Influence of processing medium on frictional wear properties of ball bearing steel prepared by laser surface melting coupled with bionic principles

Coupling with bionic principles, an attempt to improve the wear resistance of ball bearing steel (GCr15) with biomimetic units on the surface was made using a pulsed Nd: YAG laser. Air and water film was employed as processing medium, respectively. The microstructures of biomimeitc units were examined by scanning electron microscope and X-ray diffraction was used to describe the microstructure and identify the phases as functions of different mediums as well as water film with different thicknesses. The results indicated that the microstructure zones in the biomimetic specimens processed with water film were more refined and had better wear resistance increased by 55.8% in comparison with that processed in air; a significant improvement in microhardness was achieved by laser surface melting. The application of water film provided considerable microstructural changes and much more regular grain shape in biomimetic units, which played a key role in improving the wear resistance of ball bearing steel. (c) 2010 Elsevier B.V. All rights reserved.

Influence of processing temperature on microstructure and microhardness of copper subjected to high-pressure torsion

Cu samples were subjected to high-pressure torsion (HPT) with up to 6 turns at room temperature (RT) and liquid nitrogen temperature (LNT), respectively. The effects of temperature on grain refinement and microhardness variation were investigated. For the samples after HPT processing at RT, the grain size reduced from 43 mu m to 265 nm, and the Vickers microhardness increased from HV52 to HV140. However, for the samples after HPT processing at LNT, the value of microhardness reached its maximum of HV150 near the center of the sample and it decreased to HV80 at the periphery region. Microstructure observations revealed that HPT straining at LNT induced lamellar structures with thickness less than 100 nm appearing near the central region of the sample, but further deformation induced an inhomogeneous distribution of grain sizes, with submicrometer-sized grains embedded inside micrometer-sized grains. The submicrometer-sized grains with high dislocation density indicated their nonequilibrium nature. On the contrary, the micrometer-sized grains were nearly free of dislocation, without obvious deformation trace remaining in them. These images demonstrated that the appearance of micrometer-sized grains is the result of abnormal grain growth of the deformed fine grains.

同源四倍体水稻三系亲本的遗传差异、细胞遗传学比较研究及低直链淀粉含量突变体Wx基因序列分析

同源四倍体水稻（2N=4X=48,AAAA）是由二倍体水稻（2N=2X=24,AA）通过秋水仙素诱导染色体加倍后得到的新品系，具有优良的抗病性以及较高的蛋白质含量。因此，在四倍体水平上挖掘水稻的增产潜力成为水稻育种的新手段。同源四倍体水稻具有很强的遗传可塑性和很弱的遗传保守性，利用其作为水稻远缘杂交的桥梁，从野生物种中不断地引进有益的基因，这将有助于杂交水稻的多代利用和固定水稻的杂种优势。但是迄今为止，还没有关于同源四倍体水稻遗传多样性，遗传背景的报道。目前世界关于同源四倍体水稻的研究主要集中在中国，主要研究方向为培育、筛选结实正常的亲本材料，配置和筛选结实率正常或接近正常的组合。经过几十年研究，虽然在材料构建，细胞学研究等方面取得了较大进展，但同样由于结实率低的瓶颈问题未解决，而使多倍体水稻育种未能取得实质性进展。而近年来一些关于同源四倍体水稻低结实率机理的细胞学研究也由于缺乏统计学数据而缺乏说明性。本文用SSR标记，对选取的36个结实率正常同源四倍体水稻三系亲本和14个来源二倍体亲本，分析他们的遗传差异和群体遗传结构。本文还利用我们培育的高、低结实率的同源四倍体水稻恢复系、优良保持系和杂种F1及二倍体对照为材料，进行系统深入的细胞遗传学研究，进一步探讨同源四倍体水稻有性传递后代的发育过程，探索分裂期染色体行为特征与遗传性状稳定性的关系，为进一步选育多倍体水稻品种并将其应用于生产提供理论依据。同源四倍体水稻突变株D4063-1直链淀粉含量比来源二倍体明恢63下降一半,即其直链淀粉含量为5.23%，为研究其直链淀粉含量下降的原因，本文还根据普通水稻Wx基因设计引物，扩增测序获得了D4063-1Wx基因的全序列，与已报道Wx基因进行比对分析，并根据D4063-1和籼稻、粳稻的序列差异并根据D4063-1在该片段上的特征序列位点设计了用于识别D4063-1的寡核苷酸片段,为快速、准确的鉴别低直链淀粉的D4063-1创造了条件。 SSR标记具有基因组分布广泛、数量丰富、多态性高、容易检测、共显性、结果稳定可靠、实验重现性好、操作简单、经济、易于高通量分析等许多优点，被认为是用于遗传多样性、品种鉴定、物种的系统发育、亲缘关系及起源等研究的非常有效的分子标记。本研究选取了中国科学院成都生物所培育的同源四倍体和二倍体水稻亲本，并用36个微卫星标记进行了遗传差异和种群遗传结构分析。在50个品系中，我们观察到较高水平的多态性，每基因等位基因数（Ae）分布于2至6之间（平均值3.028），多态性信息含量（PIC）分布于0.04至0.76之间（平均值0.366）；期望杂合度（He）分布于0.04至0.76之间（平均值0.370），Shannon指数（I）分布于0.098至1.613之间（平均值0.649）。同源四倍体品系的等位基因数，期望杂合性和Shannon指数都比二倍体品系高。在供试50个品系中，较多材料均发现Rare基因，根据SSR多态性指数我们构建了同源四倍体和二倍体水稻的核心指纹库。F-统计值表明遗传差异主要存在于同源四倍体品系中（Fst=0.066）。聚类分析结果表明50个品系可以分为4个组。I组包括所有的同源四倍体和二倍体籼稻保持系，以及一个同源四倍体籼稻雄性不育系及其来源二倍体。II组仅包括IR来源的品系。III组比II组和IV组更复杂，包括同源四倍体和二倍体籼稻恢复系品系。IV组包括同源四倍体和二倍体粳稻品系。此外,由于等位基因及配子的遗传差异,同源四倍体与二倍体品系中存在单位点和双位点的遗传差异。分析结果表明,二倍体和四倍体水稻基因库的不同,其中遗传变异可以区分四倍体与二倍体水稻。同源四倍体水稻具有长期而独立的遗传性，我们能够选育并得到与二倍体亲本相比有特殊优良农艺性状的品系。 本研究以高结实率的同源四倍体水稻恢复系DTP-4、D明恢63及优良保持系D46B为材料进行农艺性状及细胞遗传学比较研究。DTP-4、D明恢63及保持系D46B的的染色体组成均为2N=4X=48，花粉母细胞具有较为理想的减数分裂行为，配对染色体的比率在99%以上，这与理论染色体组构成相符。DTP-4和D明恢63PMC减数分裂各个时期单价体和三价体的比例都非常低，而在MI， PMC观察到较多的二价体和四价体且四价体多以环状形式出现，其最大频率的染色体构型分别为12II 6IV和10II 7IV。恢复系DTP-4和D明恢63在MI四价体频率分别为2.00/PMC和2.26/PMC，而保持系D46B在MI四价体频率为6.00/PMC，极显著地高于恢复系品系，表明保持系D46B具有更好的染色体配对性质；AI保持系D46B的染色体滞后频率为10.62%，远低于恢复系材料DTP－4和D明恢63的19.44％和23.14％，接近二倍体对照明恢63的7.30%水平；TI保持系D46B具有比恢复系更低频率的微核数。而在TII，D46B的正常四分小孢子比率不但高于恢复系品系甚至高于二倍体对照。对高低结实率的同源四倍体水稻恢复系和杂种F1代的花粉育性，结实率和细胞遗传学行为进行了比较研究。DTP-4, D明恢63, D46A´DTP-4和D46A´D明恢63的花粉育性和结实率比D什香和D46A´D什香显著提高。减数分裂分析的结果表明，DTP-4，D明恢63，D什香，D46A´DTP-4，D46A´D明恢63和D46A´D什香其减数分裂染色体构型分别为：0.05I +19.96 II (9.89棒状+10.07环状) +0.01III + 2.20 IV, 0.11I +19.17 II (8.90 棒状+10.37 环状) +0.09III + 2.26 IV + 0.01 VI, 1.33I +9.46 II (4.50 棒状+4.96 环状) +0.44III + 6.02 IV + 0.09VI + 0.09 VIII, 0.02I +14.36 II (6.44 棒状+7.91 环状) +0.01III + 4.80IV + 0.01VIII, 0.06 I +17.67 II (11.01 棒状+6.67 环状) +0.06 III + 3.10 IV + 0.01 VI and 1.11 I +11.31 II (5.80 棒状+5.51 环状) +0.41 III + 5.63 IV+0.03VI+0.03VIII。在同源四倍体水稻恢复系和杂种F1代材料中，最常见的染色体构型为16II +4IV和12II +6IV。在减数分裂过程中，结实率较高的材料染色体异常现象较少而结实率较低的材料染色体异常现象较严重。在杂种F1代中，二价体的比例要低于其相应的恢复系亲本，同样的，单价体，三价体和多价体的比例相比其恢复系亲本也偏低。然而，在减数分裂MI，杂种F1代中四价体的比例要显著高于其恢复系亲本。在中期I，每细胞单价体的比例和花粉育性呈现出极高的负相关(-0.996)，当单价体数目升高时，花粉育性下降。其次是每细胞三价体的比例(-0.987)，之后则是每细胞多价体的比例与花粉育性的负相关(-0.948)。但是统计分析表明，二价体和四价体的比例对花粉育性和结实率没有显著影响。这一结果表明出了花粉育性和细胞减数分裂行为的相关性，同源四倍体的减数分裂行为为筛选高结实率的同源四倍体种系提供了理论依据。 突变体是遗传学研究的基本材料。利用突变体克隆水稻基因,并进而研究基因的生物学功能是水稻功能基因组学的重要研究内容。本课题组在多年的四倍体水稻育种研究中已获得多个低直链淀粉含量突变体，其中一些突变体在直链淀粉含量下降的同时，胚乳外观也发生了显著改变，呈半透明或不透明。同源四倍体水稻突变株D4063-1直链淀粉含量比来源二倍体明恢63下降一半,即其直链淀粉含量为5.23%。为研究其直链淀粉含量下降的原因，我们根据普通水稻Wx基因设计引物，扩增测序获得了D4063-1Wx基因的全序列，与已报道Wx基因进行比对分析；同源四倍体水稻D4063-1Wx基因最显著变化为在外显子序列中发生了碱基缺失，导致移码突变，在第9外显子终止密码子提前出现。D4063-1Wx基因碱基位点的变化还导致了其序列上的酶切位点的变化,对常用限制性内切酶位点分析分析结果表明同源四倍体水稻相对于籼稻和粳稻多了2个sph1酶切位点，相对于粳稻减少了6个Acc1，增加了4个Xba1，1个Xho1，1个Pst1和1个Sal1酶切位点。聚类分析表明D4063-1Wx基因序列与籼稻亲源关系较近，由此推测D4063-1Wx基因来源于籼稻的Wxa基因型。另外，根据D4063-1Wx基因的碱基差异，我们推测D4063-1Wx基因外显子碱基变化导致的RNA加工障碍是其直链淀粉降低的主要原因，并可能与其米饭较软等品质相关。本文还根据D4063-1和籼稻、粳稻的序列差异并根据D4063-1在该片段上的特征序列位点设计了用于识别D4063-1的寡核苷酸片段,并作为PCR反应的引物命名为AUT4063-1,将该引物与我们设计的扩增普通籼稻、粳稻的Wx基因引物F5配合使用建立了识别D4063-1的显性和共显性两种检测方式的分子标记,为快速、准确的鉴别低直链淀粉的D4063-1创造了条件。 研究同源四倍体水稻基因组的遗传差异，探索同源四倍体水稻的遗传规律，研究分裂期染色体行为特征与遗传性状稳定性的关系,旨在揭示四倍体水稻中同源染色体配对能力的遗传差异，为进一步选育多倍体水稻品种并将其应用于生产提供理论依据。 Autotetraploid rice (2N=4X=48, AAAA) is a new germplasm developed from diploid rice (2N=2X=24, AA) through chromosomes doubling with colchicines and is an excellent resource for desirable resistance genes to the pathogens and high protein content. Therefore, heterosis utilization on polyploidy is becoming a new strategy in rice breeding. At present, the main research on autotetraploid rice centralizes in China. Breeding effort has been made to improve autotetraploid rice genetically, however, the progresses are limited due to higher degree of divergence between hybrid sterility and polygenic nature. But to date, almost nothing is reported about the genetic diversity, original and genetic background of autotetraploid rice. Despite several reports on cytological analysis of the mechanisms of low seed set in autotetraploid rice still the results are inconclusive due to lack the statistical evaluation. Therefore, the study on the mechanisms of low seed set in autotetraploid is a priority for rice breeding. Microsatellites or simple sequence repeats (SSRs) are the widely used marker for estimating genetic diversity in many species, including wild, weedy, and cultivated rice. In our research, genetic diversity and population genetic structure of autotetraploid and diploid populations collected from Chengdu Institute of Biology, Chinese Academy of Sciences were studied based on 36 microsatellite loci. For the total of 50 varieties, a moderate to high level of genetic diversity was observed at population levels with the number of alleles per locus (Ae) ranging from 2 to 6 (mean 3.028) and PIC ranging from 0.04 to 0.76 (mean 0.366). The expected heterozygosity (He) varied from 0.04 to 0.76 with the mean of 0.370 and Shannon’s index (I) ranging from 0.098 to 1.613 (mean 0.649). The autotetraploid populations showed a slightly higher level of effective alleles, the expected heterozygosity and Shannon’s index than that of diploid populations. Rare alleles were observed at most of the SSR loci in one or more of the 50 accessions and core fingerprint database of the autotetraploid and diploid rice was constructed. The F-statistics showed that genetic variability mainly existed among autotetraploid populations rather than among diploid populations (Fst=0.066). Cluster analysis of the 50 accessions showed four major groups. Group I contained all of the autotetraploid and diploid indica maintainer lines and a autotetraploid and its original diploid indica male sterile lines. Groups II contained only original of IR accessions. Group III was more diverse than either group II or IV and comprised of both autotetraploid and diploid indica restoring lines. Group IV included japonica cluster of the autotetraploid and diploid rices. Furthermore, genetic differences at the single-locus and two-locus levels, as well as components due to allelic and gametic differentiation, were revealed between autotetraploid and diploid varieties. This analysis indicated that the gene pools of diploid and autotetraploid rice are somewhat dissimilar, which made a variation that distinguishes autotetraploid from diploid rices. Using this variation, we can breed new autotetraploid varieties with some new important agricultural characters but the diploid rice has not. Cytogenetic characteristics in restorer lines DTP-4, DMinghui63 and maintainer line D46B of autotetraploid rices were studied. DTP-4, DMinghui63 and D46B showed the advantage of high seed set and biological yield. The meiotic chromosome behavior was slightly irregular in DTP-4, DMinghui63 and D46B. We observed less univalent, trivalent and multivalent at MI, but more bivalent and quadrivalent were observed. The most frequent chromosome configurations were 12II 6IVand 10II 7IV in restorer and maintainer lines, respectively. The quadrivalent frequency of DTP-4 and Dminghui63 at metaphase(MI) was respectively 2.00/PMC and 2.26/PMC. However that frequency of D46B was 6.00/PMC, which was greatly significantly higher than DTP-4 and Dminghui63. That indicates the maintainer D46B has better chromosome pairing capability in metaphase (MI). The frequency of lagging chromosomes of the maintainer D46B at anaphaseI (AI) was 10.62%, which was significantly lower than that of DTP-4(19.44%) and Dminghui63(23.14%) and nearly reaching the level of diploid CK(7.30%). In telophaseI (TI) maintainer D46B showed lower frequency of microkernel at TI and lower frequency of abnormal spores at telophaseII(TII). We also studied pollen fertility, seed set and cytogenetic characteristics of restorer lines and F1 hybrids of autotetraploid rice. DTP-4, DMinghui63, D46A´DTP-4 and D46A´DMinghui63 showed significantly higher pollen fertility and seed set than DShixiang and D46A´DShixiang. Pairing configurations in PMC of DTP-4, DMinghui63, DShixiang, D46A´DTP-4, D46A´DMinghui63 and D46A´DShixiang were 0.05 I+19.96 II (9.89 rod+10.07 ring)+0.01 III+2.20 IV, 0.11 I+19.17 II (8.90 rod+10.37 ring)+0.09 III+2.26 IV+0.01 VI, 1.33 I+9.46 II (4.50 rod+4.96 ring)+0.44 III+6.02 IV+0.09 VI+0.09 VIII, 0.02 I+14.36 II (6.44 rod+7.91 ring)+0.01 III+4.80 IV+0.01V III, 0.06 I+17.67 II (11.01 rod+6.67 ring)+0.06 III+3.10 IV+0.01 VI and 1.11 I+11.31 II (5.80 rod+5.51 ring)+0.41 III+5.63 IV+0.03 VI+0.03 VIII, respectively. Configuration 16 II+4 IV and 12 II+6 IV occurred in the highest frequency among the autotetraploid restorers and hybrids. Meiotic chromosome behaviors were less abnormal in the tetraploids with high seed set than those with low seed set. The hybrids had fewer frequencies of bivalents, univalents, trivalents and multivalents than the restorers, but higher frequency of quatrivalents than the restorers at MI. The frequency of univalents at M1 had the most impact on pollen fertility and seed set, i.e., pollen fertility decreased with the increase of univalents. The secondary impact factors were trivalents and multivalents, and bivalents and quatrivalents had no effect on pollen fertility and seed set. The correlative relationship between pollen fertility and cytogenetic behaviors could be utilized to improve seed set in autotetraploidy breeding. The amylose content of autotetraploid indica mutant Rice D4063-1 dropped by half than diploid Minghui 63, that is, its amylose content of 5.23%.The whole sequence of Waxy gene of D4063-1 is amplified and sequenced. And the discrepancy of bases is found comparing to the reported Waxy gene. The Waxy gene of autotetraploid Rice D4063-1 had a base deletion in exon sequence, which resulted frameshift mutation in exon 9 and termination codon occur early. The mutation of Wx also led to the change of some common restriction endonuclease sites. Results showed compared to indica and japonica, D4063-1 had two adding sph1 sites. Compared to japonica, D4063-1 had six decreasing Acc1, a adding Xho1, Pst1 and Sal1 restriction sites. Phylogeny analysis shows that the DNA sequence of Waxy gene of D4063-1 is closer to Indica, and we suppose that the Waxy gene of D4063-1 is origin from genotype Wxa. In addition, according to the base differences of Wx in D4063-1, we deduce that RNA processing obstacle led by base change of intron is the main cause to low the amylose content, and related to phenotype of its soft rice. Based on analysis of fragments of D4063-1, indica and japonica and according to the special point of the three species, primers as markers-AUT4063-I were designed for distinguishing the D4063-1 from other rice. Combining with primer pair F5, dominant and codominant ways were established for discriminating them., rapid and correct identification of D4063-1 from other rice could be done. The genetic analysis is important to ensure the original of autotetraploid rice, for maintaining the “distinctiveness” of autotetraploid varieties, and to differentiate between the various genetic background of autotetraploid rice. The autotetraploid breeding will benefit from detailed analysis of genetic diversity in the germplasm collections. Further investigation on mechanisms of meiotic stability should benefit polyploid breeding. These findings demonstrated opportunity to improve meiotic abnormalities as well as grain fertilities in autotetraploid rice.

不同小麦品质类型与生态环境关系的研究

小麦（Triticum aestivum L.）是世界上种植面积最大，总产量最高，食物加工种类最丰富的粮食作物，占世界人口35 ％－40 ％的人们以此为主要食物。因此小麦产量的高低和品质的优劣直接影响人们对食物需求的安全和满意程度，也影响着人类的营养平衡以及面粉和食品加工业的发展。随着生活水平的提高，人们对于小麦的品质越来越重视。培育优质专用小麦新品种，制定优质专用小麦品种品质生态区划，从而在不同程度上实现小麦的区域化种植和产业化经营具有重要的意义。 影响小麦品质的因素主要是遗传因素和环境因素，其中环境因素又包括各种自然生态因素和人为因素。研究表明，小麦品质的环境间的差异大于品种间的差异，气候条件是影响小麦品质的最重要的因子，小麦品质的地域间的差异反映出了小麦的品质区域分布规律。为了满足市场对不同品质小麦的需求，对小麦进行区域化研究具有重要的理论和现实意义。本研究结合四川的地理、气候特点，研究不同品质类型与生态环境的关系，为在复杂的生态环境内进行品质区划提供依据。 本研究首先根据四川省小麦种植区域的生态特点，在四川省多个典型生态区：川南丘陵的荣县、川西南高原的西昌、川西平原的双流布点种植，采用的小麦试验材料为不同品质类型：中筋小麦川育12、川育14、川育16由本所提供；弱筋小麦川麦32和强筋小麦川麦36由四川省农科院作物所提供。通过研究品质性状与品种及各个生态因子包括地点、土壤土质差异等的关系，明确不同生态环境中适宜种植的小麦品种类型，强筋小麦、中筋小麦更适合于在荣县、双流地区种植，弱筋小麦更适合于在西昌地区种植，为品种品质区划奠定基础。 其次，选择了本课题组育成的稳定中间品系，对其品质性状SDS沉降值进行了多年测定。分析了品质性状SDS沉降值与多种气候因子的相关性，结果表明SDS沉降值与日均温、日照时数成正相关，与降水量成负相关，为品质育种提供了理论依据。 此外，以中筋小麦新品种小麦川育14为材料，应用三元二次正交旋转回归模型设计试验，研究主要栽培因子播期、密度和施肥量对产量的影响，并建立函数模型。经计算机模拟寻优，筛选出了高产高效栽培组合措施，并确定了置信域。结合四川省不同的地理情况，在平原和丘陵地区分别进行实验，并各自建立了高产高效栽培组合措施，为川育14品种的推广提供了理论指导。 Wheat is one of the most important crops in the world. About 35%-40% people all over the world, take the wheat as their most important food. So the quality, as well as the quantity of the wheat makes a direct effect on people’s demands of food and their satisfaction. It also effects on human’s healthy, and the development of the Food processing industry. With the development of the living standard, people pay more attention to the quality of wheat. So, we set a special ecology zoning for wheat. It is significant to carry out planting the wheat in special zoning in varying degrees. The main factors affecting wheat quality are heredity and environment including many ecological factors and the factors in cultivation. As to the quality，the difference between ecology and cultivation is more important than the difference between special wheat. In so many factors, climate is the most important one. From the difference in quality between different zones，we can conclude the rule of distribution abort quality of wheat. Finding out the intersection of numerous wheat not only can meet the demand of food production，but also has important signification in theory and realism。In our research, according to the complex geography in Sichuan province, we study the relationship between numerous kinds of quality characters in wheat and the ecology. So, we can set a foundation for more research. In this research, firstly, we plant wheat in some typical ecological regions of SICHUAN province: RONGXIAN（south of SC）、XICHANG（south of SC）, SHUANGLIU(west of SC). The materials of the experiments: ChuanYu12, ChuanYu14, ChuanYu16(from our institute), Chuanmai32, Chuanmai36 (from the Chinese academy of agriculture sciences of Sichuan. Through the research on the relationship between the quality of wheat and those ecology factors, we can make a definition that which area is perfect matched with which kind of wheat. And it can satisfy the demand of people. Secondly, select many sorts of wheat from our research group. All of them are selected and bred more than 3 years(2003-2005). And we make every-year determination as well. We’ve gotten SDS value from those 9, and various data on factors of climate. We also got to know the relation ship between those numbers. Thirdly, use Chuanyu14 as material, the mathematical model of the relation between the production of wheat and main agricultural measures such as date, density and fertilizer. The model was established by association of three elements two return, rotate and regression. We set a suitable model and get a suitable method which can make high harvest. Based on various kinds of geographical regions in Sichuan province, we set different models which can be used in plain and hill. So, we can plant Chuan Yu 14 in Sichuan province under the result in research.

2-D and 3-D processing and interpretation of multi-fold ground penetrating radar data:a case history from an archaeological site

A 2.5-D and 3-D multi-fold GPR survey was carried out in the Archaeological Park of Aquileia (northern Italy). The primary objective of the study was the identification of targets of potential archaeological interest in an area designated by local archaeological authorities. The second geophysical objective was to test 2-D and 3-D multi-fold methods and to study localised targets of unknown shape and dimensions in hostile soil conditions. Several portions of the acquisition grid were processed in common offset (CO), common shot (CSG) and common mid point (CMP) geometry. An 8×8 m area was studied with orthogonal CMPs thus achieving a 3-D subsurface coverage with azimuthal range limited to two normal components. Coherent noise components were identified in the pre-stack domain and removed by means of FK filtering of CMP records. Stack velocities were obtained from conventional velocity analysis and azimuthal velocity analysis of 3-D pre-stack gathers. Two major discontinuities were identified in the area of study. The deeper one most probably coincides with the paleosol at the base of the layer associated with activities of man in the area in the last 2500 years. This interpretation is in agreement with the results obtained from nearby cores and excavations. The shallow discontinuity is observed in a part of the investigated area and it shows local interruptions with a linear distribution on the grid. Such interruptions may correspond to buried targets of archaeological interest. The prominent enhancement of the subsurface images obtained by means of multi-fold techniques, compared with the relatively poor quality of the conventional single-fold georadar sections, indicates that multi-fold methods are well suited for the application to high resolution studies in archaeology.

Assessing the consequence of land use change on agricultural productivity in China

China's cultivated land has been undergoing dramatic changes along with its rapidly growing economy and population. The impacts of land use transformation on food production at the national scale, however, have been poorly understood due to the lack of detailed spatially explicit agricultural productivity information on cropland change and crop productivity. This study evaluates the effect of the cropland transformation on agricultural productivity by combining the land use data of China for the period of 1990-2000 from TM images and a satellite-based NPP (net primary production) model driven with NOAH/AVHRR data. The cropland area of China has a net increase of 2.79 Mha in the study period, which causes a slightly increased agricultural productivity (6.96 Mt C) at the national level. Although the newly cultivated lands compensated for the loss from urban expansion, but the contribution to production is insignificant because of the low productivity. The decrease in crop production resulting from urban expansion is about twice of that from abandonment of arable lands to forests and grasslands. The productivity of arable lands occupied by urban expansion was 80% higher than that of the newly cultivated lands in the regions with unfavorable natural conditions. Significance of cropland transformation impacts is spatially diverse with the differences in land use change intensity and land productivity across China. The increase in arable land area and yet decline in land quality may reduce the production potential and sustainability of China's agro-ecosystems. (C) 2008 Elsevier B.V. All rights reserved.

Evaluation for use efficiency of agricultural resources in grain production: A case study of Changshu, Taihe and Ansai in China

National Natural Science Foundation of China [70673097]

Tourism Potential of Agricultural Heritage Systems

Traditional agricultural systems are threatened world-wide mainly due to the introduction of modern agricultural techniques and the emigration of farm labourers from remote rural villages. The objective of the programme 'Globally Important Agricultural Heritage Systems' (GIAHS), initiated by the Food and Agriculture Organization (FAO) of the United Nations in 2002, is dynamic conservation of traditional agricultural systems. This article addresses the definition and content of agricultural heritage systems and discusses conservation options in the light of developing rural tourism. An explorative survey was conducted in Longxian village, situated in Zhejiang Province, southern China, focusing on the tourism potential of a typical Rice-Fish Agricultural System. The identification of heritage resources is a first step in the process of transforming an agricultural landscape into a cultural tourism landscape. However, the future of these landscapes is in the hands of a range of stakeholders and depends on their capacity to manage, in a sustainable way, tourism development strategies alongside conservation policies.

The temporal and spatial evaluation on China's agricultural policy output since 1978

Since reform and opening up, how much contribution has China's implementation of new agricultural policy made to agricultural output? This paper is trying to establish an agricultural policy output econometric model for doing a quantitative analysis of China's new agricultural policy. The results show that China's agricultural policies on agricultural output have an average contribution rate of about 7% since 1978, which is consistent with the OECD's basic forecast. There are obvious temporal and spatial differences. Generally speaking, we can divide the contribution of agricultural policy into three periods, which are the start-up phase from 1978 to 1991 (14 years), the stationary phase from 1992 to 2002 (11 years) and the rising phase from 2003 to 2008 (6 years). In space, the contribution of agricultural policy underwent a process from the all-low in the start-up phase, the gradual increase in the stationary phase to the all-high in the rising phase. Northern and western regions are more sensitive to policies. There are three major factors that can affect the contribution of regional agricultural policies, which are the process of national industrialization strategy, terrain and the level of local finance.

The Impact of Environmental Non-Tariff Measures on China's Agricultural Exports

This article assesses the impact of environmental non-tariff measures on China's agricultural exports. It uses two measures to show which countries make most intensive use of environmental non-tariff measures and which agricultural products exported by China are the most affected. Environmental non-tariff measures were most prevalence in Malaysia, Vietnam, Philippines, Mexico, Japan, Russian, USA, Germany, and Netherland. Labor-intensive agricultural products, such as fish, vegetables, and fruit were most seriously affected.