Structure/permeability and permselectivity relationship of polyetherimides from 1,4-bis(3,4-dicarboxyphenoxy) benzene dianhydride .2.

Gas permeability coefficients of a series of aromatic polyetherimides, which were prepared from 1,4-bis(3,4-dicarboxyphenoxy) benzene dianhydride (HQDPA) with various aromatic diamines, to H-2, O-2 and N-2 have been measured under 7 atm and at the temperature range 30-100 degrees C. A significant change in the permeability and permselectivity resulting from the systematic variation in chemical structure of the polyetherimides was found. Among the polyetherimides, that were prepared from phenylenediamine and methyl substituted phenylenediamines, the increase of permeability is accompanied by a decrease of permselectivity. The polyetherimides that were prepared from 3,5-diaminobenzoic esters have lower permselectivity than the others. However, the polyetherimide from 3,5-diaminobenzoic acid possesses much higher permselectivity than the others due to cross-linking. Copyright (C) 1996 Elsevier Science Ltd

Effects of molecular structure on the permeability and permselectivity of aromatic polyimides

Permeability coefficients of H-2, O-2, and N2 were measured under 10 atm at the temperature from ambient temperature up to 150 degrees C in a series of structurally different aromatic homo- and copolyimides, which were prepared from 4,4'-oxydianiline (ODA) or 4,4'-methylene dianiline (MDA) with various aromatic dianhydrides. The study shows that the molecular structure of the polyimides strongly influences gas permeability and permselectivity. As a result, the permeability coefficients of the polyimide membranes for each gas vary by over two orders of magnitude. In general, among the polyimide membranes studied, the increase in permeability of polymers is accompanied by the decrease in permselectivity, and the MDA-based polyimide membranes have higher permeability than ODA-based ones. Among the polyimides prepared from bridged dianhydrides, the permeability coefficients to H-2, O-2, and N-2 are progressively increased in the order BPDA < BTDA < ODPA similar to TDPA < DSDA ( SiDA < 6FDA, while H-2/N-2 and O-2/N-2 permselectivity coefficients are progressively decreased in the same order. The copolyimide membranes, which were prepared from 3,3',4,4' biphenyltetracarboxylic dianhydride (BPDA), bis(3,4-dicarboxyphenyl)dimethylsilane dianhydride (SiDA), and ODA, have favorable gas separation properties and are useful for H-2/N-2 separation applications. (C) 1996 John Wiley & Sons, Inc.

Syntheses and crystal structures of [(C6H5CH2C5H4)(2)GdCl center dot THF](2) and (C6H5CH2C5H4)(2)ErCl center dot THF

[(C6H5CH2C5H4)(2)GdCl . THF](2) (1) and (C6H5CH2C5H4)(2)ErCl . THF (2) were prepared by the reaction of LnCl(3) (Ln=Gd, Er) with benzylcyclopentadienyl sodium in THF and characterized by elemental analysis, IR, H-1 NMR, C-13 NMR, MS and thermal gravimetry. The crystal structures of both compounds were determined. Complex 1 is dimeric and its structure belongs to the monoclinic, P2(1)/c space group with a=1.1432(2), b=1.2978(2), c=1.7604(3) nm, beta=108.75(2), V=2.4732(9) nm(3), Z=2(four monomers), D-c=1.54 g . cm(-3). R=0.0342 and R(w)=0.0362. Complex 2 is monomer and its structure belongs to the orthorhombic, P2(1)2(1)2(1) space group with a=0.8645(2), b=1.1394(3), c=2.5289(4) nm, V=2.4919(9) nm(3), Z=4, D-c=1.56 g . cm(-3). R=0.0514, R(w)=0.0529. The determination of the crystal structure shows that in complex 1 the benzyl groups on the cyclopentadienyls coordinated to Gd3+ are located in the opposite direction (139 degrees); in complex 2 the benzyl groups on the cyclopentadienyls coordinated to Er3+ are located in the same direction (6.5 degrees).

Synthesis and crystal structure of [(C8H8)(3)(C6H5CH2C5H4)Nd2K(THF)3]

NdCl3 reacted with C6H5CH2C5H4Na in the ratio 1:1 at -78 degrees C giving [C6H5 CH2C5H4NdCl2 . nTHF], which then was reacted with C8H8K2/THF to yield the title complex [(C8H8)(3)(C6H5CH2C5H4)Nd2K(THF)(3)] (C6H5CH2C5H4 = benzylcyclopentadienyl). The crystal structure of the Nd complex was determined by X-ray diffraction and revealed that the benzyl group is coordinated to the potassium atom to form a new type of trinuclear complex [(eta(8)-C8H8)Nd(mu(2)-eta(8)-C8H8K(THF) (eta(3)-C6H5CH2-mu(2)-eta(5)-C5H4)Nd (THF)(2)(eta(8)-C8H8)]. Copyright (C) 1996 Elsevier Science Ltd.

Chlorination and oxidation of aromatic polyamides .1. Synthesis and characterization of some aromatic polyamides

The synthesis is described of some aromatic polyamides based on unsubstituted, and methyl-, carboxy-, and sulfo-substituted diamines by interfacial polycondensation. Some of them are crosslinked and some of them contain heterocyclic aromatic rings. Their chemical structures are characterized by IR and C-13 solid-state NMR spectra and the spectra are interpreted. (C) 1996 John Wiley & Sons, Inc.

Structure/permeability and permselectivity relationship of polyetherimides from 1,4-bis(3,4-dicarboxyphenoxy) benzene dianhydride .1.

Gas permeability coefficients of a series of aromatic polyetherimides, which were prepared from 1,4-bis(3,4-dicarboxyphenoxy) benzene dianhydride (HQDPA) and various aromatic diamines, to H-2, CO2, O-2, N-2 and CH4 have been measured under 7 atm pressure and over the temperature range 30-150 degrees C. A significant change in permeability and permselectivity, which resulted from a systematic variation in chemical structure of the polyetherimides, was found. Generally, increases in permeability of the polyetherimides are accompanied by decreases in permselectivity. The order of decrease of the permeability coefficients is as follows: HQDPA-IPDA > HQDPA-DDS > HQDPA-MDA > HQDPA-ODA > HQDPA-DABP > HQDPA-BZD. However, HQDPA-DMoBZD and HQDPA-DMoMDA, with bulky methoxy side-groups on the aromatic rings of the diamine residue, display both high permeability coefficients and high permselectivity. The favourable gas separation property, excellent thermal and chemical stability, and high mechanical strength make HQDPA-DMoBZD and HQDPA-DMoMDA promising candidates for membrane-based gas separation applications.

Structure/permeability and permselectivity relationship of polyetherimides from 1,4-bis(3,4-dicarboxyphenoxy) benzene dianhydride .3.

Gas permeability coefficients of a series of aromatic polyetherimides prepared from 1,4-bis(3,4-dicarboxyphenoxy) benzene dianhydride (HQDPA) and four (methylene dianiline)s with a methyl side group to H-2, CO2, O-2, N-2, and CH4 were measured under 7 atm and within a temperature range from 30 to 150 degrees C. The gas permeabilities and permselectivities of these polymers were compared with those of the HQDPA-based polyetherimides from methylene dianiline (MDA) and isopropylidene dianiline (IPDA). The number and position of the methyl side groups on the benzene rings of the diamine residues strongly affect the gas permeabilities and permselectivities of the HQDPA-based polyetherimides. The gas permeability of the polyetherimide progressively increases with an increase in the number of the methyl side groups. Both the gas permeability and permselectivity of the polyetherimides with methyl side groups are higher than those of HQDPA-MDA. The polyetherimide prepared from 3,3'-dimethyl 4,4'-methylene dianiline (DMMDA1) possesses both higher permeability and permselectivity than the polyetherimides prepared from 2,2'-dimethyl 4,4'-methylene dianiline (DMMDA2). However, two of the polyetherimides prepared 2,2',3,3'-tetramethyl 4,4'-methylene dianiline (TMMDA1) or 2,2', 5,5'-tetramethyl 4,4'-methylene dianiline (TMMDA2) possess almost the same gas permeability and permselectivity.

POLY(AZOMETHINE SULFONES) WITH THERMOTROPIC LIQUID-CRYSTALLINE BEHAVIOR

New poly(azomethine sulfones) with linear structures containing sulfonyl bis(4-phenoxyphenylene) and oxo bis(benzylideneaniline) or methylene bis(benzylideneaniline) units were prepared in the conventional literature manner by condensing the dialdehyde sulfone monomer (V) with diamines such as 4,4'-oxydianiline (IIIa) and 4,4'-methylenedianiline (IIIb), or by condensing an azomethine biphenol (IX) with 4,4'-sulfonyldichlorobenzene (II). Three model compounds which reproduced the above structures were also synthesized. The resulting polymers were confirmed by IR, H-1-NMP, and elemental analysis, and were characterized by inherent viscosities, thermogravimetric analysis (TGA), and x-ray diffraction. The thermotropic liquid crystalline (TLC) behavior was studied using polarization light microscopy (PLM), thermooptical analysis (TOA), and DSC. A nematic texture was observed only for 4,4'-oxydianiline-units-based polymers. The reaction of polymer VIIIb containing -CH2- links between the mesogens with the model compound IX led to polymer X which exhibited TLC behavior.

A Study on the Unimolecular Decomposition of the Doubly Charged Ions Produced from 4 Chloro-toluene Isomers

The unimolecular charge separations and neutral loss decompositions of the doubly charged ions [C7H7Cl](2+), [C7H6Cl](2+) and [C7H5Cl](2+) produced in the ion source by 70 eV electron impact from 3 chloro-toluenes and benzyl chloride isomers were studied

THE CATALYTIC ACTIVITY OF HETEROPOLY ACIDS (SALTS) AND MONO-LACUNARY HETEROPOLY TUNGSTOPHOSPHORIC COMPOUND IN THE OXIDATION OF ALCOHOLS

The catalytic activity of heteropoly compounds in the oxidation of benzyl alcohol and cyclohexa nol under phase transfer conditions has been studied. The catalytic activity of six kinds of heteropoly acids with Keggin structure will drop by the order of GeMo12 (H4GeMo12O40). PW12, PMo12, SiMo12, GeW12 and SiW12. When the three protons of H3PW12O40 Were replaced by Na+ step by step, the catalytic activity will raise gradually with the drop of acidity. The addition of base and trace amount of sulfuric acid to the reaction system resulted in an increase of catalytic activity. It was found that catalytic activity of mono-lacunary heteropoly compounds is higher than that of the primary heteropoly acids (or salts). The catalytic oxidation system of HPA-H2O2-PTC is very active in the oxidation of benzyl alcohol ana cyclohexanol, but it has little activity in the oxidation of inactive compounds such as n(or iso)-proplalcohol. n-butyl alcohol and n-hexanol. Solvent has great effect on reaction, when polar compounds such as water were used as solvent, the catalytic activity is better than that when non-polar compounds were used as solvent.

BETA-RELAXATION IN POLYIMIDES

A series of polyimides with different structures have been synthesized and studied by dynamic mechanical analysis. The results obtained indicate that the beta relaxation in polyimides is related to the rotation of rigid segment(s) of p-phenylene and imide groups around 'hinges' such as -O-, -CH2- and so on in diamines. It is noticed that two kinds of polyimides both with [GRAPHICS] imide groups have verv weak beta relaxation below the glass transition temperature. This phenomenon is due to the fact that the configuration of chains with the above imide groups hinders the rotation of the rigid segments in the chains.

ELECTROLYTE EFFECTS ON THE ELECTROCHEMICAL POLYMERIZATION OF N-BENZYLANILINE

The electrochemical behaviour of N-benzylaniline polymerization is determined by the nature of the electrolyte. The voltammograms for a poly-N-benzylaniline modified Pt electrode prepared in 1 M HCl (abbreviated to PBAn(HCl)), and 1 M H2SO4 (PBAn(H2SO4)) tested in 1 M hydrochloric, sulfuric, and perchloric acid were almost superimposable. The polymer film electrode prepared in 1 M HClO4 (abbreviated to PBAn(HClO4)) is electroinactive, and exhibits only charging behaviour in 1 M HClO4 solution and can be activated in hydrochloric or other acid electrolytes with a smaller anion. These interesting phenomena are explained in terms of the anions catalyzing the loss of benzyl groups.

ASYMMETRIC ALKYLATION MEDIATED BY CHIRAL PHASE-TRANSFER CATALYSTS

Seven chiral phase-transfer catalysts, among which three have not been reported so far, have been prepared and applied to the asymmetric alkylation of alpha-isopropyl benzyl cyanide and alpha-isopropyl-p-chlorobenzyl cyanide. The result showed that short reaction time, low temperature, high catalyst concentration and non-polar solvent would improve the optical yield. The influence of structure of the catalyst on the asymmetric reaction was preliminarily studied. The optical purity of the products were evaluated by gas chromatography with a chiral column.

BLENDS OF PHENOLPHTHALEIN POLY(ETHER ETHER KETONE) WITH PHENOXY AND EPOXY-RESIN

The properties of miscible phenolphthalein poly(ether ether ketone)/phenoxy (PEK-C/phenoxy) blends have been measured by dynamic mechanical analysis and tensile testing. The blends were found to have single glass transition temperatures (T(g)) that vary continuously with composition. The tensile moduli exhibit positive deviations from simple additivity. Marked positive deviations were also observed for tensile strength. The tensile strengths of the 90/10 and 75/25 PEK-C/phenoxy blends are higher than those of both the pure components. Embrittlement, or transition from the brittle to the ductile mode of failure, occurs in the composition range of 50-25 wt% PEK-C. These observations suggest that mixing on the segmental level has occurred and that there is enough interaction between the components to decrease its internal mobility significantly. PEK-C was also found to be miscible with the epoxy monomer, diglycidyl ether of bisphenol A (DGEBA), as shown by the existence of a single glass transition temperature (T(g)) within the whole composition range. Miscibility between PEK-C and DGEBA could be considered to be due mainly to entropy. However, PEK-C was judged to be immiscible with the diaminodiphenylmethane-curved epoxy resin (DDM-cured ER). It was observed that the PEK-C/ER blends have two T(g), which remain invariant with composition and are almost the same as those of the pure components, respectively. Scanning electron microscopy showed that the PEK-C/ER blends have a two-phase structure. The different miscibility with PEK-C between DGEBA and the DDM-cured ER is considered to be due to the dramatic change in the chemical and physical nature of ER after curing.

Hymeniacidon perleve associated bioactive bacterium Pseudomonas sp NJ6-3-1

Among marine bacteria isolated from the cytotoxic sponge Hymeniacidon perleve, one strain NJ6-3-1 classified as Pseudomonas sp. showed both cytotoxic and antimicrobial activities. Fatty acid analysis indicated that the bacterial strain consists mainly of C16:1, C16:0, C18:1, C18:0, C15:0, C14:0. One unusual 9,10-cyclopropane-C17:0 fatty acid and C26:0 also constitute major components, as well as the existence of squalene, the precursor of triterpenoids. The major metabolites in the culture broth were identified as alkaloids, including diketopiperazines and indole compounds, namely 3,6-diisopropylpiperazine-2,5-dione, 3-benzyl-3-isopropylpiperazine-2,5-dione, 3,6-bis-(2-methylpropyl)-piperazine-2,5-dione, indole-3-carboxaldehyde, indole-3-carboxylic acid methyl ester, indole-3-ethanol, and quinazoline-2,4-dione.