北黄海表层沉积物粒度分布特征及其对沉积环境的指示

本文基于北黄海1140个表层沉积物样品的粒度分析结果，来探讨沉积物粒度组成、分布特征与物源和水动力环境的关系。结果表明，研究区底质类型主要有泥、粉砂、砂质粉砂、粉砂质砂、砂五种类型，少数站位含有砾石。砾石则主要分布在长山列岛附近海域、大连湾口及其东南近海；砂主要分布在123.3°E以东的海域和长山列岛附近海域；粉砂主要分布在研究区的西南部和大连湾外海；粘土的含量较低，含量大于30%的区域仅分布在研究区的西南部，大于16%的区域有向北和东北延伸的趋势，在大连湾至广鹿岛近海沉积物粘土含量也大于16%。 根据对沉积物粒度各粒级的因子分析结果,结合沉积物的Folk分类和Pejrup分类,将北黄海划分成五个主要沉积环境分区，分别受山东半岛沿岸流、黄海暖流、强潮流场、长山列岛和辽东沿岸流控制。北黄海中西部沉积物主要受山东半岛沿岸流影响，经过本区的黄海暖流限制了山东半岛沿岸流携带的细粒物质向东和向北的扩散和运移，研究区东部沉积作用的主控因素是潮流，长山列岛中部海域受附近岛屿剥蚀物影响，大连湾外海受辽东半岛沿岸流控制。研究区西南部细粒沉积物的粒度分布具有不均匀性和南北不对称性，其形成主要受控于山东半岛沿岸流和黄海暖流及其相互作用，潮流可能也起一定作用。

胶州湾百年来沉积环境演变与人类活动影响信息指标的提取

本文以人类活动影响下的典型海湾-胶州湾为研究对象，在对典型柱状沉积物精确定年的基础上，剖析了胶州湾百年来沉积环境演变的过程，通过对沉积物中氮、磷、重金属以及生态环境的综合分析，提取了其受人类活动影响的信息指标，获得了一系列新的结果和认识。主要结论如下： 1. 研究揭示了近百年来胶州湾沉积速率具有区域与年际变化明显这一显著特点。通常，湾内的沉积速率较高，而湾口沉积速率变化很大，湾外沉积速率明显低于湾内和湾口；且随着年代的增加，胶州湾的沉积速率呈上升趋势，如1984年左右，B3站位的沉积速率高达1.17 cm/a，而之前仅为0.30 cm/a左右，主要是由于这一时期环胶州湾工农业迅速发展导致人为排入的物质的量增加的结果，但从2000年以来由于沿岸环境治理和污控措施的加强，这种境况已经有所改善，沉积速率有减小趋势。 2. 阐明了胶州湾沉积物氮、磷的生物地球化学特征及生态环境意义，沉积物中可交换态磷、铝磷、铁磷与有机磷在一定程度上表征了磷的生物可利用性部分，而铝磷、铁磷与闭蓄态磷可用于反映沉积物受污染的程度，沉积物中的有机氮（强氧化剂浸取态氮）作为其优势存在形态，可潜在参与水体氮的循环，参与的量与沉积物粒度密切相关，沉积物中的氮可粗略反映水体的生物量。研究显示，无机磷是胶州湾沉积物中磷的主要赋存形态，在湾内、湾口和湾外，分别占到沉积物总磷的44.57% ~ 94.41%(B3)、44.83 % ~ 95.54 % (D4)和55.09% ~ 95.20 % (D7)，铝磷、铁磷与闭蓄态磷与污染程度关系密切，可以作为沉积环境污染程度的指示因子。可交换态磷、铝磷、铁磷与有机磷等四种形态磷与浮游植物的数量和水体中磷酸盐的含量呈正相关，是胶州湾潜在的生物可利用磷。强氧化剂浸取态（SOEF-N，主要为有机氮）是沉积物可转化氮的优势形态，其含量分别为0.070 mg/g（B3）、0.069 mg/g（D4）和0.049 mg/g（D7），且随沉积物的粒度变细，其含量越高。沉积物中不同形态氮与水体中的硝酸盐、浮游植物数量和叶绿素a呈正相关，可粗略反映水体的生物量。 3. 通过系统研究胶州湾沉积物中重金属的地球化学特征，阐明了人为活动对其沉积环境的影响，提出了胶州湾沉积环境演变的“三段论”论点。胶州湾沉积物重金属的富集因子和地质累积指数的研究显示胶州湾沉积物的Cd、Pb和Cu是受人类活动影响较为严重的三种元素，并且重金属在沉积层序的分布特征说明重金属的污染在20世纪70、80年代开始加重，但在本世纪初，这种状况已经得到较大改善。胶州湾的环境演变过程可分为三个阶段，即1980年以前，1980年至2000年左右和2000年后。第一个阶段可以看作是胶州湾环境演变的一个背景值，该段时期内明显的特征是相对较低的沉积速率，较轻的重金属污染和富营养化状况；第二阶段是青岛地区工农业迅猛发展的阶段，加上治污措施和环境保护措施较少，这段时期胶州湾的环境一度恶化，是人类活动影响最为明显的一个阶段；第三个阶段是胶州湾环境质量不断改善的一个阶段，由于各项治污措施的实施，到本世纪初，胶州湾的环境质量较20世纪的最后20年里有了较大的改善。

南海北部陆坡区深水水道沉积体系研究

被动陆缘陆坡深水区因蕴藏大量的油气及天然气水合物资源而受到石油行业的关注。峡谷水道作为重力流沉积物从陆缘向陆坡盆区搬运的主要通道，是现今海洋科学研究的热点，是“由源到汇”研究的重要内容。峡谷水道可以作为粗粒沉积物的最终沉积场所，已被钻探证实可作为良好的油气储集体。本文选择陆坡水道为研究目标具有科学和实际意义。 本文借助1979年至2007年采集的2D（部分）、3D地震数据，参考部分钻井资料，以层序地层分析为基础，以多种地球物理属性为手段，以南海北部深水陆坡区为研究区，进行层序地层分析，并对陆坡水道的发育进行研究。层序特征分析发现琼东南南部陆坡具有不同于北部陆坡的物源供给模式，断陷期以北部华南地块和西南方向中南半岛为主要物源，也有部分来自西沙隆起的物源；拗陷期西南方向的中南半岛为主要物源区。 通过大量2D地震资料研究，本文首次系统地研究了发育在南海北部陆坡的大型水道，该水道起源于莺歌海盆地东部、横跨琼东南盆地、西沙海槽，终结于南海西北次海盆西部，我们把该水道命名为“琼东南中央水道”。琼东南中央水道长约570km，宽4－8km不等，发育在上新统地层中，该水道的产生与中新世以来红河对莺歌海盆地充足的物源供给，中新世末的海平面下降以及5Ma左右红河断裂带的反转诱发的滑塌有关。 基于新采集的3D地震资料和地球物理技术，本文首次在琼东南盆地南部陆坡深水区识别出深水水道，该期水道发育在更新统地层中，形态各异，有类似曲流河的曲流水道，也有典型的低弯曲侧向迁移水道。振幅特征显示该期水道主要以弱振幅细粒泥质充填为主，部分位置有强振充填反射，可能为粗粒充填。根据地震剖面和相干时间切片时空分析，认为该水道主要有3期侵蚀和3期充填过程。从展布特征来看，该期水道的形成与更新世（中）末次盛冰期海平面的下降，地震诱发中南半岛中部小型山脉河流的复苏对南海西部的供给有关。

东海内陆架泥质区EC2005孔沉积特征及古环境记录

本论文通过对东海内陆架浙闽沿岸泥质沉积带EC2005孔沉积物岩性、粒度、AMS14C测年、粘土矿物以及全岩矿物衍射分析、沉积物常微量元素和稀土元素分析、总碳氮以及有机碳氮分析、磁化率测试和综合研究，以EC2005孔岩芯记录为依据分析了研究区的沉积环境演化、海平面升降、浙闽沿岸流形成历史以及蕴含的古气候信息，探讨了陆源物质矿物、地球化学成分与粒度的关系。 EC2005孔岩芯自底部至41.00 m（17.3~13.1 ka BP）为末次冰消期以来的湖泊三角洲沉积序列，物质来源主要是来自湖盆流域物质的输入。随着海平面逐渐上升，海水自13.1 ka BP开始侵入研究区，自12.3 ka BP开始海水深度加大，沿岸流的地位开始显现，7.3 ka BP以来，形成了高海平面以来主要受沿岸流控制的浅海沉积。稀土元素结果显示，东海内陆架EC2005孔12.3~9.8 ka BP是以湖盆流域近源物质为主向长江物质为主转变的过渡阶段，自大约10~9.8 ka BP开始，由于海水深度的进一步加大、沿岸流作用进一步增强，长江物质对研究区的物质供给成为主导。海平面的升高以及沿岸流的形成是物质来源发生变化的重要原因。 东海内陆架泥质沉积物中全新世期间长达700 a（5.9~5.2 ka BP）的高分辨率细粒敏感组分资料揭示的东亚冬季风增强，与GRIP冰芯δ18O揭示的冷期具有良好的对应关系。5500 a BP前后东亚冬季风突然增强，与世界范围内的5500 a BP强降温事件非常一致。功率谱分析揭示出62 a和11 a的太阳活动周期以及与现代ENSO周期相似的6 a和5 a周期，因此，中全新世东亚冬季风演化可能是太阳活动以及古ENSO事件对全球气候系统的影响所致。 东海内陆架区对末次冰消期至早全新世气候回暖的记录与该时期世界性的广泛记录相一致，应该是轨道时间尺度上太阳辐射增强与ITCZ北移以及太阳活动变化综合影响的结果。东海内陆架浙-闽沿岸泥质带EC2005孔存在的4个百年时间尺度上快速沉积事件：12.3~12.1 ka BP、7.5~7.3 ka BP、5.9~5.2 ka BP和1.5~1.3 ka BP，与新仙女木事件、7.3 ka BP冷事件、第二新冰期（5.5 ka BP强降温事件）以及北大西洋1.4 ka BP浮冰事件均有良好的对应，世界范围内广泛存在的8.2 ka冷事件对本钻孔沉积也形成了一定影响。 EC2005孔磁化率变化受到多种因素的制约，如岩性粗细、早期成岩作用以及人类活动等的影响。近3.6 ka以来，磁化率的剧烈波动可能是由于人类活动影响造成的。东海内陆架EC2005孔TOC、TN和TOC/TN的大小主要受控于岩性变化。 此外，根据陆源物质粒度和矿物成分之间的关系，建立了陆源物质平均粒径与主要矿物成分含量大小的函数模型。地球化学成分与其所赋存单种矿物的相关性分析则进一步表明，陆源矿物种类和含量控制着地球化学成分及其含量，矿物种类和含量对地球化学成分的控制是决定性的，而粒度对元素（化学成分）的“控制”实际上是由于不同粒度的矿物组分不同而造成。

Forms and functions of inorganic carbon in the Jiaozhou Bay sediments

Inorganic carbon forms and their influencing factors, mutual transformation and contribution to carbon cycling in the Jiaozhou Bay sediments were discussed. The results show that inorganic carbon in sediments could be divided into five forms: NaCl form, NH3 center dot H2O form, NaOH form, NH2OH center dot HCl form and HCl form. Thereinto, NH2OH center dot HCl form and HCl form account for more than 70% of total inorganic carbon. There was close relationship among every form of inorganic carbon and their correlativity was clearly different with different sedimentary environment except the similar strong positive correlation among NH2OH center dot HCl form, HCl form and total inorganic carbon in all regions of the Jiaozhou Bay. All forms of inorganic carbon were influenced by organic carbon, pH, Eh, Es, nitrogen and phosphorus in sediments, but their influence had different characteristics in different regions. Every farm of inorganic carbon transformed into each other continuously during early diagenesis of sediments and the common phenomenon was that NaCl form, NH3 center dot H2O form, NaOH form and NH2OH center dot HCl form might transform into steady HCl form. NaCl form, NH3 center dot H2O form, NaOH form and NH2OH center dot HCl form could participate in carbon recycle and they are potential carbon source; HCl form may be buried for a long time in sediments, and it may be one of the final resting places of atmospheric CO2. Inorganic carbon which entered into sediments was about 4.98 x 10(10) g in the Jiaozhou Bay every year, in which about 1.47x10(10) g of inorganic carbon might be buried for a long time and about 3.51. x 10(10) g of inorganic carbon might return into seawater and take part in carbon recycling.

Carbon isotopic studies of individual lipids in organisms from the Nansha sea area, China

Carbon isotopes of individual lipids in typical organisms from the Nansha sea area were measured by the GC-IRMS analytical technique. delta(13)C values of saturated fatty acids in different organisms examined are from -25.6parts per thousand to -29.7parts per thousand with the average values ranging from -26.4parts per thousand to -28.2parts per thousand and the variance range of 11.8parts per thousand, between different organisms is also observed. Unsaturated fatty acids have heavy carbon isotopic compositions and the mean differences of 2.9%.9-6.8parts per thousand compared to the same carbon number saturated fatty acids. delta(13)C values of n-alkanes range from -27.5%o to -29.7parts per thousand and their mean values, ranging from -28.6parts per thousand, to -28.9parts per thousand, are very close in different organisms. The mean difference in delta(13)C between the saturated fatty acids and n-alkanes is only 1.5parts per thousand, indicating that they have similar biosynthetic pathways. The carbon isotopic variations between the different carbon-number lipids are mostly within +/-2.0parts per thousand, reflecting that they experienced a biosynthetic process of the carbon chain elongation. At the same time, the carbon isotopic genetic relationships between the biological and sedimentary lipids are established by comparative studies of carbon isotopic compositions of individual lipids in organisms and sediments from the Nansha sea area, which provides scientific basis for carbon isotopic applied research of individual lipids.

Distribution characteristics of matrix-bound phosphine along the coast of China and possible environmental controls

Matrix-bound phosphine (MBP) concentrations in surface sediments collected from 37 stations along the coast of China in 2006 are reported. MBP was found in all samples and the average concentration was 6.30 ng kg(-1) dry weight (dw). The distribution of MBP showed certain spatial variation characteristics with high MBP concentrations at stations near to the coast. The average concentrations of MBP in the northern Yellow Sea (NYS), the southern Yellow Sea (SYS), the northern area of East China Sea (NECS), the southern area of East China Sea (SECS), and South China Sea (SCS) were 5.57 +/- 3.78, 3.78 +/- 2.81, 5.27 +/- 3.07, 5.48 +/- 4.05 and 13.52 +/- 7.86 ng kg(-1) dw. respectively. The correlations between MBP and influencing factors, such as the sedimentary environmental characteristics (sediment type, the grain size, contents of phosphorous, organic matters and redox potential) and the aquatic environmental characteristics (temperature, salinity, depth and hydrodynamics) were studied. The results indicated that MBP was strongly influenced by various factors, such as total phosphorus (TP), organic phosphorus (OP), organic carbon (OC), the grain size and hydrodynamics, all of which not only offered reasonable interpretations for the distribution characteristics of MBP but also provided evidence to support the viewpoint that phosphine originated from OP decomposition. This work is the first comprehensive study of the distribution of MBP along the coast of China and its relationships with environmental factors which will lead to a better understanding of the phosphorus (P) biogeochemical cycle in the sea. (C) 2008 Elsevier Ltd. All rights reserved.

Seasonal and spatial distribution of matrix-bound phosphine and its relationship with the environment in the Changjiang River Estuary, China

Sediment is commonly considered as a source of phosphine, which is a highly toxic and reactive atmospheric trace gas. This study aims to investigate the seasonal and spatial distribution of matrix-bound phosphine (MBP) and its relationship with the environment in the Changjiang River Estuary. A total of 43 surface sediments were collected in four seasons of 2006, and concentrations of MBP and relative environmental factors were analyzed. MBP ranged from 1.93 to 94.86 ng kg(-1) dry weight (dw) with an average concentration of 17.14 ng kg(-1) dw. The concentrations of MBP in the tipper estuary were, higher than those in the lower estuary, which could be attributed to greater pollutant inputs in the upper estuary. The concentrations of MBP also varied with season, with November > August > May > February. Significant correlations existed between MBP and total phosphorus (TP), organic phosphorus (OP), inorganic phosphorus (W), organic carbon (OC), total nitrogen (TN), the grain size, and redox potential (Eh), suggesting that these sedimentary environmental characteristics played an important role in controlling the MBP levels in the sediments. Notably, there were positive linear relationships between the concentrations of soluble reactive phosphorus (SRP), TP, and chlorophyll a (Chl a) in bottom water and MBP in sediments. These relationships might be very complicated and need further exploration. This work is the first comprehensive study of the seasonal and spatial distribution of MBP in sediments and its relationships with environmental factors in a typical estuary, and will lead to deeper understanding of the phosphorus (P) biogeochemical cycle. (C) 2008 Elsevier Ltd. All rights reserved.

Geochemieal records of phosphorus in Jiaozhou Bay sediments - Implications for environmental changes in recent hundred years

Phosphorus is a key element and plays an important role in global biogeochemical cycles. The evolution of sedimentary environment is also influenced by phosphorus concentrations and fractions as well as phosphate sorption characteristics of the marine sediments. The geochemical characteristics of phosphorus and their environmental records were presented in Jiaozhou Bay sediments. Profiles of different forms of phosphorus were measured as well as the roles and vertical distributions of phosphorus forms in response to sedimentary environment changes were investigated. The results showed that inorganic phosphorus ( IP) was the major fraction of total phosphorus ( TP); phosphorus which is bound to calcium, iron and occluded phosphorus, as well as the exchangeable phosphorus were the main forms of IP, especially calcium-phosphorus, including detrital carbonate-bound phosphorus ( Det - P) and authigenic apatite-bound phosphorus ( ACa - P), are the uppermost constituent of IP in Jiaozhou Bay sediments. Moreover, the lead-210 chronology technology was employed to estimate how much phosphorus was buried ultimately in sediments. And the research showed that the impacts of human activities have increased remarkably in recent years especially between the 1980s and 2000. According to research, the development of Jiaozhou Bay environment in the past hundred years can be divided into three stages; (I) before the 1980s characterized by the relatively low sedimentation rate, weak land-derived phosphorus inputs and low anthropogenic impacts; (2) from the 1980s to around 2000, accelerating in the 1990s, during which high sedimentation rates, high phosphorus abundance and burial fluxes due to the severe: human activities impacted on the whole environmental system; (3) after 2000, the period of the improvement of environment, the whole system has been improved including the decreasing sedimentation rates, concentration and the burial fluxes of phosphonas.

黄骅坳陷港西开发区河流相储层构型与剩余油分布模式研究

In the production tail of oilfield, water-cut is very high in thick channel sand oil reservoir, but recovery efficiency is relative low, and recoverable remaining oil reserves is more abundant, so these reserves is potential target of additional development. The remaining oil generally distributed with accumulation in certain areas, controlled by the reservoir architecture that mainly is the lateral accretion shale beddings in the point bar, so the study of reservoir architecture and the remaining oil distribution patterns controlled by architecture are very significant. In this paper, taking the Minghuazhen formation of Gangxi oilfield as a case, using the method of hierarchy analysis, pattern fitting and multidimensional interaction, the architecture of the meandering river reservoir is precisely anatomized, and the remaining oil distribution patterns controlled by the different hierarchy architecture are summarized, which will help to guide the additional development of oil fields. Not only is the study significant to the remaining oil forecasting, but also it is important for the theory development of reservoir geology. With the knowledge of sequence correlation and fluvial correlation model, taking many factors into account, such as combination of well and seismic data, hierarchical controlling, sedimentary facies restraint, performance verification and 3-D closure, an accurate sequence frame of the study area was established. On the basis of high-resolution stratigraphic correlation, single layer and oil sand body are correlated within this frame, and four architecture hierarchies, composite channel, single channels, point bars and lateral accretion sandbody are identified, The result indicates that Minghuazhen Formation of Gangxi oilfield are dominated by meandering river deposition, including two types of channel sandbodies, narrow band and wide band channel sandbody, and each of them has different characteristics of facies variation laterally. Based on the identification of composite channel, according to the spatial combination patterns and identified signs of single channel, combined with channel sandbody distribution and tracer material data, single channel sandbodies are identified. According to empirical formula, point-bar scales of the study area are predicted, and three identification signs are summarized, that is, positive rhythm in depositional sequence, the maximum thick sand and near close to the abandoned channel, and point bars are identified. On the basis of point bar recognition, quantitative architecture models inner point bar are ascertained, taking the lateral accretion sand body and lateral accretion shale beddings in single well as foundation, and quantitative architecture models inner point bar as guidance, and result of tracer material data as controlling, the the lateral accretion sand body and lateral accretion shale beddings are forecasted interwell, so inner architecture of point bar is anatomied. 3-D structural model, 3-D facies model and 3-D petrophysical properties models are set up, spatial distribution characteristics of sedimentary facies and petrophysical properties is reappeared. On the basis of reservoir architecture analysis and performance production data, remaining oil distribution patterns controlled by different hierarchy architecture units, stacked channel, single channel and inner architecture of point bar, are summarized, which will help to guide the additional development of oil fields.

鄂尔多斯盆地上古生界低渗透砂岩有效储层识别与预测

Sulige Gasfield, with a basically proven reserve as high as one trillion cubic meters, is one giant gas field discovered in China. The major gas -bearing layers are Upper Paleozoic strata with fluvial-lacustrine sedimentary facies. Generally, gas reservoirs in this field are characteristic by "five low" properties, namely low porosity, low permeability, low formation pressure, low productivity and low gas abundance. Reservoirs in this field also feature in a large distribution area, thin single sandbody thickness, poor reservoir physical properties, thin effective reservoir thickness, sharp horizontal and/or vertical changes in reservoir properties as well as poor connectivity between different reservoirs. Although outstanding achievements have been acquired in this field, there are still several problems in the evaluation and development of the reservoirs, such as: the relation between seismic attributes and reservoir property parameters is not exclusive, which yields more than one solution in using seismic attributes to predict reservoir parameters; the wave impedance distribution ranges of sandstone and mudstone are overlapped, means it is impossible to distinguish them through the application of post-stack impedance inversion; studies on seismic petrophysics, reservoir geophysical properties, wave reflection models and AVO features have a poor foundation, makes it difficult to recognize the specific differences between tight sandstone and gas-bearing sandstone and their distribution laws. These are the main reasons causing the low well drilling success rate and poor economic returns, which usually result in ineffective development and utilization of the field. Therefore, it is of great importance to perform studies on identification and prediction of effective reservoirs in low permeable sandstone strata. Taking the 2D and 3D multiwave-multicomponent seismic exploration block in Su6-Su5 area of Sulige field as a study area and He 8 member as target bed, analysis of the target bed sedimentary characteristics and logging data properties are performed, while criteria to identify effective reservoirs are determined. Then, techniques and technologies such as pre-stack seismic information (AVO, elastic impedance, wave-let absorption attenuation) and Gamma inversion, reservoir litological and geophysical properties prediction are used to increase the precision in identifying and predicting effective reservoirs; while P-wave and S-wave impedance, ratio of P/S wave velocities, rock elastic parameters and elastic impedance are used to perform sandstone gas-bearing property identification and gas reservoir thickness prediction. Innovative achievements are summarized as follows: 1. The study of this thesis is the first time that multiwave-multicomponent seismic data are used to identify and predict non-marine classic reservoirs in China. Through the application of multiwave-multicomponents seismic data and integration of both pre-stack and post-stack seismic data, a set of workflows and methods to perform high-precision prediction of effective reservoirs in low permeable sandstone is established systematically. 2. Four key techniques to perform effective reservoir prediction including AVO analysis, pre-stack elastic wave impedance inversion, elastic parameters inversion, and absorption attenuation analysis are developed, utilizing pre-stack seismic data to the utmost and increasing the correct rate for effective reservoir prediction to 83% from the former 67% with routine methods. 3. This thesis summarizes techniques and technologies used in the identification reservoir gas-bearing properties using multiwave-multicomponent seismic data. And for the first time, quantitative analysis on reservoir fluids such as oil, gas, and/or water are carried out, and characteristic lithology prediction techniques through the integration of pre-stack and post-stack seismic prediction techniques, common seismic inversion and rock elastic parameters inversion, as well as P-wave inversion and converted wave inversion is put forward, further increasing the correct rate of effective reservoir prediction in this area to 90%. 4. Ten seismic attribute parameters are selected in the 3D multi-wave area to perform a comprehensive evaluation on effective reservoirs using weighted-factor method. The results show that the first class effective reservoir covers an area of 10.08% of the study area, while the second and the third class reservoirs take 43.8% and 46% respectively, sharply increasing the success rate for appraisal and development wells.

黄骅坳陷马东地区沙河街组重力流水道储层评价及剩余油研究

In this paper, taking Madong district of Huanghua depression as a case, based on the theory of sequence stratigraphy, sedimentology, reservoir geology and geophysics, according to core analysis, seismic attribute analysis, logging constrained inversion, multi-data correlation of strata, reservoir modeling, etc. the lower and middle first member of Shahejie formation of the study area was forecasted and evaluated. As a result, a number of reservoir prediction and remaining oil distribution methods suitable to oil exploitation of gravity flow channel reservoir are presented. Scientific foundation is provided to the next adjustment of development program and exploitation of the remaining oil. According to high resolution sequence stratigraphy theory, precise stratigraphic framework was founded, the facies types and facies distribution were studied under the control of stratigraphic framework, the technologies of seismic attribute abstraction and logging constrained inversion. Result shows that gravity flow channel, as the main facies, developed in the rising period of base-level cycle, and it was formed during the phase of contemporaneous fault growth. As the channel extends, channel width was gradually widened but thickness thined. The single channels were in possession of a great variety of integrated modes, such as isolated, branching off, merging and paralleling, forming a kind of sand-mud interblending complex sedimentary units. Reservoir quality differs greatly in vertical and horizontal direction, and sedimentary microfacies is main controlling factor of the reservoir quality. In major channel, deposition thickness is great, and petrophysical property is well. While in marginal channel, reservoir is thinner, and petrophysical property is unfavorable. Structure and reservoir quality are main factors which control the oil and gas distribution in the study area. On the basis of the research about the reservoir quality, internal, planar and 3-D reservoir heterogeneities are characterized, and the reservoir quality was sorted rationally. At last, based on the research of reservoir numerical simulation of key well group, combined with reservoir performance analysis and geological analysis above, remaining oil distribution patterns controlled by internal rhythm of gravity flow channel were set up. Through this research, a facies-restrained reservoir prediction method integrating multi-information was presented, and potential orientation of remaining oil distribution in gravity flow channel reservoir is clarified.

柴达木盆地西区新生代构造演化

The Qaidam Basin constitutes a major portion of the northeastern Tibetan Plateau, and an understanding of its tectonic development will help decipher how the Tibetan Plateau was formed. It is shown that Late Cretaceous–Paleocene deposits of the western Qaidam Basin can be well correlated with their counterparts of the southwestern Tarim Basin, implying that the two regions were originally connected or were in the same depositional basin during that period of time. The Qaidam Basin commenced subsiding due to crustal shortening in the Eocene, and it has subsequently evolved into an independent basin since the Miocene. The main depocenter was noticeably persistent in the middle of the western Qaidam Basin from Eocene to Miocene time, and then it shifted to the east. On the basis of spatial stratigraphic correlation and restoration of sedimentary processes, we surmise that there existed a proto–Qaidam Basin during the Paleogene, where the Suhai and Kumukol Basins represent its northern and southern margins, respectively. The Suhai and Kumukol Basins were subsequently isolated from the Qaidam Basin as a result of basinward thrusting in basin-margin areas. It is shown that the western Qaidam Basin experienced three distinct stages: the first stage was characterized by a simple synclinal depression; the second stage was marked by occurrence of reverse faults at inflection points of the megafold and continuous subsidence in the middle of the basin; and the third stage featured intrabasinal deformation and uplift. The eastern Qaidam Basin underwent a diverse evolution and became the main depositional area in the Quaternary. It is suggested that the Qaidam Basin should be generated as a result of crustal buckling or folding, manifesting itself as a synclinal depression. The crustal folding model can account for a number of observations, including localization of the depocenter in the middle of the basin, nearly concomitant deformation on the south and north sides of the Qaidam Basin, occurrence of major high-angle reverse faults at basin margins, and generation of adjacent intermontane Suhai and Kumukol Basins. A tectonic model is accordingly advanced to illustrate Cenozoic tectonics of the Qaidam Basin.

地震岩性与物性联合反演技术研究和应用

This paper studies how to more effectively invert seismic data and predict reservoir under complicated sedimentary environment, complex rock physical relationships and fewer drills in offshore areas of China. Based on rock physical and seismic amplitude-preserving process, and according to depositional system and laws of hydrocarbon reservoir, in the light of feature of seismic inversion methods present applied, series methods were studied. A joint inversion technology for complex geological condition had been presented, at the same time the process and method system for reservoir prediction had been established. This method consists four key parts. 1)We presented the new conception called generalized wave impedance, established corresponding inversion process, and provided technical means for joint inversion lithology and petrophysical on complex geological condition. 2)At the aspect of high-resolution nonlinear seismic wave impedance joint inversion, this method used a multistage nonlinear seismic convolution model rather than conventional primary structure Robinson seismic convolution model, and used Caianiello neural network implement inversion. Based on the definition of multistage positive and negative wavelet, it adopted both deterministic and statistical physical mechanism, direct inversion and indirect inversion. It integrated geological knowledge, rock physical theory, well data, and seismic data, and improved the resolution and anti-noise ability of wave impedence inversion. 3)At the aspect of high-resolution nonlinear reservoir physical property joint inversion, this method used nonlinear rock physical model which introduced convolution model into the relationship between wave impedance and porosity/clay. Through multistage decomposition, it handles separately the large- and small-scale components of the impedance-porosity/clay relationships to achieve more accurate rock physical relationships. By means of bidirectional edge detection with wavelets, it uses the Caianiello neural network to finish statistical inversion with combined applications of model-based and deconvolution-based methods. The resulted joint inversion scheme can integrate seismic data, well data, rock physical theory, and geological knowledge for estimation of high-resolution petrophysical parameters. 4)At the aspect of risk assessment of lateral reservoir prediction, this method integrated the seismic lithology identification, petrophysical prediction, multi-scale decomposition of petrophysical parameters, P- and H-spectra, and the match relationship of data got from seismics, well logging and geology. It could describe the complexity of medium preferably. Through applications of the joint inversion of seismic data for lithologic and petrophysical parameters in several selected target areas, the resulted high-resolution lithologic and petrophysical sections(impedance, porosity, clay) show that the joint inversion can significantly improve the spatial description of reservoirs in data sets involving complex deposits. It proved the validity and practicality of this method adequately.

南海大陆边缘地壳结构与盆地形成机制--以珠江口－琼东南盆地为例

South China Sea is located in the convergence of Eurasian plate, the Pacific Ocean plate and Indian Ocean-Australia plate. The total area is about 3,500,000 km2, the geologic structure is complicated, and the structure line cut off reciprocal is the marginal sea taking form by that the seafloor spreads during the middle Oligocene. South China Sea continental margin have developed more than 10 large oil-gas bearing basins and a number of medium-small sized basins. These basins contain abundant mineral resources such as oil & gas. The marginal deepwater area in the north part of South China Sea has become our country’s strategic energy prospecting frontier. The deepwater area of Zhujiangkou and Qiongdongnan basins is the research target in this thesis. The thesis studied deep structure and the earth dynamics of the north part of South China Sea margin, and these researches provide scientific basis for oil-gas resources strategic investigation and valuation in deepwater sea area of north part slope of South China Sea. In order to develop the research of rebuilding velocities and density architecture of earth shell in region of interest, in marginal deepwater area in the north part of South China, we adopted 14 long-cable seismic reflection profile data of 3556.41 kilometers in total, the gravity measurement data along profiles (3851.44 kilometers in total), the magnetic observation along profiles (3838.4 kilometers in total) and depth measurement along profile, the logging data of 11 wells in project, the interpreted fault parameter and preexisting geologic and geophysical research achievement. This thesis has carried out concretely studying research as follows: 1. Overlay-velocity data sampling and analysis, interval velocity calculation, time-depth conversion, model building of earth shell velocity and layering character of earth shell are studied on 14 deep sections. Velocity structure in region of interest has revealed: Changchang is the sag with thinnest crust in Qiongdongnan basin; the sedimentary thickness lowers gradually from north to south, and the thickness change from west to east is milder. The sags’ sedimentary velocities in Qiongdongnan basin have obvious demarcation. The velocity of the 8000 meters sedimentary rocks is 4700 m/s in Shunde sag and Baiyun sag, and is the lowest; at that depth, the velocity very different in Liwan sag and Baiyun sag, which is about 800m/s. 2. Extracting gravity data and building of initial crust density model along the section; With Bouguer gravity anomaly data as constraint, revising density distributes of initial model, and building the crust density model. 3. With crust velocity and density as constraint, correcting the effect of thermobaric field and constructing constitution structure of rock in region of interest. By this research, we known that rocks in Zhujiangkou upper crustal layer are chiefly granite-gneiss, quartzite, granodiorite and basalt, however, rocks in Qiongdongnan basin upper earth shell are chiefly composed of granite-gneiss, quartzite, granodiorite, diorite and basalt. 4. Synthetically crust velocity and density structure, gaining expanding factor on crust and entire crust along section. The result is indicated: the expanding factor in every sag rises from northwest to southeast, which have reflected thinning characteristic of crust from continent to ocean. Intra-crustal deformation degree in Changchang and Ledong-Lingshui sag is bigger than that in Songnan-Baodao sag. Entire crust extension factor in Changchang and Songnan-Baodao sag is greater than that in Ledong-Lingshui sag, which can make an explanation of frequently event and longer heating process in middle-east of Qiongdongnan basin. 5. Synthesize multidisciplinary information to discuss the earth dynamics significance of discordogenic seismic profile in deepwater area of Zhujiangkou and Qiongdongnan basins.