Analysis of structural relaxation in a Li(2)O2SiO(2) glass using rate heating approach

The structural relaxation process of an inorganic glass (Li(2)O2SiO(2)) at different cooling rates has been studied by differential scanning calorimetry. A four-parameter model-Tool-Narayanaswamy-Moynihan (TNM) model was applied to simulate the normalized specific heat curve measured. Four parameters, Delta h*/R, beta, In A, and x were obtained and compared with the values obtained from the isothermal approach. (C) 1999 Kluwer Academic Publishers.

Eu~(2+)激活的Li-β-Al_2O_3的组成、结构和发光

运用周期表对角线规则，获得了Eu2+激活的Li-β-Al2O3新的发光基质，研究了该基质的组成、结构、电荷补偿机制及Eu2+在体系中的发光性能结果表明：锂对BaMgAl10O17基质中镁的取代仍然保持β-Al2O3结构不变，Li-β-Al2O3基质中的电荷补偿主要是形成间隙Al3+或Li+离子机制，Eu2+激活的Li-β-Al2O3具有良好的发光性能，通过进一步研究有可能应用到三基色发光材料中去

A phenomenological study of the structural relaxation of an inorganic glass (Li(2)O2SiO(2))

The structural relaxation process of an inorganic glass (Li(2)O2SiO(2)) has been studied by differential scanning calorimetry. The sample is subjected to different thermal ageing histories with isothermal stages at an ageing temperature of T-g - 30 degrees C for different ageing times and at an ageing time of 16 h for different ageing temperatures. A four-parameter Tool-Narayanaswamy-Moynihan (TNM) model, is applied to simulate the normalized specific-heat curves measured. The ageing-temperature and ageing-time dependence of the structural relaxation parameters in the TNM model is obtained. (C) 1998 Elsevier Science S.A. All rights reserved.

The role of Li-O bonds in calculations of nonlinear optical coefficients of LiXO3-type complex crystals

The second-order nonlinear optical (NLO) tenser coefficients of LiXO3 (X = I; Nb or Ta) type complex crystals have been calculated using the chemical bond theory of complex crystals. Contributions of each type of bond to the total second-order NLO coefficient d(ij) and the linear susceptibility X are quantitatively determined. All tensor values thus calculated are in good agreement with experimental data. The Li-O bonds are found to be an important group in the contributions to the total NLO tenser coefficient, especially for those in LiNbO3 and LiTaO3. The importance of Li-O bonds depends on the environment of Li atom in these crystals.

Extraction and separation of heavy rare earth (III) with Extraction Resin containing di(2,4,4-trimethyl pentyl) phosphinic acid (Cyanex 272)

Extraction resins, of the type of;levextrel, (which is a collective term for styrene/divinylbenzene based copolymers of predominantly macroporous structure that contain a selective extractant) are important for the recovery and separation of metal ions, as they combine features of solvent extraction and ion exchange resins. This paper presents the results of the adsorption of heavy rare earth ions (Ho(III), Er(III), Tm(III), Yb(III), Lu(III) and Y(III)) from hydrochloric acid solutions at 0.2 mol/L ionic strength and 50 degrees C by the extraction resin containing di (2,4,4-trimethyl pentyl) phosphinic acid (Cyanex 272) and the chromatographic separation of (Er(III), Tm(III) and Yb(III)). Technological separation products, with purity and yield of Tm2O3 >99.97%, >80%, Er2O3 >99.9%, >94% and Yb2O3 >99.8%, >80% respectively, have been obtained from a feed having the composition Tm2O3 60%, Er2O3 10%, and Yb2O3 3%, the others 27%. The distribution coefficients, extraction equilibrium constants and separation factors have been determined as a function of acidity, loading of the resin and rare earths, flow rates and column ratios. The resolutions and efficiencies of separation of Er/Tm/Yb each other have been calculated. The stoichiometry of the extraction of rare earth ions has been suggested as well.

Al-Li-Ymm合金的组织和腐蚀性能

对Al-3.1Li及Al-2.7Li-0.21Ymm二种合金的铸态及在540℃条件下固溶处理４小时后的组织进行了观察和分析，测定了二种合金在3.5%NaCl水溶液中的电化学腐蚀性能。结果表明：二种合金的宏观组织未见明显示差别，含Ymm的合金微观组织较细化，添加少量Ymm对合金的腐蚀性能有较好的影响，固熔处理后的合金耐腐性能提高

甲烷氧化偶联Ti-La-Li系多元氧化物催化剂的表面碱性和表面活性氧种

利用CO2-TPD方法考察了Ti-La-Li系多元氧化物催化剂的表面碱性,实验发现:C2 选择性与表面碱强度呈顺变关系,而CH4 转化率与CO2 的脱附峰面积呈顺变关系.同时,利用XPS,O2-TPD等方法对该体系催化剂的表面活性氧种进行了表征与研究,结果表明:催化剂的表面晶格氧与C2 选择性有关,表面吸附氧与甲烷转化(包括偶联和深度氧化)有关.O2 -TPD实验发现催化剂的表面存在三种氧:α( 100℃≤t≤450℃),β(450℃

TRIS(TERT-BUTYLCYCLOPENTADIENYL)NEODYMIUM-MU-CHLORO-TRIS(TETRAHYDROFURAN)LITHIUM, [ND(ETA(5)-(T)BUCP)3(MU-CL)LI(THF)3]

The title complex, tris[2(eta5)-tert-butylcyclopentadi-enyl]-mu-chloro-1:2kappa2Cl-tris(tetrahydrofuran-1kappaO)lithiumneodymium, [Nd(C9H13)3(mu-Cl)Li(C4H8O)3], consists of the neutral moiety ((t)BuCp)3Nd linked to the cation [Li(thf)3]+ by a mu-Cl bridge

SYNTHESIS AND CRYSTAL-STRUCTURE OF [LI(THF)4][((T)BUCP)YB(NPH2)3]

The title complex [Li(THF)4] [(tBuCp)Yb(NPh2)3] was synthesized by the reaction of t-butylcyclopentadienyl ytterbium dichloride with 2 equivalents of LiNPh2 in THF, hexane, and toluene at -78-degrees-C. The complex was characterized by elemental analysis,

Study of Methane Oxidative Coupling over Ti-La-Li Mixed Oxides

The composition and structures of Li-Ti-La mixed oxides as well as their catalytic activity for methane oxidative coupling have been studied by means of XRD XPS, IR, SEM and so on. The results indicate that by changing x value in Li-La1-xTixO2 oxides phas

甲烷氧化偶联Ti-La-Li系混合氧化物催化剂

研究了Ti-La-Li三元氧化物的组成、结构及其对甲烷氧化偶联反应的催化性能；用XRD、IR、XPS和SEM等方法对催化剂进行表征，结果表明：在Li-TixLa1-xO2系列催化剂中，随x值的不同，可生成LaTi1－yLiyO3-λ、、Li2TiO3、La0．66TiO2．993、La2O3和Li1.33Ti1.66O4几种物相，其中，钙钛矿到三元复合氧化物LaTi1-yLiyO3-λ是甲烷氧化偶联反应的主要活性相，活性位Li＋-O－-Ti3＋的形成是活性提高的主要原因．Li2TiO3和La0．66TiO2.993是深度氧化活性相，而Li1.33Ti1．66O4既无偶联活性，也无深度氧化活性.

［Li（THF）_4］［（t－BuCp）Yb（NPh_2）_3］的合成及晶体结

合成了标题配合物［Ｌｉ（ＴＨＦ）＿４］［ｔ－ＢｕＣｐ）Ｙｂ（ＮＰｈ＿２）＿３］，经元素分析、红外光谱表征，并测定了其晶体结构。配合物属正交晶系，Ｐｂｃａ空间群，晶体学参数ａ＝１．４５１５（５），ｂ＝２．２８３３（５），ｃ＝３．３５５４（６）ｎｍ；Ｖ＝１１．１２０９（５）ｎｍ￣３；Ｄ＿ｃ＝１．３１ｇ·ｃｍ￣＿（－３）；Ｆ（０００）＝４４．２３，Ｚ＝８。最后一致性因子Ｒ＝０．０４７，Ｒ＿ｗ＝０．０４５，平均Ｙｂ－Ｎ键长是０．２２６４（９）ｎｍ。

配合物[Li(DME)_3][(t-BuCp)_2Nd(NPh_2)_2]·(1/2)DME的合成及晶体结构

1990年,Schumann,H.等报道了用双(环戊=烯基)稀土甲基化物与二苯胺进行交换反应制得了[Li(THF)_4][Cp_2Sm(NPh_2)_2],并测定了相应配合物镥的结构。但是,到目前为止,类似的轻稀土配合物尚未报道。这里,我们以双(叔丁基环戊二烯基)氯化钛为前体,与等当量的二苯胺基锂反应,制得了阴离子型配合物[Li(DME)_3][(t—BUCP)_2Nd(NPh_2)_2]·1/2DME,并测定了其单晶结构。

〔Li（DME）_3〕〔（η~5－MeCp）Nd（t－Bu）_3〕的合成及其对

将ＭｅＣｐＮｄＣｌ２·２ＬｉＣ１·ｎＴＨＦ和２摩尔ｔ－ＢｕＬｉ于四氢呋喃和戊烷混合溶剂中反应，合成得到一种新的阴离子型配合物〔Ｌｉ（ＤＭＥ）３〕〔（η５－ＭｅＣｐ）Ｎｄ（ｔ－Ｂｕ）３〕，用元素分析，红外光谱等作了表征，配合物溶于苯乙烯，可单独引发苯乙烯本体聚合，得无规聚苯乙烯。

甲烷氧化偶联Ti－La－Li系氧化物催化剂制备方法的研究

考察了用不同来源Ｌｉ（ＬｉＮＯ３和ＬｉＳＯ４）制备的催化剂催化的甲烷氧化偶联（ＯＣＭ）反应的特点，探讨了以ＬｉＮＯ３为锂源制备的催化剂的高温反应失活机理。ＸＲＤ、ＩＲ、ＸＰＳ和ＢＥＴ等方法的研究结果表明，以ＬｉＮＯ３为锂源制备的催化剂具有反应活性高、空速大的特点，而以Ｌｉ２ＳＯ４为锂源制备的催化剂具有Ｃ２选择性高、活性低、空速小等特点。由ＬｉＮＯ３制得的催化剂的失活原因是：在较高的反应温度下由于表面Ｌｉ的流失，使体相晶格中的Ｌｉ向表相扩散进而导致含Ｌｉ活性相ＬａＴｉ１－ｙＬｉｙＯ３－λ的分解（或部分分解），从而减少了体相和表相中氧空位的数量，导致催化剂的活性降低。设计了ＮＨ：（ＳＯ４）２浸渍法来固定表面锂。