黄土高原半干旱区集流灌草立体配置与水分调控

该区干旱与水土流失并存 ,降雨量时空分配不均 ,且水热并不同步 (在春夏 ,植物常因缺水而枯死 ) ,致使生态环境建设中恢复植被的难度大。为此 ,采用工程整地措施与灌草立体配置模式 ,发展集流灌草植被 ,调蓄土壤水分 ,促进灌草植被的快速恢复。结果表明 ,在水平阶营造柠条和披碱草 ,在生长初期 0～ 50 0 cm土层含水量可分为 3个明显的层次 ;在生长的第 4年随着灌草根系深扎 ,土壤水分过耗 ,出现明显的干土层 ,分布深度在 1 2 0～ 2 0 0 cm,厚度为 1 0 0 cm。在第 8年干土层扩大到 1 0 0～ 30 0 cm,厚度为 2 0 0 cm。第 1 4年土壤含水量有所回升 ,但幅度不大 ,同第 8年相比 ,仅提高 1 .5～ 2 .0个百分点。水平阶的柠条灌木林随着生长时间的延续 ,其水分贮量变化是否增加 ,仍有待继续研究。该区 0～ 50 0 cm多年土壤贮水量 ,在生长初期 ( 4月份 ) ,1 5年生柠条480 .1 5mm,1 2年生沙棘、山桃分别为 41 4.6mm和 385.4mm,在生长末期 ( 1 0月 ) ,柠条 498.31mm,沙棘 42 3.31 mm,山桃 ...

银杏种子生长特性及其生理变化的研究

从纵径、横径、体积、重量等方面分析了银杏种子的生长特性及其生长过程中水分、糖类物质、脂肪酸、氨基酸的生理变化 .结果表明 ,银杏种子的生长过程曲线为典型的单“S”型 ,种子纵径、横径、体积、重量、绝对含水量随生长过程呈“S”形变化 .各种生理物质含量随种子生长过程呈规律性变化 ,且各有其特点 .其中在种子生长后期糖类物质总量表现出上升的趋势 ,表明它们是种子中主要的营养储存物质 .成熟种子含淀粉 8.4%、葡萄糖 6.7%、果糖 4.2 %、多糖 0 .0 2 %、二糖 0 .0 1% ;含肉豆蔻酸 10 .6%、棕榈烯酸 4.1%、亚麻酸 2 .4%、硬脂酸1.9%、油酸 1.1%、亚油酸 0 .4% .银杏种子富含 15种氨基酸 ,成熟种子中总含量为 1.5 6g·10 0 g-1FW ,其中以赖氨酸、天门冬氨酸、丙氨酸、精氨酸、组氨酸、谷氨酸、异亮氨酸的含量较高 ,它们的含量依次为 0 .2 87%、0 .163 %、0 .13 6%、0 .13 3 %、0 .12 3 %、0 .115 %、0 .0 95 % .

Effects of inoculated Microcoleus vaginatus on the structure and function of biological soil crusts of desert

Microcoleus vaginatus Gom., the dominant species in biological soil crusts (BSCs) in desert regions, plays a significant role in maintaining the BSC structure and function. The BSC quality is commonly assessed by the chlorophyll a content, thickness, and compressive strength. Here, we have studied the effect of different proportions of M. vaginatus, collected from the Gurbantunggut Desert in northwestern China, on the BSC structure and function under laboratory conditions. We found that when M. vaginatus was absent in the BSC, the BSC coverage, quantified by the percentage of BSC area to total land surface area, was low with a chlorophyll a content of 4.77 x 10(-2) mg g(-1) dry soil, a thickness of 0.86 mm, and a compressive strength of 12.21 Pa. By increasing the percentage of M. vaginatus in the BSC, the BSC coverage, chlorophyll a content, crust thickness, and compressive strength all significantly increased (P < 0.01). The maximum chlorophyll a content (13.12 mg g(-1)dry soil), the highest crust thickness, and the compressive strength (1.48 mm and 36.60 Pa, respectively) occurred when the percentage of inoculated M. vaginatus reached 80% with a complex network of filaments under scanning electron microscope. The BSC quality indicated by the above variables, however, declined when the BSC was composed of pure M. vaginatus (monoculture). In addition, we found that secretion of filaments and polymer, which stick sands together in the BSC, increased remarkably with the increase of the dominant species until the percentage of M. vaginatus reached 80%. Our results suggest that not only the dominant species but also the accompanying taxa are critical for maintaining the structure and functions of the BSC and thus the stability of the BSC ecosystems.

The microstructures and mechanical properties of cast Mg-Zn-Al-RE alloys

The microstructures and mechanical properties of cast Mg-Zn-Al-RE alloys with 4 wt.% RE and variable Zn and At contents were investigated. The results show that the alloys mainly consist of alpha-Mg, Al2REZn2, Al4RE and tau-Mg-32(Al,Zn)(49) phases. and a little amount of the beta-Mg17Al12 phase will also be formed with certain Zn and At contents. When increasing the Zn or At content, the distribution of the Al2REZn2 and Al4RE phases will be changed from cluster to dispersed, and the content of tau-Mg-32(Al,Zn)(49) phase increased gradually. The distribution of the Al2REZn2 and Al4RE phases, and the content of beta- or tau-phase are critical to the mechanical properties of Mg-Zn-Al-RE alloys.

Effects of Y2O3 addition on the phase evolution and thermophysical properties of lanthanum zirconate

Lanthanum zirconate (La2Zr2O7, LZ) powders with the addition of various Y2O3 contents for potential thermal barrier coatings (TBCs) application were synthesized by solid-state reaction. The structure evolution, sintering-resistance and thermophysical properties of the synthesized powders and sintered ceramics were systematically studied. X-ray diffraction (XRD) results indicate that LZ containing 3-12 wt.% Y2O3 mainly keeps a pyrochlore-type structure, and two new phases of LaYO3 and Y0.18Zr0.82O1.91 are also detected. Raman spectra confirm that the higher the Y2O3 content, the easier is the formation of LaYO3.

离子液体[omim][PF_6]的生物降解性研究

以[omim][PF6]为C、N、P营养源驯化活性污泥,考察驯化前后不同活性污泥接种微生物时离子液体的生物降解性,以及在支链上添加酯基对离子液体生物降解性的影响;同时,探讨经过驯化的活性污泥对1-甲基-3-辛基咪唑阳离子基团([omim]+)生物降解的途径.结果表明,通过在支链上添加酯基,可以改善离子液体的生物降解性;以普通的活性污泥为接种微生物的密闭瓶实验表明,[omim][PF6]的生物降解率<20%,属于难生物降解的物质,进入环境后可能产生较长时间的积累;以经过驯化的活性污泥为接种微生物时,可以提高[omim][PF6]的生物降解率到60%左右;在[omim]+的生物降解过程中,会产生1-甲基咪唑阳离子的积累;对[omim]+的生物降解产物的HPLC-MS/MS分析,初步推测[omim]+的生物降解途径.

Effect of Single- and co-Dopant on TL of Sr2Mg(BO3)(2) Phosphor

Sr2Mg(BO3)(2) thermoluminescence (TL) phosphor was synthesized by a high temperature solid state reaction and the effect of Li+, Bi3+, Gd3+ or Ti4+ as a codopant on TL of Sr2Mg(BO3)(2) : Dy was investigated. The results show that Li+ as a codopant improves the emission intensity of high temperature TL peak of Sr2Mg(BO3)(2) : Dy phosphor whereas the addition of Bi3+, Gd3+ or Ti3+ leads to the decrease of TL intensity. The TL emission bands of Sr2Mg(BO3)(2) : Dy phosphors with Li+, Bi3+, Gd3+ or Ti4+ as a codopant are situated at 480, 579, 662 and 755 nm, which were attributed to the characteristic F-4(9/2)-> H-6(15/2), F-4(9/2)-> H-6(13/2), F-4(9/2)-> H-6(11/2) and F-4(9/2)-> H-6(9/2) transitions of Dy3+ ion, consistent with the emission of Sr2Mg(BO3)(2) : Dy phosphors. The kinetics parameters of 234 degrees C TL peak of Sr2Mg(BO3)(2) Dy-0.04(3+), (Li-0.04(+)) phosphor with the values of trap depth E=1.1 eV, frequency factor s=6.3 x 10(9) s(-1) were estimated by a peak shape method, which obey the second order kinetics.

Effect of Single- and co-Dopant on TL of Sr2Mg(BO3)(2) Phosphor(单掺杂与共掺杂离子对Sr_2Mg(BO_3)_2磷光体热释发光的影响)

Sr2Mg(BO3)(2) thermoluminescence (TL) phosphor was synthesized by a high temperature solid state reaction and the effect of Li+, Bi3+, Gd3+ or Ti4+ as a codopant on TL of Sr2Mg(BO3)(2) : Dy was investigated. The results show that Li+ as a codopant improves the emission intensity of high temperature TL peak of Sr2Mg(BO3)(2) : Dy phosphor whereas the addition of Bi3+, Gd3+ or Ti3+ leads to the decrease of TL intensity. The TL emission bands of Sr2Mg(BO3)(2) : Dy phosphors with Li+, Bi3+, Gd3+ or Ti4+ as a codopant are situated at 480, 579, 662 and 755 nm, which were attributed to the characteristic F-4(9/2)-> H-6(15/2), F-4(9/2)-> H-6(13/2), F-4(9/2)-> H-6(11/2) and F-4(9/2)-> H-6(9/2) transitions of Dy3+ ion, consistent with the emission of Sr2Mg(BO3)(2) : Dy phosphors. The kinetics parameters of 234 degrees C TL peak of Sr2Mg(BO3)(2) Dy-0.04(3+), (Li-0.04(+)) phosphor with the values of trap depth E=1.1 eV, frequency factor s=6.3 x 10(9) s(-1) were estimated by a peak shape method, which obey the second order kinetics.

Spectral and electrochemical detection of protonated triplex formation by a small-molecule anticancer agent

Triplex helical formation has been the focus of considerable interest because of possible applications in developing new molecular biology tools as well as therapeutic agents and the possible relevance of H-DNA structures in biology system. We report here that a small-molecule anticancer agent, coralyne, has binding preference to the less stable protonated triplex d(C+-T)(6):d(A-G)(6).d(C-T)(6) over duplex d(A-G)(6).d(C-T)(6) and shows different spectral and electrochemical characteristics when binding to triplex and duplex DNA, indicating that electrochemical technique can detect the less stable protonated triplex formation.

Microstructures, mechanical properties and corrosion behavior of high-pressure die-cast Mg-4Al-0.4Mn-xPr (x=1, 2, 4, 6) alloys

Mg-4Al-0.4Mn-xPr (x = 1, 2, 4 and 6 wt.%) magnesium alloys were prepared successfully by the high-pressure die-casting technique. The microstructures, mechanical properties, corrosion behavior as well as strengthening mechanism were investigated. The die-cast alloys were mainly composed of small equiaxed dendrites and the matrix. The fine rigid skin region was related to the high cooling rate and the aggregation of alloying elements, such as Pr. With the Pr content increasing, the alpha-Mg grain sizes were reduced gradually and the amounts of the Al2Pr phase and All, Pr-3 phase which mainly concentrated along the grain boundaries were increased and the relative volume ratio of above two phases was changed. Considering the performance-price ratio, the Pr content added around 4 wt.% was suitable to obtain the optimal mechanical properties which can keep well until 200 degrees C as well as good corrosion resistance. The outstanding mechanical properties were mainly attributed to the rigid casting surface layer, grain refinement, grain boundary strengthening obtained by an amount of precipitates as well as solid solution strengthening.

聚乳酸与聚丙撑碳酸酯共混体系的性能

采用熔融共混的方法制备了聚乳酸(PLA)/聚丙撑碳酸酯(PPC)共混物。DSC测试结果表明,纯PLA和PPC的玻璃化转变温度分别为54和37℃,不同组成的PLA/PPC共混物有2个明显的玻璃化转变温度,且与纯PLA和PPC的玻璃化转变温度相对应,说明二者是不相容体系。力学测试结果表明,当PPC质量分数超过20%时,可以看到明显的屈服点。共混物在拉伸过程中也有明显的颈缩、应力发白现象,表明随着PPC含量增加,PLA/PPC共混物由典型的脆性断裂向韧性转变。随着PPC含量的增加,共混物模量降低,断裂伸长率增加,当PPC质量分数为50%时,共混物的断裂伸长率达到最大值62%。共混物的粘度可在很宽的范围内予以调控,以满足不同加工的需要。

Hydrothermal synthesis of SrCO3 : Eu3+/Tb3+ microneedles and their luminescence properties

SrCO3:Eu3+ /Tb3+ microneedles that grow along the a-axis were successfully prepared through a large-scale and facile hydrothermal method without any template and further annealing treatment. X-ray diffraction (XRD), scanning electron microscopy (SEM), and photoluminescence (PL) spectra as well kinetic decays, were used to characterize the samples. The preferential growth along a-axis for SrCO3:Eu3+/Tb3+ microneedles has been proposed through analysis of the XRD patterns of samples obtained at different hydrothermal treatment time. Under ultraviolet excitation, the SrCO3:Eu3+ and SrCO3:Tb3+ microncedle samples show a strong red and green emission corresponding to the D-5(0)-F-7(j) (J = 1, 2, 3, 4) transitions of Eu3+ and the D-5(4)-(7) F-j (J = 6, 5, 4, 3) transitions of Tb3+, respectively, which have potential applications in lighting fields.

Synthesis, structure, photoluminescence, and electroluminescence properties of a new dysprosium complex

A new dysprosium complex Dy(PM)(3)(TP)(2) [where PM = 1-phenyl-3-methyl-4-isobutyryl-5-pyrazolone and TP = triphenyl phosphine oxide] was synthesized, and its single-crystal structure was also studied. Its photophysical properties were studied by absorption spectra, emission spectra, fluorescence quantum efficiency, and decay time of the f-f transition of the Dy3+ ion. In addition, the antenna effect was introduced to discuss the energy transfer mechanism between the ligand and the central Dy3+ ion. Finally, a series of devices with various structures was fabricated to investigate the electroluminescence (EL) performances of Dy(PM)(3)(TP)(2). The best device with the structure ITO/CuPc 15 nm/Dy complex 70 nm/BCP 20 nm/AlQ 30 nm/LiF 1 nm/Al 100 nm exhibits a maximum brightness of 524 cd/m(2), a current efficiency of 0.73 cd/A, and a power efficiency of 0.16 lm/W, which means that a great improvement in the performances of the device was obtained as compared to the results reported in published literature. Being identical to the PL spectrum, the EL spectrum of the complex also shows characteristic emissions of the Dy3+ ion, which consist of a yellow band at 572 nm and a blue emission band at 480 nm corresponding to the F-4(9/2)-H-6(13/2) and F-4(9/2)-H-6(15/2) transition of the Dy3+ ion, respectively. Consequently, an appropriate tuning of the blue/yellow intensity ratio can be presumed to accomplish a white luminescent emission.