镍催聚1,4-聚丁二烯橡胶的e_y,[Z]和f值与其内在的相关性

比较稀土催聚1，4—聚丁二烯橡胶和几种不同温度下聚合的镍催聚1，4—聚丁二烯橡胶的σｙ 和［η］，从中得知链缠结的变化是影响σｙ 和［η］以及 τ的主要原因，而微观结构的变化可能是影响链缠结的因素之一，1，4—聚丁二烯橡胶的加工性能与链缠结有关。

Compatibilizing effect of polystyrene-block-poly(4-vinylpyridine) for poly(2,6-dimethyl-1,4-phenyleneoxide) chlorinated polyethylene blends

The compatibilizing effect and mechanism of compatibilization of the diblock copolymer polystyrene-block-poly(4-vinylpyridine) P(S-b-4VPy) on immiscible blends of poly(2,6-dimethyl-1,4-phenylene oxide) (PPO)/chlorinated polyethylene (CPE) were studied by means of scanning electron microscopy (SEM), differential scanning calorimetry (DSC), mechanical properties and FTIR measurements. The block copolymer was synthesized by sequential anionic polymerization and melt-blended with PPO and CPE. The results show that the P(S-b-4VPy) added acts as an effective compatibilizer, located at the interface between the PPO and the CPE phase, reducing the interfacial tension, and improving the interfacial adhesion. The tensile strength and modulus of all blends increase with P(S-b-4VPy) content, whereas the elongation at break increases for PPO-rich blends, but decreases for CPE-rich blends. The polystyrene block of the diblock copolymer is compatible with PPO, and the poly(4-vinylpyridine) block and CPE are partially miscible.

异丙基膦酸单(1-已基-4-乙基)辛酯的某些基本常数的测定

用两相滴定法测定异丙基膦酸单(1-己基-4-乙基)辛酯(PT-2,HL)在水中的溶解度S，在水中的解离常数K在水-正庚烷中的分配常数Kd及二聚常数K2，利用SOLWR计算程序，简单快速地处理两相滴定数据，得到结果为：S=3.68×10-5mol/L，pKa=5.49，logK2=4.67，logKd=2.67(25±0.5℃)

1,4-二羟蒽醌红外光谱的振动分析

测量了１，４－二羟基蒽醌及其氘代物的红外光谱，用ＮＲＣＣ程序进行了振动分析。由于同时考虑了分子内与分子间的氢键，统一处理面内与面外振动，计算结果优于文献报道，并纠正了一些错误归属。

高效离心分配色谱仪对异丙基膦酸单(1-己基-4-乙基)-辛酯-稀土萃取体系的研究

首次用高效离心分配色谱仪（ＨＰＣＰＣ）研究用异丙基膦酸单（１－己基－４－已基）辛酯（ＰＴ－２）分离三价重稀土元素，以分离 Ｙｂ（Ⅲ）， Ｅｒ（Ⅲ）及 Ｌｕ（Ⅲ）为例，考察了流动相酸度、流速、固定相浓度、ＨＰＣＰＣ的转速等因素对ＨＰＣＰＣ分离稀土效果的影响，并用ＨＰＣＰＣ法和液－液萃取法研究了ＰＴ－２萃取重稀土的机理。

异丙基膦酸单(1-己基-4-乙基)辛酯萃淋树脂吸萃重稀土元素(Ⅲ)

本文研究了异丙基膦酸单（１－己基－４－乙基）辛酯萃淋树脂在盐酸介质中对重稀土元素（Ⅲ）的吸萃平衡，考察了平衡水相酸度对吸附反应的影响，计算了重稀土（Ⅲ）间的平均分离系数，确定了吸附反应的Ｆｒｅｕｄｌｉｃｈ等温吸附方程。该树脂吸附Ｙｂ（Ⅲ）的静态饱和容量为６６．５ｍｇＹｂ／（ｇ．Ｒ），饱和萃合物的ＩＲ谱表明ＰＴ－２萃淋树脂吸附Ｙｂ（Ⅲ）的反应为阳离子交换反应。

异丙基膦酸单(1-己基-4-乙基)辛酯上胺205-正庚烷乳状液膜分离钪(Ⅲ)、铁(Ⅲ)、镥(Ⅲ)

本文研究了异丙基膦酸单（１－己基－４－乙基）辛酯（简称ＰＴ－２）上胺２０５－正庚烷乳状液膜分离钪（Ⅲ），铁（Ⅲ），镥（Ⅲ）及外相酸度、表面活性剂浓度、流动载体浓度和内相酸度对Ｓｃ（Ⅲ）、Ｆｅ（Ⅲ）、Ｌｕ（Ⅲ）迁移影响。实验结果表明，在一定的条件下Ｓｃ（Ⅲ）有可能实现与Ｆｅ（Ⅲ）、Ｌｕ（Ⅲ）的分离。

1,4-二丙氧基-2,3-二氰基萘的合成

以1，4－萘醌为原料，经溴化、氰化、烷基化合成了1，4－二丙氧基－2，3－二氰基萘，用SiemensP4四圆衍射仪测得了晶体结构。合成方法简便，反应时间短，产率高。

1,4-二丙氧基-2,3二氰基萘的晶体结构

用 Siemens P4四圆衍射仪,测得了1,4-二丙氧基-2,3-二氰基萘的晶体结构。晶体属单斜晶系,空间群为 C2/C。晶格参数 a=14.987(3)A,b=10.527(2),c=11.755(2),β=118.98°(3),晶胞体积 V=1622.4(6)3,Z=4,Dc=1.205Kg/m~3,μ(MoK_α)=0.079mm~(-1),F(000)=624,T=293(2)K_o晶体结构应用直接法,解出最后的偏离因子 R=0.0554[1425个Ⅰ≥2σ(Ⅰ)衍射点]。结构分析表明,萘环的1,4和2,3位碳原子上的氢原子分别被丙氧基和氰基所取代,由于取代基的引入使萘环的结构有所改变。

Comparative study on polyimides from 3,3'- and 4,4'-linked diphthalic anhydride

1,4-Bis(2,3-dicarboxyphenoxy)benzene dianhydride, 1,4-bis (3,4-dicarboxyphenoxy)benzene dianhydride, bis(2,3-dicarboxyphenoxy) sulfide dianhydride, bis (3,4-dicarboxyphenoxy)sulfide dianhydride, and 2,3,3',4'-tetracarboxy diphenyl sulfide dianhydride were synthesized from 3-chlorophthalic anhydride and 4-chlorophthalic anhydride. Bis(2,3-dicarboxyphenyl)sulfone and bis(3,4-dicarboxyphenyl) sulfone were obtained by the oxidation of the corresponding bis(dicarboxyphenyl)sulfide by hydrogen peroxide. The polyimides from the dianhydrides mentioned above and 4,4'-oxydianiline were prepared. The properties, such as dynamic mechanical behavior, thermooxidative stability, stress-strain behavior, chemical resistance, and permeability to some gases have been in investigated for the isomeric polyimides. (C) 1996 John Wiley & Sons, Inc.

A new thermoplastic polyimide composite based on 1,4-(3,4-dicarboxyphenoxyl)benzene/4,4'-methylene dianiline

New thermoplastic polyimide (PEI) composites based on 1,4-(3,4-discarboxyphenoxyl)benzene/4,4'- methylene dianiline have been fabricated by the approach of polymerization by the approach of polymerization of monomer reactants (PMR). The chemical and physical behavior of the resin during processing are determined by infrared spectroscopy and rheology. The influence of processing conditions on the composite properties is investigated. The processing, physical and mechanical properties of the composites reinforced with different fibers are presented.

DICHLORO(ETA(5)-CYCLOPENTADIENYL)([1-(4-METHOXYPHENYL)CYCLOHEXYL]-ETA(5)-CYCLOPENTADIENYL)TITANIUM(IV)

The title molecule, [TiCl2(C5H5)(C18H21O)], has a pseudotetrahedral bent metallocene structure in which the cyclopentadienyl ring is symmetrically bonded to Ti [range of Ti-C distances 2.36(1)-2.41(1)Angstrom], but the substituted cyclopentadienyl ring adopts asymmetrical bonding [Ti-C 2.33(1)-2.48(1)Angstrom] due to the interaction of the large substituent with the Cl(2) atom. The angle C(11)-C(1)-C(21) is 111.1(8)degrees with the large substituent occupying a cis position with respect to the substituted ring.

裂解色谱法测定环化顺1,4聚丁二烯的环化度

用裂解色谱法(PGC)研究了不同环化度的环化顺1,4聚丁二烯(CPBd)。建立了测定CPBd环化度的方法。分析了不同实验条件下生成的CPBd的环化度,结果与NMR测定值一致。

异丙基磷酸单(1-已基-4-乙基)辛酯萃取分离锆、钍、钛、铁、镥及其机理

本文通过异丙基膦酸单(1-己基-4-乙基)辛酯在硫酸介质中对Zr~(4+)、Th~(4+)、Ti~(4+)、Fe~(3+)、Lu~(3-)的萃取平衡研究,探讨了Zr~(4-)与其它离子分离的可能性,提出了萃取Zr~(4-)的三种反应机理,并计算了萃取反应平衡常数和热力学函数.

La_(n+1)Ni_nO_(3n+1)(n=1～4)复合氧化物的制备、表征和催化性能的研究

合成了(AO)(ABO_3)_n(A=La,B=Ni,n=l～4)型系列复合氧化物.用XRD,XPS,IR,TPD,TPR等方法对其进行了表征,研究了结构特征,氧化一还原性能.用化学分析方法测定了镍的价态及氧缺陷.考察了该系列复合氧化物对CO,CH_4的完全氧化活性,并对其活性与化学组成及结构间的关系进行了讨论.