Syntheses of biphenyl polyimides via nickel-catalyzed coupling polymerization of bis(chlorophthalimide)s

A facile method for the synthesis of biphenyl polyimides, which involves the nickel-catalyzed coupling of aromatic dichlorides containing imide structure in the presence of zinc and triphenylphosphine, has been developed. The polymerizations proceeded smoothly under mild conditions and produced biphenyl polyimides with inherent viscosities of 0.13-0.98 dL/g. The polymerizations of bis(4-chlorophthalimide)s with bulky side substituents gave high molecular weight polymers. Low molecular weight polymers from bis(4-chlorophthalimide)s containing rigid diamine moieties and bis(3-chlorophthalimide)s were obtained because of the formations of polymer precipitate and cyclic oligoimides, respectively. The effects of various factors, such as amount of catalyst, solvent volume, ligand, reaction temperature, and time, on the polymerization were studied. The random copolymerization of two bis(chlorophthalimide)s in varying proportions produced medium molecular weight material. The TgS of prepared polyimides were observed at 245-311 degreesC, and the thermogravimetry of polymers showed 10% weight loss in nitrogen at 470-530 degreesC.

Synthesis, electrical properties and crystal structure of a new radical-ion salt based on pi-extended bis(TTF) and a Keggin heteropolymolybdate

By electrocrystallization of 2,6-[4,5-bis(n-butylsulfanyl)-1,3-dithiol-2-ylidene]-4,8-bis(6-iodo-n-hexyloxy)-1,3,5,7-tetrathia-s-indacene (BHBDTI) and [NBu4](4)[SiMo12O40] in the mixed solvent CHCl2CH2Cl and CH3CN, the new radical-ion salt [C42H60Cl2O2S12](2)[SiMo12O40] was prepared. It was characterized by means of IR and ESR spectroscopy and X-ray diffraction. In the crystal structure, organic radical dications and silicomolybdate anions are alternatively arranged along the a axis to form a 1-D conducting layer. The organic layer consists of two isolated groups of BHBDTI divided by the (011) plane without short interatomic contacts. However, in each group, BHBDTI molecules associate with each other in a head to tail manner running along the [011] direction and face-to-face overlapping with a relative shift by approximately one TTF subunit along the long axis of the molecule and a slight shift along the short axis of the molecule with significantly short S ... S contacts. The room-temperature d.c. conductivity determined by the two-probe method is 10(-4) S cm(-1), suggesting that the compound is a semiconductor.

The synthesis of a 1,1'-bi-2-naphthol-based bis(ether anhydride) and aromatic polyimides derived therefrom

2,2'-Bis(3,4-dicarboxyphenoxy)-1,1'-binaphthyl dianhydride was used as a new monomer with various aromatic diamines to obtain polyimides by the usual two-step method. The bis(ether anhydride) was prepared by a nucleophilic substitution of I,1'-bi-2-naphthol with N-phenyl-4-chlorophthalimide, N-methyl-4-nitrophthalimide or 4-nitrophthalonitrile in aprotic polar solvent, and subsequent hydrolysis of the resulting bis(ether imide)s or bis(ether dinitrile), and then dehydration of the corresponding tetracarboxylic acid to afford the dianhydride. Most of the obtained polyimides were soluble in chloroform, pyridine, DMF, etc. The polyimide prepared from p-phenylene diamine was partial crystalline, whereas the others showed amorphous patterns in a WAXD study. These polymers have glass transition temperatures between 255-294 degrees C and 5% weight loss temperatures in the range of 502-541 degrees C in nitrogen and 473-537 degrees C in air. (C) 1997 Elsevier Science Ltd.

钴-4-(5-氯-2-吡啶偶氮)-1,3-二氨基苯-Triton X-100体系的析相富集及痕量钴的光度测定

本文研究了TritonX-100在浊点条件下对钴-4-(5-氯-2-吡啶偶氮)-1,3-二氨基苯(5-Cl-PADAB)络合物的析相条件,在pH4.0～6.0介质中,将胶束溶液加热到92±1℃,保持40min,络合物即被TritonX-100相富集。富集液在575nm测定吸光度,钴含量在0～4μg/5ml范围内服从比尔定律,干扰离子可在TritonX-100析相液中加入H_2SO_4消除。拟定的方法灵敏、简捷,已用于不经分离直接测定人发及自来水中痕量钴。

大庆RP-3航空煤油热物性分析

针对广泛应用于超燃冲压发动机的吸热碳氢燃料,简要介绍了用于模拟燃料热物理特性的替代燃料方法和广义对应状态法则.以大庆RP-3航空煤油为例,选择了一个由49%（摩尔比）正十烷,44%1,3,5-三甲基环己烷以及7%正丙基苯组成的替代煤油用来模拟RP-3航空煤油进行热物理特性研究,并采用广义对应状态法则对替代煤油热力学和输运特性进行了数值研究.在此基础上,提出了预测超临界态流体通过音速喷管流量的新方法并得到了实验验证.

Analysis of Thermophysical Properties of Daqing RP-3 Aviation Kerosene

针对广泛应用于超燃冲压发动机的吸热碳氢燃料,简要介绍了用于模拟燃料热物理特性的替代燃料方法和广义对应状态法则.以大庆RP-3航空煤油为例,选择了一个由49%（摩尔比）正十烷,44%1,3,5-三甲基环己烷以及7%正丙基苯组成的替代煤油用来模拟RP-3航空煤油进行热物理特性研究,并采用广义对应状态法则对替代煤油热力学和输运特性进行了数值研究.在此基础上,提出了预测超临界态流体通过音速喷管流量的新方法并得到了实验验证.

高亲和力PO4(3-)转运子编码基因的cDNA克隆及特性分析

以简并引物，利用RT -PCR，克隆了普通小麦和黑麦根系的PO 43-转运子( Trans-porter)基因长约1.2kb的部分cDNA序列。对其与GenBank中的已知序列进行同源性比较，结果表明：(1)小麦与拟南芥、番茄等高等植物的氨基酸水平的同源性为60%～78%; (2)与酵母较低为40%左右，而与丝状真菌和细菌的同源性则<27%; (3)小麦与黑麦的同源性为75%。对其表达特性的研究表明：(1)该基因在根系和茎叶组织中均有表达，但在根系组织中转录产物的累积量显著高于茎叶;(2)磷饥饿条件下，茎叶和根系组织中该基因的表达均增强，但根系组织中增强幅度较大，由此认为该基因产物的功能不只是根系从生长环境中吸收PO 43-，而与PO 43-在植物体内的转运密切相关;(3)磷饥饿5天 后的植株重新供给充足的PO 43-，则该基因的表达在24小时内即显著减弱;(4)分根试验中同株的部分根系生长于磷饥饿(OuM)环境中，而另一部分根系生长于PO 43-充足(250uM)的环境中，这两部分根系中该基因转录产物的积累水平并无显著差异。因此认为植物感受磷饥饿胁迫的信号可能来自植物体内部POi-库的耗竭。此外，用磷讥饿条件下的普通小麦根系mRNA构建了cDNA文库，以克隆的部分序列为探针，从cDNA文库中分离了全长序列。

Frog skins keep redox homeostasis by antioxidant peptides with rapid radical scavenging ability

The question of how amphibians can protect themselves from reactive oxygen species when exposed to the sun in an oxygen-rich atmosphere is important and interesting, not only from an evolutionary viewpoint, but also as a primer for researchers interested in mammalian skin biology, in which such peptide systems for antioxidant defense are not well studied. The identification of an antioxidant peptide named antioxidin-RL from frog (Odorrana livida) skin in this report supports the idea that a peptide antioxidant system may be a widespread antioxidant strategy among amphibian skins. Its ability to eliminate most of the 2,2'-azino-bis(3-ethylbenzthiazoline-6-sulfonic acid) radical tested within 2 s, which is much faster than the commercial antioxidant factor butylated hydroxytoluene, suggests that it has a potentially large impact on redox homeostasis in amphibian skins. Cys10 is proven to be responsible for its rapid radical scavenging function and tyrosines take part in the binding of antioxidin-RL to radicals according to our nuclear magnetic resonance assay. (C) 2010 Elsevier Inc. All rights reserved.

乳腺增生病p53基因第5外显子突变及其蛋白表达

目的 :探讨 p5 3基因在乳腺癌发生早期的作用。 方法 :用免疫组化方法检测 36例乳腺单纯性增生、31例不典型增生、14例原位癌和 16例浸润癌中 p5 3蛋白的表达 ,用PCR SSCP检测了上述组织中 p5 3基因第 5外显子突变。 结果 :p5 3蛋白在单纯性增生、不典型增生、导管内癌、浸润癌中的表达率分别为 0、2 2 6 % (7/ 31)、42 8% (6 / 14)、5 0 % (8/ 16 ) ,PCR SSCP在各组中均未检测到该基因第 5外显子突变。结论 :乳腺癌发生早期阶段有 p5 3基因的参与 ,但与第 5外显子突变无明显关系

利用3对引物鉴定产毒和非产毒微囊藻

根据微囊藻毒素合成酶基因簇序列 ,合成了 3对引物epF/mb1R ,mcF/teR ,mcF/umR ,通过全细胞PCR的方法检测了 19种不同来源微囊藻产毒的情况。 3种引物对 15株产毒微囊藻中均可扩增到预期大小的片段 ,测序结果证明这些片段是微囊藻毒素合成酶基因片段。PCR反应结果与HPLC分析所得到的结果有良好的对应性。在此基础上 ,初步确定了 3对引物检测产毒微囊藻对细胞浓度要求的下限。与其它引物相比 ,3对引物的特异性强 ,扩增条带大小适中 ,便于观察

Effect of InxGa1-xAs (0 <= x <= 0.4) capping layer on self-assembled 1.3 mu m wavelength InAs/GaAs quantum islands

We report the effect of InchiGa1-chiAs (0 less than or equal to chi less than or equal to0.4) capping layer on photoluminescence (PL) properties of 1.3 mum wavelength self-assembled InAs quantum islands, which are formed via depositing 3.5 monolayers (ML) InAs on GaAs (1 0 0) substrate by molecular beam epitaxy (MBE). Compared with the InchiGa1-chiAs capping layer containing a larger In mole fraction chi greater than or equal to0.2 and the GaAs capping layer (chi = 0), the InAs islands covered by the In0.1Ga0.9As layer show PL with lower emission energy, narrower full-width at half-maximum (FWHM), and quite stronger intensity. The PL peak energy and FWHM become more temperature dependent with the increase of In content in the InchiGa1-chiAs capping layer (chi greater than or equal to0.2), while the InAs islands covered by the In0.1Ga0.9As layer is much less temperature sensitive. In addition, the InAs islands covered by the In0.1Ga0.9As capping layer show room temperature PL wavelength at about 1.3 mum. (C) 2001 Published by Elsevier Science B.V.

Si1-xGex/Si resonant-cavity-enhanced photodetectors with a silicon-on-oxide reflector operating near 1.3 mu m

We report on a Si1-xGex/Si multiple quantum-well resonant-cavity-enhanced (RCE) photodetector with a silicon-on-oxide reflector as the bottom mirror operating near 1.3 mu m. The breakdown voltage of the photodetector is above 18 V and the dark current density at 5 V reverse bias is 12 pA/mu m(2). The RCE photodetector shows enhanced responsivity with a clear peak at 1.285 mu m and the peak responsivity is measured around 10.2 mA/W at a reverse bias of 5 V. The external quantum efficiency at 1.3 mu m is measured to be 3.5% under reverse bias of 16 V, which is enhanced three- to fourfold compared with that of a conventional p-i-n photodetector with a Ge content of 0.5 reported in 1995 by Huang [Appl. Phys. Lett. 67, 566 (1995)]. (C) 2000 American Institute of Physics. [S0003-6951(00)00628-8].

稀土发光材料M_2O_3:RE~(3+)（M＝Y，Gd:RE＝Eu，Tb）体系的AAO模板组装

AAO模板具有高度有序的纳米孔阵列，其孔径可以在5一200nm范围内调节，利用AAO模板进行纳米组装已成为纳米结构材料组装的重要技术之一。目前，采用该技术已经制备出了金属、半导体、碳、导电高分子以及其它材料构成的纳米管、纳米线、纳米纤维、电缆等纳米结构单元和有序纳米阵列材料，同时，研究了它们的光、电、磁和催化等特性及其在光学材料、铿电池的电极材料、垂直磁性记录材料和光催化剂等方面的潜在应用。然而，有关稀土发光材料的AAO模板合成及其性质还鲜见报道。本论文采用二次阳极氧化技术制备出了具有高度有序纳米阵列孔的AAO模板。采用溶胶一凝胶法和水热法对稀土发光材料M2O3:RE3+（M＝Y,Gd; RE＝Eu，Tb）体系进行了AAO组装，得到了纳米线、纳米管及其纳米线阵列。对AAO模板和组装样品的形貌、结构和光谱性质进行了表征，得到了一些令人感兴趣的研究结果，其主要的结果和结论总结如下：（1）采用二次阳极氧化法制备出了孔径约为5Onm、35nm和2Onm等系列高度有序纳米阵列孔的基体铝支持的AAO模板和独立支撑的AAO模板。（2）XRD测试结果表明：退火后的基体铝片，其331晶面优先结晶生长，这有利于高度有序纳米阵列孔AAO模板的制备。使用这些退火后的铝片，通过二次阳极氧化法制备的高度有序纳米阵列孔AAO膜为非晶态，并且在退火后转变为γ-Al2O3。（3）未退火的基体铝支持的AAO模板，在350一600nm范围内发出较强的蓝光，其峰值波长位于435nm。该蓝光发射带经过程序控温慢慢退火后完全消失，这说明它产生于缺陷发光中心。（4）采用溶胶一凝胶法，利用AAO模板首次合成出了（YO.96RE0.05）O3（RE＝Eu，Tb）纳米线及其阵列，并通过SEM、EDX、TEM、SAED、XRD和PL分析测试加以确认。x-射线衍射（XRD）和选区电子衍射（SAED）的结果证明，这些纳米线主要是由立方相的RE2O3（RE＝Y或Gd）多晶材料组成的。光谱测试结果表明，同体相材料相比，Eu3＋的，D0一7F2跃迁发射峰和Tb3＋的5D4一7FJ（J=6，5，4，3）跃迁发射峰出现了宽化，这种现象可能是纳米颗粒的表面界面效应所引起的非均匀宽化造成的。（5）首次观察到利用溶胶一凝胶法组装的一部分M2O3:RE3＋（M＝Y，Gd；RE＝Eu，Tb）样品，沿着AAO模板阵列孔壁的边沿所形成的网状结构，并初步地探讨了其形成的机理。（6）对于M2O3:RE3＋（M=Y，Gd；RE＝Eu，Tb）体系，仅仅依靠毛细作用是难以充分地将溶胶前驱液组装进从O模板的阵列孔中。（7）首次利用水热合成法，在中性条件介质下，将（Y，Gd）2O3:Eu3+样品充分地组装进了AAO模板的纳米孔道中，这说明水热产生的高压可以作为AAO模板组 装样品的驱动力。（8）以M2O3: RE3+（M＝Y，Gd；RE＝Eu，Tb）溶胶或氢氧化物沉淀作为前驱物，分别在酸性和碱性条件下，进行了从0模板水热合成组装。实验结果表明，AAO模板被部分地损坏。但在碱性条件下的高压釜中，却得到了单晶纳米管、纳米片和纳米棒。

吸水链霉菌、放线菌Sp.253和金色毛壳菌的次生代谢产物研究

链霉菌是十分重要的一类放线菌，绝大多数的抗生素都由该类细菌产生。毛壳属真菌是一类重要的丝状真菌，从中也发现有很多结构新颖、活性独特的活性物质。因此本论文对两株链霉菌的活性成分及一株金毛壳菌的次生代谢产物进行了研究。 1．从吸水链霉菌（Streptomyces hygroscopicus 1.358）液态发酵产物（乙酸乙酯提取物）中分离得到3个化合物，通过波谱方法鉴定为RK955A (1)、Nigericin（2）、Elaiophylin（3）。以青霉素耐药-金黄色葡萄球菌作为指示菌的抗菌活性测定表明，三者均具有较强抗菌活性。 2．通过抗肿瘤体外活性筛选模型筛选得到得到一株链霉属土壤放线菌，从中分离得到六个化合物：苯乙酰胺（4）、苯丙酰胺（5）、肉桂酰胺（6）、3-（N-（甲酰胺基）乙酰基）吲哚（7）、鸟苷磷酸（8）、鸟苷（9）。 3．从金色毛壳菌（Chaetomium aureus）的固态培养物中分离得到13个化合物，利用波谱方法将其鉴定为：金毛壳菌素A（10）、金毛壳菌素B（11）、Eugenetin（12）、Eugenitol（13）、Chaetoquadrin A（14）、Chaetoquadrin B（15）、Chaetoquadrin G（16）、Chaetoquadrin H（17）、Chaetochromin A（18）、Sterigmatocystin（19）、O-methylsterigmatocystin（20）、3β-羟基-麦角甾-5，7，22-三烯（21）和过氧麦角甾醇（22）。 4．综述了聚醚类抗生素的结构、生物合成、生物活性及作用机理。 The genus Streptomyces (Actinomycetes) is an important group of microbe. Most antibiotics known nowdays are discovered from species of Streptomyces. The fungi of the genus Chaetomium have attracted much attention because various kinds of secondary metabolites with diverse bioactivities have been found from them. Thus, the bioactive compounds from two strains of Streptomyces and the secondary metabolites of Chaetomium aureus were investigated. 1. Three compounds were isolated from the ethyl acetate extract of the fermentation broth of Streptomyces hygroscopicus. They are identified to be elaiophylin (1), nigericin (2), and antibiotic RK955A (3) on the basis of their spectroscopic data. Compounds 1-3 possess antibacterial activities against Staphyloccocus aureus. 2. It was found that the extract of the fermented broth of a strain of Actinomycetes could inhibit some tumor cel lines. Separation of the bioactive fraction led to the isolation of six compounds. They were characterized to be phenylacetamide (4), phenylpropylamide (5), trans-cinnamamide (6), 3- (N- (formylmethyl) acetamide) indole (7), guanylicacid (8), and guanosine (9). 3. From the fermented broth of Chaetomium aureus, 13 compounds were isolated for the first time. They were determined to be chaetomiumycin A (10), chaetomiumycin B (11), eugenetin (12), eugenitol (13), chaetoquadrin A (14), chaetoquadrin B (15), chaetoquadrin G (16), chaetoquadrin H (17), chaetochromin A (18), sterigmatocystin (19), O-methylsterigmatocystin (20), 3β-hydroxyergosta-5, 7, 22-triene (21) and peroxy-ergosterol (22). Compounds 10 and 11 are new ones. 4. Structure, biosynthesis, biological activity, and mechanisms of polyether antibiotics were reviewed.

5-氟尿嘧啶-β-环糊精结肠靶向前体药物的研究

5-氟尿嘧啶(5-Fluorouracil， 5-FU)是一种抗代谢药物，广泛用于临床治疗结直肠癌、胃癌、乳腺癌等多种癌症，但其首过代谢显著、亲脂性较低，选择性差、毒副作用大。为克服这些缺点人们对5-FU进行了大量的修饰工作，包括小分子修饰以及与各种载体形成微球、微囊、纳米粒、共价前药等。 环糊精(Cyclodextrin，简称CD)，可被结肠中的糖苷酶特异性地降解成小分子糖，而胃和小肠中由于缺乏相应的酶而使环糊精不被降解，这一特性在结肠药物的靶向输送及释放中有重要应用价值。环糊精中含有丰富的羟基，易进行化学修饰，将药物与环糊精通过共价键结合制成前药，使其在胃和小肠中不降解，而在盲结肠中被特异性的酶降解释出药物，达到结肠靶向释药的目的。研究表明，环糊精作为一种前药载体为结肠靶向释药和缓释、控释系统提供了一种有效的手段。 本工作选择5-氟尿嘧啶为模型药物、β-环糊精作为载体，通过中间体5-FU羧酸衍生物的制备及其与β-环糊精的偶联，合成了系列5-FU-β-CD前体药物，并利用紫外、红外、质谱、核磁、元素分析、热分析等手段对其进行结构表征。同时，还研究了前体药物的体外释药性质。具体内容包括： 1. 含有羧基的5-FU衍生物中间体的合成：(5-氟尿嘧啶-1-基)-乙酸(FUAC)、3-(5-氟尿嘧啶-1-基)-丙酸(FUPC)、5-(5-氟尿嘧啶-1-基)-戊酸(FUVC)的合成。 2. 中间体5-FU的羧酸衍生物与β-CD的偶联：分别通过以6-OTs-β-CD为中间体的取代法和活化酯法，合成了第一面取代和第二面取代的5-FU-β-CD大分子前体药物。在二面取代的前体药物制备中，通过改变原料的比例，合成了系列不同取代度(DS)的2-[(5-氟尿嘧啶-1-基)-乙酰基] -β-环糊精结合物。 3. 对上述前体药物进行体外释放研究：分别考察了前体药物在不同pH缓冲溶液中的水解行为及其在小鼠胃肠道人工体液中的酶解行为，并通过UV-Vis及HPLC对前体药物释放情况进行检测分析。 5-Fluorouracil(5-Fu), commonly known as a broad-spectrum antineoplastic drug, has been widely used in the treatment of various kinds of cancer including colon cancer for 40 years. However, this antitumor agent exhibits serious adverse effects, such as their marrow toxicity, gastrointestinal reaction and low selectivity in their clinical use. In order to improve its antitumor activity and reduce its toxicity, the compound was modified in various ways, including the formation of conjugated prodrugs with kinds of carrier, microsphere and nanoparticles etc. Cyclodextrins(CDs) are known to be barely capable of being hydrolyzed and only slightly absorbed in passing through the stomach and small intestine; however they are fermented into small saccharides by colonic microflora and thus absorbed as small saccharides in the large intestine. This biodegradation property of CDs may be useful as a colon-targeting carrier, and thus CD prodrugs may serve as a source of site-specific delivery of drugs to colon. It was demonstrated that prodrugs of CDs can provide a versatile means for construction of not only colon targeted delivery systems, but also delayed release systems. 5-Fluorouracil was taken as a model drug and β-CD as the carrier in this study. Series prodrugs of 5-FU was prepared through the preparation of reactive 5-FU derivatives containing carboxyl group and coupling to hydroxyl groups of CD. The structures of the conjugates were charactered by using IR, UV–vis, ESI-MS, 1H, 13C-NMR spectra, elemental analyses, and thermal analysis. In vitro hydrolysis behavior in aqueous solution and in rat gastrointestinal tract contents of the conjugates were also investigated. The main content of this dissertation includes following aspects: 1. The preparation of 5-FU derivatives containing carboxyl group: 5-Fluorouracil- acetic acid(FUAC)、3-(5-FU-1)-propionic acid (FUPC)、and 5-(5-FU-1)-valeric acid(FUVC). 2. The coupling of 5-FU derivatives to β-CD: 5-FU was selectively conjugated onto the primary or secondary hydroxyl groups of β-CD through an ester linkage, by the substitution of 6-OTs-β-CD and the activated ester method respectively. For the secondary face conjugation, the degree of substitution(DS) can be controlled by changing the mole ratio of the starting materials(FUAC and β-CD). 3. In vitro release behavior of the conjugates in aqueous solution and in rat gastro- intestinal tract contents of the conjugates were investigated, and the reaction was monitored and analyzed by using UV-Vis and HPLC methods.