of random media theories about reservoir heterogeneities was researched in this thesis. One-dimensional (1-D) and two-dimensional (2-D) random medium models were constructed. The autocorrelation lengths of random medium described the mean scale of heterogeneous anomaly in horizontal and deep directions, respectively. The characteristic of random medium models were analyzed. We also studied the corresponding relationship between the reservoir heterogeneities and autocorrelation lengths. Because heterogeneity of reservoir has fractal nature, we described heterogeneity of reservoir by fractal theory based on analyzing of the one-dimensional (1-D) and two-dimensional (2-D) random medium models. We simulated two-dimensional (2-D) random fluctuation medium in different parameters. From the simulated results, we can know that the main features of the two-dimensional (2-D) random medium mode. With autocorrelation lengths becoming larger, scales of heterogeneous geologic bodies in models became bigger. In addition, with the autocorrelation lengths becoming very larger, the layer characteristic of the models is very obvious. It would be difficult to identify sandstone such as gritstone, clay, dense sandstone and gas sandstone and so on in the reservoir with traditional impedance inversion. According to the obvious difference between different lithologic and petrophysical impedance, we studied multi-scale reservoir heterogeneities and developed new technologies. The distribution features of reservoir lithological and petrophysical heterogeneities along vertical and transverse directions were described quantitatively using multi-scale power spectrum and heterogeneity spectrum methods in this paper. Power spectrum (P spectrum) describes the manner of the vertical distribution of reservoir lithologic and petrophysical parameters and the large-scale and small-scale heterogeneities along vertical direction. Heterogeneity spectrum (H spectrum) describes the structure of the reservoir lithologic and petrophysical parameters mainly, that is to say, proportional composition of each lithological and petrophysical heterogeneities are calculated in this formation. The method is more reasonable to describe the degree of transverse multi-scale heterogeneities in reservoir lithological and petrophysical parameters. Using information of sonic logs in Sulige oil field, two spectral methods have been applied to the oil field, and good analytic results have been obtained. In order to contrast the former researches, the last part is the multi-scale character analysis of reservoir based on the transmission character of wave using the wavelet transform. We discussed the method applied to demarcate sequence stratigraphy and also analyzed the reservoir interlayer heterogeneity.

班公湖带多不杂超大型富金斑岩铜矿床的成岩成矿年代学、岩石学及高氧化岩浆¬流体-成矿作用

Duobuza copper deposit, newly discovered typical gold-rich porphyry copper deposit with superlarge potential, is located in the Tiegelong Mesozoic tectonic -magmatic arc of the southern edge of Qiangtang block and the northern margin of Bangonghu-Nujiang suture. Quartz diorite porphyrite and grandiorite porphyry, occurred in stock, are the main ore-bearing porphyries. As the emplacement of porphyry stock, a wide range of hydrothermal alteration has developed. Within the framework of the ore district, abundant hydrothermal magnetite developed, and the relationship between precipitation of copper and gold and hydrothermal magnetite seems much close. Correspondingly, a series of veinlets and network veinlets occurred in all alteration zones. Therefore, systematic research on such a superlarge high-grade Duobuza gold-rich porphyry copper deposit can fully revealed the metallogenic characteristics of gold-rich porphyry copper deposits in this region, establish metallogenetic model and prospecting criteria, and has important practical significance on the promotion of regional exploration. In addition, this research on it can enrich metallogenic theory of strong oxidation magma-fluid to gold-rich porphyry copper deposit, and will be helpful to understand the metallogenic characteristics in early of subduction of Gangdese arc stages and its entire evolution history of the Qinghai-Tibet Plateau, the temporal and spatial distribution of ore deposits and their geodynamics settings. Northern ore body of Duobuza copper deposit have been controlled with width (north-south) about 100 ~ 400 m, length (east-west) about 1400 m, dip of 200 °, angle of dip 65 °~ 80 °. And controlled resource amount is of 2.7 million tons Cu with grade 0.94% and 13 tons Au with 0.21g/tAu. Overall features of ore body are large scale, higher grade copper, gold-rich. Ore occurred in the body of granodiotite porphyry and quartz diorite porphyrite and its contact zone with wall rock. Through the detailed mapping and field work studies, some typies of alteration are identificated as follows: albitization, biotititation, sericitization, silication, epidotization, chloritization, carbonatization, illitization, kaolinization and so on. The range of alteration is more than 10km2. Wall alteration zone can be divided into potassic alteration, moderate argillization alteration, argillization, illite-hydromuscovite or propylitization from ore-bearing porphyry center outwards, but phyllic alteration has not well developed and only sericite-quartz veins occurred in local area. Moreover, micro-fracture is development in ore district , and correspondingly a series of veinlets are development as follows: biotite vein (EB type), K-feldspar-biotite-chalcopyrite-quartz vein, magnetite-antinolite-K-feldspar vein, quartz-chalcopyrite-magnetite veins (A-type), quartz-magnetite-biotite-K-feldspar vein, chalcopyrite veinlets in potassic alteration zone; (2) chalcopyrite occurring in the center vein–quartz vein (B type), chalcopyrite veinlets, chalcopyrite-gypsum vein in intermediate argillization alteration; (3) chalcopyrite- pyrite-quartz vein, pyrite-quartz vein, chalcopyrite-gypsum veins, quartz-gypsum- molybdenite-chalcopyrite vein in argillization alteration; (4) gypsum veins, quartz-(molybdenite)-chalcopyrite vein, quartz-pyrite vein, gypsum- chalcopyrite vein, potassium feldspar veinlets, Carbonate veins, quartz-magnetite veins in the wall rock. In short, various veins are very abundant within the framework of the ore district. The results of electronic probe microscopy analysis (EMPA) indicate that Albite (Ab 91.5~99.7%) occurred along the rim of plagioclase phenocryst and fracture, and respresents the earliest stages of alteration. K-feldspar (Or 75.1~96.9%) altered plagioclase phenocryst and matrix or formed secondary potassium feldspar veinlets. Secondary biotite occurred mainly in phenocryst, matrix and veinlets, belong to magnesium-rich biotite formed under the conditions of high-oxidation magma- hydrothermal. Chloritization developed in all alteration zones and alterd iron- magnesium minerals such as biotite and hornblende and then formed chlorite veinlets. As the temperature rises, Si in the tetrahedral site of chlorite decreased, and chlorite component evolved from diabantite to ripiolite. The consistent 280℃~360℃ of formation temperature hinted that chlorite formed on the same temperature range in all alteration zones. However, formation temperature range of chlorite from the gypsum-carbonate-chlorite vein was 190℃~220℃, and it may be the product of the latest stage of hydrothermal activity. The closely relationship between biotite and rutile indicate that most of rutiles are precipitated in the process of biotite alteration and recrystallization. In addition, the V2O3 concentration of rutile from ore body in Duobuza gold-rich porphyry copper deposit is >0.4％, indicate that V concentration in rutile has important significance on marking main ore body of porphyry copper deposit. Apatites from Duobuza deposit all are F-rich. And apatite in the wall rock contained low MnO content and relatively high FeO content, which may due to the basaltic composition of the wall rocks. The MnO in apatite from altered porphyry show a strong positive correlation with FeO. In addition, Cl/F ratio of apatite from wall rock was highest, followed by the potassic alteration zone and potassic alteration zone overprinted by moderate argillization alteration was the lowest. SO2 in Apatite are in the scope of 0 to 0.66%, biotite in the apatite has the highest SO2, followed by the potassic alteration zone, potassic alteration zone overprinted by moderate argillization alteration, and the lowest in the surrounding rocks, which may be caused by the decrease of oxygen fugacity of hydrothermal fluid and S exhaust by sulfide precipitation in potassic alteration. Magnetite in the wall rock have higher Cr2O3 and lower Al2O3 features compared with altered porphyry, this may be due to basalt wall rock generally has high Cr content. And magnetites have higher TiO2 content in potassic alteration than moderate argillization alteration overprinted by potassic alteration, argillization and wall rock, suggested that its formation temperature in potassic alteration was the highest among them. The ore minerals mainly are chalcopyrite and bornite, and Au contents of chalcopyrite, bornite, and pyrite are similar with chalcopyrite slightly higher. The Eu* negative anomaly of disseminated chalcopyrite was relatively lower than chalcopyrite in veinlets. Within a drill hole, the Eu* negative anomaly of disseminated chalcopyrite was gradually larger from bottom to top. Magnetite has the same distribution model, with obvious negative Eu* abnormal, and ΣREE in great changes. The gypsum has the highest ΣREE content and the obvious negative anomaly, and biotite obviously has the Eu* abnormal. Based on the petrographic and geochemical characteristics, five series of magmatic rocks can be broadly classified; they are volcanic rocks of the normal island arc, high-Nb basaltic rocks, adakites, altered porphyry and diorite. The Sr, Nd, Hf isotopes and geochemistry of various series of magmatic rock show that they may be the result of mixing between basic magma and various degrees of acid magma coming from lower crust melted by high temperature basic underplating from partial melting of the subduction sediment melt metasomatic mantle wedge. Furthermore S isotope and Pb isotope of the sulfide, ore-bearing porphyries and volcanic rocks indicated ore-forming source is the mantle wedge metasomatied by subduction sediment melt. Oxygen fugacity of magma estimated by Fe2O3/FeO of whole rock and zircon Ce4+/Ce3+ indicated that the oxidation of basalt-andesitic rocks is higher than ore-forming porphyry, and might imply high-oxidation characteristics of underplated basic magma. Its high oxidative mechanism is likely mantle sources metasomatied by subduction sediment magma, including water and Fe3+. And such high oxidation of basaltic magma is conducive to the mantle of sulfides in the effective access to melt. And the An component of dark part within plagioclase phenocryst zoning belong to bytownite (An 74%), and its may be a result of magma composition changes refreshment by basaltic magma injection. SHRIMP zircon U-Pb and LA-ICP-MS zircon U-Pb geochronology study showed that the intrusions and volcanic rocks from Duobuza porphyry copper deposit belong to early Cretaceous magma series (126~105Ma). The magma evolution series are as follows: the earliest diorite and diorite porphyrite → ore-bearing porphyry and barren grandiorite porphyry →basaltic andesite → diorite porphyrite → andesite → basaltic andesite, and magma component shows a evolution trend from intermediate to intermediate-acid to basic. Based on the field evidences, the formation age of high-Nb basalt may be the latest. The Ar-Ar geochronology of altered secondary biotite, K-feldspar and sericite shows that the main mineralization lasting a interval of about 4 Ma, the duration limit of whole magma-hydrothermal evolution of about 6 Ma, and possibly such a long duration limit may result in the formation of Duobuza super-large copper deposit. Moreover, tectonic diagram and trace element geochemistry of volcanic rocks and diorite from Duobuza porphyry copper deposit confirm that it formed in a continental margin arc environment. Zircon U-Pb age of volcanic rocks and porphyry fall in the range of 105~121Ma, and Duobuza porphyry copper deposit locating in the north of the Bangonghu- Nujiang suture zone, suggested that Neo-Tethys ocean still subducted northward at least early Cretaceous, and its closure time should be later than 105 Ma. Three major inclusion types and ten subtypes are distinguished from quartz phenocrysts and various quartz veins. Vapor generally coexisting with brine inclusions, suggest that fluid boiling may be the main ore-forming mechanism. Raman spectrums of fluid inclusions display that the content of vapor and liquid inclusion mainly contain water, and vapor occasionally contain a little CO2. In addition, the component of liquid inclusions mainly include Cl-, SO42-, Na+, K+, a small amount of Ca2+, F-; and Cl- and Na+ show good correlation. Vapor mainly contains water, a small amount of CO2, CH4 and C2H6 and so on. The daughter minerals identified by Laman spectroscopy and SEM include gypsum, chalcopyrite, halite, sylvite, rutile, potassium feldspar, Fe-Mn-chloride and other minerals, and ore-forming fluid belong to a complex hydrothermal system containing H2O-NaCl-KClFeCl2CaCl2. H and O isotopic analysis of quartz phenocryst, vein quartz, magnetite, chlorite and gypsum from all alteration zones show that the ore-forming fluid of Duobuza gold-rich porphyry copper deposit consisted mainly of magmatic water, without addition of meteric water. Duobuza gold-rich porphyry copper deposit formed by the primary magmatic fluid (600-950C), which has high oxidation, ultra-high salinity and metallogenic element-rich, exsolution direct from the magma, and it is representative of the typical orthomagmatic end member of the porphyry continuum. Moreover, the fluid evolution model of Duobuza gold-rich porphyry copper deposit has been established. Furthermore, two key factors for formation of large Au-rich porphyry copper deposit have been summed up, which are ore-forming fluids earlier separated from magma and high oxidation magma-mineralization fluid system.

Photodissociation of 1-bromo-2-chloroethane at 266 nm

The photodissociation of CH2BrCH2Cl at 266 nm has been investigated on the universal crossed molecular beam machine. The primary dissociation step leads exclusively to the formation of CH2CH2Cl radicals and Br atoms in the electronic ground state as well as in the spin-orbit excited state, with a branching ratio 2 +/- 1:8 +/- 1. Photofragment total c.m. translational energy distribution P(E-t) has been obtained and about 64% of the available energy is partitioned into translational energy for Br channel and about 28.5% of the available energy is partitioned into translational energy for Br* channel. The anisotropy parameters are determined to be beta(Br*) = 0.8 +/- 0.2 and beta(Br) = -0.6 +/- 0.2, respectively. Some CH2CH2Cl radicals with large internal excitation (corresponding to formation of ground state Br channel) may undergo secondary dissociation to form CH2CH2 +/- Cl. The experimental results are discussed in terms of a model that involves the initial excitation of two repulsive electronic states: one from an parallel transition to the (3)Q(0) state, and the other from a perpendicular transition to the (3)Q(1), (1)Q states. (C) 1999 Elsevier Science B.V. All rights reserved.

2型糖尿病患者认知功能特点及相关影响因素研究

Objective: Type 2 diabetes patients’ performances of action memory , semantic memory and working memory and the related factors were explored. Methods: 60 Type 2 diabetes patients were compared with 60 age and gender and level of education matched non-diabetes controls. Mood were tested by SAS and SDS, MMSE was used to test the basic cognitive function, Trail Making Test A and B, Verbal fluency test, Go-No/Go test, and Stroop color-word test were used to investigate the executive function of Type 2 diabetes patients and normal controls (NC). Patients’ GLU, TG, TCH, HbA1c, insulin and Cp were tested and correlated with their action memory and working memory. Results: There was no difference between NC group and Type 2 diabetes patients in MMSE scores. There is depression and anxiety mood in Type 2 diabetes patients. Type 2 diabetes patients get lower score in action memory test. Comparing to NC group, Type 2 diabetes patients performed significantly worse in Trail Making Test A and B and verbal fluency test. In Stroop Test, NC group showed significant Stroop Effect and Repeated Distraction Promotion Effect and Negative Priming Effect. However, In Type 2 diabetes group, only the Stroop Effect appeared, but no Repeated Distraction Promotion Effect and Negative Priming Effect. There is no difference between Type 2 diabetes and NC in Stroop Effect. In Go-No/Go test, both of two groups showed significant Stroop Effect, however, there was no difference between them. And also there is no difference on error rate of all levels between them. The course of disease, GL, HbA1c, TG, TCH, INS and Cp affected action memory and working memory. Conclusion: Type 2 diabetes patients’ action memory, semantic memory and working memory were partially impaired. Controlling the levels of GLU, TG and TCH can delay these kinds of impairment.

学习不良少年的自我意识情绪研究

Self-conscious emotions (guilt, shame, embarrassment, pride, etc) are social emotions, and involve complex appraisals of how one’s behavior has been evaluated by the self and other people according to some value standards. Self-conscious emotions play an important role in human life by arousing and regulating human action tendencies, feeling and thoughts, which can promote people to work hard in achievement and task fields, maintain good interpersonal relationship according with social morality and expectation. The present study aimed to examine complex self-conscious emotional understanding capabilities in junior middle school students with and without learning disabilities, how the self-conscious emotions generate, and relationship between self-conscious emotions and self-representation in academic and interpersonal fields. Situational experimental methods were used in this research, and the results would give further supports for learning disabilities intervention. The main results of present research are as follows. 1. The study included 4 parts and 6 experiments. The aim of study 1 was to explore whether juveniles with learning disabilities understood complex self-conscious emotions differently from juveniles without learning disabilities. We surveyed the self-conscious emotions understanding of 37 learning disabilities and 45 non-learning disabilities with the emotional situation stories. The results indicated that the self-conscious emotional recognition in others for learning disabilities was lower than that of non-learning disabilities in different emotional recognition tasks. Moreover, children with learning disabilities were more inclined to recognize emotions in themselves as elemental emotions, however, children without learning disabilities were more inclined to recognize emotions in themselves as self-conscious emotions. 2. The aim of study 2 was to explore the generative mechanism of self-conscious emotions in academic and interpersonal fields with the method of situational experiments, namely to examine whether the self-discrepancy could cause self-conscious emotions for learning disabilities. 84 learning disabilities (in experiment 1) and 80 learning disabilities (in experiment 2) participated in the research, and the results were as follows. (1) Self discrepancy caused participants’ self-conscious emotions effectively in academic and interpersonal fields. One’s own and parents’ perspercive on the actual-ideal self-discrepancy both produced dejection-related emotions (shame、embarrassment) and agitation-related emotions (guilt). （2）In academic fields, children with learning disabilities caused higher level negative self-conscious emotions (embarrassment, shame, and guilt) and lower level positive self-conscious emotion (pride). However, there were no differences of self-conscious emotions for children with and without learning disabilities in non-academic fields. 3. The aim of study 3 was to explore what influence had self-conscious emotions on self-representation for learning disabilities with the method of situational experiments. 57 learning disabilities (in experiment 1) and 67 learning disabilities (in experiment 2) participated in the research, and the results were as follows. （1）The negative self-conscious for learning disabilities could influence their positive or negative academic and positive interpersonal self-representation stability, the ways in which self-evaluation of ability mediate these effects. However, there was no significant effect for the negative self-conscious and self-evaluation of ability predicting negative interpersonal self-representation stability. （2）The stability level of positive academic and interpersonal self-representation for learning disabilities was lower than that of non-learning disabilities. There was no significant difference of the negative interpersonal self-representation stability for children with and without learning disabilities in the positive self-conscious valence condition. However, the stability level of negative interpersonal self-representation for learning disabilities was lower than that of non-learning disabilities in the negative self-conscious valence condition. 4. The aim of study 4 was to explore the intervention effects for self-conscious emotions training course on emotional comprehension cability. 65 learning disabilities (34 in experimental group, and 31 in control group) participated in the research. The results showed that self-conscious emotions course boosted the self-conscious emotions apprehensive level for children with learning disabilities.

Heat capacity and thermodynamic properties of N-(2-cyanoethyl) aniline (C9H10N2)

The low temperature heat capacities of N-(2-cyanoethyl)aniline were measured with an automated adiabatic calorimeter over the temperature range from 83 to 353 K. The temperature corresponding to the maximum value of the apparent heat capacity in the fusion interval, molar enthalpy and entropy of fusion of this compound were determined to be 323.33 +/- 0.13 K, 19.4 +/- 0.1 kJ mol(-1) and 60.1 +/- 0.1 J K-1 mol(-1), respectively. Using the fractional melting technique, the purity of the sample was determined to be 99.0 mol% and the melting temperature for the tested sample and the absolutely pure compound were determined to be 323.50 and 323.99 K, respectively. A solid-to-solid phase transition occurred at 310.63 +/- 0.15 K. The molar enthalpy and molar entropy of the transition were determined to be 980 +/- 5 J mol(-1) and 3.16 +/- 0.02 J K-1 mol(-1), respectively. The thermodynamic functions of the compound [H-T - H-298.15] and [S-T - S-298.(15)] were calculated based on the heat capacity measurements in the temperature range of 83-353 K with an interval of 5 K. (c) 2004 Elsevier B.V. All rights reserved.