棘蛙族(Tribe Paini)精子形态结构及精巢年周期研究

棘蛙族(Tribe Paini)隶两栖纲(Amphibia)、无尾目(Anura)、蛙科(Ranidae)、叉舌蛙亚科(Dicroglossinae)，由棘蛙属(Paa)、倭蛙属(Nanorana) 和沙巴蛙属(Chaparana)构成（Dubois,1992）。由于特殊的形态特征和染色体核型，棘蛙族受到国内外学者的广泛重视和研究，但是到目前为止，棘蛙族的系统发育关系尚未明晰，族下属种的分类和归属问题还有待进一步研究和新的证据出现。本文通过光学显微镜、电子显微镜和石蜡切片对棘蛙族10 物种的精子和精巢进行研究，旨在了解棘蛙族精子的形态、量度、超微结构特征及不同季节精巢结构的变化规律，同时为棘蛙族的系统研究提供新的依据，也为棘蛙族濒危物种的保护和经济物种的繁殖提供基础资料。研究结果表明：棘蛙族各属物种精子的形态基本相似，精子整体呈线形，由头部、中片和尾部构成。精子头部呈长条状，顶体呈锥状，位于头部顶端并向前伸出，中片较长，尾部波动弯曲。棘蛙族各属物种精子量度差异较大，将各属物种精子头部、中片、尾部、头宽、尾宽的量度数据进行聚类分析，结果表明棘蛙族10 物种可分为三类：第一类包括棘侧蛙、合江棘蛙、小棘蛙、棘腹蛙和棘胸蛙，特点是精子较短，全长在72.6～103.35µm 之间；第二类包括倭蛙、高山倭蛙、腹斑倭蛙，特点是精子较长，全长在107.74～129.75µm 之间；第三类包括隆肛蛙和双团棘胸蛙，特点是精子最长，全长在145.89～165.84µm 之间。棘蛙族各属精子超微结构基本相似：精子头部由顶体、细胞核构成；中片由中心粒、线粒体构成；尾部由单根轴丝构成。精子顶体横切呈圆环状，细胞核电子密度高；线粒体为卵圆形，呈环状围绕轴丝排列，线粒体数目较多，约30层；尾部轴丝为典型的9＋2结构，即由2根中央微管和9对外周微管组成。不同季节的倭蛙精巢结构变化表明倭蛙精巢每年只有一个生精周期，生精周期始于7 月，繁殖季节从5 月到6 月，生精高峰期为9 月；根据倭蛙不同季节精巢结构的变化，可将生精周期分为3 个阶段：第一阶段从7 月到9 月，为精子形成期；第二阶段从10 月到翌年4 月，为精子的贮存阶段，也即倭蛙的冬眠期；第三阶段从5 月到6 月，为精子的排放阶段，即倭蛙的繁殖期。不同季节的隆肛蛙精巢结构变化表明5 月为隆肛蛙的繁殖高峰期。根据棘蛙族各属精子的形态、量度和超微结构特征，结合已有的棘蛙族形态学、生态学、染色体核型及系统学研究成果，本文认为：1．基于精子数据对棘蛙族的划分和基于形态学及分子系统学数据对棘蛙族的划分均有相同之处，精子形态结构可为棘蛙族的系统研究提供新的证据。2． 棘蛙族各属精子的形态、量度及超微结构不仅与蛙科其他属种有明显差异，而且在无尾类中也较为特殊，精子学研究结果支持将棘蛙族从蛙科中分离出来，归隶于叉舌蛙科的叉舌蛙亚科的系统学修正。3. 精子的顶体、细胞核、中片的形态结构及量度可作为蛙科的分类指标。On the base of unique morphological and kyrotype characters, Dubois(1992)recognized three genera Paa, Narnorana, Chaparana as tribe Paini, which is amember of Dicroglossinae, Ranidae. In present study, the sperm shape, size andultrastructure of 10 paini species were investigated through the light and electronmicroscope, and testis structure of N. pleskei and F. quadrana was also studied. Wesuppose this study could offer some spermatological evidence to phylogeny andreproduction study of tribe Paini. The results were as follows:The sperm shape of tribe paini is homologically similar, the spermatozoa arefiliform, composed of elongate head, long mid-piece and waved tail. The acrosome isapically associated with the nucleus and extend anteriorly.The sperm length of tribe paini differ remarkably among genera. Cluster for thelength of sperm head, mid-piece, tail, total length, head-width, tail-width of ten painifrogs indicated the 10 species could be separated into three groups: GroupⅠcontainsP. shini, P. robertingeri, P. spinosa, P. exilispinosa, P. boulengeri, the spermatozoa ischaracterized with short in total length, ranging from 72.6µm to 103.35µm; GroupⅡcontains N. pleskei, N. parkeri, N. ventripunctata, the spermatozoa ischaracterized with relatively long in total length, ranging from 107.74µm to129.75µm; Group Ⅲ contains F. quadrana and P. yunnanensis, the spermatozoa is characterized with longest in total length, ranging from 145.89µm to 165.84µm. thethree groups based on spermatological data is partially match the classification basedon morphological and molecular data.The ultrastructure of spermatozoa in tribe paini is also basic similar, includingacrosome vescile, nuleus of the head proper, centriole, mitochondriol of themid-pieces, axoneme of the tail. The acrosome vescle is circle in TEM transversesection, the density of nucleus is high; The mitochondrions is oval, surrounding theaxial filament with about 30 layers of mitochondria; The axoneme has the typical 9+2pattern of microtubules.The seasonal changes in testis of N. pleskei indicates it has only onespermatogenesis circle, which begin in July, the reproduction season is from May toJune, the spermatogenesis is active in September. On the base of seasonal changes intestis, the spermatogenesis circle can be separated into three stages: In stageⅠfromJuly to September, spermatids are formed; In stage Ⅱ from October to April next year,the spermatozoa are stored in testis,which is the hibernated period; In stage Ⅲ fromMay to June, mature spermatozoa were released from the testis, which is thereproduction season of N. pleskei. As to F. quadrana, reproduction is active in May.With the previous study of morphology, ecology, karyotypes and phylogenyresearch of tribe Paini, the spermatological data in present study suggests:1. The spermatological classification of tribe paini is partially consistant with themorphological and molecular classification respectively.2.The sperm morphology and ultrustructure of tribe paini is unique not only inthe family Ranida but also in Anura, which suggest the tribe paini is monophyletic andmight be transfered from the family Ranida to the family Dicroglossidae based onmolecular evidence.3. The acrosome, nuleus, shape, length and ultrastructure of mid-piece can beused as an alternative taxonomic character in Anura.

The reaction route and active site of catalytic decomposition of hydrazine over molybdenum nitride catalyst

The catalytic properties of the passivated, reduced passivated, and fresh bulk molybdenum nitride for hydrazine decomposition were evaluated in a microreactor. The reaction route of hydrazine decomposition over molybdenum nitride catalysts seems to be the same as that of Ir/gamma-Al2O3 catalysts. Below 673 K, the hydrazine decomposes into N-2 and NH3. Above 673 K, the hydrazine decomposes into N-2 and NH3 first, and then the produced NH3 further dissociates into N-2 and H-2. From the in situ FT-IR spectroscopy, hydrazine is adsorbed and decomposes mainly on the Mo site of the Mo2N/gamma-Al2O3 catalyst. (C) 2004 Elsevier Inc. All rights reserved.

Novel synthesis of highly active Pt/C cathode electrocatalyst for direct methanol fuel cell

A 40 wt% Pt/C cathode electrocatalyst with controlled Pt particle size of similar to 2.9 nm showing better performance than commercial catalyst for direct methanol fuel cell was prepared by a polyol process with water but without using stabilizing agent.

Liquid-phase hydrodechlorination of chlorinated benzenes over active carbon supported nickel catalysts under mild conditions

Liquid phase hydrodechlorination of chlorinated benzenes was studied over Ni/active carbon (Ni/AC), Ni/gamma-Al2O3, Ni/SiO2 and Raney Ni. The complete dechlorination of chlorobenzene (ClBz) was realized at 333-343 K on Ni/AC under hydrogen atmosphere of 1.0 MPa in the presence of alkaline hydroxide. Dichloro- and trichlorobenzenes were also hydrodechlorinated with 50-95% yields of benzene under the similar conditions, as above. The reaction follows zero-order to ClBz concentration and 1.9 order to hydrogen pressure. The reaction does not proceed in the absence of alkaline hydroxide, suggesting the complete coverage of active nickel surface with produced chlorine and the removal of the chlorine ion with hydroxide ion as a rate-limiting step. The active catalysts were characterized by H-2 chemisorption and transmission electron microscopy techniques. The apparent activity strongly depends on the active area of nickel on catalyst surface. (C) 2004 Published by Elsevier B.V.

Preparation of highly active Pt/C cathode electrocatalysts for DMFCs by an improved aqueous impregnation method

An improved aqueous impregnation method was used to prepare 40 wt% Pt/C electrocatalysts. TEM analysis of the samples showed that the Pt particles impregnated for a short time have a very narrow size distribution in the range of 1-4 nm with an average size of 2.6 nm. UV-vis spectroscopy measurements verified that the redox reaction between PtCl62- and formaldehyde took place with a slow rate at ambient temperature via a two-step reaction path, where PtCl42- serves as an intermediate. The use of the short-time-impregnated 40 wt% Pt/C as cathode electrocatalysts in direct methanol fuel cells yields better performance than that of commercial 40 wt% Pt/C electrocatalyst. Experimental evidence provides clues for the fundamental understanding of elementary steps of the redox reactions, which helps in guiding the design and preparation of highly dispersed Pt catalyst for fuel cells.

A facile and effective method for the distribution of Mo/HZSM-5 catalyst active centers

Post-steaming treatment of Mo/HZSM-5 catalysts results in more molybdenum species migrating into and residing in the HZSM-5 zeolite channels. This is confirmed by XRF and XPS measurements. H-1 MAS NMR and Si-29 MAS NMR also demonstrate that the number of free Bronsted acid sites decreases in the Mo/HZSM-5 catalysts that underwent post-steaming treatment, compared to untreated Mo/HZSM-5 catalysts. As a result, the deactivation rate constant (kd) on the Mo/HZSM-5 catalyst after post-steaming treatment for 0.5 h is much smaller, and the catalyst therefore shows remarkable stability in the probe reaction of methane dehydro-aromatization. The results suggest that a more beneficial bi-functional balance between active Mo species for methane activation and acid sites for the following aromatization is developed over those Mo/HZSM-5 catalysts that have experienced post-steaming treatment for 0.5 h, in comparison with the untreated Mo/HZSM-5 catalysts.

Cyclopropanation on a highly active heterogeneous catalyst: CuO/TiO2-Al2O3

Some heterogeneous catalysts, cupric oxide supported on different supports, were prepared and employed to catalyze the cyclopropanation of styrene and 2,5-dimethyl-2,4-hexadiene with ethyl diazoacetate (EDA). The catalytic performance for cyclopropanation strongly depends on the nature of the support. A novel catalyst, CUO/TiO2-Al2O3, in which Al2O3 is modified with a monolayer TiO2, is found to be most active and selective for the cyclopropanation reaction. The yields of 93 and 94% cyclopropanes are obtained for styrene and 2,5-dimethyl-2,4-hexadiene at 40 degreesC as the substrates, respectively. The activity and selectivity in cyclopropanes are optimized with a monolayer dispersion of cupric oxide on the corresponding supports. (C) 2002 Elsevier Science B.V. All rights reserved.

In situ IR spectroscopic studies on molybdenum nitride catalysts: active sites and surface reactions

Recent IR spectroscopic studies on the surface properties of fresh Mo2N/gamma-Al2O3 catalyst are presented in this paper. The surface sites of fresh Mo2N/gamma-Al2O3, both Modelta+ (0<δ<2) and N sites, are probed by CO adsorption. Two characteristic IR bands were observed at 2045 and 2200 cm(-1), due to linearly adsorbed CO on Mo and N sites, respectively. The surface N sites are highly reactive and can react with adsorbed CO to form NCO species. Unlike adsorbed CO on reduced passivated one, the adsorbed CO on fresh Mo2N/gamma-Al2O3 behaves similarly to that of group VIII metals, suggesting that fresh nitride resembles noble metals. It is found that the surface of Mo nitrides slowly transformed into sulfide under hydrotreating conditions, which could be the main reason for the activity drop of molybdenum nitride catalysts in the presence of sulfur-containing species. Some surface reactions, such as selective hydrogenation of 1,3-butadiene, isomerization of 1-butene, and hydrodesulfurization of thiophene, were studied on both fresh and reduced passivated Mo2N/gammaAl(2)O(3) catalysts using IR spectroscopy. The mechanisms of these reactions are proposed. The adsorption and reaction behaviors of these molecules on fresh molybdenum nitride also resemble those on noble metals, manifesting the unique properties of fresh molybdenum nitride catalysts. Mo and N sites are found to play different roles in the adsorption and catalytic reactions on the fresh Mo2N/gammaAl(2)O(3) catalyst. Generally, Mo sites are the main active sites for the adsorption and reactions of adsorbates; N sites are not directly involved in catalytic reactions but they modify the electronic properties of Mo sites.